Hole-type gaseous detectors for medical imaging and HEP experiments

This work presents the results on the development of a high pressure Xe gaseous detector envisaging medical imaging. The detector uses two VUV photosensors operating face-to-face, based on the CsI-MHSP with position discrimination capability. The known effect of the charge gain decrease with the gas pressure is compensated with a light gain using the electroluminescence process. Studies of signal amplitude, energy and position resolution are presented. On the second part, gaseous detectors based on THGEM where studied in order to fulfill the requirements of present and future high energy physics experiments. The work is focused on the application of THGEM in RICH detectors elements: a triple THGEM detector using CsI photocathodes in Ne mixtures was suggested. The ion backflow to the photocathode remains a concern and a limitation; to minimize it, the application of a new hole-structure, THCOBRA, was suggested. Preliminary results foresee good perspectives for the successful application of THCOBRA in ion back-flow suppression. This work contains several methods and measurements of the CsI photocathodes behaviour in radiation gaseous detectors. A long discussion on its issues and possible solutions are presented.

Valorization of solid wastes from cellulose and paper industry

This thesis reports in detail studies of industrial solid wastes valorization as alternative raw materials. All tested wastes are classified as non-hazardous and are generated in the pulp and paper process, including primary sludge, dregs, grits, lime mud and bottom ash (this generated in a process that occurs in parallel to the production of cellulose, whose aim is the production of energy to supply the plant through the combustion of forest biomass in fluidized bed). A detailed general characterization was performed at each waste and according to their characteristics, they were selected some applications in materials with potential use, specifically in Fibercement, Bituminous Mixture for regularization layer and industrial mortars (rendering mortars and cementitious-adhesive). After decided to application each waste was specifically tested to proceed the setting up of formulations containing different content of waste in replacement of the raw conventional material. As an isolated case, the bottom ash was tested not only as an alternative raw material for construction materials, but also it was tested for its use in fluidized bed in which the waste is generated as raw material. Both dregs and bottom ash had undergone special treatment to make possible to obtain a better quality of waste in order do not compromise the final product characteristics and process. The dregs were tested in bituminous mixtures as received and also washed (on the laboratory scale to remove soluble salts) and bottom ash were washed and screened in industrial scale (for removal of soluble salts, especially chlorides and coarse fraction particles elimination - particles larger than 1 mm size). The remaining residues form used in such as received avoiding additional costs. The results indicated potential and some limitations for each application to the use of these wastes as alternative raw material, but in some cases, the benefits in relation to valorization overlap with its limitations in both aspects, environmental and economic.

Image, video and 3D data registration: medical, satellite and video processing applications with quality metrics

Data registration refers to a series of techniques for matching or bringing similar objects or datasets together into alignment. These techniques enjoy widespread use in a diverse variety of applications, such as video coding, tracking, object and face detection and recognition, surveillance and satellite imaging, medical image analysis and structure from motion. Registration methods are as numerous as their manifold uses, from pixel level and block or feature based methods to Fourier domain methods. This book is focused on providing algorithms and image and video techniques for registration and quality performance metrics. The authors provide various assessment metrics for measuring registration quality alongside analyses of registration techniques, introducing and explaining both familiar and state–of–the–art registration methodologies used in a variety of targeted applications.

Improved polymeric medical devices for active substances delivery

The work presented in this thesis was developed in collaboration with a Portuguese company, BeyonDevices, devoted to pharmaceutical packaging, medical technology and device industry. Specifically, the composition impact and surface modification of two polymeric medical devices from the company were studied: inhalers and vaginal applicators. The polyethylene-based vaginal applicator was modified using supercritical fluid technology to acquire self-cleaning properties and prevent the transport of bacteria and yeasts to vaginal flora. For that, in-situ polymerization of 2-substituted oxazolines was performed within the polyethylene matrix using supercritical carbon dioxide. The cationic ring-opening polymerization process was followed by end-capping with N,N-dimethyldodecylamine. Furthermore, for the same propose, the polyethylene matrix was impregnated with lavender oil in supercritical medium. The obtained materials were characterized physical and morphologically and the antimicrobial activity against bacteria and yeasts was accessed. Materials modified using 2-substituted oxazolines showed an effective killing ability for all the tested microorganisms, while the materials modified with lavender oil did not show antimicrobial activity. Only materials modified with oligo(2-ethyl-2-oxazoline) maintain the activity during the long term stability. Furthermore, the cytotoxicity of the materials was tested, confirming their biocompatibilty. Regarding the inhaler, its surface was modified in order to improve powder flowability and consequently, to reduce powder retention in the inhaler´s nozzle. New dry powder inhalers (DPIs), with different needle’s diameters, were evaluated in terms of internal resistance and uniformity of the emitted dose. It was observed that they present a mean resistance of 0.06 cmH2O0.5/(L/min) and the maximum emitted dose obtained was 68.9% for the inhaler with higher needle´s diameter (2 mm). Thus, this inhaler was used as a test and modified by the coating with a commonly-used force control agent, magnesium stearate, dried with supercritical carbon dioxide (scCO2) and the uniformity of delivered dose tests were repeated. The modified inhaler showed an increase in emitted dose from 68.9% to 71.3% for lactose and from 30.0% to 33.7% for Foradil.

Economic grand rounds: financial burden of medical care and risk of forgoing care among Europeans with depressive symptoms

Little is known about the financial burden of individuals with depressive symptoms. This study explored that burden, using data from the Survey of Health, Ageing, and Retirement in Europe. To assess the association between depressive symptoms and the individuals' financial burden for medical care and whether they forwent medical care because of costs, logistic regressions were performed that adjusted for age, gender, marital status, education, and chronic diseases. A total of 16,696 noninstitutionalized individuals aged 50-79 years were included in the study. Individuals with depressive symptoms and those without such symptoms bore a similar financial burden. However, individuals with depressive symptoms were at increased risk of forgoing care because of costs, which may worsen their health and financial situation

Key Account Management in Paper and Board Industry- Identification of Key Accounts for Stora Enso Graphical Boards

Tutkimuksen tarkoituksena oli tunnistaa nykyiset sekä potentiaaliset avainasiakkaat case yritykselle. Avainasiakkaat tunnistettiin Chevertonin tunnistamis- ja valintamatriisin avulla, jossa asiakkaan sijoittumista matriisiin arvioidaan asiakkaan houkuttelevuuden sekä toimittajan suhteellisten vahvuuksien avulla. Kriteereiksi avainasiakkaiden tunnistamiseen valittiin asiakkaan vuotuinen ostovolyymi, asiakkaan business-potentiaali sekä case-yrityksen toimittajaosuus. Asiakkaat luokiteltiin avainasiakkaisiin, kehitettäviin avainasiakkaisiin, ylläpidettäviin asiakkaisiin sekä satunnaisiin asiakkaisiin. Tutkimus tarjosi lähtökohdan case-yrityksen uusille avainasiakaspäälliköille sekä osoitti suunnan tulevaisuuden tutkimustarpeille. Aktiivisen tiedonvaihdannan kautta eri myyntikonttoreiden johtohenkilöstön sekä myös yrityksen eri funktionaalisten divisioonien välillä voidaan saavuttaa kilpailuetua kun lähestytään asiakasta toimintojaan järkiperäisesti koordinoineena toimittajana samalla kun asiakkaat keskittävät ostojaan. Jotta yrityksen tavoitteet, markkinamahdollisuudet sekä resurssit olisivat hyvin tasapainossa, tulisi myös asiakaskannattavuutta sekä asiakkaiden strategista merkittävyyttä arvioida ja mitata säännöllisesti tässä tutkimuksessa käytettyjen tunnistuskriteereiden lisäksi.

Corporate Social Responsibility in the Oil and Gas Industry: Environmental Management Systems as a Source of Sustainable Development

The environmental aspect of corporate social responsibility (CSR) expressed through the process of the EMS implementation in the oil and gas companies is identified as the main subject of this research. In the theoretical part, the basic attention is paid to justification of a link between CSR and environmental management. The achievement of sustainable competitive advantage as a result of environmental capital growth and inclusion of the socially responsible activities in the corporate strategy is another issue that is of special significance here. Besides, two basic forms of environmental management systems (environmental decision support systems and environmental information management systems) are explored and their role in effective stakeholder interaction is tackled. The most crucial benefits of EMS are also analyzed to underline its importance as a source of sustainable development. Further research is based on the survey of 51 sampled oil and gas companies (both publicly owned and state owned ones) originated from different countries all over the world and providing reports on sustainability issues in the open access. To analyze their approach to sustainable development, a specifically designed evaluation matrix with 37 indicators developed in accordance with the General Reporting Initiative (GRI) guidelines for non-financial reporting was prepared. Additionally, the quality of environmental information disclosure was measured on the basis of a quality – quantity matrix. According to results of research, oil and gas companies prefer implementing reactive measures to the costly and knowledge-intensive proactive techniques for elimination of the negative environmental impacts. Besides, it was identified that the environmental performance disclosure is mostly rather limited, so that the quality of non-financial reporting can be judged as quite insufficient. In spite of the fact that most of the oil and gas companies in the sample claim the EMS to be embedded currently in their structure, they often do not provide any details for the process of their implementation. As a potential for the further development of EMS, author mentions possible integration of their different forms in a single entity, extension of existing structure on the basis of consolidation of the structural and strategic precautions as well as development of a unified certification standard instead of several ones that exist today in order to enhance control on the EMS implementation.

Examining and describing professional development and continuing education in the personal training and fitness industry : sites and issues of disconnect

The following phenomenologically oriented study examines and describes the relevance and effectiveness of professional development and continuing education programs for real-world situations of personal trainers. The participants were personal trainers, facility managers, and persons involved in the accreditation process. Data collection took place in 3 phases. The first phase consisted of the participants completing the PUMP Questionnaire, followed by focus groups with personal trainers and interviews with managers. The study's 3 data sets required reduction via a content analysis by question, content analysis by existential categories, and further thematic analysis using the lived relation existential dimension. The discussion contains the salient sites and issues of disconnect between clients, personal trainers, and facility managers and how they might affect the personal training experience. The intergenerational disconnect emphasized between Boomers as clients and Millennials as personal trainers requires further exploration and dialogue and underscores the need for different approaches to content and delivery of professional development and continuing education experiences for personal trainers and managers of fitness facilities.

Innovation and adaptation in the Ontario grape and wine industry: An integrated, transdisciplinary response to climate change

With scientific consensus supporting a 4oC increase in global mean temperature over the next century and increased frequency of severe weather events, adaptation to climate change is critical. Given the dynamic and complex nature of climate change, a transdisciplinary approach toward adaptation can create an environment that supports knowledge sharing and innovation, improving existing strategies and creating new ones. The Ontario wine industry provides a case study to illustrate the benefits of this approach. We describe the formation and work of the Ontario Grape and Wine Research Network within this context, and present some preliminary results to highlight the opportunities for innovation that will drive the successful adaption of the Ontario grape and wine industry.

Identification, Weak Instruments and Statistical Inference in Econometrics

We discuss statistical inference problems associated with identification and testability in econometrics, and we emphasize the common nature of the two issues. After reviewing the relevant statistical notions, we consider in turn inference in nonparametric models and recent developments on weakly identified models (or weak instruments). We point out that many hypotheses, for which test procedures are commonly proposed, are not testable at all, while some frequently used econometric methods are fundamentally inappropriate for the models considered. Such situations lead to ill-defined statistical problems and are often associated with a misguided use of asymptotic distributional results. Concerning nonparametric hypotheses, we discuss three basic problems for which such difficulties occur: (1) testing a mean (or a moment) under (too) weak distributional assumptions; (2) inference under heteroskedasticity of unknown form; (3) inference in dynamic models with an unlimited number of parameters. Concerning weakly identified models, we stress that valid inference should be based on proper pivotal functions —a condition not satisfied by standard Wald-type methods based on standard errors — and we discuss recent developments in this field, mainly from the viewpoint of building valid tests and confidence sets. The techniques discussed include alternative proposed statistics, bounds, projection, split-sampling, conditioning, Monte Carlo tests. The possibility of deriving a finite-sample distributional theory, robustness to the presence of weak instruments, and robustness to the specification of a model for endogenous explanatory variables are stressed as important criteria assessing alternative procedures.