Life cycle assessment per manufatti in plastica: Il caso di contenitori per rifiuti sanitari

Per lo svolgimento della tesi ci si è rivolti ad un'azienda particolarmente conosciuta per la sua attenzione alle tematiche ambientali: la Mengozzi Rifiuti Sanitari S.p.A.. L'impianto, sito a Forlì, comprende una sezione dedicata alla gestione di contenitori in materiale plastico per rifiuti sanitari e una sezione per la termovalorizzazione di questi. Si è incentrato lo studio sulla prima parte dell'impianto che si occupa della produzione, del trasporto verso la struttura in cui è utilizzato, del ritorno in azienda e del riuso per più cicli previa sanificazione fino al riciclo per lo stampaggio di nuovi contenitori. Si è pensato di prendere in considerazione i bidoni che sono gestiti dalla Mengozzi S.p.A. e se ne è svolta un'analisi LCA comparativa tra il contenitore effettivamente in carico all'azienda e un altro ipotetico con le medesime caratteristiche strutturali ma gestito diversamente (incenerito dopo un solo utilizzo). Essendo il contenitore di plastica si è inoltre svolta una comparazione tra 2 materiali termoplastici di massa aventi caratteristiche molto simili, quali sono il polietilene ad alta densità (HDPE) e il polipropilene (PP). Il software che è stato utilizzato per condurre l'analisi è SimaPro 7.3 e il metodo lo svizzero IMPACT 2002+. Nello svolgimento si sono considerati 12 bidoni monouso che hanno in pratica la stessa funzione dell'unico bidone sanificato dopo ogni utilizzo e infine riciclato. Dall'analisi è emerso (come facilmente ipotizzabile) che il bidone riusato genera un impatto ambientale nettamente minore rispetto a quello monouso mentre non vi è apprezzabile differenza tra differente tipologia di materiale termoplastico costituente il bidone stesso: L'importanza della scelta della più adeguata modalità di gestione del fine vita e del materiale di composizione in termini ambientali è più marcata a causa di un'attenzione sempre crescente verso le tematiche di sostenibilità.

Life cycle assessment comparativa di processi di estrazione di poliidrossialcanoati da colture batteriche

I materiali plastici trovano ampie applicazioni in ogni aspetto della vita e delle attività industriali. La maggior parte delle plastiche convenzionali non sono biodegradabili e il loro accumulo è una minaccia per il pianeta. I biopolimeri presentano vantaggi quali: la riduzione del consumo delle risorse e la riduzione delle emissioni CO2, offrendo un importante contributo allo sviluppo sostenibile. Tra i biopolimeri più interessanti troviamo il poliidrossibutirrato (PHB), l’oggetto di questo studio, che è il più noto dei poliidrossialcanoati. Questo polimero biodegradabile mostra molte somiglianze con il polipropilene. La tesi consiste nell’applicazione del Life Cycle Assessment a processi di estrazione del PHB da colture batteriche. In essa sono valutate le prestazioni ambientali di 4 possibili processi alternativi, sviluppati dal CIRI EA, che utilizzano il dimetilcarbonato (DMC) e di 3 processi che utilizzano solventi alogenati (cloroformio, diclorometano, dicloroetano). Per quanto riguarda i processi che utilizzano come solvente di estrazione il DMC, due sono gli aspetti indagati e per i quali differiscono le alternative: la biomassa di partenza (secca o umida), e il metodo di separazione del polimero dal solvente (per evaporazione del DMC oppure per precipitazione). I dati primari di tutti gli scenari sono di laboratorio per cui è stato necessario realizzare un up scaling industriale di tutti i processi. L’up scaling è stato realizzato in collaborazione con il Dipartimento di Ingegneria Civile Chimica Ambientale e dei Materiali. La valutazione delle prestazioni ambientali è stata fatta rispetto a tutte le categorie d’impatto raccomandate dall’Handbook della Commissione Europea, di queste solo alcune sono state analizzate nel dettaglio. Tutti i risultati mostrano un andamento simile, in cui gli impatti dei processi che utilizzano DMC sono inferiori a quelli dei solventi alogenati. Fra i processi che impiegano DMC, l’alternativa più interessante appare quella che impiega biomassa di partenza secca e raccolta del PHB per precipitazione.

Applicazione delle metodologie LCA ed LCC per la valutazione ambientale ed economica della produzione del pellet realizzato tramite scarti agricoli di potature degli uliveti

Nel seguente lavoro è stata sviluppata una analisi ambientale ed economica del ciclo di vita del pellet, realizzato con scarti agricoli dalle potature degli uliveti. L’obiettivo di tale lavoro è dimostrare se effettivamente l’utilizzo del pellet apporti vantaggi sia dal punto di vista ambientale sia da quello economico. In tale progetto si sviluppano quindi un LCA, Life cycle analysis, e un LCC, Life Cycle Cost, secondo gli steps standard suggeriti da tali metodologie. Per effettuare l’analisi del ciclo di vita è stato utilizzato il software Simapro che ha permesso di valutare gli impatti ambientali sulle varie categorie di impatto incluse. In particolare sono stati considerati due metodologie, una midpoint ed una endpoint, ossia l’Ecoindicator 99 e il CML2 baseline 2000. Per le valutazioni finali è stata poi utilizzata la normativa spagnola sugli impatti ambientali, BOE 21/2013 del 9 dicembre, che ci ha permesso di caraterizzare le varie categorie d’impatto facendo emergere quelle più impattate e quelle meno impattate. I risultati finali hanno mostrato che la maggior parte degli impatti sono di tipo compatibile e moderato; pochi, invece, sono gli impatti severi e compatibili, che si riscontrano soprattutto nella categoria d’impatto “Fossil Fuels”. Per quanto riguarda invece l’analisi economica, si è proceduto effettuando una valutazione iniziale fatta su tutto il processo produttivo considerato, poi una valutazione dal punto di vista del produttore attraverso una valutazione dell’investimento ed infine, una valutazione dal punto di vista del cliente finale. Da queste valutazioni è emerso che ciò risulta conveniente dal punto di vista economico non solo per il produttore ma anche per l’utente finale. Per il primo perché dopo i primi due anni di esercizio recupera l’investimento iniziale iniziando ad avere un guadagno; e per il secondo, poiché il prezzo del pellet è inferiore a quello del metano. Quindi, in conclusione, salvo cambiamenti in ambito normativo ed economico, l’utilizzo del pellet realizzato da scarti di potature di uliveti risulta essere una buona soluzione per realizzare energia termica sia dal punto di vista ambientale, essendo il pellet una biomassa il cui ciclo produttivo non impatta severamente sull’ambiente; sia dal punto di vista economico permettendo al produttore introiti nell’arco del breve tempo e favorendo al cliente finale un risparmio di denaro sulla bolletta.

ASSESSING INFORMATION CONFLICTS DURING THE PROJECT LIFE CYCLE

The objective of this research is to investigate the consequences of sharing or using information generated in one phase of the project to subsequent life cycle phases. Sometimes the assumptions supporting the information change, and at other times the context within which the information was created changes in a way that causes the information to become invalid. Often these inconsistencies are not discovered till the damage has occurred. This study builds on previous research that proposed a framework based on the metaphor of ‘ecosystems’ to model such inconsistencies in the 'supply chain' of life cycle information (Brokaw and Mukherjee, 2012). The outcome of such inconsistencies often results in litigation. Therefore, this paper studies a set of legal cases that resulted from inconsistencies in life cycle information, within the ecosystems framework. For each project, the errant information type, creator and user of the information and their relationship, time of creation and usage of the information in the life cycle of the project are investigated to assess the causes of failure of precise and accurate information flow as well as the impact of such failures in later stages of the project. The analysis shows that the misleading information is mostly due to lack of collaboration. Besides, in all the studied cases, lack of compliance checking, imprecise data and insufficient clarifications hinder accurate and smooth flow of information. The paper presents findings regarding the bottleneck of the information flow process during the design, construction and post construction phases. It also highlights the role of collaboration as well as information integration and management during the project life cycle and presents a baseline for improvement in information supply chain through the life cycle of the project.

Comparative Life Cycle Assessment of the Conventional Façade SOS Natura and the Natural Water Tank Façade

The construction industry produces great environmental impacts to the planet. In order to tackle this problem, the European Union has put into effect Regulation No 305/2011, which compels the construction products manufacturers to carry out environmental performance studies of these products and thus make public the impact they cause on the environment. The aim of this research is to make known the environmental impacts of the SOS Natura Conventional Façade (CF) solution, obtained within the research project "SOS Natura, Vegetal Architectural Solutions" developed by the Department of Construction and Technology in Architecture of the School of Architecture of the Technical University of Madrid (Spain). In addition, we report an environmental comparative with the Natural Water Tank Façade (NWTF), studied previously by the same work group and included in the same research project.We present as well an uncertainty analysis for both façades. Following the study conducted we conclude that the NWTF profile has a slightly better environmental behaviour when compared to the CF profile for the entire life cycle in most of the impact categories analysed in this study. However it should also be noted that, in detail and at stage level, the NWTF presents a higher environmental impact than the CF.

Dynamic Life Cycle Assessment Modeling Approaches for Transboundary Energy Feedstocks

The rise of the twenty-first century has seen the further increase in the industrialization of Earth’s resources, as society aims to meet the needs of a growing population while still protecting our environmental and natural resources. The advent of the industrial bioeconomy – which encompasses the production of renewable biological resources and their conversion into food, feed, and bio-based products – is seen as an important step in transition towards sustainable development and away from fossil fuels. One sector of the industrial bioeconomy which is rapidly being expanded is the use of biobased feedstocks in electricity production as an alternative to coal, especially in the European Union.

As bioeconomy policies and objectives increasingly appear on political agendas, there is a growing need to quantify the impacts of transitioning from fossil fuel-based feedstocks to renewable biological feedstocks. Specifically, there is a growing need to conduct a systems analysis and potential risks of increasing the industrial bioeconomy, given that the flows within it are inextricably linked. Furthermore, greater analysis is needed into the consequences of shifting from fossil fuels to renewable feedstocks, in part through the use of life cycle assessment modeling to analyze impacts along the entire value chain.

To assess the emerging nature of the industrial bioeconomy, three objectives are addressed: (1) quantify the global industrial bioeconomy, linking the use of primary resources with the ultimate end product; (2) quantify the impacts of the expaning wood pellet energy export market of the Southeastern United States; (3) conduct a comparative life cycle assessment, incorporating the use of dynamic life cycle assessment, of replacing coal-fired electricity generation in the United Kingdom with wood pellets that are produced in the Southeastern United States.

To quantify the emergent industrial bioeconomy, an empirical analysis was undertaken. Existing databases from multiple domestic and international agencies was aggregated and analyzed in Microsoft Excel to produce a harmonized dataset of the bioeconomy. First-person interviews, existing academic literature, and industry reports were then utilized to delineate the various intermediate and end use flows within the bioeconomy. The results indicate that within a decade, the industrial use of agriculture has risen ten percent, given increases in the production of bioenergy and bioproducts. The underlying resources supporting the emergent bioeconomy (i.e., land, water, and fertilizer use) were also quantified and included in the database.

Following the quantification of the existing bioeconomy, an in-depth analysis of the bioenergy sector was conducted. Specifically, the focus was on quantifying the impacts of the emergent wood pellet export sector that has rapidly developed in recent years in the Southeastern United States. A cradle-to-gate life cycle assessment was conducted in order to quantify supply chain impacts from two wood pellet production scenarios: roundwood and sawmill residues. For reach of the nine impact categories assessed, wood pellet production from sawmill residues resulted in higher values, ranging from 10-31% higher.

The analysis of the wood pellet sector was then expanded to include the full life cycle (i.e., cradle-to-grave). In doing to, the combustion of biogenic carbon and the subsequent timing of emissions were assessed by incorporating dynamic life cycle assessment modeling. Assuming immediate carbon neutrality of the biomass, the results indicated an 86% reduction in global warming potential when utilizing wood pellets as compared to coal for electricity production in the United Kingdom. When incorporating the timing of emissions, wood pellets equated to a 75% or 96% reduction in carbon dioxide emissions, depending upon whether the forestry feedstock was considered to be harvested or planted in year one, respectively.

Finally, a policy analysis of renewable energy in the United States was conducted. Existing coal-fired power plants in the Southeastern United States were assessed in terms of incorporating the co-firing of wood pellets. Co-firing wood pellets with coal in existing Southeastern United States power stations would result in a nine percent reduction in global warming potential.

The Life Cycle of Corporate Venture Capital

This paper establishes the life-cycle dynamics of Corporate Venture Capital (CVC) to explore the information acquisition role of CVC investment in the process of corporate innovation. I exploit an identification strategy that allows me to isolate exogenous shocks to a firm's ability to innovate. Using this strategy, I first find that the CVC life cycle typically begins following a period of deteriorated corporate innovation and increasingly valuable external information, lending support to the hypothesis that firms conduct CVC investment to acquire information and innovation knowledge from startups. Building on this analysis, I show that CVCs acquire information by investing in companies with similar technological focus but have a different knowledge base. Following CVC investment, parent firms internalize the newly acquired knowledge into internal R&D and external acquisition decisions. Human capital renewal, such as hiring inventors who can integrate new innovation knowledge, is integral in this step. The CVC life cycle lasts about four years, terminating as innovation in the parent firm rebounds. These findings shed new light on discussions about firm boundaries, managing innovation, and corporate information choices.

Seawater carbonate chemistry and effects of CO2 and their modulation by light in the life-cycle stages of the coccolithophore Emiliania huxleyi strains RCC 1216 and 1217 during experiments, 2012

The effects of ocean acidification on the life-cycle stages of the coccolithophore Emiliania huxleyi and their by light were examined. Calcifying diploid and noncalcifying haploid cells (Roscoff culture collection 1216 and 1217) were acclimated to present-day and elevated CO2 partial pressures (PCO2; 38.5 vs. 101.3 Pa, ., 380 vs. 1000 matm) under low and high light (50 vs. 300 mmol photons m-2 s-1). Growth rates as well as quotas and production rates of C and N were measured. Sources of inorganic C for biomass buildup were using a 14C disequilibrium assay. Photosynthetic O2 evolution was measured as a function of dissolved inorganic C and light by means of membrane-inlet mass spectrometry. The diploid stage responded to elevated PCO2 by shunting resources from the production of particulate inorganic C toward organic C yet keeping the production of total particulate C constant. As the effect of ocean acidification was stronger under low light, the diploid stage might be less affected by increased acidity when energy availability is high. The haploid stage maintained elemental composition and production rates under elevated PCO2. Although both life-cycle stages involve different ways of dealing with elevated PCO2, the responses were generally modulated by energy availability, being typically most pronounced under low light. Additionally, PCO2 responses resembled those induced by high irradiances, indicating that ocean acidification affects the interplay between energy-generating processes (photosynthetic light reactions) and processes competing for energy (biomass buildup and calcification). A conceptual model is put forward explaining why the magnitude of single responses is determined by energy availability.

Applying life cycle assessment to analyze the environmental sustainability of public transit modes for the City of Toronto

One challenge related to transit planning is selecting the appropriate mode: bus, light rail transit (LRT), regional express rail (RER), or subway. This project uses data from life cycle assessment to develop a tool to measure energy requirements for different modes of transit, on a per passenger-kilometer basis. For each of the four transit modes listed, a range of energy requirements associated with different vehicle models and manufacturers was developed. The tool demonstrated that there are distinct ranges where specific transit modes are the best choice. Diesel buses are the clear best choice from 7-51 passengers, LRTs make the most sense from 201-427 passengers, and subways are the best choice above 918 passengers. There are a number of other passenger loading ranges where more than one transit mode makes sense; in particular, LRT and RER represent very energy-efficient options for ridership ranging from 200 to 900 passengers. The tool developed in the thesis was used to analyze the Bloor-Danforth subway line in Toronto using estimated ridership for weekday morning peak hours. It was found that ridership across the line is for the most part actually insufficient to justify subways over LRTs or RER. This suggests that extensions to the existing Bloor-Danforth line should consider LRT options, which could service the passenger loads at the ends of the line with far greater energy efficiency. It was also clear that additional destinations along the entire transit line are necessary to increase the per passenger-kilometer energy efficiency, as the current pattern of commuting to downtown leaves much of the system underutilized. It is hoped that the tool developed in this thesis can be used as an additional resource in the transit mode decision-making process for many developing transportation systems, including the transit systems across the GTHA.

Life-cycle modification in open oceans accounts for genome variability in a cosmopolitan phytoplankton

Emiliania huxleyi is the most abundant calcifying plankton in modern oceans with substantial intraspecific genome variability and a biphasic life cycle involving sexual alternation between calcified 2N and flagellated 1N cells. We show that high genome content variability in Emiliania relates to erosion of 1N-specific genes and loss of the ability to form flagellated cells. Analysis of 185 E. huxleyi strains isolated from world oceans suggests that loss of flagella occurred independently in lineages inhabiting oligotrophic open oceans over short evolutionary timescales. This environmentally linked physiogenomic change suggests life cycling is not advantageous in very large/diluted populations experiencing low biotic pressure and low ecological variability. Gene loss did not appear to reflect pressure for genome streamlining in oligotrophic oceans as previously observed in picoplankton. Life-cycle modifications might be common in plankton and cause major functional variability to be hidden from traditional taxonomic or molecular markers.

Life-cycle modification in open oceans accounts for genome variability in a cosmopolitan phytoplankton

Emiliania huxleyi is the most abundant calcifying plankton in modern oceans with substantial intraspecific genome variability and a biphasic life cycle involving sexual alternation between calcified 2N and flagellated 1N cells. We show that high genome content variability in Emiliania relates to erosion of 1N-specific genes and loss of the ability to form flagellated cells. Analysis of 185 E. huxleyi strains isolated from world oceans suggests that loss of flagella occurred independently in lineages inhabiting oligotrophic open oceans over short evolutionary timescales. This environmentally linked physiogenomic change suggests life cycling is not advantageous in very large/diluted populations experiencing low biotic pressure and low ecological variability. Gene loss did not appear to reflect pressure for genome streamlining in oligotrophic oceans as previously observed in picoplankton. Life-cycle modifications might be common in plankton and cause major functional variability to be hidden from traditional taxonomic or molecular markers.

Social media to support collaboration in the product life cycle of SMEs

Abstract : The use of social media tools to support small and medium-sized enterprises (SME) to support their business activities throughout the product life cycle (PLC) phases represents an interesting opportunity. SMEs operate in very competitive environments, and face significant challenges primarily caused by their size disadvantage. By nature, social media tools and platforms can enable them to overcome some of these challenges, as they are often very inexpensive, familiar and easy to use, allowing them to reach large audiences they would not be able to reach with traditional and expensive marketing initiatives. To provide solutions to this problem, this research identified three main objectives. The first objective was to draw a picture of the existing academic literature on the use of social media tools in the PLC context to better understand how these tools were studied and used in businesses, and for what purpose. Second, this research aimed at understanding how SMEs actually use social media tools to support their different business activities to identify the gap between academic research and actual business practices. Finally, based on the findings highlighted from the previous objectives, this research aimed at developing theory on this topic by proposing a conceptual framework of customer engagement enabled by social media. The conceptual framework aimed at answering general questions that emerged from the initial two objectives: Why do some SMEs use social media to support customer engagement, while others do not? Why do firms use different social media tools to support their customer engagement initiatives? Why does the scope of customer engagement initiatives (i.e., across different PLC phases) vary between SMEs? What are the potential outcomes of conducting customer engagement initiatives for the organizing firms? In order to achieve these research objectives, the methodology employed for this research is threefold. First, a systematic literature review was performed in order to properly understand how the use of social media tools in the PLC context had been studied. The final results consisted of 78 academic articles which were analyzed based on their bibliometric information and their content. Second, in order to draw the contrast between the academic publications and managerial reality of SMEs, six semi-structured interviews were conducted to understand how these firms actually use social media to support different activities in each of the PLC phases. Third, five additional semi-structured interviews were performed to gather a deeper understanding of this phenomenon and generate theory to support the proposed conceptual framework. The conceptual framework focuses on the degree of customer engagement, which is comprised of the scope (PLC phases) of customer engagement and the technology (social media tools) employed to support these initiatives. Two sets of antecedents were examined, firm motivators and firm impediments, as they could both potentially affect the scope and the social media tools used to support customer engagement initiatives. Finally, potential customer engagement outcomes for SMEs developing these initiatives were also examined. The semi-structured interviews lasted approximately 25-35 minutes, and were performed using an interview grid consisting of 24 open-ended questions. The interview grid was developed based on the findings of the systematic literature review, and this qualitative approach allowed for a rich understanding of the interviewed SMEs’ use of social media tools to support and engage customers in their different PLC activities. The main results highlighted by this project demonstrate that this field is relatively recent and sees constant increase in research interest since 2008. However, most of the academic research focuses on the use of social media tools to support innovation activities during the new product development process, while the interviewed firms almost exclusively used the tools to engage customers in the later phases of the PLC, primarily for promotion, customer service support, and business development activities. Interestingly, the interviewed firms highlighted several benefits of using social media tools to engage customers, some of which could help them overcome certain size disadvantages previously mentioned. These firms are in need of further guidelines to properly implement such initiatives and reap the expected benefits. Results suggest that SMEs are far behind both large companies and academic research in their use of social media to engage customers in different business activities. The proposed conceptual framework serves as a great tool to better understand their reality and eventually better support them in their social media and customer engagement efforts. However, this framework needs to be further developed and improved. This research project provides a 360-degree view of the phenomenon of the use of social media to support customer engagement for SMEs, by providing both a thorough systematic review of the academic research and an understanding of the managerial reality of SMEs behind this phenomenon. From this analysis, a conceptual framework is then proposed and serves as a stepping stone for future researchers who are interested in developing theory in this field.

Life-cycle assessment of microalgae biodiesel: a review

Microalgae are an attractive way to produce biofuels due to the ability to accumulate lipids and very high photosynthetic yields. This article presents a review of life-cycle assessment studies of microalgae biodiesel production, including an analysis of modeling choices and assumptions. A high variation in GHG emissions (between -0.75 and 2.9 kg CO2eq MJ-1) was found and the main causes were investigated, namely modeling choices (e.g. the approach used to deal with multifunctionality), and a high parameter uncertainty in microalgae cultivation, harvesting and oil extraction processes.

A life cycle framework for governance of Intermodal terminals; planning, operations and strategic management.

This chapter establishes a framework for the governance of intermodal terminals throughout their life cycle, based on the product life cycle. The framework covers the initial planning by the public sector, the public/private split in funding and ownership, the selection of an operator, ensuring fair access to all users, and finally reconcessioning the terminal to a new operator, managing the handover and maintaining the terminal throughout its life cycle. This last point is especially important as industry conditions change and the terminal's role in the transport network comes under threat, either by a lack of demand or by increased demand requiring expansion, redesign and reinvestment. Each stage of the life cycle framework is operationalised based on empirical examples drawn from research by the authors on intermodal terminal planning and funding, the tender process and concession and operation contracts. In future the framework can be applied in additional international contexts to form a basis for transport cost analysis, logistics planning and government policy.

Engraulis encrasicolus (Linnaeus, 1758): technical report about extraction and recognition of the digestive tract contents in early stages of the life cycle

The study of ichthyio-plankton stages and its relations with the environment and other organisms is therefore crucial for a correct use of fishery resources. In this context, the extraction and the analysis of the content of the digestive tract, is a key method for the identification of the diet in early larval stages, the determination of the resources they rely on and possibly a comparison with the diet of other species. Additionally this approach could be useful in determination on occurrence of species competition. This technique is preceded by the analysis of morphometric data (Blackith & Reyment, 1971; Marcus, 1990), that is the acquisition of quantitative variables measured from the morphology of the object of study. They are linear distances, count, angles and ratios. The subsequent application of multivariate statistical methods, aims to quantify the changes in morphological measures between and within groups, relating them to the type and size of prey and evaluate if some changes appear in food choices along the larvae growth.