962 resultados para Matlab.
Resumo:
El objetivo general de este proyecto es desarrollar unas prácticas de laboratorio de control de procesos en un entorno virtual, que permita a los alumnos interaccionar con el mismo de manera activa y cercana a situaciones reales que se pueden encontrar en su vida laboral o profesional.
Resumo:
An autonomous vessel, the Offshore Sensing Sailbuoy, was used for wave measurements near the Ekofisk oil platform complex in the North Sea (56.5 N, 3.2 E, operated by ConocoPhilllips) from 6 to 20 November 2015. Being 100% wind propelled, the Sailbuoy has two-way communication via the Iridium network and has the capability for missions of six months or more. It has previously been deployed in the Arctic, Norwegian Sea and the Gulf of Mexico, but this was the first real test for wave measurements. During the campaign it held position about 20km northeast of Ekofisk (on the lee side) during rough conditions. Mean wind speed measured at Ekofisk during the campaign was near 9.8m/s, with a maximum of 20.4m/s, with wind mostly from south and south west. A Datawell MOSE G1000 GPS based 2Hz wave sensor was mounted on the Sailbuoy. Mean significant wave height (Hs 1hr) measured was 3m, whereas maximum Hs was 6m. Mean wave period was 7.7s, while maximum wave height, Hmax, was 12.6m. These measurements have been compared with non-directional Waverider observations at the Ekofisk complex. Mean Hs at Ekofisk was 3.1m, while maximum Hs was 6.5m. Nevertheless, the correlation between the two measurements was high (97%). Spectra comparison was also good, except for low Hs (~1m), where the motion of the vessel seemed to influence the measurements. Nevertheless, the Sailbuoy performed well during this campaign, and results suggests that it is a suitable platform for wave measurements in rather rough sea conditions.
Resumo:
Potential temperature measured with a SBE37 at 35.862ºN, 5.97ºW at 344 meters Depth. Data expand from September the 30th, 2004 to March the 2nd, 2016. Original measurement frequency was 30 minutes, the data presented here is a subsampling that extract the coldest temperature found each 12 hours. The time vector corresponds with the moment in which this minimun temperature is observed.
Resumo:
[ES]Vídeo tutorial de introducción al uso de Matlab R2007a, dirigido a estudiantes de ingenierías