Interação entre odontologia restauradora e periodontia - parte 2: reanatomização dentária

The development of new dental materials has expanded dental therapeutic modalities ensuring excellence in aesthetic restorative treatments. Thus, the direct restorative procedures have been used in cases of dental reconstruction allowing an effective treatment with a low cost, while preserving healthy tooth structure. However, the clinician must be used to the techniques and the material in order to ensure longevity and success in the direct restorative procedure. The aim of this paper is to descrive, after completion of periodontal surgical procedures, the direct restorative step performed for dental reconstruction and diastema closure. The integration between Restorative Dentistry and periodontics enableb the restoration of a harmonious smile in a conservative manner, ensuring aesthetics and patient stisfaction.

Influência da reinstrumentação do degrau apical radicular após o posicionamento primário do cone principal de guta-percha noselamento apical

The aim of this study was to evaluate in vitro the apical leakage after the apical re-preparation and replacement of the principal gutta-percha point plus endodontic sealer (Sealer 26TM). Sixty extracted human canines were prepared by using a step back technique up to size 50 K type file apically. At each change of instrument the canals were irrigated with distilled water. After that step, the external surface roots were coated and subdivided into six groups with ten roots each: I – single gutta percha point technique; II – lateral condensation and III – hybrid technique. The IV, V and VI groups were similar to others groups but after to place the principal gutta percha point, it was removed, re-prepared up to size 60K file and in sequence replaced the principal gutta percha point and the root canal filling finished. The specimens were immersed in 2% Rhodamine BTM for 7 days at 37 oC. The apical leakage was measured by Image ToolsTM program. With Kruskal Wallis test statistical analysis showed that there was no significant difference between the techniques (p > 0.05).

Influência do cimento obturador e agente de irrigação final na infiltração marginal em situações de sobreobturações endodônticas

Objective: The objective of this paper was to verify if the final irrigation at 17% EDTA, separately or followed by chlorhexidine digluconate at 2% interferes on the apical marginal leakage in root canal overfilling, due to the use of two root canal filling materials (Sealer 26TM or SealapexTM). Methods: Forty lower incisors extracted, with a single root canal, were biomechanically prepared, at 2.0mm beyond the radicular apex, with ProTaper SystemTM, finishing it with the F3 instrument. Irrigation was accomplished with 1.0 mL NaOCl at 2.5% at each change of equipment caliper and, in the end, with 5.0 mL normal saline solution. After achieving this procedure, the foraminal channels was standardized with a file K 25 until its DO appears in the foraminal opening. From this moment, the teeth were subdivided into two groups of 20 specimens each, because of the final irrigation method used: I – irrigation with EDTA at 17% for 3min and II – identical protocol, thus, after EDTA aspiration at17%, it was again irrigated with chlorhexidine digluconate at 2%, also kept intra-canal for 3min. Each group was again sub-divided into two sub-groups (ten teeth each), according to the cement used (Sealer 26TM or SealapexTM), and filled by using a single gutta-percha F1 (ProTaperTM, Universal Filling), in such a manner that it goes 2.0 mm beyond the radicular apex. Soon after that, the teeth were immersed in Rhodamine BTM for 72h, vacuum and after the roots have been bucolingually grooved, the leakages marked were measured with program Image ToolTM. Results and Conclusions: The leakage magnitude was similar among themselves (p > 0.05), except for group Sealapex®, thus the final use with chlorhexidine reduced apical leakage (p < 0.05).

Marketing em odontologia: uma ferramenta que faz a diferença

The large number of dentists in Brazilian job market has increased the competitiveness in the dentistry field, leading the professional to use different strategies in an attempt to attract more patients. This study aimed to report different forms of dental marketing, showing how they can strengthen the bond between professional and patient, making it an alternative to face the competitive market. It was concluded that there are various marketing tools that can be applied in an effective and simple manner; since supported on ethics, it can make the dentist be highlighted, attracting and retaining patients and ensuring their professional success.

Imageologia na odontologia e aspectos legais

The technology, through the advent of new equipments that allow imaging exams, has helped very much in the diagnosis and prognosis of diseases in Dentistry. The use of informatics, in general, in the manufacture of clinical reports is increasingly present in the dental offices. The legal validity of these systems is questioned, and is matter of discussion. This work makes considerations about Imageology or Diagnostic by image, a new area that is appearing on Dentistry. Among other exams, there are: digital radiography, tomography, computed tomography, artomography, magnetic resonance, computed cefalometry and ultra-sonography. It permits the professional to obtain a better diagnostic, and to the patient, the visualization of his problem and treatment. A survey on the possibilities of using informatics in Dentistry, particularly in Radiology, was also carried out, as well as the legal aspects, which are in accordance with the Law 8.935/94, what guarantees its practicability. Digital Certification is a mechanism that provides legal validity to documents and, as such, to radiographic images and others. It is a procedure that the dentist should take to ensure that he/she has safeguarded the judicial proofs that may be necessary in an eventual demand.

Elaboração de um curso interativo voltado ao aprendizado de um sistema aplicativo em Odontologia, utilizando a plataforma Moodle

In universities, in any type of faculty or research institute, it is possible to observe innumerable informatics applications: database management, organization of catalogues, expediting diagnoses and many other applications. Within this context, distance learning could facilitate the learning of various professions. Distance education is the process of teaching-learning and the professional has to be prepared to deal with the new tools that are made available, using them to his/her benefit, and consequently in his/her professional capacity, to guarantee greater productivity and interaction with the various spheres in the work field. Methods: The aim of this research is to develop a course on the use of the Dentistry software application EasyDental, using the teaching at a distance methodology by means of the Moodle platform. The proposed course was composed of 14 modules, in order to enable a progressive and a rational learning. Conclusion: It could be concluded that this platform allowed the preparation of the proposed distance course, in a practical and versatile manner, considering the resources and activities it has. However, to use this platform, one must have dominion of the basic concepts of informatics, and the tools of the Moodle platform.

Métodos de avaliação de risco de desordens músculo-esqueléticas nos membros superiores voltados para a odontologia

The dental professionals are exposed to many risks of development of occupational diseases and the musculoskeletal disorders in the upper limbs are the most common disease. This problem may result in lower productivity and / or early retirement. Therefore, early diagnosis should be done through a reliable and valid system of risk assessment. Because of that, this study set out to conduct a review of the literature on methods of risk assessment of musculoskeletal disorders in the upper limbs in dental professionals. Conclusion: It was concluded that the available methods for assessing the risk of musculoskeletal disorders in dentistry are self-reports, observational and direct. Among these methods, the self-reports were frequently used to detect the risk of musculoskeletal disorders among dentists, dental students and professionals from the dental team. Further studies should be performed in dentistry using observational and direct methods.

Dificuldades relatadas por estudantes de odontologia diante de procedimentos relacionados à periodontia

Objective: This study aimed at evaluating the difficulties reported by last-year dentistry course students regarding basic and surgical periodontal procedures. Methods: A proposed questionnaire with 24 questions, 14 related to basic periodontal procedures and 10 to surgical procedures, was applied to 45 undergraduate students with jobs involving these procedures, during the practical activities of the Integrated Clinic Discipline, a compulsory subject in the curriculum of the course, taught to last-year students. Students were asked about their own perceptions of the difficulties in implementing the various steps related to the treatments. The degree of individual difficulty was determined according to the Likert scale: 0 = none, 1 = mild, 2 = moderate, 3 = high, 4 = very high. Exploratory analysis of data was applied, and the difficulty level was also dichotomized into none to mild (scores 0 and 1) and moderate to very high (scores 2–4). Results: Regarding the basic periodontal treatment, bone level probing was the procedure with the highest number of student difficulties (57.5%). As for the difficulties reported by students regarding the stages of periodontal surgery, only the procedures related to anesthesia and suture removal had no report of doubts. Conclusion: Periodontal surgery was the procedure involving the most prevalent questions reported as moderate to very high, and the indication for the most suitable surgical technique was the stage with the highest percentage of questions (66.6%) among the undergraduates.

Extensão universitária e trabalho voluntário na formação do acadêmico em odontologia

The aim of the present study was to point out the importance of the experience of undergraduate dental students in extra-curricular activities and volunteer work, as a means through which to gain essential knowledge and abilities for their professional lives. A literature review of the Medline, Scielo, and Lilacs databases was carried out in an attempt to select articles related to the university extension and volunteer work of undergraduate dental students. It is still extremely difficult to include university extension and volunteer work as an important activity in Dentistry courses. However, the presentday work market demands professionals who have expertise not only in dental techniques, but also in the socio-cultural characteristics of communities, considering that people need to be comprehensive in their psychosocial aspects in order to be treated as a complete professional. Therefore, university dentistry courses should give equal consideration to both oral rehabilitation skills and the promotion of general healthcare, acquired mainly through extracurricular activities, in an attempt to redeem the integral education of the healthcare professional. Moreover, students should pay closer attention to the opportunities offered during their undergraduate courses, as the work market for dentists is becoming more and more competitive. Moreover, the dentist whose professional life is limited to the dental office will most certainly forgo the opportunity to act in other social areas as well as the recognition that comes with such acts.

Capacidade de termoplastificação da guta-percha com diferentes conicidades

jObjective: The objective of this study was to evaluate the thermoplasticity of the gutta-percha cones used for root canal obturation: Dentsply convencional (Dentsply Ind. e Com., Petrópolis, RJ, Brazil), Dentsply 0.04, (Dentsply Ind. e Com., Petrópolis, RJ, Brazil), Antaeos 0.04 (VDW GmbH, Munich, Germany), ProTaper (Dentsply Ind. e Com., Petrópolis, RJ, Brazil) and Alfa 0.06 (VDW GmbH, Munich, Germany). Material and method: Specimens of each material (n = 10) were prepared after heating. After 24 hours were again heated to 70 °C and placed between two glass plates and subjected to a compression of 5 kg for 2 minutes. The scanned image of the groups before and after the compression was analyzed with the software Image Tool (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX, USA). The flow capacity of the different materials was determined by the difference between the initial and final area of each specimen. The results were submitted to ANOVA and Tukey test with significance level of 5%. Result: Among the material evaluated, the gutta-percha cones Alpha 0.06 and ProTaper presented more thermoplasticity than other groups (p < 0.05). The Dentsply gutta-percha presented thermoplasticity intermediate. The groups Dentsply 0.04 and 0.04 showed lower thermoplasticity after heating (p > 0.05). Conclusion: The gutta-percha present different property of thermoplasticity, which is important to selection of thermoplastic obturation techniques.

Effectiveness of gutta-percha and Resilon in filling lateral root canals using thermomechanical technique

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise físico-química do MTA e do cimento Portland associado a quatro diferentes radiopacificadores

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A presença da colaboração científica em pesquisas brasileiras: um estudo nas áreas de ciência da informação, matemática e odontologia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Citocompatibilidade, propriedades antibiofilme e físicas e cimentos endodônticos associados à amoxilina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Os distúrbios osteomusculares e suas consequências para os profissionais da odontologia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)