953 resultados para Natural research
Resumo:
In this work three natural waste materials containing chitin were used as adsorbents for textile dyestuffs, namely the Anodonta (Anodonta cygnea) shell, the Sepia (Sepia officinalis) and the Squid (Loligo vulgaris) pens. The selected dyestuffs were the Cibacron green T3G-E (CI reactive green 12), and the Solophenyl green BLE 155% (CI direct green 26), both from CIBA, commonly used in cellulosic fibres dyeing, the most used fibres in the textile industry. Batch equilibrium studies showed that the materials’ adsorption capacities increase after a simple and inexpensive chemical treatment, which increases their porosity and chitin relative content. Kinetic studies suggested the existence of a high internal resistance in both systems. Fixed bed column experiments performed showed an improvement in adsorbents’ behaviour after chemical treatment. However, in the column experiments, the biodegradation was the main mechanism of dyestuff removal, allowing the materials’ bioregeneration. The adsorption was strongly reduced by the pore clogging effect of the biomass. The deproteinised Squid pen (grain size 0.500–1.41 mm) is the adsorbent with highest adsorption capacity (0.27 and 0.037 g/g, respectively, for the reactive and direct dyestuffs, at 20ºC), followed by the demineralised Sepia pen and Anodonta shell, behaving like pure chitin in all experiments, but showing inferior performances than the granular activated carbon tested in the column experiments.
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, perfil de Engenharia Ecológica
Resumo:
Com as variações e instabilidade dos preços do petróleo, assim como as políticas europeias para adoção de estratégias para o desenvolvimento sustentável, têm levado à procura de forma crescente de novas tecnologias e fontes de energia alternativas. Neste contexto, tem-se assistido a políticas energéticas que estimulam o aumento da produção e a utilização do gás natural, visto que é considerado uma fonte de energia limpa. O crescimento do mercado do gás natural implica um reforço significativo das redes de transporte deste combustível, quer ao nível do armazenamento e fornecimento, quer ao nível dos gasodutos e da sua gestão. O investimento em gasodutos de transporte implica grandes investimentos, que poderiam não ser remunerados da forma esperada, sendo um dos motivos para que exista em Portugal cinco distritos se veem privados deste tipo de infraestruturas. O transporte de gás natural acarreta custos elevados para os consumidores, tanto maiores quanto maior forem as quantidades de gás transacionadas e quanto maior for o percurso pelo gás natural percorrido. Assim assume especial importância a realização de um despacho de gás natural: quais as cargas que cada unidade de fornecimento de gás irá alimentar, qual a quantidade de gás natural que cada UFGs deve injetar na rede, qual o menor percurso possível para o fazer, o tipo de transporte que será utilizado? Estas questões são abordadas na presente dissertação, por forma a minimizar a função custo de transporte, diminuindo assim as perdas na rede de alta pressão e os custos de transporte que serão suportados pelos consumidores. A rede de testes adotada foi a rede nacional de transporte, constituída por 18 nós de consumos, e os tipos de transporte considerados, foram o transporte por gasoduto físico e o transporte através de gasoduto virtual – rotas de transporte rodoviário de gás natural liquefeito. Foram criados diversos cenários, baseados em períodos de inverno e verão, os diferentes cenários abrangeram de forma distinta as variáveis de forma a analisar os impactos que estas variáveis teriam no custo relativo ao transporte de gás natural. Para dar suporte ao modelo de despacho económico, foi desenvolvida uma aplicação computacional – Despacho_GN com o objetivo de despachar as quantidades de gás natural que cada UFG deveria injetar na rede, assim como apresentar os custos acumulados relativos ao transporte. Com o apoio desta aplicação foram testados diversos cenários, sendo apresentados os respectivos resultados. A metodologia elaborada para a criação de um despacho através da aplicação “Despacho_GN” demonstrou ser eficiente na obtenção das soluções, mostrando ser suficientemente rápida para realizar as simulações em poucos segundos. A dissertação proporciona uma contribuição para a exploração de problemas relacionados com o despacho de gás natural, e sugere perspectivas futuras de investigação e desenvolvimento.
Resumo:
Dissertation presented to obtain the Ph.D. degree in Biology at the Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa.
Resumo:
In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.
Resumo:
Clayish earth-based mortars are been recognized, all over the world, as eco-efficient products for plastering. Apart from being a product with low embodied energy when compared to other types of plasters, their application on the interior surface of walls may give a strong contribution for the health and comfort of inhabitants. As part of an ongoing research regarding earth-based plasters this work assesses the influence of the addition of two types of natural fibres – oat straw and typha fiber-wool – on the characteristics of plastering mortars made with a clayish earth. Mechanical and physical characteristics were tested, showing that addition of these fibers contribute to decrease linear drying shrinkage and thermal conductivity, as well as promoting the adhesion strength of plaster to the substrate. The improvement of mechanical resistance reveal to be dependent on the type of fiber added while the hygroscopic capacity of the plaster is maintained regardless of the fiber additions.
Resumo:
INTRODUCTION: The present study shows a descriptive analysis of triatomine occurrence and its natural Trypanosoma infection rates in the state of Pernambuco, Brazil, between 2006 and 2007. METHODS: Entomological data for the species, such as specimens captured in both intra and peridomiciles and natural infection index, were obtained via domiciliary capture in 147 municipalities from 11 Regional Managements of Health. The database was obtained from a sample of insects (100% infected and 20% non-infected) sent to the Central Laboratory of Pernambuco. RESULTS: A total of 18,029 triatomines were analyzed from 138 municipalities of the state. Triatoma pseudomaculata (35%), Triatoma brasiliensis (34%), and Panstrongylus lutzi (25%) were the most captured species. These species also showed a widespread geographical distribution in the state. Panstrongylus megistus, Triatoma petrocchiae, Triatoma melanocephala, Triatoma sordida, Rhodnius nasutus, Rhodnius neglectus, and Triatoma infestans showed more limited geographical distribution and lower relative abundance. The parasitological research showed that 8.8% of the triatomines were naturally infected with flagellates morphologically similar to Trypanosoma cruzi and 91.3% of them were captured inside houses in 113 municipalities. P. lutzi showed the highest rates of natural infection. CONCLUSIONS: After the control of T. infestans, synanthropic species, such as T. brasiliensis, T. pseudomaculata, and P. lutzi, maintain the risk of T. cruzi transmission to humans in the state of Pernambuco. These species are widely distributed, and infected specimens have been found inside houses. Thus, an enhanced surveillance and vector control of Chagas disease is recommended in Pernambuco.
Resumo:
NSBE - UNL
Resumo:
Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.
Resumo:
The growing concerns regarding the environmental impact generated by the use of inorganic materials in different fields of application increased the interest towards products based on materials with low environmental impact. In recent years, researchers have turned their attention towards the development of materials obtained from renewable sources, easily recoverable or biodegradable at the end of use. In the field of civil structures, a few attempts have been done to replace the most common composites (e.g. carbon and glass fibers) by materials less harmful to the environment, as natural fibers. This work presents a comprehensive experimental research on the mechanical performance of natural fibers for the strengthening of masonry constructions. Flax, hemp, jute, sisal and coir fibers have been investigated both from physical and mechanical points of view. The fibers with better performance were tested together with three different matrices (two of organic nature) in order to produce composites. These experimental results represent a useful database for understanding the potentialities of natural fibers as strengthening systems.
Resumo:
Current societal challenges increasingly demand the need to seek for efficient and sustainable solutions to daily problems. Construction, as a result of its activity, is one of the main responsible industry for the exploitation of resources and greenhouse gas emissions. In this way, several research works are being undertaken to change some of the current practices. This paper presents the work being done at University of Minho to study de degradation of natural fibers when used as a sustainable solution for soil reinforcement. Jute and sisal fibrous structures (0º/90º) were studied in terms of their degradation over time, when incorporated into soil and when subject to accelerated aging tests in a QUV weathering test equipment. Results show that the process of biodegradation of natural fibers is clearly accelerated by the action of temperature, moisture and solar radiation, explaining further degradation of jute and sisal fibers when exposed to these factors, although more pronounced in jute fabric structures.
Resumo:
When combined at particular molar fractions, sugars, aminoacids or organic acids a present a high melting point depression, becoming liquids at room temperature. These are called Natural Deep Eutectic Solvents – NADES and are envisaged to play a major role on the chemical engineering processes of the future. Nonetheless, there is a significant lack of knowledge of its fundamental and basic properties, which is hindering their industrial applications. For this reason it is important to extend the knowledge on these systems, boosting their application development [1]. In this work, we have developed and characterized NADES based on choline chloride, organic acids, amino acids and sugars. Their density, thermal behavior, conductivity and polarity were assessed for different compositions. The conductivity was measured from 0 to 40 °C and the temperature effect was well described by the Vogel-Fulcher-Tammann equation. The morphological characterization of the crystallizable materials was done by polarized optical microscopy that provided also evidence of homogeneity/phase separation. Additionally, the rheological and thermodynamic properties of the NADES and the effect of water content were also studied. The results show these systems have Newtonian behavior and present significant viscosity decrease with temperature and water content, due to increase on the molecular mobility. The anhydrous systems present viscosities that range from higher than 1000Pa.s at 20°C to less than 1Pa.s at 70°C. DSC characterization confirms that for water content as high as 1:1:1 molar ratio, the mixture retains its single phase behavior. The results obtained demonstrate that the NADES properties can be finely tunned by careful selection of its constituents. NADES present the necessary properties for use as extraction solvents. They can be prepared from inexpensive raw materials and tailored for the selective extraction of target molecules. The data produced in this work is hereafter importance for the selection of the most promising candidates avoiding a time consuming and expensive trial and error phase providing also data for the development of models able to predict their properties and the mechanisms that allow the formation of the deep eutectic mixtures.
Resumo:
The occurrence of anaerobic oxidation of methane (AOM) and trace methane oxidation (TMO) was investigated in a freshwater natural gas source. Sediment samples were taken and analyzed for potential electron acceptors coupled to AOM. Long-term incubations with 13C-labeled CH4 (13CH4) and different electron acceptors showed that both AOM and TMO occurred. In most conditions, 13C-labeled CO2 (13CO2) simultaneously increased with methane formation, which is typical for TMO. In the presence of nitrate, neither methane formation nor methane oxidation occurred. Net AOM was measured only with sulfate as electron acceptor. Here, sulfide production occurred simultaneously with 13CO2 production and no methanogenesis occurred, excluding TMO as a possible source for 13CO2 production from 13CH4. Archaeal 16S rRNA gene analysis showed the highest presence of ANME-2a/b (ANaerobic MEthane oxidizing archaea) and AAA (AOM Associated Archaea) sequences in the incubations with methane and sulfate as compared with only methane addition. Higher abundance of ANME-2a/b in incubations with methane and sulfate as compared with only sulfate addition was shown by qPCR analysis. Bacterial 16S rRNA gene analysis showed the presence of sulfate-reducing bacteria belonging to SEEP-SRB1. This is the first report that explicitly shows that AOM is associated with sulfate reduction in an enrichment culture of ANME-2a/b and AAA methanotrophs and SEEP-SRB1 sulfate reducers from a low-saline environment.
Resumo:
Las didácticas específicas de las ciencias naturales revelan diferentes problemáticas en su enseñanza y aprendizaje en los diferentes niveles del sistema educativo. En particular, en las clases de ciencias la interacción discursiva docente alumnos adquiere relevancia, ya que el proceso de comunicación del conocimiento es uno de los pilares didácticos, junto a la trasposición del mismo. Especificamente, en este proyecto nos abocamos a aquellas intervenciones de docentes y alumnos que se relacionan con la construcción del conocimiento biológico y químico. El proyecto se enmarca en una actual linea de trabajo que indaga sobre las dificultades en los abordajes del conocimiento científico en las aulas, las características del discurso entre docentes y alumnos, las habilidades y dificultades en la comprensión de los enunciados de problemas y las características de los textos que se utilizan en las clases. Se focaliza este estudio en casos que intentan dar respuesta a tres temáticas, agrupadas en un conjunto de situaciones de investigación relacionadas con la interacción discursiva docente-alumno, retomando el rol del docente al hablar, guiar o diseñar las situaciones de referencia para el aprendizaje de los alumnos. Los casos son: 1- En cuanto a las concepciones sobre diversidad biológica en estudiantes de escuela secundaria y en textos académicos, atendemos a cómo la escuela presenta los contenidos ecológicos como un conjunto de dogmas y conceptos estáticos. Además suelen simplificarse conceptualmente y presentarse poco actualizados. Es por ello que se planea estudiar las concepciones y actitudes de los alumnos de secundaria sobre la biodiversidad, cómo estas dificultan su comprensión y los textos usados en relación a la promoción de la transposición didáctica. 2- En relación a cómo se elabora el patrón temático del tema célula en clases de Biología, se analizarán las diferentes estrategias de significados y de desarrollo temático, que se emplean en la comunicación aulica. Se intentará establecer si hay cambios en el desarrollo temático a medida que se avanza en la escolaridad. Esto es porque se puede apreciar que muchos de los problemas de aprendizaje del alumnado se deben a un desconocimiento tanto del patrón temático como del patrón estructural de la ciencia, siendo preciso evocar los patrones temáticos que se quieren utilizar, para construir un conocimiento compartido. 3-Finalmente, en los enunciados de problemas de Química, se analizarán las dificultades de comprensión lectora de alumnos de Ingeniería. Los docentes frecuentemente atribuyen los problemas a deficiencias en la instrucción recibida, sin considerarse los conocimientos previos del alumno, los obstáculos conceptuales originados en el tema, las deficiencias en la habilidad lectora, el tipo textual predominante en la consigna, el formato en el que se escribió la consigna y los factores personales, etc., siendo que la comprensión del enunciado de una consigna de trabajo condiciona fuertemente la posibilidad de su resolución. Los tres casos utilizarán metodologías cualitaritas que incluyan análisis de contenido en discursos orales y escritos. Los datos se registrarán desde observación no participante, registro etnográfico y con grabaciones de audio. Se espera contribuir al conocimiento, realizando aportes a la formación docente en tanto las estrategias discursivas que se emplean en el aula, en forma oral y en la escrita, conocer concepciones que dificultan o favoren la construcción del conocimiento científico, entre otras. Los productos de estos estudios estarán integrados por nuevos desarrollos para la formación docente, publicaciones científicas de impacto nacional e internacional, presentaciones a congresos, materiales didácticos y divulgativos, dictado de seminarios y/o cursos, redacción de informes a las escuelas intervinientes.. The specific Natural Sciences didactics show different problems in teaching and learning along the school system. In particular, the discourse used to communicate knowledge in Science lessons becomes important. With this project we will focus on the teachers and students actions regarding the construction of biological and chemical knowledge. This project attempts to answer these issues and brings together a range of research situations related to teacher-student interaction, through discourse, taking up the role of the teacher to speak, to plan and to guide student learning. We will study the ideas and attitudes of high school students about biodiversity that make difficult its understanding and the textbooks used in relation to promotion of the didactic transposition. In addition, regarding how the thematic pattern in biology classes is costructed, it will be analyzed the different meaning and thematic development strategies that are used in communication. We will attempt to establish whether there are any changes in the thematic development throughout high school education. Finally, we will analyze the reading comprehension problems in engineering students. Teachers frequently attribute these issues to deficiencies in prior education, without considering the students background, the conceptual obstacles arising in the field, the format in which the prompt is written, personal factors, etc., keeping in mind that the outcome of an activity is strictly dependant con the prompt understanding. We expect to make contributions to the teacher education in both the discourse strategies used in the classroom, orally and in writing, to learn about the conceptions that hinder or favor the knowledge construction, among others. The products of this study will be national and international impact scientific publications, conference presentations, popular science publications, seminars courses and reports to the schools involeved.
Resumo:
v.34:no.28(1954)