Monitoring the ex-vivo expansion of human mesenchymal stem/stromal cells in xeno-free microcarrier-based reactor systems by MIR spectroscopy

Human mesenchymal stem/stromal cells (MSCs) have received considerable attention in the field of cell-based therapies due to their high differentiation potential and ability to modulate immune responses. However, since these cells can only be isolated in very low quantities, successful realization of these therapies requires MSCs ex-vivo expansion to achieve relevant cell doses. The metabolic activity is one of the parameters often monitored during MSCs cultivation by using expensive multi-analytical methods, some of them time-consuming. The present work evaluates the use of mid-infrared (MIR) spectroscopy, through rapid and economic high-throughput analyses associated to multivariate data analysis, to monitor three different MSCs cultivation runs conducted in spinner flasks, under xeno-free culture conditions, which differ in the type of microcarriers used and the culture feeding strategy applied. After evaluating diverse spectral preprocessing techniques, the optimized partial least square (PLS) regression models based on the MIR spectra to estimate the glucose, lactate and ammonia concentrations yielded high coefficients of determination (R2 ≥ 0.98, ≥0.98, and ≥0.94, respectively) and low prediction errors (RMSECV ≤ 4.7%, ≤4.4% and ≤5.7%, respectively). Besides PLS models valid for specific expansion protocols, a robust model simultaneously valid for the three processes was also built for predicting glucose, lactate and ammonia, yielding a R2 of 0.95, 0.97 and 0.86, and a RMSECV of 0.33, 0.57, and 0.09 mM, respectively. Therefore, MIR spectroscopy combined with multivariate data analysis represents a promising tool for both optimization and control of MSCs expansion processes.

INVESTIGATION OF BIOFILM FORMATION IN COAGULASE-NEGATIVE STAPHYLOCOCCI ISOLATED FROM PLATELET CONCENTRATE BAGS

Platelet Concentrates (PCs) are the blood components with the highest rate of bacterial contamination, and coagulase-negative staphylococci (CoNS) are the most frequently isolated contaminants. This study investigated the biofilm formation of 16 contaminated units out of 691 PCs tested by phenotypic and genotypic methods. Adhesion in Borosilicate Tube (ABT) and Congo Red Agar (CRA) tests were used to assess the presence of biofilm. The presence of icaADC genes was assessed by means of the Polymerase Chain Reaction (PCR) technique. With Vitek(r)2, Staphylococcus haemolyticus was considered the most prevalent CoNS (31.25%). The CRA characterized 43.8% as probable biofilm producers, and for the ABT test, 37.5%. The icaADC genes were identified in seven samples by the PCR. The ABT technique showed 85.7% sensitivity and 100% specificity when compared to the reference method (PCR), and presented strong agreement (k = 0.8). This study shows that species identified as PCs contaminants are considered inhabitants of the normal skin flora and they might become important pathogens. The results also lead to the recommendation of ABT use in laboratory routine for detecting biofilm in CoNS contaminants of PCs.

BIOFILM FORMATION OF Vibrio cholerae ON STAINLESS STEEL USED IN FOOD PROCESSING

Vibrio cholerae represents a significant threat to human health in developing countries. This pathogen forms biofilms which favors its attachment to surfaces and its survival and transmission by water or food. This work evaluated the in vitro biofilm formation of V. cholerae isolated from clinical and environmental sources on stainless steel of the type used in food processing by using the environmental scanning electron microscopy (ESEM). Results showed no cell adhesion at 4 h and scarce surface colonization at 24 h. Biofilms from the environmental strain were observed at 48 h with high cellular aggregations embedded in Vibrio exopolysaccharide (VPS), while less confluence and VPS production with microcolonies of elongated cells were observed in biofilms produced by the clinical strain. At 96 h the biofilms of the environmental strain were released from the surface leaving coccoid cells and residual structures, whereas biofilms of the clinical strain formed highly organized structures such as channels, mushroom-like and pillars. This is the first study that has shown the in vitro ability of V. cholerae to colonize and form biofilms on stainless steel used in food processing.

Acidogenic digestion of effluents of the cheese industry in packed bed biofilm reactors

Dissertation for the Master degree in Biotechnology

Acetalização de glicerol e fenilacetaldeído assistida por pervaporação em reactor de membrana catalítica

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Contribuição para o estudo da modelação da digestão anaeróbia de resíduos sólidos, estudo da influência da geometria do reactor na cinética do processo

O presente trabalho tem como objectivo contribuir para o estudo do desenvolvimento de um modelo matemático aplicado à digestão anaeróbia de resíduos sólidos, que incorpore os condicionamentos da geometria dos reactores e a sua influência na cinética do processo biológico. Nesse sentido, o trabalho propõe-se avaliar o comportamento cinético de três reactores, com o mesmo volume mas com diferentes relações tridimensionais, utilizando o mesmo substrato, e idênticos parâmetros ambientais e operacionais de funcionamento. Pretendeu-se estudar em que medida a relação do comprimento, largura e altura de um reactor pode interferir nas taxas de remoção de substrato, condicionando a respectiva difusão na biomassa e crescimento dos microrganismos. Considera-se que este aspecto é do maior interesse para o desenvolvimento de um modelo cinético, podendo minimizar desvios inerentes à própria modelação de processos biológicos complexos. A geometria do reactor, que se correlaciona com uma determinada relação tridimensional, pode constituir um parâmetro importante, que se designou por Kcig (Constante de Inibição Geométrica), dada a influência que poderá exercer na cinética do processo biológico. A sua avaliação, parametrização e consequente modelação, deverá facilitar a escolha da relação comprimento/largura/altura mais adequada, de forma a optimizar o funcionamento operacional do reactor. O plano experimental desenvolveu-se em duas fases, utilizando-se dois substratos com graus distintos de dificuldade de utilização pelos microrganismos, nomeadamente: Fase 1 (glucose), Fase 2 (FORSU e relva). Concluiu-se que a cinética do processo é influenciada pela relação entre as áreas de separação de biogás/biomassa (As) e de contacto biomassa/reactor (Ac), que interferem na geometria do reactor. Assim, através dos resultados das fases 1 e 2 pode observar-se que a variação da taxa de remoção de substrato se aproxima de uma função de saturação, pelo que se propõe uma adaptação do modelo de Monod, através de um formalismo que incorpora uma grandeza adimensional, Kcig, para reflectir o efeito da geometria do reactor. Verificou-se que a equação adoptada para Kcig se mostrou adequada, o que permitiu, através do modelo de Monod ajustado, estimar os valores de rx máx e Ks que se admite estarem mais próximos dos verdadeiros, embora se considere que apenas se pretende corrigi-los em função do efeito da geometria do reactor. Por outro lado, o estudo permitiu identificar um valor de Kcig para o reactor de 2,5 L, a partir do qual poderá não ser interessante a relação entre a taxa de remoção de substrato e a área de construção do reactor.

Metanólise de óleo de soja em biodiesel através de um reactor de membrana

Com o aumento das necessidades energéticas, bem como dos cada vez mais conhecidos efeitos nocivos dos combustíveis fósseis, tornou-se imperativo pesquisar e desenvolver alternativas sustentáveis e verdes a esses recursos. O biodiesel é considerado como o melhor substituto para o combustível diesel convencional de base petroquímica. A transesterificação de óleos vegetais revela-se como uma importante via de obtenção do biodiesel. Na produção de biodiesel com catalisadores básicos homogéneos, como o hidróxido de sódio, deparamo-nos com um problema na hidrólise de triglicéridos, levando à formação de sabões e emulsões. Mesmo quando são usados reagentes secos, há formação de água devido à reacção do hidróxido com o álcool. Estes problemas podem ser solucionados com a utilização de catalisadores heterogéneos. Este estudo incidiu na preparação de membranas catalíticas de álcool polivinílico (PVA) incorporadas com um catalisador heterogéneo sólido básico (óxido de cálcio) obtido de resíduos industriais (casca de ovo). Caracterizaram-se as membranas catalíticas através da determinação da espessura, ângulos de contacto, grau de inchamento e espectroscopia de infravermelho. As membranas de PVA foram testadas na metanólise de óleo de soja em reactor batch e reactor de membrana catalítica. Estudou-se o efeito da reticulação química e por irradiação gama, nas propriedades das membranas e na actividade catalítica.

Projecto de um bio-reactor para cultura celular em membranas tubulares

O Grupo de Engenharia de Tecidos da FCT/UNL desenvolve e produz membranas poliméricas tubulares biodegradáveis que servem de substrato a culturas celulares e que se destinam a substituir temporariamente vasos sanguíneos danificados. O objectivo desta dissertação foi o desenvolvimento de um bio-reactor com a capacidade de bombeamento controlado de um fluido adequado à manutenção de uma cultura celular, que simula a passagem do fluxo sanguíneo pelo interior das membranas tubulares, permitindo que as células nelas semeadas recebam os estímulos adequados ao seu desenvolvimento. Foi construído um bio-reactor de perfusão pulsátil para cultura celular em membranas tubulares que é instalável numa incubadora, beneficiando assim de condições ambientais — pH, temperatura e humidade — semelhantes às fisiológicas. O bio-reactor é capaz de gerar estímulos mecânicos pulsáteis favoráveis ao alinhamento de células endoteliais e de músculo liso. O sistema foi desenvolvido de modo a que a pressão e o caudal aplicados às membranas pudessem ser monitorizados e controlados. Foram semeadas células endoteliais em matrizes planas de policaprolactona, tendo-se confirmado a sua adesão e proliferação por microscopia de fluorescência. Após enrolamento, obtiveram-se duas membranas tubulares com células endoteliais semeadas no lúmen. Uma delas foi submetida a cultura estática, e outra a cultura dinâmica no bio-reactor. Após 10 dias de condicionamento in vitro, as membranas foram novamente observadas por microscopia de fluorescência. Os resultados obtidos não foram conclusivos, pelo que serão necessários novos estudos para concluir se o bio-reactor construído é capaz de garantir o condicionamento mecânico das células semeadas nas matrizes.

Rifampicin fails to eradicate mature biofilm formed by methicillin-resistant Staphylococcus aureus

INTRODUCTION: Antimicrobial activity on biofilms depends on their molecular size, positive charges, permeability coefficient, and bactericidal activity. Vancomycin is the primary choice for methicillin-resistant Staphylococcus aureus (MRSA) infection treatment; rifampicin has interesting antibiofilm properties, but its effectivity remains poorly defined. METHODS: Rifampicin activity alone and in combination with vancomycin against biofilm-forming MRSA was investigated, using a twofold serial broth microtiter method, biofilm challenge, and bacterial count recovery. RESULTS: Minimal inhibitory concentration (MIC) and minimal bactericidal concentration for vancomycin and rifampicin ranged from 0.5 to 1mg/l and 0.008 to 4mg/l, and from 1 to 4mg/l and 0.06 to 32mg/l, respectively. Mature biofilms were submitted to rifampicin and vancomycin exposure, and minimum biofilm eradication concentration ranged from 64 to 32,000 folds and from 32 to 512 folds higher than those for planktonic cells, respectively. Vancomycin (15mg/l) in combination with rifampicin at 6 dilutions higher each isolate MIC did not reach in vitro biofilm eradication but showed biofilm inhibitory capacity (1.43 and 0.56log10 CFU/ml reduction for weak and strong biofilm producers, respectively; p<0.05). CONCLUSIONS: In our setting, rifampicin alone failed to effectively kill biofilm-forming MRSA, demonstrating stronger inability to eradicate mature biofilm compared with vancomycin.

Antibacterial, anti-swarming and anti-biofilm formation activities of Chamaemelum nobile against Pseudomonas aeruginosa

AbstractINTRODUCTION:Chamomile ( Chamaemelum nobile ) is widely used throughout the world, and has anti-inflammatory, deodorant, bacteriostatic, antimicrobial, carminative, sedative, antiseptic, anti-catarrhal, and spasmolytic properties. Because of the increasing incidence of drug-resistant bacteria, the development of natural antibacterial sources such as medical herbs for the treatment of infectious diseases is necessary. Extracts from different plant parts such as the leaves, flowers, fruit, and bark of Combretum albiflorum, Laurus nobilis , and Sonchus oleraceus were found to possess anti-quorum sensing (QS) activities. In this study, we evaluated the effect of C. nobile against Pseudomonas aeruginosa biofilm formationMETHODS:The P. aeruginosa samples were isolated from patients with different types of infection, including wound infection, septicemia, and urinary tract infection. The flowers of C. nobile were dried and the extract was removed using a rotary device and then dissolved in dimethyl sulfoxide at pH 7.4. The microdilution method was used to evaluate the minimum inhibitory concentration (MIC) of this extract on P. aeruginosa , and biofilm inhibition was assayed.RESULTS:Eighty percent of the isolated samples (16/20) could form a biofilm, and most of these were isolated from wound infections. The biofilm inhibitory concentration of the C. nobile extract was 6.25-25mg/ml, whereas the MIC was 12.5-50mg/ml.CONCLUSIONS:The anti-QS property of C. nobile may play an important role in its antibacterial activity, thus offering an additional strategy in the fight against bacterial infections. However, molecular investigation is required to explore the exact mechanisms of the antibacterial action and functions of this phytocompound.

Poly-N-acetyl glucosamine expression in Staphylococcus epidermidis biofilm cells affects the immune response and promotes tissue pathology in infected hosts

Staphylococcus epidermidis is a biofilm - forming bacterium and a leading etiological agent of nosocomial infections. The ability to establish biofilms on indwelling medical devices is a key virulence factor for this bacterium. Still, the influence of poly - N - acetyl glucosamine (PNAG), the major component of the extracellular biofilm matrix, in the host immune response has been scarcely studied. Here, t h is influence was assessed in mice challenged i.p. with PNAG - p roducing (WT) and isogenic - mutant lacking PNAG (M10) bacteria grown in biofilm - inducing conditions. Faster bacterial clearance was observed in the mice infected with WT bacteria than in M10 - infected counterparts , which w as accompanied by earlier neutrophil recruitment and higher IL - 6 production. Interestingly, in the WT - infected mice, but not in those infected with M10 , elevated serum IL - 10 was detected . To further study the effe ct of PNAG in the immune response, mice were primed with WT or M10 biofilm bacteria and subsequently infected with WT biofilm - released cells. WT - primed mice presented a higher frequency of splenic IFN - γ + and IL - 17 + CD4 + T cells, and more severe liver patho logy than M10 - primed counterparts. Nevertheless, T reg cells obtained from the WT - primed mice presented a higher suppressive function than those obtained from M10 - primed mice. This effect was abrogated when IL - 10 - deficient mice were similarly primed and infected indicating that PNAG promotes the differentiati on of highly suppressive T reg cells by a mechanism dependent on IL - 10. Altogether, these results provide evidence help ing explain ing the coexistence of inflammation and bacterial persistence often observed in biofilm - originated S. epidermidis infections

Evidence for inter- and intra-species biofilm formation variability among a small group of coagulase-negative staphylococci

Coagulase-negative staphylococci (CoNS) are common bacterial colonisers of the human skin. They are often involved in nosocomial infections due to biofilm formation in indwelling medical devices. While biofilm formation has been extensively studied in Staphylococcus epidermidis, little is known regarding other CoNS species. Here, biofilms from six different CoNS species were characterised in terms of biofilm composition and architecture. Interestingly, the ability to form a thick biofilm was not associated with any particular species, and high variability on biofilm accumulation was found within the same species. Cell viability assays also revealed different proportions of live and dead cells within biofilms formed by different species, although this parameter was particularly similar at the intra-species level. On the other hand, biofilm disruption assays demonstrated important inter- and intra-species differences regarding extracellular matrix composition. Lastly, confocal laser scanning microscopy (CLSM) experiments confirmed this variability, highlighting important differences and common features of CoNS biofilms. We hypothesised that the biofilm formation heterogeneity observed was rather associated with biofilm matrix composition than with cells themselves. Additionally, our results indicate that polysaccharides, DNA and proteins are fundamental pieces in the process of CoNS biofilm formation.

The influence of biofilm formation by Gardnerella vaginalis and other anaerobes on bacterial vaginosis

Bacterial vaginosis (BV) is the worldwide leading vaginal disorder in women of reproductive age. BV is characterized by the replacement of beneficial lactobacilli and the augmentation of anaerobic bacteria. Gardnerella vaginalis is a predominant bacterial species, however, BV is also associated with other numerous anaerobes, such as Atopobium vaginae, Mobiluncus mulieris, Prevotella bivia, Fusobacterium nucleatum and Peptoniphilus sp.. Currently, the role of G. vaginalis in the etiology of BV remains a matter of controversy. It is however known that, in BV patients, a biofilm is usually formed on the vaginal epithelium and G. vaginalis is typically the predominant species. So, the current paradigm is that the establishment of a biofilm plays a key role in the pathogenesis of BV. This review provides background on the influence of biofilm formation by G. vaginalis and other anaerobes in the polymicrobial etiology of BV, through its initial adhesion until biofilm formation and discusses the commensal and synergic interactions established between them to understand the phenotypic shift of G. vaginalis' biofilms into BV establishment.

Data quality in biofilm high-throughput routine analysis: intralaboratory protocol adaptation and experiment reproducibility

Biofilm research is growing more diverse and dependent on high-throughput technologies and the large-scale production of results aggravates data substantiation. In particular, it is often the case that experimental protocols are adapted to meet the needs of a particular laboratory and no statistical validation of the modified method is provided. This paper discusses the impact of intra-laboratory adaptation and non-rigorous documentation of experimental protocols on biofilm data interchange and validation. The case study is a non-standard, but widely used, workflow for Pseudomonas aeruginosa biofilm development, considering three analysis assays: the crystal violet (CV) assay for biomass quantification, the XTT assay for respiratory activity assessment, and the colony forming units (CFU) assay for determination of cell viability. The ruggedness of the protocol was assessed by introducing small changes in the biofilm growth conditions, which simulate minor protocol adaptations and non-rigorous protocol documentation. Results show that even minor variations in the biofilm growth conditions may affect the results considerably, and that the biofilm analysis assays lack repeatability. Intra-laboratory validation of non-standard protocols is found critical to ensure data quality and enable the comparison of results within and among laboratories.