Use of high-resolution geophysical data to characterize heterogeneous aquifers: influence of data integration method on hydrological predictions

The integration of geophysical data into the subsurface characterization problem has been shown in many cases to significantly improve hydrological knowledge by providing information at spatial scales and locations that is unattainable using conventional hydrological measurement techniques. The investigation of exactly how much benefit can be brought by geophysical data in terms of its effect on hydrological predictions, however, has received considerably less attention in the literature. Here, we examine the potential hydrological benefits brought by a recently introduced simulated annealing (SA) conditional stochastic simulation method designed for the assimilation of diverse hydrogeophysical data sets. We consider the specific case of integrating crosshole ground-penetrating radar (GPR) and borehole porosity log data to characterize the porosity distribution in saturated heterogeneous aquifers. In many cases, porosity is linked to hydraulic conductivity and thus to flow and transport behavior. To perform our evaluation, we first generate a number of synthetic porosity fields exhibiting varying degrees of spatial continuity and structural complexity. Next, we simulate the collection of crosshole GPR data between several boreholes in these fields, and the collection of porosity log data at the borehole locations. The inverted GPR data, together with the porosity logs, are then used to reconstruct the porosity field using the SA-based method, along with a number of other more elementary approaches. Assuming that the grid-cell-scale relationship between porosity and hydraulic conductivity is unique and known, the porosity realizations are then used in groundwater flow and contaminant transport simulations to assess the benefits and limitations of the different approaches.

Antibiotic resistant bacteria/genes dissemination in lacustrine sediments highly increased following cultural eutrophication of Lake Geneva (Switzerland).

This study investigates faecal indicator bacteria (FIB), multiple antibiotic resistant (MAR), and antibiotic resistance genes (ARGs), of sediment profiles from different parts of Lake Geneva (Switzerland) over the last decades. MARs consist to expose culturable Escherichia coli (EC) and Enterococcus (ENT) to mixed five antibiotics including Ampicillin, Tetracycline, Amoxicillin, Chloramphenicol and Erythromycin. Culture-independent is performed to assess the distribution of ARGs responsible for, β-lactams (blaTEM; Amoxicillin/Ampicillin), Streptomycin/Spectinomycin (aadA), Tetracycline (tet) Chloramphenicol (cmlA) and Vancomycin (van). Bacterial cultures reveal that in the sediments deposited following eutrophication of Lake Geneva in the 1970s, the percentage of MARs to five antibiotics varied from 0.12% to 4.6% and 0.016% to 11.6% of total culturable EC and ENT, respectively. In these organic-rich bacteria-contaminated sediments, the blaTEM resistant of FIB varied from 22% to 48% and 16% to 37% for EC and ENT respectively, whereas the positive PCR assays responsible for tested ARGs were observed for EC, ENT, and total DNA from all samples. The aadA resistance gene was amplified for all the sediment samples, including those not influenced by WWTP effluent water. Our results demonstrate that bacteria MARs and ARGs highly increased in the sediments contaminated with WWTP effluent following the cultural eutrophication of Lake Geneva. Hence, the human-induced changing limnological conditions highly enhanced the sediment microbial activity, and therein the spreading of antibiotic resistant bacteria and genes in this aquatic environment used to supply drinking water in a highly populated area. Furthermore, the presence of the antibiotic resistance gene aadA in all the studied samples points out a regional dissemination of this emerging contaminant in freshwater sediments since at least the late nineteenth century.

Molecular evolutionary patterns in the Glomeromycota;

Abstract Arbuscular mycorrhizal fungi (AMF) form symbiosis with roots of approximately 80% of known land plants. These fungi play a key role in the ecology and adaptation of plants to various ecosystems.by increasing the plant resources for various nutrients. Despite their important ecological role, we still have poor understanding of their genetic structure and their molecular evolution. The work presented in this thesis aims to isolate and analyse AMF genes with various molecular techniques, in order to obtain new insights about their genetics, phylogeny and molecular evolution. Some AMF genes were shown through phylogenetic analyses to be more related with plants or mycoparasites than with other fungal organisms. These results led to the prediction that lateral gene transfers (LGT) occurred between AMF and plants during their long-term co-évolution. By phylogenetic and molecular analyses, in the chapter 2 I demonstrate that the hypothesis of LGT is most likely a consequence of analyses carried out on contaminant non AMF-DNA. In addition, various features characteristic of AMF genes have been determined, allowing researchers to scan their own sequence databases for potential non-AMF contaminants. Phylogenetic relationships of AMF with other fungi has been mostly analysed using molecular markers of ribosomal origin. In chapter 2 I successfully isolated gene encoding α- and ß-tubulins from several AMF genera. Consequently, phylogenetic analyses showed that AMF possess an unexpected relationship with ancestral aquatic fungi (chytrids). These results are consistent with the prediction stating that AMF may have played an important role in the colonisation of land by green plants through the establishment of a symbiosis and after the divergence of AMF from aquatic ancestors. In Chapter 4 I tried to isolate the entire AMF gene family encoding P-Type II ATPases, in order to determine their molecular evolution with the fungal kingdom. These genes were further analysed to detect the level of sequence polymorphism that is present within an AMF population. The results obtained show that mutational events previously thought as occurring only among divergent evolutionary lineages (gene duplications, indel mutations in coding regions) can occur within a single population of AMF. These results have far reaching consequences for our understanding of the genetics and ecology of AMF. Résumé Les champignons endomycorrhiziens arbusculaires (CEA) forment une symbiose racinaire avec environ 80% des plantes vasculaires connues. Ces champignons possèdent un rôle important dans l'écologie et l'adaptation des plantes au sein de différents écosystèmes en .augmentant leurs ressources en nutriments. Le travail présenté dans cette thèse se propose d'isoler et d'analyser certains gènes de CEA avec différentes techniques moléculaires à fin d'obtenir de pÌus amples informations concernant l'évolution moléculaire, la phylogénie et leur diversité génétique à diverses échelles taxonomiques. Certaines analyses phylogénétiques des CEA ont conduit à l'hypothèse que des transferts horizontaux de gènes (THG) ont pu avoir lieu durant leur longue co-évolution avec les plantes vasculaires. Dans le chapitre 2 de cette thèse nous démontrons par analyses moléculaire et phylogénétique que l'hypothèse de THG est une conséquence de contaminations à partir d'ADN de plante ou d'autres micro-organismes. De plus, de nombreuses caractéristiques moléculaires de CEA ont pu être déterminées, permettant la mise en place d'un plan à suivre lors de l'analyse de gènes de CEA dans les études futures. Les relations évolutives des. CEA avec d'autres champignons ont été analysées majoritairement à l'aide de marqueurs moléculaires d'origine ribosomiale. Dans les chapitres 2 et 3 j'ai isolé des gènes codant pour l'a- et la ß-tubuline chez différents genres, de CEA. Les analyses phylogénétiques ont démontré une parenté entre les CEA et des champignons aquatiques ancestraux (chytrides). Ces résultats sont en accord avec l'hypothèse selon laquelle les CEA ont probablement joué un rôle primordial dans l'établissement des plantes sur terre à travers une symbiose et suite à leur évolution à partir d'ancêtres vivant dans des milieux aquatiques: Dans le chapitre 4 j'ai isolé une entière famille de gènes chez les CEA codant des ATPases de la membrane plasmique, et étudié leur évolution moléculaire dans le règne des champignons. Ces mêmes gènes ont été analysés ultérieurement à fin de déterminer le degré de polymorphisme de séquence qui peut être présent au sein d'une population de CEA. Les résultats obtenus montrent que des évènements mutationnels considérés comme apparaissant exclusivement dans des lignées évolutives très divergentes (duplication de gènes, insertions/délétions dans des régions transcrites du génome) ont lieu sein d'une même population de CEA. Cette découverte a un impact important sur nos connaissances concernant la génétique des populations des CEA et leur écologie.

Detection of fat embolism in cases with postmortem angiography (PMA) - Preliminary results

Introduction: Pulmonary fat embolism (PFE) can be a cause of death in cases with trauma, during orthopedic surgery and also in non-traumatic conditions, such as burns, pancreatitis, fatty liver or sickle cell disease. As PMA becomes more widespread, it is important to determine how it affects the diagnosis of PFE. Aims: The aim of this study was to determine if the oily contrast liquid used in PMA induces artefactual PFE, if such artefacts differ from original PFE and if PFE can be detected and graded before PMA. Material and methods: Cases of adults without signs of postmortem change and for which an autopsy with angiography was performed were selected for this study. Pulmonary biopsies of each lung were taken before and after the angiography as were fragments of each lung with a twin-edged knife during the autopsy. The samples were examined under the microscope without fixation or staining and after an Oil-Red O staining. PFE was graded according to Falci et al. Results: Non-artefactual (original) PFE was diagnosed in 4 cases on pre-PMA biopsies. As expected, structures with the aspect of PFE were present in all cases after angiography. The microscopical aspect of original and PMA induced PFE was identical. Grading of the PFE according to Falci et al. was depending on the quality of the biopsies. Conclusions: PMA with oily contrast induces artefactual PFE that cannot be visually differentiated from original PFE. Original PFE can however be diagnosed with pre-angiography biopsies. In order to assure the diagnosis and correct grading of PFE, the quality of the biopsy should be checked before PMA with oily contrast.

State of Iowa Public Drinking Water Program 2006 Annual Compliance Report, June 2007

The Iowa Department of Natural Resources (IDNR) administers the Public Drinking Water Program in Iowa under delegation of authority from the United States Environmental Protection Agency (EPA). The 1996 re-authorized Safe Drinking Water Act (SDWA) requires that each state that has been granted primary implementation authority prepare an annual report on violations of national primary drinking water regulations within the state, make the report readily available to the public, and submit it to the EPA. This report fulfills this responsibility in Iowa for the 2006 calendar year, and includes violations of maximum contaminant levels, maximum residual disinfectant levels, treatment technique requirements, major monitoring or reporting requirements, action level exceedances, and operation certification requirements.

Integration of high-resolution geophysical data for the characterization of alluvial aquifers : new approaches and implications for hydrological predictions

Abstract Accurate characterization of the spatial distribution of hydrological properties in heterogeneous aquifers at a range of scales is a key prerequisite for reliable modeling of subsurface contaminant transport, and is essential for designing effective and cost-efficient groundwater management and remediation strategies. To this end, high-resolution geophysical methods have shown significant potential to bridge a critical gap in subsurface resolution and coverage between traditional hydrological measurement techniques such as borehole log/core analyses and tracer or pumping tests. An important and still largely unresolved issue, however, is how to best quantitatively integrate geophysical data into a characterization study in order to estimate the spatial distribution of one or more pertinent hydrological parameters, thus improving hydrological predictions. Recognizing the importance of this issue, the aim of the research presented in this thesis was to first develop a strategy for the assimilation of several types of hydrogeophysical data having varying degrees of resolution, subsurface coverage, and sensitivity to the hydrologic parameter of interest. In this regard a novel simulated annealing (SA)-based conditional simulation approach was developed and then tested in its ability to generate realizations of porosity given crosshole ground-penetrating radar (GPR) and neutron porosity log data. This was done successfully for both synthetic and field data sets. A subsequent issue that needed to be addressed involved assessing the potential benefits and implications of the resulting porosity realizations in terms of groundwater flow and contaminant transport. This was investigated synthetically assuming first that the relationship between porosity and hydraulic conductivity was well-defined. Then, the relationship was itself investigated in the context of a calibration procedure using hypothetical tracer test data. Essentially, the relationship best predicting the observed tracer test measurements was determined given the geophysically derived porosity structure. Both of these investigations showed that the SA-based approach, in general, allows much more reliable hydrological predictions than other more elementary techniques considered. Further, the developed calibration procedure was seen to be very effective, even at the scale of tomographic resolution, for predictions of transport. This also held true at locations within the aquifer where only geophysical data were available. This is significant because the acquisition of hydrological tracer test measurements is clearly more complicated and expensive than the acquisition of geophysical measurements. Although the above methodologies were tested using porosity logs and GPR data, the findings are expected to remain valid for a large number of pertinent combinations of geophysical and borehole log data of comparable resolution and sensitivity to the hydrological target parameter. Moreover, the obtained results allow us to have confidence for future developments in integration methodologies for geophysical and hydrological data to improve the 3-D estimation of hydrological properties.

State of Iowa Public Drinking Water Program 2008 Annual Compliance Report.

This report includes violations of maximum contaminant levels, maximum residual disinfectant levels, treatment technique requirements, action level exceedances, major monitoring or reporting requirements, and operation certification requirements of public water supplies in the state of Iowa.

Mechanisms of antifungal resistance in the opportunistic fungus Aspergillus fumigatus

ABSTRACT Aspergillus fumigatus is one of the most prevalent airbone fungal pathogen and can cause severe fatal invasive aspergillosis in immunocompromised patients. Several antifungal agents are available to treat these infections but with limited success. These agents include polyenes (amphotericin B), echinocandins (caspofungin) and azoles, which constitute the most important class with itraconazole (ITC) and voriconazole as major active compounds. Azole-derived antifungal agents target the ergosterol biosynthesis pathway via the inhibition of the lanosterol 14α-demethylase (cyp51/ERG1 1), a cytochrome P450 responsible for the conversion of lanosterol to ergosterol, which is the main component of cell membrane in fungi. A. fumigatus is also found in the environment as a contaminant of rotting plant or present in composting of organic waste. Among antifungal agents used in the environment for crop protection, the class of azoles is also widely used with propiconazole or prochloraz as examples. However, other agents such as dicarboximide (iprodione), phenylamide (benalaxyl) or strobilurin (azoxystrobin) are also used. Emergence of clinical azole-resistant isolates has been described in several European countries. However the incidence of antifungal resistance has not been yet reported in details in Switzerland. In this study, the status of antifungal resistance was investigated on A. fumigatus isolates collected from Swiss hospitals and from different environmental sites and. tested for their susceptibility to several currently used antifungal agents. The data showed a low incidence of resistance for all tested agents among clinical and environmental isolates. Only two azole-resistant environmental isolates were detected and none among the clinical tested isolates. In general, A. fumigatus was susceptible to all antifungals tested in our study, except to azoxystrobin which was the less active agent against all isolates. Since mechanisms of antifungal resistance have been poorly investigated until now in A. fumigatus, this work was aimed 1) to identify A. fumigatus genes involved in antifungal resistance and 2) to test their involvement in the development of resistance in sampled isolates. Therefore, this work proposed to isolate A. fumigatus genes conferring resistance to a drug-hypersusceptible Saccharomyces cerevisiae strain due to a lack of multidrug transporter genes. Several genes were recovered including three distinct efflux transporters (atrF, atrH and mdrA) and a bZip transcription factor, yapA. The inactivation of each transporter in A. fumigatus indicated that the transporters were involved in the basal level of azole susceptibility. The inactivation of YapA led to a hypersusceptibility to H2O2, thus confirming the involvement of this gene in the oxidative stress response of A. fumigatus. The involvement of the abovementioned transporters genes and of other transporters genes identified by genome analysis in azole resistance was tested by probing their expression in some ITC-resistant isolates. Even if upregulation of some transporters genes was observed in some investigated isolates, the correlation between azole resistance and expression levels of all these transporters genes could not be clearly established for all tested isolates. Given these results, the present work addressed 1) alteration in the expression of cyp51A encoding for the azole target enzyme, and 2) mutation(s) in the cyp51A sequence as potential mechanisms of azote resistance in A. . However, overexpression of cyp51A in the investigated isolates was not linked with azote resistance. Since it was reported that mutation(s) in cyp51A were participating in azote resistance in A. fumigatus, a functional complementation of cyp51A cDNAs from ITC-resistant A. fumigatus strains in S. cerevisiae ergl 1 Δ mutant strain was attempted. Expression in S. cerevisiae allowed the testing of these cDNAs with regards to their functionality and involvement in resistance to specific azote compounds. We could demonstrate that Cyp51A protein with a G54E or M220K mutations conferred resistance to specific azoles in S. cerevisiae, therefore suggesting that these mutations were important for the development of azote resistance in A. fumigatus. In conclusion, this work showed a correlation between ITC resistance and mechanisms involving overexpression of transporters and cyp51A mutations in A. fumigatus isolates. However, azole resistance of some isolates has not been solved and thus it will be necessary to approach the study of resistance mechanisms in this fungal species using alternative methodologies. RESUME Aspergillus fumigatus est un champignon opportuniste répandu et est la cause d'aspergilloses invasives le plus souvent fatales chez des patients immunodéprimés. Plusieurs antifongiques sont disponibles afin de traiter ces infections, cependant avec un succès limité. Ces agents incluent les polyènes (amphotericin B), les échinocandines (caspofungin) et les azoles, qui représentent la plus importante classe d'antifongiques avec l'itraconazole (ITC) et le voriconazole comme principaux agents actifs. Les dérivés azolés ciblent la voie de biosynthèse de l'ergostérol via l'inhibition de la lanostérol 14α-demethylase (cyp51/ERG11), un cytochrome P450 impliqué dans la conversion du lanostérol en ergostérol, qui est un composant important de la membrane chez les champignons. A. fumigatus est également répandu dans l'environnement. Parmi les antifongiques employés en agriculture afin de protéger les cultures, les azoles sont aussi largement utilisés. Cependant, d'autres agents tels que les dicarboximides (iprodione), les phenylamides (benalaxyl) et les strobilurines (azoxystrobin) peuvent être également utilisés. L'émergence de souches cliniques résistantes aux azoles a été décrite dans différents pays européens. Cependant, l'incidence d'une telle résistance aux azoles n'a pas encore été reportée en détails en Suisse. Dans ce travail, l'émergence de la résistance aux antifongiques a été étudiée par analyse de souches d'A. fumigatus provenant de milieux hospitaliers en Suisse et de différents sites et leur susceptibilité testée envers plusieurs antifongiques couramment utilisés. Les données obtenues ont montré une faible incidence de la résistance parmi les souches cliniques et environnementales pour les agents testés. Seulement deux souches environnementales résistantes aux azoles ont été détectées et aucune parmi les souches cliniques. Les mécanismes de résistance aux antifongiques ayant été très peu étudiés jusqu'à présent chez A. fumigatus , ce travail a eu aussi pour but 1) d'identifier les gènes d' A. fumigatus impliqués dans la résistance aux antifongiques et 2) de tester leur implication dans la résistance de certaines souches. Ainsi, il a été proposé d'isoler les gènes d' A. fumigatus pouvant conférer une résistance aux antifongiques à une souche de Saccharomyces cerevisiae hypersensible aux antifongiques. Trois transporteurs à efflux (atrF, atrH et mdrA) et un facteur de transcription appartenant à la famille des bZip (YapA) ont ainsi été isolés. L'inactivation, dans une souche d'A. fumigatus, de chacun des ces transporteurs a permis de mettre en évidence leur implication dans la susceptibilité d'A. fumigatus aux antifongiques. L'inactivation de YapA a engendré une hypersusceptibilité à l' H2O2, confirmant ainsi le rôle de ce gène dans la réponse au stress oxydatif chez A . fumigatus. La participation dans la résistance aux antifongiques des gènes codant pour des transporteurs ainsi que d'autres gènes identifiés par analyse du génome a été déterminée en testant leur niveau d'expression dans des souches résistantes à l'ITC. Bien qu'une surexpression de transporteurs ait été observée dans certaines souches, une corrélation entre la résistance à l'ITC et les niveaux d'expression de ces transporteurs n'a pu être clairement établie. Ce présent travail s'est donc porté sur l'étude de 2 autres mécanismes potentiellement impliqués dans la résistance aux azoles : 1) la surexpression de cyp51A codant pour l'enzyme cible et 2) des mutations dans cyp51A. Cependant, la surexpression de cyp51A dans les souches étudiées n'a pas été constatée. L'effet des mutations de cyp51A dans la résistance aux azoles a été testée par complémentation fonctionnelle d'une souche S. cerevisiae déletée dans son gène ERG11. L'expression de ces gènes chez S. cerevisiae a permis de démontrer que les protéines Cyp51Ap contenant une mutation G54E ou M220K pouvaient conférer une résistance spécifique à certains azoles, ainsi suggérant que ces mutations pourraient être importantes dans le développement d'une résistance aux azoles chez A. fumigatus. En conclusion, ce travail a permis de mettre en évidence, dans des souches d'A. fumigatus , une corrélation entre leur résistance à l' ITC et les mécanismes impliquant une surexpression de transporteurs et des mutations dans cyp51A. Cependant, ces mécanismes n'ont pu expliquer la résistance aux azoles de certaines souches et c'est pourquoi de nouvelles approches doivent être envisagées afin d'étudier ces mécanismes.

Postmortem whole-body CT angiography: evaluation of two contrast media solutions.

OBJECTIVE: The objective of our study was to establish a standardized procedure for postmortem whole-body CT-based angiography with lipophilic and hydrophilic contrast media solutions and to compare the results of these two methods. MATERIALS AND METHODS: Minimally invasive postmortem CT angiography was performed on 10 human cadavers via access to the femoral blood vessels. Separate perfusion of the arterial and venous systems was established with a modified heart-lung machine using a mixture of an oily contrast medium and paraffin (five cases) and a mixture of a water-soluble contrast medium with polyethylene glycol (PEG) 200 in the other five cases. Imaging was executed with an MDCT scanner. RESULTS: The minimally invasive femoral approach to the vascular system provided a good depiction of lesions of the complete vascular system down to the level of the small supplying vessels. Because of the enhancement of well-vascularized tissues, angiography with the PEG-mixed contrast medium allowed the detection of tissue lesions and the depiction of vascular abnormalities such as pulmonary embolisms or ruptures of the vessel wall. CONCLUSION: The angiographic method with a water-soluble contrast medium and PEG as a contrast-agent dissolver showed a clearly superior quality due to the lack of extravasation through the gastrointestinal vascular bed and the enhancement of soft tissues (cerebral cortex, myocardium, and parenchymal abdominal organs). The diagnostic possibilities of these findings in cases of antemortem ischemia of these tissues are not yet fully understood.

Double-tagged fluorescent bacterial bioreporter for the study of polycyclic aromatic hydrocarbon diffusion and bioavailability.

Bacterial degradation of polycyclic aromatic hydrocarbons (PAHs), ubiquitous contaminants from oil and coal, is typically limited by poor accessibility of the contaminant to the bacteria. In order to measure PAH availability in complex systems, we designed a number of diffusion-based assays with a double-tagged bacterial reporter strain Burkholderia sartisoli RP037-mChe. The reporter strain is capable of mineralizing phenanthrene (PHE) and induces the expression of enhanced green fluorescent protein (eGFP) as a function of the PAH flux to the cell. At the same time, it produces a second autofluorescent protein (mCherry) in constitutive manner. Quantitative epifluorescence imaging was deployed in order to record reporter signals as a function of PAH availability. The reporter strain expressed eGFP proportionally to dosages of naphthalene or PHE in batch liquid cultures. To detect PAH diffusion from solid materials the reporter cells were embedded in 2 cm-sized agarose gel patches, and fluorescence was recorded over time for both markers as a function of distance to the PAH source. eGFP fluorescence gradients measured on known amounts of naphthalene or PHE served as calibration for quantifying PAH availability from contaminated soils. To detect reporter gene expression at even smaller diffusion distances, we mixed and immobilized cells with contaminated soils in an agarose gel. eGFP fluorescence measurements confirmed gel patch diffusion results that exposure to 2-3 mg lampblack soil gave four times higher expression than to material contaminated with 10 or 1 (mg PHE) g(-1).

Occupational respiratory exposures to irritating and sensitizing volatile compounds deriving from cleaning products

Recent findings suggest an association between exposure to cleaning products and respiratory dysfunctions including asthma. However, little information is available about quantitative airborne exposures of professional cleaners to volatile organic compounds deriving from cleaning products. During the first phases of the study, a systematic review of cleaning products was performed. Safety data sheets were reviewed to assess the most frequently added volatile organic compounds. It was found that professional cleaning products are complex mixtures of different components (compounds in cleaning products: 3.5 ± 2.8), and more than 130 chemical substances listed in the safety data sheets were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%), skin (50%) and by ingestion (60%) were the most reported. Monoethanolamine, a strong irritant and known to be involved in sensitizing mechanisms as well as allergic reactions, is frequently added to cleaning products. Monoethanolamine determination in air has traditionally been difficult and air sampling and analysis methods available were little adapted for personal occupational air concentration assessments. A convenient method was developed with air sampling on impregnated glass fiber filters followed by one step desorption, gas chromatography and nitrogen phosphorous selective detection. An exposure assessment was conducted in the cleaning sector, to determine airborne concentrations of monoethanolamine, glycol ethers, and benzyl alcohol during different cleaning tasks performed by professional cleaning workers in different companies, and to determine background air concentrations of formaldehyde, a known indoor air contaminant. The occupational exposure study was carried out in 12 cleaning companies, and personal air samples were collected for monoethanolamine (n=68), glycol ethers (n=79), benzyl alcohol (n=15) and formaldehyde (n=45). All but ethylene glycol mono-n-butyl ether air concentrations measured were far below (<1/10) of the Swiss eight hours occupational exposure limits, except for butoxypropanol and benzyl alcohol, where no occupational exposure limits were available. Although only detected once, ethylene glycol mono-n-butyl ether air concentrations (n=4) were high (49.5 mg/m3 to 58.7 mg/m3), hovering at the Swiss occupational exposure limit (49 mg/m3). Background air concentrations showed no presence of monoethanolamine, while the glycol ethers were often present, and formaldehyde was universally detected. Exposures were influenced by the amount of monoethanolamine in the cleaning product, cross ventilation and spraying. The collected data was used to test an already existing exposure modeling tool during the last phases of the study. The exposure estimation of the so called Bayesian tool converged with the measured range of exposure the more air concentrations of measured exposure were added. This was best described by an inverse 2nd order equation. The results suggest that the Bayesian tool is not adapted to predict low exposures. The Bayesian tool should be tested also with other datasets describing higher exposures. Low exposures to different chemical sensitizers and irritants should be further investigated to better understand the development of respiratory disorders in cleaning workers. Prevention measures should especially focus on incorrect use of cleaning products, to avoid high air concentrations at the exposure limits. - De récentes études montrent l'existence d'un lien entre l'exposition aux produits de nettoyages et les maladies respiratoires telles que l'asthme. En revanche, encore peu d'informations sont disponibles concernant la quantité d'exposition des professionnels du secteur du nettoyage aux composants organiques volatiles provenant des produits qu'ils utilisent. Pendant la première phase de cette étude, un recueil systématique des produits professionnels utilisés dans le secteur du nettoyage a été effectué. Les fiches de données de sécurité de ces produits ont ensuite été analysées, afin de répertorier les composés organiques volatiles les plus souvent utilisés. Il a été mis en évidence que les produits de nettoyage professionnels sont des mélanges complexes de composants chimiques (composants chimiques dans les produits de nettoyage : 3.5 ± 2.8). Ainsi, plus de 130 substances listées dans les fiches de données de sécurité ont été retrouvées dans les 105 produits répertoriés. Les principales classes de substances chimiques identifiées étaient les parfums, les éthers de glycol, les agents de surface et les solvants; dans une moindre mesure, les phosphates, les sels, les détergents, les régulateurs de pH, les acides et les bases ont été identifiés. Plus de 75% des produits répertoriés contenaient des substances décrites comme irritantes (Xi), 64% nuisibles (Xn) et 28% corrosives (C). Les risques pour les yeux (59%), la peau (50%) et par ingestion (60%) était les plus mentionnés. La monoéthanolamine, un fort irritant connu pour être impliqué dans les mécanismes de sensibilisation tels que les réactions allergiques, est fréquemment ajouté aux produits de nettoyage. L'analyse de la monoéthanolamine dans l'air a été habituellement difficile et les échantillons d'air ainsi que les méthodes d'analyse déjà disponibles étaient peu adaptées à l'évaluation de la concentration individuelle d'air aux postes de travail. Une nouvelle méthode plus efficace a donc été développée en captant les échantillons d'air sur des filtres de fibre de verre imprégnés, suivi par une étape de désorption, puis une Chromatographie des gaz et enfin une détection sélective des composants d'azote. Une évaluation de l'exposition des professionnels a été réalisée dans le secteur du nettoyage afin de déterminer la concentration atmosphérique en monoéthanolamine, en éthers de glycol et en alcool benzylique au cours des différentes tâches de nettoyage effectuées par les professionnels du nettoyage dans différentes entreprises, ainsi que pour déterminer les concentrations atmosphériques de fond en formaldéhyde, un polluant de l'air intérieur bien connu. L'étude de l'exposition professionnelle a été effectuée dans 12 compagnies de nettoyage et les échantillons d'air individuels ont été collectés pour l'éthanolamine (n=68), les éthers de glycol (n=79), l'alcool benzylique (n=15) et le formaldéhyde (n=45). Toutes les substances mesurées dans l'air, excepté le 2-butoxyéthanol, étaient en-dessous (<1/10) de la valeur moyenne d'exposition aux postes de travail en Suisse (8 heures), excepté pour le butoxypropanol et l'alcool benzylique, pour lesquels aucune valeur limite d'exposition n'était disponible. Bien que détecté qu'une seule fois, les concentrations d'air de 2-butoxyéthanol (n=4) étaient élevées (49,5 mg/m3 à 58,7 mg/m3), se situant au-dessus de la frontière des valeurs limites d'exposition aux postes de travail en Suisse (49 mg/m3). Les concentrations d'air de fond n'ont montré aucune présence de monoéthanolamine, alors que les éthers de glycol étaient souvent présents et les formaldéhydes quasiment toujours détectés. L'exposition des professionnels a été influencée par la quantité de monoéthanolamine présente dans les produits de nettoyage utilisés, par la ventilation extérieure et par l'emploie de sprays. Durant la dernière phase de l'étude, les informations collectées ont été utilisées pour tester un outil de modélisation de l'exposition déjà existant, l'outil de Bayesian. L'estimation de l'exposition de cet outil convergeait avec l'exposition mesurée. Cela a été le mieux décrit par une équation du second degré inversée. Les résultats suggèrent que l'outil de Bayesian n'est pas adapté pour mettre en évidence les taux d'expositions faibles. Cet outil devrait également être testé avec d'autres ensembles de données décrivant des taux d'expositions plus élevés. L'exposition répétée à des substances chimiques ayant des propriétés irritatives et sensibilisantes devrait être investiguée d'avantage, afin de mieux comprendre l'apparition de maladies respiratoires chez les professionnels du nettoyage. Des mesures de prévention devraient tout particulièrement être orientées sur l'utilisation correcte des produits de nettoyage, afin d'éviter les concentrations d'air élevées se situant à la valeur limite d'exposition acceptée.

Numerical modeling of the effect of variation of boundary conditions on vadose zone hydraulic properties

An accurate estimation of hydraulic fluxes in the vadose zone is essential for the prediction of water, nutrient and contaminant transport in natural systems. The objective of this study was to simulate the effect of variation of boundary conditions on the estimation of hydraulic properties (i.e. water content, effective unsaturated hydraulic conductivity and hydraulic flux) in a one-dimensional unsaturated flow model domain. Unsaturated one-dimensional vertical water flow was simulated in a pure phase clay loam profile and in clay loam interlayered with silt loam distributed according to the third iteration of the Cantor Bar fractal object Simulations were performed using the numerical model Hydrus 1D. The upper and lower pressure heads were varied around average values of -55 cm for the near-saturation range. This resulted in combinations for the upper and lower constant head boundary conditions, respectively, of -50 and -60 cm, -40 and -70 cm, -30 and -80 cm, -20 and -90 cm, and -10 and -100 cm. For the drier range the average head between the upper and lower boundary conditions was set to -550 cm, resulting in the combinations -500 and -600 cm, -400 and -700 cm, -300 and -800 cm, -200 and -900 cm, and -100 and -1,000 cm, for upper and lower boundary conditions, respectively. There was an increase in water contents, fluxes and hydraulic conductivities with the increase in head difference between boundary conditions. Variation in boundary conditions in the pure phase and interlayered one-dimensional profiles caused significant deviations in fluxes, water contents and hydraulic conductivities compared to the simplest case (a head difference between the upper and lower constant head boundaries of 10 cm in the wetter range and 100 cm in the drier range).

Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor), which is citric acid 2 % (2 % CA) (Brasil, 2007b), is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl) (Brasil, 2007a). The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC), buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 %) and commercial granular zinc (142 %) and lower with brass slag I and II (67 and 27 %, respectively). The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no restriction, as well as for all other sources, in terms of contaminant levels of arsenic, cadmium, chromium, lead, and mercury as required by law (Normative Instruction No 27/2006). The implementation of 2nd extractor 2 % CA and the requirement of minimum solubility for industrial by-products could restrict the use of alternative sources as potential Zn sources for plants.

Detection and Characterization of Preferential Flow Paths in the Downstream Area of a Hazardous Landfill

We have used surface-based electrical resistivity tomography to detect and characterize preferential hydraulic pathways in the immediate downstream area of an abandoned, hazardous landfill. The landfill occupies the void left by a former gravel pit and its base is close to the groundwater table and lacking an engineered barrier. As such, this site is remarkably typical of many small- to medium-sized waste deposits throughout the densely populated and heavily industrialized foreland on both sides of the Alpine arc. Outflows of pollutants lastingly contaminated local drinking water supplies and necessitated a partial remediation in the form of a synthetic cover barrier, which is meant to prevent meteoric water from percolating through the waste before reaching the groundwater table. Any future additional isolation of the landfill in the form of lateral barriers thus requires adequate knowledge of potential preferential hydraulic pathways for outflowing contaminants. Our results, inferred from a suite of tomographically inverted surfaced-based electrical resistivity profiles oriented roughly perpendicular to the local hydraulic gradient, indicate that potential contaminant outflows would predominantly occur along an unexploited lateral extension of the original gravel deposit. This finds its expression as a distinct and laterally continuous high-resistivity anomaly in the resistivity tomograms. This interpretation is ground-truthed through a litholog from a nearby well. Since the probed glacio-fluvial deposits are largely devoid of mineralogical clay, the geometry of hydraulic and electrical pathways across the pore space of a given lithological unit can be assumed to be identical, which allows for an order-of-magnitude estimation of the overall permeability structure. These estimates indicate that the permeability of the imaged extension of the gravel body is at least two to three orders-of-magnitude higher than that of its finer-grained embedding matrix. This corroborates the preeminent role of the high-resistivity anomaly as a potential preferential flow path.