On the crangonidae (Crustacea : Decapoda : Caridea) of the Philippines from the PANGLAO 2004 and PANGLAO 2005 expeditions

Eleven species of the caridean family Crangonidae are reported from the material collected by the Philippine PANGLAO 2004 and PANGLAO 2005 expeditions. Although they have been reported from the Philippines before, all the species have their colouration described and illustrated here for the first time.

Mount Vernon Student Association

A collection of materials concerning the Mount Vernon Student Association during 1967-1969 maintained by the School of Theology Library and Archives.

A simulation-based design method to transfer surface mount RF system to flip-chip die implementation

The flip-chip technology is a high chip density solution to meet the demand for very large scale integration design. For wireless sensor node or some similar RF applications, due to the growing requirements for the wearable and implantable implementations, flip-chip appears to be a leading technology to realize the integration and miniaturization. In this paper, flip-chip is considered as part of the whole system to affect the RF performance. A simulation based design is presented to transfer the surface mount PCB board to the flip-chip die package for the RF applications. Models are built by Q3D Extractor to extract the equivalent circuit based on the parasitic parameters of the interconnections, for both bare die and wire-bonding technologies. All the parameters and the PCB layout and stack-up are then modeled in the essential parts' design of the flip-chip RF circuit. By implementing simulation and optimization, a flip-chip package is re-designed by the parameters given by simulation sweep. Experimental results fit the simulation well for the comparison between pre-optimization and post-optimization of the bare die package's return loss performance. This design method could generally be used to transfer any surface mount PCB to flip-chip package for the RF systems or to predict the RF specifications of a RF system using the flip-chip technology.

Hidden land and changing landscape: Narratives about Mount Khangchendzonga among the Lepcha and the Lhopo

This article explores contemporary ‘hidden land’ narrative constructs of Máyel Lyáng and Beyul Dremojong in Sikkim, India, as conceived by the Lepcha and the Lhopo, two ‘scheduled tribes’. Lepcha and Lhopo narratives about these hidden lands in Mount Khangchendzonga inform us about their contemporary and historical, indigenous and Buddhist contexts and the interactions between these contexts. Lhopo perspectives on the hidden Beyul Dremojong echo classical Tibetan Buddhist ‘revealed treasure’ guidebooks and exist within the complex and reciprocal relationship between the Lhopo and the land they inhabit; development initiatives are understood to have caused illness and death in the Lhopo community of Tashiding, often referred to as the geographical ‘center’ of Beyul Dremojong. Contemporary Lepcha comprehensions of Máyel Lyáng, described in oral narratives within an ethnic community whose cosmology is intimately connected with Mount Khangchendzonga, today show some influence of Lhopo interpretations of Beyul Dremojong and the treasure texts; they also reflect Lepcha fears about cultural dispersion. Present-day narratives about both hidden lands reference notable political events in modern Sikkimese history (encounters with the British; the Chinese occupation of Tibet).

Empirical measurement of illicit tobacco trade in the Philippines.

Cigarette smuggling reduces the price of cigarettes, thwarts youth access restrictions, reduces government revenue, and undercuts the ability of taxes to reduce consumption. The tobacco industry often opposes increases to tobacco taxes on the claim that greater taxes induce more smuggling. To date, little is known about the magnitude of smuggling in the Philippines. his information is necessary to effectively address illicit trade and to measure the impacts of tax changes and the introduction of secure tax markings on illicit trade. This study employs two gap discrepancy methods to estimate the magnitude of illicit trade in cigarettes for the Philippines between 1994 and 2009. First, domestic consumption is compared with tax-paid sales to measure the consumption of illicit cigarettes. Second, imports recorded by the Philippines are compared with exports to the Philippines by trade partners to measure smuggling. Domestic consumption fell short of tax-paid sales for all survey years. The magnitude of these differences and a comparison with a prevalence survey for 2009 suggest a high level of survey under-reporting of smoking. In the late 1990s and the mid 2000s, the Philippines experienced two sharp declines in trade discrepancies, from a high of $750 million in 1995 to a low of $133.7 million in 2008. Discrepancies composed more than one-third of the domestic market in 1995, but only 10 percent in 2009. Hong Kong, Singapore, and China together account for more than 80 percent of the cumulative discrepancies over the period and 74 percent of the discrepancy in 2009. The presence of large discrepancies supports the need to implement an effective tax marking and tobacco track and trace system to reduce illicit trade and support tax collection. The absence of a relation between tax changes and smuggling suggests that potential increases in the excise tax should not be discouraged by illicit trade. Finally, the identification of specific trade partners as primary sources for illicit trade may facilitate targeted efforts in cooperation with these governments to reduce illicit trade.

Geochemical and isotopic evidence for seawater contamination of the hydrothermal system of Taal volcano, Luzon, the Philippines

The hydrologic structure of Taal Volcano has favored development of an extensive hydrothermal system whose prominent feature is the acidic Main Crater Lake (pH<3) lying in the center of an active vent complex, which is surrounded by a slightly alkaline caldera lake (Lake Taal). This peculiar situation makes Taal prone to frequent, and sometimes catastrophic, hydrovolcanic eruptions. Fumaroles, hot springs, and lake waters were sampled in 1991, 1992, and 1995 in order to develop a geochemical model for the hydrothermal system. The low-temperature fumarole compositions indicate strong interaction of magmatic vapors with the hydrothermal system under relatively oxidizing conditions. The thermal waters consist of highly, moderately, and weakly mineralized solutions, but none of them corresponds to either water-rock equilibrium or rock dissolution. The concentrated discharges have high Na contents (>3500 mg/kg) and low SO4/Cl ratios (<0.3). The Br/Cl ratio of most samples suggests incorporation of seawater into the hydrothermal system. Water and dissolved sulfate isotopic compositions reveal that the Main Crater Lake and spring discharges are derived from a deep parent fluid (T≃300°C), which is a mixture of seawater, volcanic water, and Lake Taal water. The volcanic end member is probably produced in the magmatic-hydrothermal environment during absorption of high-temperature gases into groundwater. Boiling and mixing of the parent water give rise to the range of chemical and isotopic characteristics observed in the thermal discharges. Incursion of seawater from the coastal region to the central part of the volcano is supported by the low water levels of the lakes and by the fact that Lake Taal was directly connected to the China sea until the sixteenth century. The depth to the seawater-meteoric water interface is calculated to be 80 and 160 m for the Main Crater Lake and Lake Taal, respectively. Additional data are required to infer the hydrologic structure of Taal. Geochemical surveillance of the Main Crater Lake using the SO4/Cl, Na/K, or Mg/Cl ratio cannot be applied straightforwardly due to the presence of seawater in the hydrothermal system.

Lifetime prediction for power electronics module substrate mount-down solder interconnect

A numerical modeling method for the prediction of the lifetime of solder joints of relatively large solder area under cyclic thermal-mechanical loading conditions has been developed. The method is based on the Miner's linear damage accumulation rule and the properties of the accumulated plastic strain in front of the crack in large area solder joint. The nonlinear distribution of the damage indicator in the solder joints have been taken into account. The method has been used to calculate the lifetime of the solder interconnect in a power module under mixed cyclic loading conditions found in railway traction control applications. The results show that the solder thickness is a parameter that has a strong influence on the damage and therefore the lifetime of the solder joint while the substrate width and the thickness of the baseplate are much less important for the lifetime

On the application of variable frequency microwave technology for processing of individual surface mount components

Dual-section variable frequency microwave systems enable rapid, controllable heating of materials within an individual surface mount component in a chip-on=board assembly. The ability to process devices individually allows components with disparate processing requirements to be mounted on the same assembly. The temperature profile induced by the microwave system can be specifically tailored to the needs of the component, allowing optimisation and degree of cure whilst minimising thermomechanical stresses. This paper presents a review of dual-section microwave technology and its application to curing of thermosetting polymer materials in microelectronics applications. Curing processes using both conventional and microwave technologies are assessed and compared. Results indicate that dual-section microwave systems are able to cure individual surface mount packages in a significantly shorter time, at the expense of an increase in thermomechanical stresses and a greater variation in degree of cure.

An investigation into the rheological properties of different lead-free solder pastes for surface mount applications

Purpose – The purpose of this paper is to investigate the rheological behaviour of three different lead-free solder pastes used for surface mount applications in the electronic industry.Design/methodology/approach – This study concerns the rheological measurements of solder paste samples and is made up of three parts. The first part deals with the measurement of rhelogical properties with three different measuring geometries, the second part looks into the effect of frequencies on oscillatory stress sweep measurements and the final part reports on the characterisation and comparison of three different types of Pb-free solder pastes. Findings – Among the three geometries, the serrated parallel plate was found effective in minimising the wall-slip effect. From the oscillatory stresssweep data with different frequencies; it was observed that the linear visco-elastic region is independent of frequency for all the solder paste samples. To understand the shear thinning behaviour of solder paste, the well known Cross and Carreau models were fitted to the viscosity data. Moreover,creep-recovery and dynamic frequency-sweep tests were also carried out without destroying the sample’s structure and have yielded useful information on the pastes behaviour.Research limitations/implications – More extensive research is needed to fully characterise the wall-slip behaviour during the rheological measurements of solder pastes. Practical implications – The rheological test results presented in this paper will be of important value for research and development, quality control and facilitation of the manufacturing of solder pastes and flux mediums. Originality/value – This paper shows how wall-slip effects can be effectively avoided during rheological measurements of solder pastes. The paper also outlines how different rheological test methods can be used to characterise solder paste behaviours

In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications

This paper investigates the application of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste through the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of lead-free solder paste containing different types of flux. Ultrasonic techniques offer a robust and reliable form of non-destructive testing of materials where access to the sample is restricted or when sample handling can interfere with the monitoring or analysis process due to externally incorporated changes to the material’s physical state or accidental contamination during the removal or testing process. Ultrasonic based techniques are increasingly used for quality control and production monitoring functions which requires evaluation of changes in material properties for a wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capability to take rapid measurements in systems which are optically opaque. The conventional industry approach for characterising the rheological properties of suspensions during processing/packaging stage is mainly through the use of viscometer and some through the use of rheometer. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. The ultrasound technique being proposed provides simple, yet accurate and easy to use solution for the in-situ rheological characterisation of solder pastes which will benefit the materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers). The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.