Storage requirements for PV power ramp-rate control

Short-term variability in the power generated by large grid-connected photovoltaic (PV) plants can negatively affect power quality and the network reliability. New grid-codes require combining the PV generator with some form of energy storage technology in order to reduce short-term PV power fluctuation. This paper proposes an effective method in order to calculate, for any PV plant size and maximum allowable ramp-rate, the maximum power and the minimum energy storage requirements alike. The general validity of this method is corroborated with extensive simulation exercises performed with real 5-s one year data of 500 kW inverters at the 38.5 MW Amaraleja (Portugal) PV plant and two other PV plants located in Navarra (Spain), at a distance of more than 660 km from Amaraleja.

Caracterización de los barrios de bodegas subterráneas de la denominación de origen calificada Rioja. Estudio y comparación de sus condiciones interiores con las de las nuevas bodegas comerciales

Esta tesis pretende demostrar que las bodegas subterráneas suponen un modelo de construcción eficiente y medioambientalmente sostenible para la crianza y el almacenamiento de vinos. Durante la elaboración, crianza y almacenamiento del vino, las condiciones de temperatura y humedad relativa son determinantes en la calidad final del producto. La aparición de defectos en el vino como consecuencia de altas temperaturas durante el proceso crianza es algo conocido desde el siglo pasado, por lo que los enólogos tratan de alcanzar los parámetros que consideran idóneos para una correcta elaboración y envejecimiento del vino recurriendo en la mayoría de las bodegas a la climatización artificial. Las bodegas subterráneas son construcciones históricas en La Rioja y en el conjunto de los pueblos de la Denominación de Origen Calificada Rioja y el objetivo de esta tesis es demostrar que reúnen de forma natural las condiciones idóneas para la crianza del vino debido al diseño de su construcción y sin necesidad de emplear otras energías para conseguirlo. Además, la presencia de estas construcciones en la Denominación de Origen Calificada Rioja supone el origen de la fama de sus caldos y es un patrimonio cultural hoy en día sin explotar. Para demostrar la importancia de estos barrios de bodegas subterráneas, germen de la Denominación de Origen Calificada Rioja, se han inventariado los barrios de todos los municipios acogidos a ésta. Para ello se han visitado todos los municipios y se han fotografiado sus bodegas. En las visitas realizadas durante la catalogación se ha observado que constituyen hoy en día un patrimonio olvidado, que ha evolucionado hacia merenderos o viviendas, incluso en ocasiones abandonadas o derruidas. La conservación de las construcciones se ha cuidado más en la subzona de Rioja Alta, donde aún se pueden encontrar bodegas donde se elabora vino de forma particular, algo más excepcional de encontrar en La Rioja Baja. También se ha observado que los materiales de construcción de los calados empleados en La Rioja Alta suelen ser de piedra labrada o de sillería, mientras que en La Rioja Baja se recurre más a piedra de río o mampostería. Este trabajo se refleja en 2159 fichas que catalogan las bodegas subterráneas localizadas. Con objeto de demostrar que reúnen las condiciones adecuadas para la crianza, se han instalado sensores que han registrado la temperatura y la humedad relativa en las bodegas subterráneas y en bodegas comerciales de las que se diferencian tanto en el diseño constructivo como en las soluciones adoptadas por estas para reunir los parámetros buscados. Los resultados obtenidos en las bodegas subterráneas muestran que estas construcciones tradicionales presentan menos oscilaciones anuales de temperatura y humedad relativa que las salas de crianza de bodegas comerciales, lo que implica una solución constructiva más adecuada para la crianza y conservación del vino. Para corroborar los resultados obtenidos sobre las condiciones interiores, se ha realizado un análisis sensorial de vinos almacenados y criados en bodegas subterráneas comparándolos con los almacenados sin estar sometidos a un control de estos parámetros, como se puede dar en condiciones domésticas, una vez comercializados cuando el enólogo pierde el control sobre ellos. Los resultados demuestran que los vinos almacenados en domicilios particulares presentan diferencias con los almacenados en bodegas subterráneas. Estos resultados son acordes con los datos obtenidos de los sensores colocados en estas bodegas subterráneas, donde la temperatura máxima anual no supera los 20ºC, considerada como umbral máximos permitido durante la crianza por varios autores. ABSTRACT This thesis aims to demonstrate that the underground cellars represent a model of efficient construction and environmentally sustainable for aging and storing wines. During the production, aging and storing wine, temperature and relative humidity are crucial to the final product quality. The appearance of defects in wine as a result of high temperatures during the aging process is something known since the last century, so that winemakers seek to achieve the parameters considered suitable for proper production and aging of wine using the most wineries to artificial air conditioning. The underground cellars are historical buildings in La Rioja and all the peoples of the Designation of Origin Rioja and the aim of this thesis is to demonstrate that naturally meet the conditions for aging wine due to its construction design and without the use of other energy to get it. Furthermore, the presence of these buildings in the Rioja Denomination of Origin represents the origin of the fame of its wines and is a cultural heritage today untapped. To demonstrate the importance of these areas of underground cellars, germ of the Designation of Origin Rioja, they have been inventoried all the districts of municipalities benefiting from this. This will have visited all municipalities and have photographed their cellars. In visits made during cataloging it has been observed that constitute today a forgotten heritage that has evolved to picnic or homes, sometimes even abandoned or demolished. The conservation of the buildings has been more careful in the subzone of Rioja Alta, where you can still find wine cellars where a particular way, something exceptional to find in La Rioja Baja is made. It has also been observed that the building materials used in the drafts La Rioja Alta usually carved stone or masonry, while in La Rioja Baja is most uses of river stone or masonry. This work is reflected in 2159 cataloging records located underground cellars. In order to demonstrate that they meet the conditions suitable for breeding they were installed sensors that recorded the temperature and relative humidity in the underground cellars and commercial wineries which differ both in the building design and the solutions adopted by sought to gather these parameters. The results obtained in the underground cellars show that these traditional buildings have fewer annual fluctuations of temperature and relative humidity of the aging rooms commercial wineries, which implies a more constructive solution suitable for the breeding and conservation of wine. To corroborate the results obtained on domestic conditions, has made a sensory analysis of wines stored and raised underground cellars compared with stored without being subjected to control these parameters, as can occur in domestic conditions, once marketed as winemaker loses control over them. The results show that the wines stored in private homes have differences with those stored in underground cellars. These results are consistent with data obtained from sensors placed in these underground cellars, where the maximum annual temperature is below 20 ° C, considered as maximum allowable threshold for raising by various authors.

Avaliação do crescimento de Ankistrodesmus braunii em reator tubular empregando diferentes concentrações de nitrato em diferentes condições de cultivo

Microalgas são organismos unicelulares, eucariontes, fotossintetizantes e eficientes fixadores de gás carbônico que apresentam grande potencial para produção de ácidos graxos além de pigmentos, como os carotenóides e a clorofila, de interesse nas indústrias de alimentos, química, farmacêutica e de cosméticos. Dentre as microalgas, o microrganismo Ankistrodesmus braunii vem sendo citado como capaz de produzir grandes quantidades de lipídios, podendo corresponder a até 73% de sua massa seca, com produção de ácidos graxos insaturados, como o ácido linolênico. Esse microrganismo se destaca do ponto de vista industrial por poder ser conduzido em reatores e em meios de cultivo complexos. As fontes de nitrogênio, as concentrações empregadas destes nutrientes, bem como o tipo de processo de cultivo interferem na composição de biomassas fotossintetizantes. O uso de reatores tubulares tem sido estudado e tem se apresentado interessante por permitir a obtenção de altas concentrações celulares. Nesse sentido, este trabalho teve a finalidade de estudar o crescimento de Ankistrodesmus braunii em reator tubular com uso de diferentes quantidades de nitrato de sódio por processos descontínuo, descontínuo alimentado e semi-contínuo. Nos cultivos descontínuos, a máxima concentração celular (Xm) encontrada foi de 1588 ± 11 mg.L-1 com uso de 20 mM de NaNO3. O uso do processo descontínuo alimentado, o qual teve adição de 20 mM de NaNO3 feito num intervalo a cada 48 horas sendo iniciada a adição no primeiro dia, permitiu a obtenção de Xm = 2753 ± 7 mg.L-1; porém não foi possível eliminar a fase lag do cultivo, levando a uma produtividade em células (Px) de 351 ± 1 mg.L-1.dia-1. O processo semi-contínuo foi eficiente para eliminar a fase lag do cultivo, permitindo a obtenção de Xm = 2399 ± 5 mg.L-1 e um aumento de até 50% em Px, que chegou a valores de 525 ± 1 mg.L-1.dia-1 em cultivos com uso de 20 mM de NaNO3. Nesta condição os teores de proteínas e lipídios nas biomassas foram de 34,8 ± 0,2% e 38,6 ± 0,2%, respectivamente. Foi observado que, independentemente do tipo de processo empregado, há um decréscimo do valor do fator de conversão de nitrogênio em células (YX/N) com o aumento da adição de NaNO3. O maior valor de YX/N foi obtido no experimento com processo semi-contínuo e uso de 2 mM de NaNO3 no meio de cultivo, com valor médio de 29,1 ± 0,1 mg mg-1 ao final do segundo ciclo. Porém, nesta condição, o teor de proteínas da biomassa foi de 17,3 ± 0,4%. Já os maiores valores de YX/N encontrados nos processos descontínuo e descontínuo alimentado foram, respectivamente, de 22,5 ± 1,6 e 7,1 ± 0,1 mg mg-1. Os resultados obtidos neste trabalho evidenciam o potencial de Ankistrodesmus braunii como fonte de proteínas e lipídios para uso industrial.

Estudo da cinética de crescimento de células de inseto Sf21 e infecção por baculovírus Anticarsia gemmatalis (AgMNPV) para a produção de bioinseticida.

O interesse em estudar o cultivo das células de inseto está relacionado entre outros usos a sua utilização na produção de biopesticidas. Há muitos anos os pesticidas químicos vêm contribuindo no controle de pragas na agricultura. Entretanto, o uso desses compostos prolongadamente tem resultado na seleção de insetos resistentes e em poluição ambiental. Diante disso, torna-se necessário o desenvolvimento e aprimoramento dos bioinseticidas. No Brasil, o baculovírus Anticarsia gemmatalis multiple nucleopolyhedrovirus (AgMNPV) foi o principal agente de controle biológico da praga da soja Anticarsia gemmatalis. Assim, estudos que viabilizem a produção desses vírus in vitro possibilitariam uma produção mais controlada e de melhor qualidade desses biopesticidas. Neste trabalho, investigou-se a suscetibilidade à infecção por AgMNPV de diferentes linhagens celulares de Sf21 e o crescimento dessas células em diferentes sistemas: cultivos em schotts, em spinner e em biorreator, variando-se a idade do inóculo (IA) e a concentração celular inicial (X0). Constatou-se variação no perfil de infecção das linhagens, sendo as linhagens mais adequadas para a produção de bioinseticida as linhagens de Sf21 denominadas EMBRAPA, UFRN e GibcoG, uma vez que estas apresentaram mais do que 40 % das células com poliedros em cultivos em suspensão, enquanto a linhagem denominada GibcoSF teve menos de 2 % das células infectadas com poliedros. Ao se estudar o efeito do número de subcultivos na morfologia e crescimento celular, foi averiguado um aumento no diâmetro de 10 % e no volume de 26 % das células UFRN em relação às células GibcoSF. Além disso, o crescimento das células UFRN foi 49% menor do que das células GibcoSF. Quando realizado o Delineamento Composto Central Rotacional (DCCR) para se analisar o efeito da IA e a X0 na taxa de crescimento específica máxima (?max) e na concentração celular máxima (Xvmax) em cultivos em schott com células UFRN, obteve-se um modelo empírico. Quando analisadas as variáveis IA e X0 separadamente, não foram encontradas diferenças significativas para as respostas Xvmax e ?max em relação a X0. Para a IA, entretanto, obteve-se os resultados mais satisfatórios para os inóculos com IA de 72 e 96 horas: Xvmax de 5,97.106 cel/mL e 5,99.106 cel/mL, e ?max de 0,70 dia-1 e 0,63 dia-1, respectivamente. Nos cultivos em spinner com células UFRN, foi observada a formação de grumos, o que levou a Xvmax de 2,00.106 cel/mL. No cultivo em biorreator com células UFRN, foi obtido um Xvmax de 6,21.106 cel/mL, ?max de 0,70 dia-1, Qo2 na fase exponencial de 67,3 ± 3,6 .10-18 molO2/cel/s, rendimento de glicose em célula igual a 1,0.109 cel/g de glicose e um rendimento de glutamina em células de 3,0.109 cel/mL. Comprovou-se, portanto, a existência de alterações na infecção entre diferentes linhagens de Sf21; a importância do estado fisiológico da célula nos subcultivos, a ocorrência de mudanças no crescimento celular de acordo com os sistemas de cultivo e o efeito do número de subcultivos na morfologia e crescimento de células Sf21.

Area-under-the-curve monitoring of prednisolone for dose optimization in a stable renal transplant population

Background: Renal transplant recipients were noted to appear cushingoid while on low doses of steroid as part of a triple therapy immunosuppression of cyclosporin A (CsA), prednisolone, and azathioprine. Methods: The study group comprised adult renal transplant recipients with stable graft function who had received their renal allograft a minimum of 1 year previously (43 studies undertaken in 22 men and 20 women) with median daily prednisone dose of 7 mg (range 3-10). The control group was healthy nontransplant subjects [median dose 10 mg (10-30)]. Prednisolone bioavailability was measured using a limited 6-hour area under the curve (AUC), with prednisolone measured using specific HPLC assay. Results: The median prednisolone AUC/mg dose for all transplant recipients was significantly greater than the control group by approximately 50% (316 nmol(.)h/L/mg prednisolone versus 218). AUC was significantly higher in female recipients (median 415 versus 297 for men) and in recipients receiving cyclospotin (348 versus 285). The highest AUC was in women on estrogen supplements who were receiving cyclosporin (median 595). A significantly higher proportion of patients on triple therapy had steroid side effects compared with those on steroid and azathioprine (17/27 versus 4/15), more women than men had side effects (14/16 versus 7/22), and the AUC/mg prednisone was greater in those with side effects than without (median 377 versus 288 nmol-h/L/mg). Discussion: The results are consistent with the hypothesis that CsA increases the bioavailability of prednisolone, most likely through inhibition of beta-glycoprotein. The increased exposure to steroid increased the side-effect profile of steroids in the majority of patients. Because the major contributor to AUC is the maximum postdose concentration, it may be possible to use single-point monitoring (2 hours postdose) for routine clinical studies.

Factors affecting akinete differentiation in Cylindrospermopsis raciborskii (Nostocals, Cyanobacteria)

1. Cylindrospermopsis raciborskii is a potentially toxic freshwater cyanobacterium which can produce akinetes (reproductive spores) that on germinating can contribute to future populations. To further understand factors controlling the formation of these specialised cells, the effects of diurnal temperature fluctuations (magnitude and frequency), in combination with different light intensities and phosphorus concentrations were investigated under laboratory conditions. 2. Akinete differentiation was affected by the frequency of temperature fluctuations. Maximum akinete concentrations were observed in cultures that experienced multiple diurnal temperature fluctuations. 3. Akinete concentrations increased with increasing magnitude of temperature fluctuation. A maximum akinete concentration was achieved under multiple diurnal temperature fluctuations with a magnitude of 10degreesC (25degreesC to 15degreesC). 4. A fourfold increase in light intensity (25-100 mumol m(-2) s(-1)) resulted in an approximate 14-fold increase in akinete concentration. 5. High filterable reactive phosphorus (FRP) concentrations (> 70 mug L-1) in the medium, combined with a multiple diurnal temperature fluctuation of 10degreesC, supported the development of the highest akinete concentration.

Herbicide contamination and the potential impact to seagrass meadows in Hervey Bay, Queensland, Australia

Low concentrations of herbicides (up to 70 ng 1(-1)), chiefly diuron (up to 50 ng 1 (-1)) were detected in surface waters associated with inter-tidal seagrass meadows of Zostera muelleri in Hervey Bay, south-cast Queensland, Australia. Diuron and atrazine (up to 1. 1 ng g(-1) dry weight of sediment) were detected in the sediments of these seagrass meadows. Concentration of the herbicides diuron, simazine and atrazine increased in surface waters associated with seagrass meadows during moderate river flow events indicating herbicides were washed from the catchment to the marine environment. Maximum herbicide concentration (sum of eight herbicides) in the Mary River during a moderate river flow event was 4260 ng 1(-1). No photosynthetic stress was detected in seagrass in this study during low river flow. However, with moderate river flow events, nearshore seagrasses are at risk of being exposed to concentrations of herbicides that are known to inhibit photosynthesis. (c) 2004 Elsevier Ltd. All rights reserved.

Short report: Lack of sex effect on the pharmacokinetics of primaquine

The pharmacokinetics of primaquine have been well defined in male volunteers, but there is little data on the disposition of the drug in women. We compared the kinetics of primaquine in nine male and nine female healthy Australian volunteers after the administration of a single oral dose (30 mg base) of primaquine. No statistical differences were observed in the following kinetic parameters of primaquine between men and women, respectively: maximum plasma concentration (93 +/- 26 and 115 +/- 38 ng/mL; 95% confidence interval [CI] of the mean difference: -55 to 10 ng/mL; P = 0.16), area under the curve (1.1 +/- 0.5 and 1.2 +/- 0.4 mu g.h/mL; 95% CI: -0.6 to 0.3 mu g.h/mL; P = 0.54), and clearance (0.34 +/- 0.12 and 0.39 +/- 0.14 L/h/kg; 95% CI: -0.17 to 0.08 L/h/kg; P = 0.46). The clinical relevance of such findings would suggest that sex does not have to be taken into account as a factor when prescribing primaquine for radical cure or terminal prophylaxis of Plasmodium vivax malaria.

Pharmacokinetics of melatonin in preterm infants

Aims - Preterm infants are deprived of the normal intra-uterine exposure to maternal melatonin and may benefit from replacement therapy. We conducted a pharmacokinetic study to guide potential therapeutic trials. Methods - Melatonin was administered to 18 preterm infants in doses ranging from 0.04–0.6 μg kg−1 over 0.5–6 h. Pharmacokinetic profiles were analyzed individually and by population methods. Results - Baseline melatonin was largely undetectable. Infants receiving melatonin at 0.1 μg kg−1 h−1 for 2 h showed a median half-life of 15.82 h and median maximum plasma concentration of 203.3 pg ml−1. On population pharmacokinetics, clearance was 0.045 l h−1, volume of distribution 1.098 l and elimination half-life 16.91 h with gender (P = 0.047) and race (P < 0.0001) as significant covariates. Conclusions - A 2 h infusion of 0.1 μg kg−1 h−1 increased blood melatonin from undetectable to approximately peak adult concentrations. Slow clearance makes replacement of a typical maternal circadian rhythm problematic. The pharmacokinetic profile of melatonin in preterm infants differs from that of adults so dosage of melatonin for preterm infants cannot be extrapolated from adult studies. Data from this study can be used to guide therapeutic clinical trials of melatonin in preterm infants.

Environmental context of all samples from the Tara Oceans Expedition (2009-2013), about water column features

The Tara Oceans Expedition (2009-2013) sampled the world oceans on board a 36 m long schooner, collecting environmental data and organisms from viruses to planktonic metazoans for later analyses using modern sequencing and state-of-the-art imaging technologies. Tara Oceans Data are particularly suited to study the genetic, morphological and functional diversity of plankton. The present data set provides environmental context to all samples from the Tara Oceans Expedition (2009-2013), about water column features at the sampling location. Based on in situ measurements of... at the...

Aplicação da destilação simulada por cromatografia gasosa e da termogravimetria para a avaliação da influência da redução do teor de enxofre sobre as propriedades físico-químicas do óleo diesel

One of the main problems related to the use of diesel as fuel is the presence of sulfur (S) which causes environmental pollution and corrosion of engines. In order to minimize the consequences of the release of this pollutant, Brazilian law established maximum sulfur content that diesel fuel may have. To meet these requirements, diesel with a maximum sulfur concentration equal to 10 mg/kg (S10) has been widely marketed in the country. However, the reduction of sulfur can lead to changes in the physicochemical properties of the fuel, which are essential for the performance of road vehicles. This work aims to identify the main changes in the physicochemical properties of diesel fuel and how they are related to reduction of sulfur content. Samples of diesel types S10, S500 and S1800 were tested according with the methods of the American Society for Testing and Materials (ASTM). The fuels were also characterized by thermogravimetric analysis (TG) and subjected to physical distillation (ASTM D86) and simulated distillation gas chromatography (ASTM D2887). The results showed that the reduction of sulfur turned the fuel lighter and fluid, allowing a greater applicability to low temperature environments and safer for transportation and storage. Through the simulated distillation data was observed that decreasing sulfur content resulted in higher initial boiling point temperatures and the decreasing of the boiling temperature of the medium and heavy fractions. Thermogravimetric analysis showed a loss event mass attributed to volatilization or distillation of light and medium hydrocarbons. Based on these data, the kinetic behavior of the samples was investigated and it was observed that the activation energies (Ea) did not show significant changes throughout conversion. Considering the average of these energies, the S1800 had the highest Ea during the conversion and the S10 the lowest values

Uso de água produzida na formulação de fluidos de perfuração

Drilling fluids have fundamental importance in the petroleum activities, since they are responsible for remove the cuttings, maintain pressure and well stability, preventing collapse and inflow of fluid into the rock formation and maintain lubrication and cooling the drill. There are basically three types of drilling fluids: water-based, non-aqueous and aerated based. The water-based drilling fluid is widely used because it is less aggressive to the environment and provide excellent stability and inhibition (when the water based drilling fluid is a inhibition fluid), among other qualities. Produced water is generated simultaneously with oil during production and has high concentrations of metals and contaminants, so it’s necessary to treat for disposal this water. The produced water from the fields of Urucu-AM and Riacho da forquilha-RN have high concentrations of contaminants, metals and salts such as calcium and magnesium, complicating their treatment and disposal. Thus, the objective was to analyze the use of synthetic produced water with similar characteristics of produced water from Urucu-AM and Riacho da Forquilha-RN for formulate a water-based drilling mud, noting the influence of varying the concentration of calcium and magnesium into filtered and rheology tests. We conducted a simple 32 factorial experimental design for statistical modeling of data. The results showed that the varying concentrations of calcium and magnesium did not influence the rheology of the fluid, where in the plastic viscosity, apparent viscosity and the initial and final gels does not varied significantly. For the filtrate tests, calcium concentration in a linear fashion influenced chloride concentration, where when we have a higher concentration of calcium we have a higher the concentration of chloride in the filtrate. For the Urucu’s produced water based fluids, volume of filtrate was observed that the calcium concentration influences quadratically, this means that high calcium concentrations interfere with the power of the inhibitors used in the formulation of the filtered fluid. For Riacho’s produced water based fluid, Calcium’s influences is linear for volume of filtrate. The magnesium concentration was significant only for chloride concentration in a quadratic way just for Urucu’s produced water based fluids. The mud with maximum concentration of magnesium (9,411g/L), but minimal concentration of calcium (0,733g/L) showed good results. Therefore, a maximum water produced by magnesium concentration of 9,411g/L and the maximum calcium concentration of 0,733g/L can be used for formulating water-based drilling fluids, providing appropriate properties for this kind of fluid.

Active suspension development based on energy analysis

This research focuses on developing active suspension optimal controllers for two linear and non-linear half-car models. A detailed comparison between quarter-car and half-car active suspension approaches is provided for improving two important scenarios in vehicle dynamics, i.e. ride quality and road holding. Having used a half-car vehicle model, heave and pitch motion are analyzed for those scenarios, with cargo mass as a variable. The governing equations of the system are analysed in a multi-energy domain package, i.e., 20-Sim. System equations are presented in the bond-graph language to facilitate calculation of energy usage. The results present optimum set of gains for both ride quality and road holding scenarios are the gains which has derived when maximum allowable cargo mass is considered for the vehicle. The energy implications of substituting passive suspension units with active ones are studied by considering not only the energy used by the actuator, but also the reduction in energy lost through the passive damper. Energy analysis showed less energy was dissipated in shock absorbers when either quarter-car or half-car controllers were used instead of passive suspension. It was seen that more energy could be saved by using half-car active controllers than the quarter-car ones. Results also proved that using active suspension units, whether quarter-car or half-car based, under those realistic limitations is energy-efficient and suggested.

MOVPE growth and characterization of Al(Ga)N and InAlN/AlGaN quantum wells for UV LED applications

The study of III-nitride materials (InN, GaN and AlN) gained huge research momentum after breakthroughs in the production light emitting diodes (LEDs) and laser diodes (LDs) over the past two decades. Last year, the Nobel Prize in Physics was awarded jointly to Isamu Akasaki, Hiroshi Amano and Shuji Nakamura for inventing a new energy efficient and environmental friendly light source: blue light-emitting diode (LED) from III-nitride semiconductors in the early 1990s. Nowadays, III-nitride materials not only play an increasingly important role in the lighting technology, but also become prospective candidates in other areas, for example, the high frequency (RF) high electron mobility transistor (HEMT) and photovoltaics. These devices require the growth of high quality III-nitride films, which can be prepared using metal organic vapour phase epitaxy (MOVPE). The main aim of my thesis is to study and develop the growth of III-nitride films, including AlN, u-AlGaN, Si-doped AlGaN, and InAlN, serving as sample wafers for fabrication of ultraviolet (UV) LEDs, in order to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources. For application to UV LEDs, reducing the threading dislocation density (TDD) in AlN epilayers on sapphire substrates is a key parameter for achieving high-efficiency AlGaNbased UV emitters. In Chapter 4, after careful and systematic optimisation， a working set of conditions, the screw and edge type dislocation density in the AlN were reduced to around 2.2×108 cm-2 and 1.3×109 cm-2 , respectively, using an optimized three-step process, as estimated by TEM. An atomically smooth surface with an RMS roughness of around 0.3 nm achieved over 5×5 µm 2 AFM scale. Furthermore, the motion of the steps in a one dimension model has been proposed to describe surface morphology evolution, especially the step bunching feature found under non-optimal conditions. In Chapter 5, control of alloy composition and the maintenance of compositional uniformity across a growing epilayer surface were demonstrated for the development of u-AlGaN epilayers. Optimized conditions (i.e. a high growth temperature of 1245 °C) produced uniform and smooth film with a low RMS roughness of around 2 nm achieved in 20×20 µm 2 AFM scan. The dopant that is most commonly used to obtain n-type conductivity in AlxGa1-xN is Si. However, the incorporation of Si has been found to increase the strain relaxation and promote unintentional incorporation of other impurities (O and C) during Si-doped AlGaN growth. In Chapter 6, reducing edge-type TDs is observed to be an effective appoach to improve the electric and optical properties of Si-doped AlGaN epilayers. In addition, the maximum electron concentration of 1.3×1019 cm-3 and 6.4×1018 cm-3 were achieved in Si-doped Al0.48Ga0.52N and Al0.6Ga0.4N epilayers as measured using Hall effect. Finally, in Chapter 7, studies on the growth of InAlN/AlGaN multiple quantum well (MQW) structures were performed, and exposing InAlN QW to a higher temperature during the ramp to the growth temperature of AlGaN barrier (around 1100 °C) will suffer a significant indium (In) desorption. To overcome this issue, quasi-two-tempeature (Q2T) technique was applied to protect InAlN QW. After optimization, an intense UV emission from MQWs has been observed in the UV spectral range from 320 to 350 nm measured by room temperature photoluminescence.

Oceanographic data, oxygen and methane concentrations, and C-CH4 isotope ratios measured at Jaco Scar

Methane (CH4) concentrations and CH4 stable carbon isotopic composition (d13CCH4) were investigated in the water column within Jaco Scar. It is one of several scars formed by massive slides resulting from the subduction of seamounts offshore Costa Rica, a process that can open up structural and stratigraphical pathways for migrating CH4. The release of large amounts of CH4 into the adjacent water column was discovered at the outcropping lowermost sedimentary sequence of the hanging wall in the northwest corner of Jaco Scar, where concentrations reached up to 1,500 nmol L-1. There CH4-rich fluids seeping from the sedimentary sequence stimulate both growth and activity of a dense chemosynthetic community. Additional point sources supplying CH4 at lower concentrations were identified in density layers above and below the main plume from light carbon isotope ratios. The injected CH4 is most likely a mixture of microbial and thermogenic CH4 as suggested by d13CCH4 values between -50 and -62 per mil Vienna Pee Dee Belemnite. This CH4 spreads along isopycnal surfaces throughout the whole area of the scar, and the concentrations decrease due to mixing with ocean water and microbial oxidation. The supply of CH4 appears to be persistent as repeatedly high CH4 concentrations were found within the scar over 6 years. The maximum CH4 concentration and average excess CH4 concentration at Jaco Scar indicate that CH4 seepage from scars might be as significant as seepage from other tectonic structures in the marine realm. Hence, taking into account the global abundance of scars, such structures might constitute a substantial, hitherto unconsidered contribution to natural CH4 sources at the seafloor.