Modeling of gas adsorption equilibrium over a wide range of pressure: A thermodynamic approach based on equation of state

A thermodynamic approach based on the Bender equation of state is suggested for the analysis of supercritical gas adsorption on activated carbons at high pressure. The approach accounts for the equality of the chemical potential in the adsorbed phase and that in the corresponding bulk phase and the distribution of elements of the adsorption volume (EAV) over the potential energy for gas-solid interaction. This scheme is extended to subcritical fluid adsorption and takes into account the phase transition in EAV The method is adapted to gravimetric measurements of mass excess adsorption and has been applied to the adsorption of argon, nitrogen, methane, ethane, carbon dioxide, and helium on activated carbon Norit R I in the temperature range from 25 to 70 C. The distribution function of adsorption volume elements over potentials exhibits overlapping peaks and is consistently reproduced for different gases. It was found that the distribution function changes weakly with temperature, which was confirmed by its comparison with the distribution function obtained by the same method using nitrogen adsorption isotherm at 77 K. It was shown that parameters such as pore volume and skeleton density can be determined directly from adsorption measurements, while the conventional approach of helium expansion at room temperature can lead to erroneous results due to the adsorption of helium in small pores of activated carbon. The approach is a convenient tool for analysis and correlation of excess adsorption isotherms over a wide range of pressure and temperature. This approach can be readily extended to the analysis of multicomponent adsorption systems. (C) 2002 Elsevier Science (USA).

Is Cadinella ornatissima a chomodorid? Sperm ultra structure in an enigmatic nudibranch (Opisthobranchia Mollusca)

Sperm ultrastructure is described for the nudibranch gastropod Cadlinella ornatissima, type species of the genus Cadlinella (Thiele). Although C. ornatissima exhibits most of the sperm features characteristic of other Opisthobranchia and the Pulmonata (a small, rounded acrosomal vesicle, a complex, helical, mitochondrial derivative - partially paracrystalline, coarse fibres associated with the axoneme), it also possesses a number of previously undescribed and possibly unique features (a longitudinally inrolled acrosomal pedestal, an axial structure within the cavity of the acrosomal pedestal, an electron-dense collar at the anterior region of the acrosomal pedestal, the presence of crystalloid bodies within the glycogen helices of the mitochondrial derivative). To our knowledge this is the first report of crystalloid bodies in mature sperm of any mollusc. Collectively this evidence raises questions concerning the affinities and systematic position of Cadlinella within the Nudibranchia. The peculiar nature of the sperm differences, in comparison with other investigated nudibranchs, suggest that Cadlinella is not easily linked to either the Cadlinidae or Chromodorididae, and should be considered incertae sedis.

Comparative sperm ultrastructure of the Baikalian endemic prosobranch gastropods

Mature euspermatozoan ultrastructure is described for seven species of the rissooidean family Baicaliidae (endemic to Lake Baikal, Russia)-Liobaicalia stiedae, Teratobaikalia ciliata, T. macrostoma, Baicalia carinata, Pseudobaikalia pulla, Maackia bythiniopsis, M. variesculpta, and M. herderiana. For comparison with these species and previously investigated Rissooidea, two species of the Lake Baikal endemic genus Benedictia (B. cf. fragilis and B. baicalensis; Hydrobiidae: Benedictiinae of some authors, Benedictiidae of other authors) in addition to Lithoglyphus naticoides (Hydrobiidae: Lithoglyphinae) and Bythinella austriaca (Hydrobiidae: Bythinellinae) were also investigated. Paraspermatozoa were not observed in any of the species examined, supporting the view that these cells are probably absent in the Rissooidea. In general, the euspermatozoa of all species examined resemble those of many other caenogastropods (basally invaginated acrosomal vesicle, mid-piece with 7-13 helical mitochondria, an annulus, glycogen piece with nine peri-axonemal tracts of granules). However, the presence of a completely flattened acrosomal vesicle and a specialized peri-axonemal membranous sheath (a scroll-like arrangement of 4-6 double membranes) at the termination of the mid-piece, clearly indicates a close relationship between the Baicaliidae and other rissooidean families possessing these features (Bithyniidae, Hydrobiidae, Pyrgulidae, and Stenothyridae). Euspermatozoa of Benedictia, Lithoglyphus, Bythinella, and Pyrgula all have a solid nucleus, which exhibits a short, posterior invagination (housing the centriolar complex and proximal portion of the axoneme). Among the Rissooidea, this form of nucleus is known to occur in the Bithyniidae, Hydrobiidae, Truncatellidae, Pyrgulidae, Iravadiidae, Pomatiopsidae, and Stenothyridae. In contrast, the euspermatozoa of the Baicaliidae all have a long, tubular nucleus, housing not only the centriolar derivative, but also a substantial portion of the axoneme. Among the Rissooidea, a tubular nuclear morphology has previously been seen in the Rissoidae, which could support the view, based on anatomical grounds, that the Baicaliidae may have arisen from a different ancestral source than the Hydrobiidae. However, the two styles of nuclear morphology (short, solid versus long, tubular) occur widely within the Caenogastropoda, and sometimes both within a single family, thereby reducing the phylogenetic importance of nuclear differences within the Rissooidea. More significantly, the occurrence of the highly unusual membranous sheath within the mid-piece region in the Baicaliidae appears to tie this family firmly to the Bithyniidae + Hydrobiidae + Stenothyridae + Pyrgulidae assemblage. Eusperm features of Benedictia spp. strongly resemble those of hydrobiids and bithyniids, and neither support recognition of a distinct family Benedictiidae (at best this is a subfamily of Hydrobiidae) nor any close connection with the hydrobiid subfamily Lithoglyphinae.

gamma-alumina nanofibers prepared from aluminum hydrate with poly(ethylene oxide) surfactant

Introducing poly(ethylene oxide) surfactant to aluminum hydrate colloids can effectively direct the crystal growth of boehmite and the crystal morphology of final gamma-alumina crystallites. Fibrous crystallites of gamma-alumina about 3-4 nm thick and 30-60 nm long are obtained. They stack randomly, resulting in a structure with a low contact area between the fibers but with a very large porosity. Such a structure exhibits strong resistance to sintering when heated to high temperatures. A sample retains a BET surface area of 68 m(2)/g, after being heated to 1473 K. The surfactant molecules form micelles that interact with the colloid particles of aluminum hydroxide through hydrogen bonding. This interaction is not sufficient to change the intrinsic crystal structure of boehmite, but induces profound changes in the morphology of boehmite crystallites and their growth. The surfactant-induced fiber formation (SIFF) process has distinct features from templated synthesis but shows similarities in some respects to biomineralization processes in which inorganic crystals with complex morphological shapes can be formed in biological systems. SIFF offers an effective approach to create new nanostructures of inorganic oxide from aqueous media.

Independent and conjugate eye movements during optokinesis in teleost fish

In response to movements involving a large part of the visual field, the eyes of vertebrates typically show an optokinetic nystagmus, a response in which both eyes are tightly yoked. Using a comparative approach, this study sets out to establish whether fish with independent spontaneous eye movements show independent optokinetic nystagmus in each eye. Two fish with independent spontaneous eye movements, the pipefish Corythoichthyes intestinalis and the sandlance Limnichthyes fasciatus were compared with the butterflyfish Chaetodon rainfordi, which exhibits tightly yoked eye movements. In the butterflyfish a single whole-field stimulus elicits conjugate optokinesis, whereas the sandlance and pipefish show asynchronous optokinetic movements. In a split drum experiment, when both eyes were stimulated in opposite directions with different speeds, both the sandlance and the pipefish compensated independently with each eye. The optokinetic response in the butterflyfish showed some disconjugacy but was generally confused. When one eye was occluded, the seeing eye was capable of driving the occluded eye in both the butterflyfish and the pipefish but not in the sandlance. Monocular occlusion therefore unmasks a link between the two eyes in the pipefish, which is overridden when both eyes receive visual input. The sandlance never showed any correlation between the eyes during optokinesis in all stimulus conditions. This suggests that there are different levels of linkage between the two eyes in the oculomotor system of teleosts, depending on the visual input.

One-dimensional quantum walk with unitary noise

The effect of unitary noise on the discrete one-dimensional quantum walk is studied using computer simulations. For the noiseless quantum walk, starting at the origin (n=0) at time t=0, the position distribution P-t(n) at time t is very different from the Gaussian distribution obtained for the classical random walk. Furthermore, its standard deviation, sigma(t) scales as sigma(t)similar tot, unlike the classical random walk for which sigma(t)similar toroott. It is shown that when the quantum walk is exposed to unitary noise, it exhibits a crossover from quantum behavior for short times to classical-like behavior for long times. The crossover time is found to be Tsimilar toalpha(-2), where alpha is the standard deviation of the noise.

A unified model of flames as gasdynamic discontinuities

Viewed on a hydrodynamic scale, flames in experiments are often thin so that they may be described as gasdynamic discontinuities separating the dense cold fresh mixture from the light hot burned products. The original model of a flame as a gasdynamic discontinuity was due to Darrieus and to Landau. In addition to the fluid dynamical equations, the model consists of a flame speed relation describing the evolution of the discontinuity surface, and jump conditions across the surface which relate the fluid variables on the two sides of the surface. The Darrieus-Landau model predicts, in contrast to observations, that a uniformly propagating planar flame is absolutely unstable and that the strength of the instability grows with increasing perturbation wavenumber so that there is no high-wavenumber cutoff of the instability. The model was modified by Markstein to exhibit a high-wavenumber cutoff if a phenomenological constant in the model has an appropriate sign. Both models are postulated, rather than derived from first principles, and both ignore the flame structure, which depends on chemical kinetics and transport processes within the flame. At present, there are two models which have been derived, rather than postulated, and which are valid in two non-overlapping regions of parameter space. Sivashinsky derived a generalization of the Darrieus-Landau model which is valid for Lewis numbers (ratio of thermal diffusivity to mass diffusivity of the deficient reaction component) bounded away from unity. Matalon & Matkowsky derived a model valid for Lewis numbers close to unity. Each model has its own advantages and disadvantages. Under appropriate conditions the Matalon-Matkowsky model exhibits a high-wavenumber cutoff of the Darrieus-Landau instability. However, since the Lewis numbers considered lie too close to unity, the Matalon-Matkowsky model does not capture the pulsating instability. The Sivashinsky model does capture the pulsating instability, but does not exhibit its high-wavenumber cutoff. In this paper, we derive a model consisting of a new flame speed relation and new jump conditions, which is valid for arbitrary Lewis numbers. It captures the pulsating instability and exhibits the high-wavenumber cutoff of all instabilities. The flame speed relation includes the effect of short wavelengths, not previously considered, which leads to stabilizing transverse surface diffusion terms.

A modified Weibull distribution

A new lifetime distribution capable of modeling a bathtub-shaped hazard-rate function is proposed. The proposed model is derived as a limiting case of the Beta Integrated Model and has both the Weibull distribution and Type I extreme value distribution as special cases. The model can be considered as another useful 3-parameter generalization of the Weibull distribution. An advantage of the model is that the model parameters can be estimated easily based on a Weibull probability paper (WPP) plot that serves as a tool for model identification. Model characterization based on the WPP plot is studied. A numerical example is provided and comparison with another Weibull extension, the exponentiated Weibull, is also discussed. The proposed model compares well with other competing models to fit data that exhibits a bathtub-shaped hazard-rate function.

Are Ichthyosporea animals or fungi? Bayesian phylogenetic analysis of elongation factor 1α of Ichthyophonus irregularis

Ichthyosporea is a recently recognized group of morphologically simple eukaryotes, many of which cause disease in aquatic organisms. Ribosomal RNA sequence analyses place Ichthyosporea near the divergence of the animal and fungal lineages, but do not allow resolution of its exact phylogenetic position. Some of the best evidence for a specific grouping of animals and fungi (Opisthokonta) has come from elongation factor 1alpha, not only phylogenetic analysis of sequences but also the presence or absence of short insertions and deletions. We sequenced the EF-1alpha gene from the ichthyosporean parasite Ichthyophonus irregularis and determined its phylogenetic position using neighbor-joining, parsimony and Bayesian methods. We also sequenced EF-1alpha genes from four chytrids to provide broader representation within fungi. Sequence analyses and the presence of a characteristic 12 amino acid insertion strongly indicate that I. irregularis is a member of Opisthokonta, but do not resolve whether I. irregularis is a specific relative of animals or of fungi. However, the EF-1alpha of I. irregularis exhibits a two amino acid deletion heretofore reported only among fungi. (C) 2003 Elsevier Science (USA). All rights reserved.

Dryout phenomena in a three-phase fixed-bed reactor

Understanding the mechanism of liquid-phase evaporation in a three-phase fixed-bed reactor is of practical importance, because the reaction heat is usually 7-10 times the vaporization heat of the liquid components. Evaporation, especially the liquid dryout, can largely influence the reactor performance and even safety. To predict the vanishing condition of the liquid phase, Raoult's law was applied as a preliminary approach, with the liquid vanishing temperature defined based on a liquid flow rate of zero. While providing correct trends, Raoult's law exhibits some limitation in explaining the temperature profile in the reactor. To comprehensively understand the whole process of liquid evaporation, a set of experiments on inlet temperature, catalyst activity, liquid flow rate, gas flow rate, and operation pressure were carried out. A liquid-region length-predicting equation is suggested based on these experiments and the principle of heat balance.

A Generic Library for GUI Reasoning and Testing

Graphical user interfaces (GUIs) make software easy to use by providing the user with visual controls. Therefore, correctness of GUI's code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper presents a generic model for language-independent reverse engineering of graphical user interface based applications, and we explore the integration of model-based testing techniques in our approach, thus allowing us to perform fault detection. A prototype tool has been constructed, which is already capable of deriving and testing a user interface behavioral model of applications written in Java/Swing.

Development of a library for clients of ONVIF video cameras: challenges and solutions

The interoperability of IP video equipment is a critical problem for surveillance systems and other video application developers. ONVIF is one of the two specifications addressing the standardization of networked devices interface, and it is based on SOAP. This paper addresses the development of an ONVIF library to develop clients of video cameras. We address the choice of a web services toolkit, and how to use the selected toolkit to develop a basic library. From that, we discuss the implementation of features that ...

XAdES4J: a java library for XAdES signature services

As comunicações electrónicas são cada vez mais o meio de eleição para negócios entre entidades e para as relações entre os cidadãos e o Estado (e-government). Esta diversidade de transacções envolve, muitas vezes, informação sensível e com possível valor legal. Neste contexto, as assinaturas electrónicas são uma importante base de confiança, fornecendo garantias de integridade e autenticação entre os intervenientes. A produção de uma assinatura digital resulta não só no valor da assinatura propriamente dita, mas também num conjunto de informação adicional acerca da mesma, como o algoritmo de assinatura, o certificado de validação ou a hora e local de produção. Num cenário heterogéneo como o descrito anteriormente, torna-se necessária uma forma flexível e interoperável de descrever esse tipo de informação. A linguagem XML é uma forma adequada de representar uma assinatura neste contexto, não só pela sua natureza estruturada, mas principalmente por ser baseada em texto e ter suporte generalizado. A recomendação XML Signature Syntax and Processing (ou apenas XML Signature) foi o primeiro passo na representação de assinaturas em XML. Nela são definidas sintaxe e regras de processamento para criar, representar e validar assinaturas digitais. As assinaturas XML podem ser aplicadas a qualquer tipo de conteúdos digitais identificáveis por um URI, tanto no mesmo documento XML que a assinatura, como noutra qualquer localização. Além disso, a mesma assinatura XML pode englobar vários recursos, mesmo de tipos diferentes (texto livre, imagens, XML, etc.). À medida que as assinaturas electrónicas foram ganhando relevância tornou-se evidente que a especificação XML Signature não era suficiente, nomeadamente por não dar garantias de validade a longo prazo nem de não repudiação. Esta situação foi agravada pelo facto da especificação não cumprir os requisitos da directiva 1999/93/EC da União Europeia, onde é estabelecido um quadro legal para as assinaturas electrónicas a nível comunitário. No seguimento desta directiva da União Europeia foi desenvolvida a especificação XML Advanced Electronic Signatures que define formatos XML e regras de processamento para assinaturas electrónicas não repudiáveis e com validade verificável durante períodos de tempo extensos, em conformidade com a directiva. Esta especificação estende a recomendação XML Signature, definindo novos elementos que contêm informação adicional acerca da assinatura e dos recursos assinados (propriedades qualificadoras). A plataforma Java inclui, desde a versão 1.6, uma API de alto nível para serviços de assinaturas digitais em XML, de acordo com a recomendação XML Signature. Contudo, não existe suporte para assinaturas avançadas. Com este projecto pretende-se desenvolver uma biblioteca Java para a criação e validação de assinaturas XAdES, preenchendo assim a lacuna existente na plataforma. A biblioteca desenvolvida disponibiliza uma interface com alto nível de abstracção, não tendo o programador que lidar directamente com a estrutura XML da assinatura nem com os detalhes do conteúdo das propriedades qualificadoras. São definidos tipos que representam os principais conceitos da assinatura, nomeadamente as propriedades qualificadoras e os recursos assinados, sendo os aspectos estruturais resolvidos internamente. Neste trabalho, a informação que compõe uma assinatura XAdES é dividia em dois grupos: o primeiro é formado por características do signatário e da assinatura, tais como a chave e as propriedades qualificadoras da assinatura. O segundo grupo é composto pelos recursos assinados e as correspondentes propriedades qualificadoras. Quando um signatário produz várias assinaturas em determinado contexto, o primeiro grupo de características será semelhante entre elas. Definiu-se o conjunto invariante de características da assinatura e do signatário como perfil de assinatura. O conceito é estendido à verificação de assinaturas englobando, neste caso, a informação a usar nesse processo, como por exemplo os certificados raiz em que o verificador confia. Numa outra perspectiva, um perfil constitui uma configuração do serviço de assinatura correspondente. O desenho e implementação da biblioteca estão também baseados no conceito de fornecedor de serviços. Um fornecedor de serviços é uma entidade que disponibiliza determinada informação ou serviço necessários à produção e verificação de assinaturas, nomeadamente: selecção de chave/certificado de assinatura, validação de certificados, interacção com servidores de time-stamp e geração de XML. Em vez de depender directamente da informação em causa, um perfil — e, consequentemente, a operação correspondente — é configurado com fornecedores de serviços que são invocados quando necessário. Para cada tipo de fornecedor de serviços é definida um interface, podendo as correspondentes implementações ser configuradas de forma independente. A biblioteca inclui implementações de todos os fornecedores de serviços, sendo algumas delas usadas for omissão na produção e verificação de assinaturas. Uma vez que o foco do projecto é a especificação XAdES, o processamento e estrutura relativos ao formato básico são delegados internamente na biblioteca Apache XML Security, que disponibiliza uma implementação da recomendação XML Signature. Para validar o funcionamento da biblioteca, nomeadamente em termos de interoperabilidade, procede-se, entre outros, à verificação de um conjunto de assinaturas produzidas por Estados Membros da União Europeia, bem como por outra implementação da especificação XAdES.