A Simulation Model for Unified Interrill Erosion and Rill Erosion on Hillslopes

A mathematical model was developed for simulating runoff generation and soil erosion on hillslopes. The model is comprised of three modules: one for overland flow, one for soil infiltration, and one for soil erosion including rill erosion and interrill er

Part I. A study of the velocity structure of the earth by the use of core phases. Part II. The 1971 San Fernando earthquake series focal mechanisms and tectonics

The initial objective of Part I was to determine the nature of upper mantle discontinuities, the average velocities through the mantle, and differences between mantle structure under continents and oceans by the use of P'dP', the seismic core phase P'P' (PKPPKP) that reflects at depth d in the mantle. In order to accomplish this, it was found necessary to also investigate core phases themselves and their inferences on core structure. P'dP' at both single stations and at the LASA array in Montana indicates that the following zones are candidates for discontinuities with varying degrees of confidence: 800-950 km, weak; 630-670 km, strongest; 500-600 km, strong but interpretation in doubt; 350-415 km, fair; 280-300 km, strong, varying in depth; 100-200 km, strong, varying in depth, may be the bottom of the low-velocity zone. It is estimated that a single station cannot easily discriminate between asymmetric P'P' and P'dP' for lead times of about 30 sec from the main P'P' phase, but the LASA array reduces this uncertainty range to less than 10 sec. The problems of scatter of P'P' main-phase times, mainly due to asymmetric P'P', incorrect identification of the branch, and lack of the proper velocity structure at the velocity point, are avoided and the analysis shows that one-way travel of P waves through oceanic mantle is delayed by 0.65 to 0.95 sec relative to United States mid-continental mantle.

A new P-wave velocity core model is constructed from observed times, dt/dΔ's, and relative amplitudes of P'; the observed times of SKS, SKKS, and PKiKP; and a new mantle-velocity determination by Jordan and Anderson. The new core model is smooth except for a discontinuity at the inner-core boundary determined to be at a radius of 1215 km. Short-period amplitude data do not require the inner core Q to be significantly lower than that of the outer core. Several lines of evidence show that most, if not all, of the arrivals preceding the DF branch of P' at distances shorter than 143° are due to scattering as proposed by Haddon and not due to spherically symmetric discontinuities just above the inner core as previously believed. Calculation of the travel-time distribution of scattered phases and comparison with published data show that the strongest scattering takes place at or near the core-mantle boundary close to the seismic station.

In Part II, the largest events in the San Fernando earthquake series, initiated by the main shock at 14 00 41.8 GMT on February 9, 1971, were chosen for analysis from the first three months of activity, 87 events in all. The initial rupture location coincides with the lower, northernmost edge of the main north-dipping thrust fault and the aftershock distribution. The best focal mechanism fit to the main shock P-wave first motions constrains the fault plane parameters to: strike, N 67° (± 6°) W; dip, 52° (± 3°) NE; rake, 72° (67°-95°) left lateral. Focal mechanisms of the aftershocks clearly outline a downstep of the western edge of the main thrust fault surface along a northeast-trending flexure. Faulting on this downstep is left-lateral strike-slip and dominates the strain release of the aftershock series, which indicates that the downstep limited the main event rupture on the west. The main thrust fault surface dips at about 35° to the northeast at shallow depths and probably steepens to 50° below a depth of 8 km. This steep dip at depth is a characteristic of other thrust faults in the Transverse Ranges and indicates the presence at depth of laterally-varying vertical forces that are probably due to buckling or overriding that causes some upward redirection of a dominant north-south horizontal compression. Two sets of events exhibit normal dip-slip motion with shallow hypocenters and correlate with areas of ground subsidence deduced from gravity data. Several lines of evidence indicate that a horizontal compressional stress in a north or north-northwest direction was added to the stresses in the aftershock area 12 days after the main shock. After this change, events were contained in bursts along the downstep and sequencing within the bursts provides evidence for an earthquake-triggering phenomenon that propagates with speeds of 5 to 15 km/day. Seismicity before the San Fernando series and the mapped structure of the area suggest that the downstep of the main fault surface is not a localized discontinuity but is part of a zone of weakness extending from Point Dume, near Malibu, to Palmdale on the San Andreas fault. This zone is interpreted as a decoupling boundary between crustal blocks that permits them to deform separately in the prevalent crustal-shortening mode of the Transverse Ranges region.

Estudio técnico sobre la sistematización de herramientas informáticas en procesos de troquelería para automoción.

[ES]El presente estudio técnico tiene por objeto desarrollar y exponer la metodología empleada en el análisis CAD/CAE de piezas de chapa conformada en troquelería así como poner de manifiesto las ventajas de dicha técnica frente a las técnicas clásicas. Para ello, en él deben figurar una descripción general de dicha metodología, los objetivos de este estudio, los pasos para alcanzarlos y una distribución en forma de cronograma de las tareas que incluye el mismo. El estudio abarca dos partes claramente diferenciadas:  Descripción de un software CAD/CAE y sus múltiples beneficios en el diseño y desarrollo del producto  Desarrollo y exposición de un ejemplo sencillo Los contenidos del documento se estructuran de la siguiente forma: Inicialmente, se exponen los beneficios que reporta el uso de un programa CAE en empresas de conformado de chapa. A continuación, se describen las características generales de un software de elementos finitos. Finalmente se concluye con un caso ejemplo básico que ilustra las características expuestas anteriormente.

The ecology of phytoplankton in Shropshire and Cheshire meres

This review summarizes the findings of 5 years' research (June 1970-June 1975) on the meres of the Shropshire-Cheshire Plain. A mere is a small, shallow lake; supplied principally by ground water, whose chemical composition is infkuenced by the glacial frift through which it is percolating. The seasonal periodicity of the phytoplankton in the meres involved work mainly in the Grose Mere. Here diatoms were typically dominant in Feb & March, green algae in April & May, blue-green algae in early summer and dinoflagellates in late summer. This pattern is broadly similar from year to year, and has been suggested to be representative of a 'regional type'; it is also similar to that described for many of the world's mildly eutrophic temperate lakes. Vertical distribution of phytoplankton is influenced by their buoyancy (or lack of it) of by their ability to swim. A stylized depth-time distribution of 4 major phytoplankton components in Crose Mere is given diagrammatically.

CP and the three pion decay of the K°

The time distribution of the decays of an initially pure K° beam into π+π-π° has been analyzed to determine the complex parameter W (also known as Ƞ^+-° and (x + iy)). The K° beam was produced in a brass target by the interactions of a 2.85 GeV/c π- beam which was generated on an internal target in the Lawrence Radiation Laboratory (LRL) Bevatron. The counters and hodoscopes in the apparatus selected for events with a neutral (K°) produced in the brass target, two charged secondaries passing through a magnet spectrometer and a ɣ-ray shower in a shower hodoscope.

From the 275K apparatus triggers, 148 K → π+π-π° events were isolated. The presence of a ɣ-ray shower in the optical shower chambers and a two-prong vee in the optical spark chambers were devices used to isolate the events. The backgrounds were further reduced by reconstructing the momenta of the two charged secondaries and applying kinematic constraints.

The best fit to the final sample of 148 events distributed between .3 and 7.0 K_S lifetimes gives:

ReW = -.05 ±.17

ImW = +.39 +.35/-.37

This result is consistent with both CPT invariance (ReW = 0) and CP invariance (W = 0). Backgrounds are estimated to be less than 10% and systematic effects have also been estimated to be negligible.

An analysis of the present data on CP violation in this decay mode and other K° decay modes has estimated the phase of ɛ to be 45.3 ± 2.3 degrees. This result is consistent with the super weak theories of CP violation which predicts the phase of ɛ to be 43°. This estimate is in turn used to predict the phase of Ƞ°° to be 48.0 ± 7.9 degrees. This is a substantial improvement on presently available measurements. The largest error in this analysis comes from the present limits on W from the world average of recent experiments. The K → πuʋ mode produces the next largest error. Therefore further experimentation in these modes would be useful.

光致聚合物中单体及粘结剂对全息性能的影响

研究了单体及粘结剂等成份对全息光致聚合物薄膜光存储性能的影响。在相同引发条件下．以丙烯酰胺作为单体时，光聚物的衍射效率明显高于以丙烯酸和N羟甲基丙烯酰胺作为单体时光聚物的衍射效率。向丙烯酰胺中加入少量N-羟甲基丙烯酰胺，可以改善膜表面的光学质量．降低散射光强度，并提高膜的保存时间。在聚乙烯醇膜中单体聚合程度明显优于在聚乙烯吡咯烷酮中的程度，在大分子量的聚乙烯醇中的衍射效率及感光灵敏度高于在小分子量中的衍射效率和感光灵敏度，而且大分子量的聚乙烯醇能够制备厚膜，这是实现全息海量存储的一个重要因素。

A campanha presidencial de 2006 e as estratégias utilizadas por eleitores para o processamento das informações políticas

Esta é uma tese centrada nas estratégias empregadas pelos eleitores para o processamento das informações sobre a política, no contexto da campanha presidencial brasileira de 2006. Propusemos, neste trabalho, um modelo estatístico para o processamento da informação sobre a política, construído a partir da contribuição de estudos realizados nos campos de conhecimento das ciências sociais, da economia, da psicologia cognitiva e da comunicação, e, sobretudo, a partir das evidências extraídas de nosso desenho de pesquisa. Este combinou métodos qualitativo, quantitativo e a análise das estratégias retóricas empregadas por candidatos e partidos políticos no Horário Gratuito de Propaganda Eleitoral (HGPE), elemento dinâmico de nosso estudo, por sintetizar os fluxos de informação no ambiente das campanhas políticas. Esse conjunto de abordagens metodológicas, foi empregado para o estudo de caso do eleitor belo-horizontino, inserido no complexo ambiente informacional das campanhas presidenciais. Com informações incompletas, o eleitor precisou escolher em quem acreditar, lidando com a incerteza dos resultados do pleito e com a incerteza em relação ao comportamento futuro dos atores, cioso de que as retóricas da campanha estavam orientadas para a persuasão. O nosso trabalho procurou mapear as estratégias empregadas pelos eleitores na seleção de temas do debate para a atenção e para o processamento das novas informações sobre a política, adquiridas em interações múltiplas ao longo da campanha. Essa complexa tarefa foi destinada à escolha de por quem ser persuadido. Procuramos responder, neste trabalho, a partir das evidências empíricas, várias preocupações deste campo de conhecimento, entre elas: 1) Em meio a tantos temas abordados na disputa entre partidos e candidatos, quais deles e por que o indivíduo escolhe para prestar atenção e acreditar? 2) Que variáveis intermedeiam e qual o seu peso nesse processo de interação com as novas informações para explicar a tomada de decisão? 3) As prioridades da agenda política do eleitor se alteram ao longo da campanha? 4) Os eleitores ampliam o repertório mais geral de informação sobre a política? 5) As percepções sobre avaliação de governo e em relação aos temas prioritários da agenda do eleitor se alteram ao longo da campanha?

Crystal growth and spectroscopic characterization of Yb-doped and Yb, Na-codoped CaF2 laser crystals by TGT

High-quality 2at%-doped Yb:CaF2 and Yb,Na:CaF2 single crystals with diameter of 76mm were grown by the temperature gradient technique. For the first time, distribution coefficients (KO) of Yb in the two crystals were determined to be 1.07 and 0.91, respectively, by measuring the Yb concentrations at the growth starting position in the as-grown boules. Absorption and emission spectra of the two different crystals were measured at room temperature. Experimental results show that Na+ ions codoping with Yb3+ as charge compensators make Yb3+ ions in CaF2 lattice to be a quasi-single-center system, and greatly suppress the deoxidization of Yb3+ to Yb2+ (c) 2005 Elsevier B.V. All rights reserved.

Taxonomía y distribución de las especies ibéricas del género Sabacon Simon 1879 (Arachnida: Opiliones: Sabaconidae)

[ES] El género Sabacon (Arachnida: Opiliones) tiene distribución holártica, y en la Península Ibérica se restringe a Pirineos y Cordillera Cantábrica. Se menciona la presencia de S.viscayanus en la Sierra Cebollera, a partir del hallazgo de una hembra, lo que constituye el primer registro al sur del Ebro. En este trabajo se ha determinado la subespecie a la que pertenece esa población gracias a la captura de un macho, que corresponde a Sabacon viscayanus viscayanus. Con los ejemplares de las colecciones (ZUPV y CRBA) se han redescrito las especies ibéricas y se ha descrito por primera vez el macho de S. franzi. A su vez, se han construido mapas de distribución de todas las especies con datos citados y de las colecciones propias.

Avaliação de aditivos para remoção catalítica de SOx em unidades de fcc

Os óxidos de enxofre (SOx) são um dos maiores poluentes atmosféricos e um dos precursores da chuva ácida. Um levantamento feito na Petrobrás mostrou que cerca de 17% dos SOx emitidos numa refinaria são oriundos do processo de FCC. Com o avanço dos controles ambientais, traduzido numa legislação mais restritiva, a técnica de incorporação de aditivos para remoção de SOx em UFCCs apresenta-se como a alternativa de menor custo frente outras tecnologias de abate das emissões de SOx. No presente trabalho, foram estudados aditivos constituídos por compostos derivados de hidrotalcitas com a substituição parcial do magnésio e do alumínio por cobre e/ou manganês, sendo estes impregnados ou não por dióxido de cério. Estes aditivos foram submetidos a testes de desempenho em uma unidade multi-propósito acoplada a um micro-GC/TCD. Em todos os testes, a corrente gasosa para a etapa de adsorção oxidativa foi de 1700 ppm de SO2 e 1,5% O2 em He e, para a etapa de regeneração, 30% H2/He. No primeiro conjunto de testes, realizou-se uma adsorção a 720C de 10 min e regeneração com um patamar a 530C, seguido de um TPR até 800C. Observou-se que as amostras impregnadas com cério apresentaram o melhor desempenho na remoção de SO2, indicando que o cério pode ter um papel de promotor da oxidação de SO2 a SO3. Os resultados do TPR mostram que as amostras com cério e com manganês parecem apresentar menores temperaturas de redução dos sulfatos, apesar das maiores liberações de H2S serem identificadas nas amostras com cobre. No segundo conjunto de testes, a adsorção foi a 720C durante 35 min e a regeneração a 650C por 5 minutos em um patamar de 5 minutos, seguida de um TPR até 800C. Para os tempos de sulfatação curtos (5 e 10 min), os resultados confirmaram o efeito positivo que a incorporação de CeO2 apresenta sobre a adsorção oxidativa do SO2. Todavia, para tempos de reação maiores (35 min), não se observou uma correlação clara entre a composição química do catalisador e a quantidade total de SOx removida. Os aditivos foram ainda testados em ciclos de reação-regeneração em condições equivalentes ao segundo conjunto de testes descrito. De um modo geral, os aditivos que contêm cobre têm uma vida útil superior aos demais, possivelmente, pelo fato do cobre ter importante papel na regeneração do aditivo

Conservação de energia em redes de sensores sem fio.

Esta dissertação tem por objetivo propor algoritmos para conservação de energia de uma rede de sensores sem fio (RSSF) aplicada ao monitoramento de um processo suave f(x , y, t), que depende das coordenadas x e y dos nós sensores, e do tempo t, de forma a aumentar a autonomia da rede. Os algoritmos rodam na camada de aplicação de cada nó, e visam a economia de energia dos nós através do gerenciamento da necessidade de transmissões. Após a primeira amostra transmitida, apenas amostras com uma variação percentual maior do que um dado limiar são transmitidas. Além disso, cada nó pode permanecer inativo (economizando energia) entre essas transmissões. Em RSSfs de salto único, são propostos dois algoritmos: um baseado na fonte, onde cada nó é responsável por todo o processamento e tomada de decisões, e outro baseado no sorvedouro, onde todo o processamento e a tomada de decisões são realizadas pelo sorvedouro. Além disso, uma extensão de algoritmo baseado na fonte é proposta, para RSSFs de múltiplos saltos. Através dos resultados obtidos, observa-se que os algoritmos conseguiram uma redução significativa da quantidade de transmissões, o que leva a um aumento do tempo de vida e o erro na reconstrução do processo é apresentada. Desta forma, pode-se conjugar a relação entre tempo de vida máximo e erro de reconstrução mínimo.

细胞色素b6f蛋白复合体中叶绿素 a的性质和功能研究

细胞色素b6f蛋白复合体（Cytochrome b6f complex, Cyt b6f）是光合膜上参与光合作用原初反应过程的主要膜蛋白超分子复合体之一。莱茵衣藻和嗜热蓝细菌的Cyt b6f三维晶体结构均显示，每Cyt b6f单体分子含有1分子Chlorophyll a (Chl a )，充分肯定了Chl a 是Cyt b6f天然成分的观点(Kurisu et al，2003;Stroebel et al，2003)。研究表明不同来源的Cyt b6f中Chla单线激发态寿命(或荧光寿命)并不一样，多数的研究结果认为Cyt b6f中Chla单线激发态寿命只有200ps左右，但是也有Cyt b6f中Chla单线激发态寿命为～600ps的报道;而甲醇中游离Chl a 的单线激发态寿命为4ns左右。针对Cyt b6f中Chla单线激发态寿命快速淬灭的现象，Dashdorj 等(2005)根据晶体结构推测Cyt b6f中Chla单线激发态和邻近的Cyt b6亚基上Tyr105残基发生电子交换传递，从而快速淬灭Chla单线激发态，减少了三线态Chl a和单线态氧的产生，并且认为这是Cyt b6f保护自身不受单线态氧破坏的一种机制，但是这一推测缺乏有力的证据。另外，Cyt b6f中Chla的功能仍然未知。本文以菠菜Cyt b6f为对象，结合多种实验手段，测定了菠菜Cyt b6f中Chl a单线激发态寿命，并对复合体中Chl a 单线激发态淬灭的机理进行了深入研究。此外，我们还对复合体中Chl a 可能的功能进行了初步地探讨。获得了如下的结果： 1．针对不同来源的Cyt b6f中Chla单线激发态寿命（或荧光寿命）测定结果不同的报道，仔细分析了其中的原因，发现除了样品来源的差异外，使用不同的去垢剂可能是一个不可忽视的因素。在实验中，不同的研究者分别采用了十二烷基麦芽糖苷（n-Dodecyl β-D-maltoside，DDM，）和八烷基葡萄糖苷（n-Octyl β-D-glucopyranoside，β－OG)作为溶解样品的去垢剂。因此，本文借助稳态吸收和稳态荧光光谱、瞬态光散射技术，CD光谱和亚皮秒时间分辨吸收光谱等技术，分别研究了这两种去垢剂对Cyt b6f结构和功能的不同影响。结果表明，DDM去垢剂能使Cyt b6f处于较好的分散体系中，其中血红素和Chl a分子处于特定的蛋白环境中，不会导致Cyt b6f变性;而β－OG去垢剂会使Cyt b6f产生聚合现象，其中的血红素和Chl a与蛋白环境的相互作用减弱，和DDM相比其电子传递活性显著降低，Chl a单线激发态寿命延长，Chl a更容易被光破坏。通过这一工作，我们优化和确定了Cyt b6f的溶解条件，为下面的研究工作打下了良好的基础。 2．利用Tyr的特异性修饰剂p-Nitrobenzenesulfonyl Fluoride（NBSF）对Cyt b6f样品进行特性修饰，经原子吸收谱、荧光谱、CD谱、质谱等方法对修饰后的样品进行鉴定，并结合时间分辨飞秒吸收光谱技术，测得修饰后的样品在660nm激发下Chl a 单线激发态寿命延长，从而在实验上提供了Tyr与淬灭Chla单线激发态有关的证据。但是对Cyt b6f 中Chl a瞬态吸收图谱仔细研究表明，菠菜Cyt b6f 中Chl a单线激发态快速淬灭过程中并没有发现Tyr与Chl a 之间发生电子传递时所形成的Chla•¯。以上结果表明，Cyt b6f 中Chl a单线激发态快速的淬灭确实和邻近的Tyr105有关，但是与Dashdorj 等提出的Chla单线激发态和Tyr105残基发生了电子交换传递从而淬灭Chla单线激发态这一想法不符，关于这一问题值得进一步深入研究。 3．红光和绿光对Cyt b6f 照射，Cyt f可以被还原，并且红光比绿光更容易使Cyt f 还原，暗示Cyt f 的还原与Chl a 的关系密切，有可能是Chl a 被激发后，其被激发的电子传给Cyt f。对这一现象的进一步研究表明，Cyt b6f在光照条件下，Cyt f 的还原与体系内C10－PQ库的氧化还原状况相关，氧化型的C10－PQ可能介导电子从Chla传向Cyt f。由于在体内质体醌库的氧化还原状态往往决定Cyt b6f 的氧化还原状态，而通过对Cyt b6f不同氧化和还原状态的吸收谱和荧光谱的研究表明，氧化态和还原态的Cyt b6f 中，Chl a 与蛋白的结合状态是有差异的。这些差异可能暗示着Chl a 分子在行使其功能时与复合体的氧化还原状态是有关系的。通过以上的结果，对Cyt b6f中Chl a 可能的功能进行了假设。 4．此外，我们还发现Cyt b6f具有明显的过氧化物酶活性。在0.1 mmol/L乙酸钠缓冲液，pH3.6，25℃，[H2O2] <40mmol/L的条件下，其催化反应的速度常数为kobs＝26±1.2M•s-1;对H2O2的Km 值为50mmol/L，对guaiacol的Km 值为2mmol/L;反应的最适pH为3.6，最适离子强度为0.1，最适温度为35℃。推测Cyt b6f的这种过氧化物酶活性可能是在胁迫环境下使Cyt b6f中的血红素和Chl a 分子免受H2O2的破坏。

Engineering development of the Lancaster flexible bag.

Describes progress in the last 12 months which has established bag designs and fabrication techniques, giving greater confidence in the life and cost of these components. A quarter scale bag is under construction. Extensive tank testing has also established life time bending moment and mooring load envelopes, enabling hull and mooring design to proceed. A computer simulation programme has been used to check tank model results and to establish turbine and generator operating conditions. This has allowed generation and transmission component design to proceed, and suggests a high operating efficiency can be maintained with a simple control regime. Simple solutions in minor areas such as valve design and damage stability control add to the picture of steady progress in establishing the Lancaster Flexible Bag 's feasibility.

Antibunching and blinking from a single colloidal CdSe quantum dot

We have investigated the optical properties of single CdSe/ZnS nanocrystals by conducting combinations of experiments on antibunching and photoluminescence intermittence under different experimental conditions. Based on photoluminescence in an antibunching experiment, we analyzed the emission lifetime of QDs by using stretched exponentials. The difference between the parameters obtained from average lifetimes and stretched exponents were analyzed by considering the effect of nonradiative emission. An Auger-assisted tunneling model was used to explain the power law exponents of off time distribution. The power law exponent under high excitation power was correlated with a higher Auger ionization rate. Using the parameters obtained from stretched exponential function and power law, the antibunching phenomena at different time and under different excitation intensity were analyzed.

Structure, stability and photoelectronic properties of transition films from amorphous to microcrystalline silicon

A series of hydrogenated silicon films near the threshold of crystallinity was prepared by very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD) from a mixture of SiH4 diluted in H, The effect of hydrogen dilution ratios R-H = [H-2]/[SiH4] on microstructure of the films was investigated. Photoelectronic properties and stability of the films were studied as a function of crystalline fraction. The results show that more the crystalline volume fraction in the silicon films, the higher mobility life-time product (mu tau), better the stability and lower the photosensitivity. Those diphasic films contained 8%-31% crystalline volume fraction can gain both the fine photoelectronic properties and high stability. in the diphasic (contained 12% crystalline volume fraction) solar cell, we obtained a much lower light-induced degradation of similar to 2.9%, with a high initial efficiency of 10.01% and a stabilized efficiency of 9.72% (AM1.5, 100 mW/cm(2)). (c) 2005 Elsevier B.V. All rights reserved.