Utilization of treated wood, steel, fibreglass, ferrocement and aluminium in the construction of modern fishing boats and their comparative cost analysis

Modern fishing boats have to be built not only on perfect lines but also with sound and strong construction materials that will ensure a long lasting trouble free service commensurate with the heavy capital investment involved. Choice of construction materials for fishing boats need careful scrutiny as they have to perform too well under most aggressive environments-sea-water and marine atmosphere. A number of alternative boat-building materials are now available whose comparative merits and demerits as well as comparative costs are brought out in this paper.

A wider choice of construction materials for the modern fishing boats

An account of fishing vessel construction materials is given, with information on essential features, and a material account. Materials discussed in detail are steel, wood, aluminium, glass reinforced plastic, and ferro-cement.

Microelements in Potato and Lily Samples Studied by Laser-Induced Breakdown spectroscopy Technology

A LIBS setup was built in the Institute of Modern Physics. In our experiments, LIBS spectra produced by infrared radiation of Nd : YAG nanosecond laser with 100 and 150 mJ pulse energy, respectively, were measured by fiber optic spectrometer in the ranges of 230-430 run and 430-1080 nm with a delay time of 1.7 and gate width of 2 ms for potato and lily samples prepared by vacuum freeze-dried technique. The lines from different metal elements such as K, Ca, Na, Mg, Fe, Al, Mn and Ti, and nonmetal elements such as C, N, O and H, and some molecular spectra from C-2, CaO, and CN were identified according to their wavelengths. The relative content of the six microelements, Ca, Na, K, Fe, Al, and Mg in the samples were analyzed according to their representative line intensities. By comparison we found that there are higher relative content of Ca and Na in lily samples and higher relative content of Mg in potato samples. The experimental results showed that LIBS technique is a fast and effective means for measuring and comparing the contents of microelements in plant samples.

Review of the technology and reliability issues arising as optical interconnects migrate onto the circuit board

Light has the greatest information carrying potential of all the perceivable interconnect mediums; consequently, optical fiber interconnects rapidly replaced copper in telecommunications networks, providing bandwidth capacity far in excess of its predecessors. As a result the modern telecommunications infrastructure has evolved into a global mesh of optical networks with VCSEL’s (Vertical Cavity Surface Emitting Lasers) dominating the short-link markets, predominately due to their low-cost. This cost benefit of VCSELs has allowed optical interconnects to again replace bandwidth limited copper as bottlenecks appear on VSR (Very Short Reach) interconnects between co-located equipment inside the CO (Central-Office). Spurred by the successful deployment in the VSR domain and in response to both intra-board backplane applications and inter-board requirements to extend the bandwidth between IC’s (Integrated Circuits), current research is migrating optical links toward board level USR (Ultra Short Reach) interconnects. Whilst reconfigurable Free Space Optical Interconnect (FSOI) are an option, they are complicated by precise line-of-sight alignment conditions hence benefits exist in developing guided wave technologies, which have been classified into three generations. First and second generation technologies are based upon optical fibers and are both capable of providing a suitable platform for intra-board applications. However, to allow component assembly, an integral requirement for inter-board applications, 3rd generation Opto-Electrical Circuit Boards (OECB’s) containing embedded waveguides are desirable. Currently, the greatest challenge preventing the deployment of OECB’s is achieving the out-of-plane coupling to SMT devices. With the most suitable low-cost platform being to integrate the optics into the OECB manufacturing process, several research avenues are being explored although none to date have demonstrated sufficient coupling performance. Once in place, the OECB assemblies will generate new reliability issues such as assembly configurations, manufacturing tolerances, and hermetic requirements that will also require development before total off-chip photonic interconnection can truly be achieved

Unraveling EU Policies: the ““Common Basic Principles”” and the ““European Integration Fund”” as a technology of government

this paper is about EU “soft policies” on immigrant integration. It analyzes the “Common Basic Principles” (CBPs) and the “European Integration Fund” (EIF), two devices that have been recently established within this framework. It adopts the theoretical perspective of the “anthropology of policy” and “governmentality studies”. It shows the context of birth of the aforementioned devices, as well as their functioning and the assessment done by the actors implied in the elaboration/implementation/evaluation of the related policies. It is based both on documentary research as well as direct observation and interviews done to the actors implied. It concludes that the PBC and the EIF should be considered as a “technology of government”, that strives to align the conduct of the actors with the governmental aims, as well as it produces specific practices and knowledge. It also underlines an intrinsic feature of many policies: their “congenital failure”, since they are (often) disputed and resignified by situated actors, who are embedded in asymmetrical power relations.

Neural network forecasts of input-output technology

A significant part of the literature on input-output (IO) analysis is dedicated to the development and application of methodologies forecasting and updating technology coefficients and multipliers. Prominent among such techniques is the RAS method, while more information demanding econometric methods, as well as other less promising ones, have been proposed. However, there has been little interest expressed in the use of more modern and often more innovative methods, such as neural networks in IO analysis in general. This study constructs, proposes and applies a Backpropagation Neural Network (BPN) with the purpose of forecasting IO technology coefficients and subsequently multipliers. The RAS method is also applied on the same set of UK IO tables, and the discussion of results of both methods is accompanied by a comparative analysis. The results show that the BPN offers a valid alternative way of IO technology forecasting and many forecasts were more accurate using this method. Overall, however, the RAS method outperformed the BPN but the difference is rather small to be systematic and there are further ways to improve the performance of the BPN.

Infra-Éireann: Making Ireland Modern - Irish Pavilion for the 14th Architectural biennale, Venice 2014.

After an open competition, we were selected to commission, curate and design the Irish pavilion for the Venice biennale 2014. Our proposal engage with the role of infrastructure and architecture in the cultural development of the new Irish state 1914-2014. This curatorial programme was realised in a demountable, open matrix pavilion measuring 12 x 5 x 6 metres.

How modernity is absorbed into national cultures usually presupposes an attachment to previous conditions and a desire to reconcile the two. In an Irish context, due to the processes of de-colonisation and political independence, this relationship is more complicated.

In 1914, Ireland was largely agricultural and lacked any significant industrial complex. The construction of new infrastructures after independence in 1921 became central to the cultural imagining of the new nation. The adoption of modernist architecture was perceived as a way to escape the colonial past. As the desire to reconcile cultural and technological aims developed, these infrastructures became both the physical manifestation and concrete identity of the new nation with architecture an essential element in this construct.

Technology and infrastructure are inherently cosmopolitan. Beginning with the Shannon hydro-electric facility at Ardnacrusha (1929) involving the German firm of Siemens-Schuckert, Ireland became a point of various intersections between imported international expertise and local need. By the turn of the last century, it had become one of the most globalised countries in the world, site of the European headquarters of multinationals such as Google and Microsoft. Climatically and economically expedient to the storing and harvesting of data, Ireland has subsequently become an important repository of digital information farmed in large, single-storey sheds absorbed into dispersed suburbs. In 2013, it became the preferred site for Intel to design and develop its new microprocessor board, the Galileo, a building block for the internet of things.

The story of the decades in between, of shifts made manifest in architecture and infrastructure, from the policies of economic protectionism to the embracing of the EU is one of the influx of technologies and cultural references into a small country on the edges of Europe: Ireland as both a launch-pad and testing ground for a series of aspects of designed modernity.

Making Ireland Modern

Making Ireland Modern is a cross-disciplinary, inter-institutional, inter-media design and research project which emerged from an open competition (won by Boyd and McLaughlin) to commission/curate the Irish pavilion for the Venice biennale 2014. It explores the relationship between architecture, infrastructure and technology in the building of a new nation. Constructed as a demountable, open matrix of drawings, photographs, models and other artefacts, the exhibition (12 x 5 x 6 metres) presents ten infrastructural episodes – Negation, Electricity, Health, Transportation, Television, Aviation, Education, Telecommunications, Motorways, Data – spanning a period of one hundred years from 1916-2016. Exploring a range of scales from the detail design of objects to entire landscapes and other territories, Making Ireland Modern describes architecture’s role in transforming the physical and cultural identity of the new state through its intersession in the everyday lives of its population. In 2015, we were commissioned by the Arts Council of Ireland to expand and develop the pavilion for a three cities tour of Ireland as one of the five major strands of the Arts Council’s Art2016 programme of Irish State’s 1916-2016 centennial celebrations (2016).

Law, technology and water conflicts in developing societies: a case study of tank systems in Tamil Nadu

The study examines the relationship between law, technology and water conflicts from colonial days to the present in traditional (water) tank systems in the south Indian state of Tamil Nadu. Tanks are man-made water systems developed for irrigation and many other purposes in semi-arid areas. The thesis adopts a historical approach to study the development of law, particularly property rights, and takes an empirical approach to investigate the tank conflicts. Archival documents on irrigation development, Case laws, Focus Group Discussions, Open ended Interviews and Field visits to selected tank chains are used as source material for the discussion. Case studies of conflicts are described and analyzed at three levels - Vaigai river basin for a macro level, Kothai Anicut system in Cauvery basin for a meso level, and twenty other interconnected tanks for a micro-level. The thesis deviates from the conventional understanding that tanks as traditional systems as simple and local technologies but considers them to be complex. It argues that the use of commonly held systems such as tanks within the colonial and post colonial laws as state ownership has been the source of many conflicts. In particular, it finds most tank conflicts are a product of progressive and absolute state control over water and the systems established using colonial land revenue administrative law. The law continues to treat tanks as pieces of landed property held by state and the individuals rather than as technology systems that presupposed the regime of property rights introduced after the colonial times. The modern interventions in water including the reservoir building, and altering the hydraulics of rivers and streams aggravate tank conflicts and lead to their further detriment. The study brings the focus to ground realities, and offers new perspectives on understanding tank systems in dynamic ways.

Unlocking the technology-mediated learning process : insights and articulating actions for an institutional approach

This paper is part of the results from the project "Implementation Strategies and Development of an Open and Distance Education System for the University of the Azores" funded by the European Social Fund. http://hdl.handle.net/10400.3/2327

Power Law Behavior and Self-similarity in Modern Industrial Accidents

Advances in technology have produced more and more intricate industrial systems, such as nuclear power plants, chemical centers and petroleum platforms. Such complex plants exhibit multiple interactions among smaller units and human operators, rising potentially disastrous failure, which can propagate across subsystem boundaries. This paper analyzes industrial accident data-series in the perspective of statistical physics and dynamical systems. Global data is collected from the Emergency Events Database (EM-DAT) during the time period from year 1903 up to 2012. The statistical distributions of the number of fatalities caused by industrial accidents reveal Power Law (PL) behavior. We analyze the evolution of the PL parameters over time and observe a remarkable increment in the PL exponent during the last years. PL behavior allows prediction by extrapolation over a wide range of scales. In a complementary line of thought, we compare the data using appropriate indices and use different visualization techniques to correlate and to extract relationships among industrial accident events. This study contributes to better understand the complexity of modern industrial accidents and their ruling principles.