Reduction of postmortem angiography-induced tissue edema by using polyethylene glycol as a contrast agent dissolver

Postmortem investigation is increasingly supported by computed tomography (CT) and magnetic resonance imaging, in which postmortem minimal invasive angiography has become important. The newly introduced approach using an aqueous contrast agent solution provided excellent vessel visualization but was suspected to possibly cause tissue edema artifacts in histological investigations. The aim of this study was to investigate on a porcine heart model whether it is possible to influence the contrast agent distribution within the soft tissue by changing its viscosity by dissolving the contrast agent in polyethylene glycol (PEG) as a matrix medium. High-resolution CT scans after injection showed that viscosities above c. 15 mPa s (65% PEG) prevented a contrast agent distribution within the capillary bed of the left ventricular myocardium. Thereby, the precondition of edema artifacts could be reduced. Its minimal invasive application on human corpses needs to be further adapted as the flow resistance is expected to differ between different tissues.

Endocardial versus epicardial ventricular radiofrequency ablation: utility of in vivo contact force assessment.

BACKGROUND Contact force (CF) is an important determinant of lesion formation for atrial endocardial radiofrequency ablation. There are minimal published data on CF and ventricular lesion formation. We studied the impact of CF on lesion formation using an ovine model both endocardially and epicardially. METHODS AND RESULTS Twenty sheep received 160 epicardial and 160 endocardial ventricular radiofrequency applications using either a 3.5-mm irrigated-tip catheter (Thermocool, Biosense-Webster, n=160) or a 3.5 irrigated-tip catheter with CF assessment (Tacticath, Endosense, n=160), via percutaneous access. Power was delivered at 30 watts for 60 seconds, when either catheter/tissue contact was felt to be good or when CF>10 g with Tacticath. After completion of all lesions, acute dimensions were taken at pathology. Identifiable lesion formation from radiofrequency application was improved with the aid of CF information, from 78% to 98% on the endocardium (P<0.001) and from 90% to 100% on the epicardium (P=0.02). The mean total force was greater on the endocardium (39±18 g versus 21±14 g for the epicardium; P<0.001) mainly because of axial force. Despite the force-time integral being greater endocardially, epicardial lesions were larger (231±182 mm(3) versus 209±131 mm(3); P=0.02) probably because of the absence of the heat sink effect of the circulating blood and covered a greater area (41±27 mm(2) versus 29±17 mm(2); P=0.03) because of catheter orientation. CONCLUSIONS In the absence of CF feedback, 22% of endocardial radiofrequency applications that are thought to have good contact did not result in lesion formation. Epicardial ablation is associated with larger lesions.

Manifestation of depression symptoms among Mexican American adolescents

Background. Previous findings reported more depression among Mexican American adolescents than among adolescents from other groups. There has been minimal research published on distribution of depression symptoms among Mexican American adolescents and practically no data has been published from community samples. ^ Objective. To examine the phenomenology of DSM-IV major depression symptoms across groups defined by ethnic status, by gender and language use focusing on the Mexican American group. ^ Methods. Secondary data from 2624 adolescents (ages 10-17) among three ethnic subgroups, Mexican (26.7%), African (45%) and Anglo Americans (28.3%), was analyzed. Data come from the Teen Life Changes (TLC) Survey conducted in 1994 by Roberts et al. (1997). A self-report questionnaire, which includes the DSD scale to measure depression, was used. ^ Results. Analysis of data showed significant differences among youth in the phenomenology of depression symptoms by ethnicity, by gender and by language use at home. ^ Conclusion. This study adds knowledge to the psychopathology and mental health literature from the identification of depression symptoms profile as well as permits the design of more appropriate policy for prevention and intervention programs among culturally diverse youth. ^

Electrical resistivity, formation factors, and sound velocity at DSDP Holes 75-530A and 75-530B

From 0 to 277 m at Site 530 are found Holocene to Miocene diatom ooze, nannofossil ooze, marl, clay, and debrisflow deposits; from 277 to 467 m are Miocene to Oligocene mud; from 467 to 1103 m are Eocene to late Albian Cenomanian interbedded mudstone, marlstone, chalk, clastic limestone, sandstone, and black shale in the lower portion; from 1103 to 1121 m are basalts. In the interval from 0 to 467 m, in Holocene to Oligocene pelagic oozes, marl, clay, debris flows, and mud, velocities are 1.5 to 1.8 km/s; below 200 m velocities increase irregularly with increasing depth. From 0 to 100 m, in Holocene to Pleistocene diatom and nannofossil oozes (excluding debris flows), velocities are approximately equivalent to that of the interstitial seawater, and thus acoustic reflections in the upper 100 m are primarily caused by variations in density and porosity. Below 100 or 200 m, acoustic reflections are caused by variations in both velocity and density. From 100 to 467 m, in Miocene-Oligocene nannofossil ooze, clay, marl, debris flows, and mud, acoustic anisotropy irregularly increases to 10%, with 2 to 5% being typical. From 467 to 1103 m in Paleocene to late Albian Cenomanian interbedded mudstone, marlstone, chalk, clastic limestone, and black shale in the lower portion of the hole, velocities range from 1.6 to 5.48 km/s, and acoustic anisotropies are as great as 47% (1.0 km/s) faster horizontally. Mudstone and uncemented sandstone have anisotropies which irregularly increase with increasing depth from 5 to 10% (0.2 km/s). Calcareous mudstones have the greatest anisotropies, typically 35% (0.6 km/s). Below 1103 m, basalt velocities ranged from 4.68 to 4.98 km/s. A typical value is about 4.8 km/s. In situ velocities are calculated from velocity data obtained in the laboratory. These are corrected for in situ temperature, hydrostatic pressure, and porosity rebound (expansion when the overburden pressure is released). These corrections do not include rigidity variations caused by overburden pressures. These corrections affect semiconsolidated sedimentary rocks the most (up to 0.25 km/s faster). These laboratory velocities appear to be greater than the velocities from the sonic log. Reflection coefficients derived from the laboratory data, in general, agree with the major features on the seismic profiles. These indicate more potential reflectors than indicated from the reflection coefficients derived using the Gearhart-Owen Sonic Log from 625 to 940 m, because the Sonic Log data average thin beds. Porosity-density data versus depth for mud, mudstone, and pelagic oozes agree with data for similar sediments as summarized in Hamilton (1976). At depths of about 400 m and about 850 m are zones of relatively higher porosity mudstones, which may suggest anomalously high pore pressure; however, they are more probably caused by variations in grain-size distribution and lithology. Electrical resistivity (horizontal) from 625 to 950 m ranged from about 1.0 to 4.0 ohm-m, in Maestrichtian to Santonian- Coniacian mudstone, marlstone, chalk, clastic limestone, and sandstone. An interstitial-water resistivity curve did not indicate any unexpected lithology or unusual fluid or gas in the pores of the rock. These logs were above the black shale beds. From 0 to 100 m at Sites 530 and 532, the vane shear strength on undisturbed samples of Holocene-Pleistocene diatom and nannofossil ooze uniformly increases from about 80 g/cm**2 to about 800 g/cm**2. From 100 to 300 m, vane shear strength of Pleistocene-Miocene nannofossil ooze, clay, and marl are irregular versus depth with a range of 500 to 2300 g/cm**2; and at Site 532 the vane shear strength appears to decrease irregularly and slightly with increasing depth (gassy zone). Vane shear strength values of gassy samples may not be valid, for the samples may be disturbed as gas evolves, and the sediments may not be gassy at in situ depths.

Using ecological niche models to support tree species selection for forest restoration planning in largely deforested regions

Species selection for forest restoration is often supported by expert knowledge on local distribution patterns of native tree species. This approach is not applicable to largely deforested regions unless enough data on pre-human tree species distribution is available. In such regions, ecological niche models may provide essential information to support species selection in the framework of forest restoration planning. In this study we used ecological niche models to predict habitat suitability for native tree species in "Tierra de Campos" region, an almost totally deforested area of the Duero Basin (Spain). Previously available models provide habitat suitability predictions for dominant native tree species, but including non-dominant tree species in the forest restoration planning may be desirable to promote biodiversity, specially in largely deforested areas were near seed sources are not expected. We used the Forest Map of Spain as species occurrence data source to maximize the number of modeled tree species. Penalized logistic regression was used to train models using climate and lithological predictors. Using model predictions a set of tools were developed to support species selection in forest restoration planning. Model predictions were used to build ordered lists of suitable species for each cell of the study area. The suitable species lists were summarized drawing maps that showed the two most suitable species for each cell. Additionally, potential distribution maps of the suitable species for the study area were drawn. For a scenario with two dominant species, the models predicted a mixed forest (Quercus ilex and a coniferous tree species) for almost one half of the study area. According to the models, 22 non-dominant native tree species are suitable for the study area, with up to six suitable species per cell. The model predictions pointed to Crataegus monogyna, Juniperus communis, J.oxycedrus and J.phoenicea as the most suitable non-dominant native tree species in the study area. Our results encourage further use of ecological niche models for forest restoration planning in largely deforested regions.

How vague can your patent be? Vagueness strategies in U.S. patents

Patent claims defi ne the protection scope of the intellectual property sought by the patent applicant or patentee. Broad claims are valuable as they can describe more expansive rights to the invention. Therefore, if these claims are too broad a potential infringer will more easily argue against them. But if the claims are too narrow the scope of protection of the intellectual property is greatly reduced. Patent claims have to be, on the one hand, determinate and precise enough and, on the other hand, as inclusive as possible. Therefore patent applicants must fi nd a balance in the broadness of the scope defi ned by their claims. This balance can be achieved by the choice of words with a convenient degree of semantic indeterminacy, by the choice of modifi ers or other strategies. In fact, vagueness in patent claims is a desirable characteristic for such documents. A quantitative and qualitative analysis of a corpus of 350 U.S. patents provides a promising starting point to understand the linguistic instruments used to achieve the balance between property claim scope and precision of property description. To conclude, some issues relating vagueness and pragmatics are suggested as a line of further research.

Análisis de la durabilidad de la cubierta plana invertida, a través del estudio de las interacciones e incompatibilidades entre las membranas sintéticas y el poliestireno extrusionado

La cubierta plana invertida se forma, cuando sobre una membrana impermeable se coloca un aislamiento térmico. Estos materiales pueden separarse con capas auxiliares que impiden el contacto directo entre ellos. Muchos de los materiales que forman esta solución constructiva pueden ser polímeros, como lo son algunas membranas impermeables, las capas auxiliares separadoras o el poliestireno extrusionado (XPS). La mayoría de los polímeros son incompatibles entre sí, por lo que en esta tesis se plantea como hipótesis la posibilidad de que se produzcan interacciones e incompatibilidades entre algunos de estos materiales. Por ello se hace una búsqueda bibliográfica y documental de otras investigaciones que pudieran estar relacionadas con el tema, y se estudian y analizan normas y documentación facilitada por fabricantes. Sin embargo, tras consultar toda la bibliografía y documentación que se referencia en esta tesis doctoral, no fue encontrado ningún trabajo de investigación sobre la influencia de la interacción entre los materiales que componen las cubiertas planas invertidas, y de cómo afecta esta a la durabilidad de las mismas. El propósito de esta tesis es el análisis de la durabilidad de la cubierta plana invertida, desde el punto de vista de las interacciones e incompatibilidades que pueden producirse entre los materiales formantes de esta solución constructiva. Además de este objetivo general, se estudian alternativas que puedan prolongar el ciclo de vida de la cubierta plana invertida. Para ello, se desarrolla un plan experimental con el fin de analizar dichas incompatibilidades, y estudiar los factores que las condicionan. Algunos de los resultados obtenidos, muestran que determinadas láminas impermeables utilizadas normalmente para la construcción de cubiertas planas, pueden interactuar con el XPS y sufrir deterioro. El contacto con el mismo, la incorrecta separación, la presión y el calor, son factores determinantes para que se produzca deterioro. Se puede señalar como una de las conclusiones de esta investigación, que la protección térmica que proporciona el XPS a la cubierta plana invertida, puede no ser suficiente (dependiendo del espesor del mismo, y de la ubicación de la cubierta fundamentalmente), para reducir la cantidad de calor que alcanza la línea de contacto entre los materiales, y por tanto paliar las interacciones que se producen. Además, aunque los geotextiles utilizados como capas auxiliares separadoras, en los gramajes por metro cuadrado, recomendados por algunas de las normas reguladoras de este tipo de cubiertas minoran las interacciones, estas siguen produciéndose. ABSTRACT The inverted flat roof is formed from a waterproofing membrane on which the thermal insulation is placed. These materials may be separated with auxiliary layers, which prevent the direct contact between them. Many of the materials forming this constructive solution can be polymers, such as some waterproofing membranes, the auxiliary separating layers, or the extruded polystyrene board (XPS). Most polymers are incompatible, so this thesis hypothesized that interactions and incompatibilities between some of these materials might be possible. Therefore, a literature search, and other documentation that could be related to the topic, are studied and analyzed, as well as, standards and documentation provided by manufacturers. However, after consulting all literature and documents referenced in this dissertation, it was not found any research about the influence of interaction between the materials forming the inverted flat roof, and how this affects to the durability of them. The purpose of this thesis is the analysis of the durability of the inverted flat roof, from the point of view of interactions and incompatibilities may occur between the materials setting up this constructive solution. Along with this general objective, alternatives that can prolong the life cycle of the inverted roof are studied. To get this, an experimental plan is developed, in order to analyze these incompatibilities, and study the factors conditioning them. Some of the results show, that certain normally used waterproofing laminas for building flat roofs, may interact with XPS producing lamina deterioration. Contact, incorrect separation, pressure and heat, are determinant factors for degradation. It can be pointed out, as one of the conclusions of this research, that the thermal protection provided by XPS to the inverted flat roof, cannot be enough (depending on the XPS thickness, and the location of the flat mainly) to reduce the amount of heat that reaches the contact line between materials, and thus to cut down interactions. Furthermore, although geotextiles used as auxiliary separating layers, within the weights per square meter recommended by some of the regulating rules of this type of roofs reduce interactions, these still occur.

The transcriptional corepressor MITR is a signal-responsive inhibitor of myogenesis

Activation of muscle-specific genes by members of the myocyte enhancer factor 2 (MEF2) and MyoD families of transcription factors is coupled to histone acetylation and is inhibited by class II histone deacetylases (HDACs) 4 and 5, which interact with MEF2. The ability of HDAC4 and -5 to inhibit MEF2 is blocked by phosphorylation of these HDACs at two conserved serine residues, which creates docking sites for the intracellular chaperone protein 14-3-3. When bound to 14-3-3, HDACs are released from MEF2 and transported to the cytoplasm, thereby allowing MEF2 to stimulate muscle-specific gene expression. MEF2-interacting transcription repressor (MITR) shares homology with the amino-terminal regions of HDAC4 and -5, but lacks an HDAC catalytic domain. Despite the absence of intrinsic HDAC activity, MITR acts as a potent inhibitor of MEF2-dependent transcription. Paradoxically, however, MITR has minimal inhibitory effects on the skeletal muscle differentiation program. We show that a substitution mutant of MITR containing alanine in place of two serine residues, Ser-218 and Ser-448, acts as a potent repressor of myogenesis. Our findings indicate that promyogenic signals antagonize the inhibitory action of MITR by targeting these serines for phosphorylation. Phosphorylation of Ser-218 and Ser-448 stimulates binding of 14-3-3 to MITR, disrupts MEF2:MITR interactions, and alters the nuclear distribution of MITR. These results reveal a role for MITR as a signal-dependent regulator of muscle differentiation.

Binding studies of cationic thymidyl deoxyribonucleic guanidine to RNA homopolynucleotides.

Deoxyribonucleic guanidine is a potential antisense agent that is generated via the replacement of the negative phosphodiester linkages of DNA [--O--(PO2-)--O--] with positively-charged guanidinium (g) linkages [--NH--C(==NH2+)--NH--]. A pentameric thymidyl deoxyribonucleic guanidine molecule [d(Tg)4T-azido] has been shown to base pair specifically to poly(rA) with an unprecedented affinity. Both double and triple strands consisting of one and two equivalents of d(Tg)4T-azido paired with one equivalent of poly(rA) are indicated by thermal denaturation experiments. At an ionic strength of 0.22, the five bases of d(Tg)4T-azido are estimated to dissociate from a double helix with poly(rA) at > 100 degrees C! The effect of ionic strength on thermal denaturation is very pronounced, with stability greatest at low ionic strengths. The method of continuous variation indicates that there is an equilibrium complex with a molar ratio of d(Tg) to r(Ap) or d(Ap) of 2:1. Based on this evidence, models of the structures of d(Tg)9T-azido bound to r(Ap)9A are proposed.

Synthesis of a thymidyl pentamer of deoxyribonucleic guanidine and binding studies with DNA homopolynucleotides.

Replacement of the phosphodiester linkages of the polyanion DNA with guanidine linkers provides the polycation deoxynucleic guanidine (DNG). The synthesis of pentameric thymidyl DNA is provided. This polycationic DNG species binds with unprecedented affinity and with base-pair specificity to negatively charged poly(dA) to provide both double and triple helices. The dramatic stability of these hybrid structures is shown by their denaturation temperatures (Tm). For example, the double helix of the pentameric thymidyl DNG and poly(dA) does not dissociate in boiling water (ionic strength = 0.12), whereas the Tm for pentameric thymidyl DNA associated with poly(dA) is approximately 13 degrees C (ionic strength = 0.12). The effect of ionic strength on Tm for DNG complexes with DNA shows an opposite correlation compared with double-stranded DNA and is much more dramatic than for double-stranded DNA.

Telemedicine - the way ahead for medicine in the developing world

An e-mail link with the facility to send high-resolution digital images is a cheap and uncomplicated telemedicine method. The Swinfen Charitable Trust helped establish such a link in Patan Hospital Kathmandu, Nepal in March 2000. Over 12 months using this link 42 telemedicine referrals were sent to specialists throughout the world. Referrals were: 36% respiratory medicine; 21% neurology, 21% dermatology; 14% cardiology; 5% nephrology; and 3% radiology - 28 had digital pictures attached, of which 96% were of high enough quality on which specialists were able to comment. Thirty-nine replies were received. The average time for a specialist reply was 2 days, and 45% were answered within 24 hours. All replies were judged by independent assessors to be helpful or very helpful for diagnosis, management and education. The assessors decided that in 50% of cases the advice if acted upon would have shortened hospital stay. This pilot study has shown that a low-cost telemedicine link is technically feasible and can be of significant benefit for diagnosis, management and education in a developing world setting.

Prismatic dentine in the Australian lungfish, Neoceratodus forsteri (Osteichthyes : Dipnoi)

The Australian lungfish, Neoceratodus forsteri, has a dentition consisting of enamel, mantle dentine and bone, enclosing circumdenteonal, core and interdenteonal dentines. Branching processes from cells that produce interdenteonal dentine leave the cell surface at different angles, with collagen fibrils aligned parallel to the long axis of each process. In the interdenteonal dentine, crystals of calcium hydroxyapatite, form within fibrils of collagen, and grow within a matrix of non-collagenous protein. Crystals are aligned parallel to the cell process, as are the original collagen fibrils. Because the processes are angled to the cell surface, the crystals within the core or interdenteonal dentine are arranged in bundles set at angles to each other. Apatite crystals in circumdenteonal dentine are finer and denser than those of the interdenteonal dentine, and form outside the fibrils of collagen. In mature circumdenteonal dentine the crystals of circumdenteonal dentine form a dense tangled mass, linked to interdenteonal dentine by isolated crystals. The functional lungfish tooth plate contains prisms of large apatite crystals in the interdenteonal dentine and masses of fine tangled crystals around each denteon. This confers mechanical strength on a structure with little enamel that is subjected to heavy wear. (c) 2006 Elsevier Ltd. All rights reserved.

Mechanical properties of interfacial films formed by lysozyme self-assembly at the air-water interface

We present the first characterization of the mechanical properties of lysozyme films formed by self-assembly at the air-water interface using the Cambridge interfacial tensiometer (CIT), an apparatus capable of subjecting protein films to a much higher level of extensional strain than traditional dilatational techniques. CIT analysis, which is insensitive to surface pressure, provides a direct measure of the extensional stress-strain behavior of an interfacial film without the need to assume a mechanical model (e.g., viscoelastic), and without requiring difficult-to-test assumptions regarding low-strain material linearity. This testing method has revealed that the bulk solution pH from which assembly of an interfacial lysozyme film occurs influences the mechanical properties of the film more significantly than is suggested by the observed differences in elastic moduli or surface pressure. We have also identified a previously undescribed pH dependency in the effect of solution ionic strength on the mechanical strength of the lysozyme films formed at the air-water interface. Increasing solution ionic strength was found to increase lysozyme film strength when assembly occurred at pH 7, but it caused a decrease in film strength at pH 11, close to the pI of lysozyme. This result is discussed in terms of the significant contribution made to protein film strength by both electrostatic interactions and the hydrophobic effect. Washout experiments to remove protein from the bulk phase have shown that a small percentage of the interfacially adsorbed lysozyme molecules are reversibly adsorbed. Finally, the washout tests have probed the role played by additional adsorption to the fresh interface formed by the application of a large strain to the lysozyme film and have suggested the movement of reversibly bound lysozyme molecules from a subinterfacial layer to the interface.

Educating future IS professionals through real-world integration

We report on teaching Information Systems Analysis (ISA) in a way that takes the classroom into the real world to enrich students' understanding of the broader role of being an IS professional. Through exposure to less controllable and more uncomfortable issues (e.g., client deadlines; unclear scope; client expectations; unhelpful colleagues, complexity about what is the problem never mind the solution) we aim to better prepare students to respond to the complex issues surrounding deployment of systems analysis methodologies in the real world. In this paper we provide enough detail on what these classes involve to allow a reader to replicate appealing elements in their own teaching. This paper is a reflection on integrating in the real world when teaching ISA – a reflection from the standpoint of students who face an unstructured and complex world and of lecturers who aim to prepare students to hit the floor running when they encounter that world.