Effects of Microstructural Heterogeneity on The Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Weighting social preferences in participatory multi-criteria evaluations: a case study on sustainable natural resource management

28 p.

Effect of Microstructural Interfaces on the Mechanical Response of Crystalline Metallic Materials

Advances in nano-scale mechanical testing have brought about progress in the understanding of physical phenomena in materials and a measure of control in the fabrication of novel materials. In contrast to bulk materials that display size-invariant mechanical properties, sub-micron metallic samples show a critical dependence on sample size. The strength of nano-scale single crystalline metals is well-described by a power-law function, σαD^-n, where D is a critical sample size and n is a experimentally-fit positive exponent. This relationship is attributed to source-driven plasticity and demonstrates a strengthening as the decreasing sample size begins to limit the size and number of dislocation sources. A full understanding of this size-dependence is complicated by the presence of microstructural features such as interfaces that can compete with the dominant dislocation-based deformation mechanisms. In this thesis, the effects of microstructural features such as grain boundaries and anisotropic crystallinity on nano-scale metals are investigated through uniaxial compression testing. We find that nano-sized Cu covered by a hard coating displays a Bauschinger effect and the emergence of this behavior can be explained through a simple dislocation-based analytic model. Al nano-pillars containing a single vertically-oriented coincident site lattice grain boundary are found to show similar deformation to single-crystalline nano-pillars with slip traces passing through the grain boundary. With increasing tilt angle of the grain boundary from the pillar axis, we observe a transition from dislocation-dominated deformation to grain boundary sliding. Crystallites are observed to shear along the grain boundary and molecular dynamics simulations reveal a mechanism of atomic migration that accommodates boundary sliding. We conclude with an analysis of the effects of inherent crystal anisotropy and alloying on the mechanical behavior of the Mg alloy, AZ31. Through comparison to pure Mg, we show that the size effect dominates the strength of samples below 10 μm, that differences in the size effect between hexagonal slip systems is due to the inherent crystal anisotropy, suggesting that the fundamental mechanism of the size effect in these slip systems is the same.

Skimmer Trawl Fishery Catch Evaluations in Coastal Louisiana, 2004 and 2005

Fishery observers collected data from 307 tows during 96 trips aboard skimmer trawl vessels in Louisiana’s coastal waters from September 2004 through June 2005 to estimate catch rates of target and nontarget species, including sea turtles (Cheloniidae and Dermochelyidae), by area and season during commercial shrimping operations. About 16,965.7 kg of total catch were recorded during 517.0 hours of fishing operations. Based on weight extrapolations from species composition samples, penaeid shrimp (Penaeidae) dominated the catch at 66%, followed by finfish at 19%, nonpenaeid shrimp crustaceans at 7%, discarded penaeid shrimp at 6%, and debris at 3%. Noncrustacean invertebrates comprised less than 1%. Catch rates in kilograms per hour by category was 21.6 for penaeid shrimp, 6.2 for finfish, 2.2 for nonpenaeid crustaceans, 1.8 for discarded penaeid shrimp, and 0.9 for debris. White shrimp, Litopenaeus setiferus, other penaeid shrimp, and Gulf menhaden, Brevoortia patronus, were the top three dominant species by weight. Seasonally, a higher catch rate was observed from May through August 2005 for penaeid shrimp as compared with the September through December 2004 period. Conversely, the September through December 2004 period experienced a higher catch rate for finfish than during May through August 2005. No sea turtle interactions were documented.