Repeatability of surface EMG variables in the sternocleidomastoid and anterior scalene muscles

In this study we examined the repeatability and reliability of the surface electromyographic (sEMG) signal mean frequency (MNF), average rectified value (ARV) and conduction velocity (CV) measured for the sternocleidomastoid (SCM) and the anterior scalene (AS) muscles in nine healthy volunteers during 15-s isometric cervical flexion contractions at 50% of the maximal voluntary contraction level over 3 non-consecutive days. Repeatability and reliability estimates were obtained for the initial values and rates of change of each sEMG variable by using both the Intraclass Correlation Coefficient (ICC) and the normalised standard error of the mean (nSEM). Results from SCM indicated good levels of repeatability for the initial value and slope of ARV (ICC > 65%). For the AS, high levels of repeatability were identified for the initial value of MNF (ICC > 70%) and the slope of ARV (ICC > 75%). Values of nSEM in the range 2.8-7.2% were obtained for the initial values of MNF and CV for both SCM and AS, indicating clinically acceptable measurement precision. The low value obtained for the nSEM of the initial value of MNF for the AS, in combination with the high ICC, indicates that of all of the variables examined, this variable could offer the best normative index to distinguish between subjects with and without neck pain, and represents the sEMG variable of choice for future evaluation purposes.

Toward a better understanding of the influences on physical activity: The role of determinants, correlates, causal variables, mediators, moderators, and confounders

Background: For research on physical activity interventions to progress systematically, the mechanisms of action must be studied. In doing so, the research methods and their associated concepts and terminology become more complex. It is particularly important to clearly distinguish among determinants, correlates, mediators, moderators, and confounder variables used in physical activity research. This article examines the factors that are correlated with and that may have a causal relationship to physical activity. Methods and Results: We propose that the term correlate be used, instead of determinant, to describe statistical associations or correlations between measured variables and physical activity. Studies of the correlates of physical activity are reviewed. The findings of these studies can help to critique existing theories of health behavior change and can provide hypotheses to be tested in intervention studies from which it is possible to draw causal inferences. Mediator, moderator, and confounder variables can act to influence measured changes in physical activity. Intervening causal variables that are necessary to complete a cause-effect pathway between an intervention and physical activity are termed mediators. The relationship between an intervention and physical activity behaviors may vary for different groups; the strata by which they vary are levels of moderators of the relationship. Other factors may distort or affect the observed relationships between program exposure and physical activity, and are known as confounders. Conclusions: Consistent use of terms and additional research on mediators and moderators of intervention effects will improve our ability to understand and influence physical activity.

Testing landscape metrics as indicators of habitat loss and fragmentation in continuous eucalypt forests (Queensland, Australia)

Landscape metrics are widely applied in landscape ecology to quantify landscape structure. However, many are poorly tested and require rigorous validation if they are to serve as reliable indicators of habitat loss and fragmentation, such as Montreal Process Indicator 1.1e. We apply a landscape ecology theory, supported by exploratory and confirmatory statistical techniques, to empirically test landscape metrics for reporting Montreal Process Indicator 1.1e in continuous dry eucalypt forests of sub-tropical Queensland, Australia. Target biota examined included: the Yellow-bellied Glider (Petaurus australis); the diversity of nectar and sap feeding glider species including P. australis, the Sugar Glider P. breviceps, the Squirrel Glider P. norfolcensis, and the Feathertail Glider Acrobates pygmaeus; six diurnal forest birds species; total diurnal bird species diversity; and the density of nectar-feeding diurnal bird species. Two scales of influence were considered: the stand-scale (2 ha), and a series of radial landscape extents (500 m - 2 km; 78 - 1250 ha) surrounding each fauna transect. For all biota, stand-scale structural and compositional attributes were found to be more influential than landscape metrics. For the Yellow-bellied Glider, the proportion of trace habitats with a residual element of old spotted-gum/ironbark eucalypt trees was a significant landscape metric at the 2 km landscape extent. This is a measure of habitat loss rather than habitat fragmentation. For the diversity of nectar and sap feeding glider species, the proportion of trace habitats with a high coefficient of variation in patch size at the 750 m extent was a significant landscape metric. None of the landscape metrics tested was important for diurnal forest birds. We conclude that no single landscape metric adequately captures the response of the region's forest biota per se. This poses a major challenge to regional reporting of Montreal Process Indicator 1.1e, fragmentation of forest types.

The use of stochastic dynamic programming in optimal landscape reconstruction for metapopulations

A decision theory framework can be a powerful technique to derive optimal management decisions for endangered species. We built a spatially realistic stochastic metapopulation model for the Mount Lofty Ranges Southern Emu-wren (Stipiturus malachurus intermedius), a critically endangered Australian bird. Using diserete-time Markov,chains to describe the dynamics of a metapopulation and stochastic dynamic programming (SDP) to find optimal solutions, we evaluated the following different management decisions: enlarging existing patches, linking patches via corridors, and creating a new patch. This is the first application of SDP to optimal landscape reconstruction and one of the few times that landscape reconstruction dynamics have been integrated with population dynamics. SDP is a powerful tool that has advantages over standard Monte Carlo simulation methods because it can give the exact optimal strategy for every landscape configuration (combination of patch areas and presence of corridors) and pattern of metapopulation occupancy, as well as a trajectory of strategies. It is useful when a sequence of management actions can be performed over a given time horizon, as is the case for many endangered species recovery programs, where only fixed amounts of resources are available in each time step. However, it is generally limited by computational constraints to rather small networks of patches. The model shows that optimal metapopulation, management decisions depend greatly on the current state of the metapopulation,. and there is no strategy that is universally the best. The extinction probability over 30 yr for the optimal state-dependent management actions is 50-80% better than no management, whereas the best fixed state-independent sets of strategies are only 30% better than no management. This highlights the advantages of using a decision theory tool to investigate conservation strategies for metapopulations. It is clear from these results that the sequence of management actions is critical, and this can only be effectively derived from stochastic dynamic programming. The model illustrates the underlying difficulty in determining simple rules of thumb for the sequence of management actions for a metapopulation. This use of a decision theory framework extends the capacity of population viability analysis (PVA) to manage threatened species.

Variables affecting the fine grinding of minerals using stirred mills

Base metal resources are becoming more fine-grained and refractory and minerals separation processes require these ores to be milled to increasingly finer sizes. To cope with very fine grinding to below a P-80 of approximately 15 mum stirred milling technology has been adopted from other industries Neither this technology, nor the basic concepts of fine grinding, are well understood by the minerals processing industry. Laboratory studies were therefore carried out in order to investigate fine milling using different types of stirred mills. The variables analysed were stirrer speed, grinding media type and size, slurry solids content as well as the feed and product size. The results of the testwork have shown that all of these variables affect the grinding efficiency. The ratio of media size to material size was found to be of particular significance. The results were also analysed using the stress intensity approach and the optimum stress intensity ranges for the most efficient grinding were determined. Application of the results for process optimisation in the industrial size units is also discussed in this paper. (C) 2003 Elsevier Science Ltd. All rights reserved.

Outcome variables for osteoarthritis clinical trials: the OMERACT-OARSI set of responder criteria

Improvement in analysis and reporting results of osteoarthritis (OA) clinical trials has been recently obtained because of harmonization and standardization of the selection of outcome variables (OMERACT 3 and OARSI). Moreover, OARSI has recently proposed the OARSI responder criteria. This composite index permits presentation of results of symptom modifying clinical trials in OA based on individual patient responses (responder yes/no). The 2 organizations (OMERACT and OARSI) established. a task force aimed at evaluating: (1) the variability of observed placebo and active treatment effects using the OARSI responder criteria; and (2) the possibility of proposing a simplified set of criteria. The conclusions of the task force were presented and discussed during the OMERACT 6 conference, where a simplified set of responder criteria (OMERACT-OARSI set of criteria) was proposed.

The variety of variables in automated real-time refinement

The refinement calculus is a well-established theory for deriving program code from specifications. Recent research has extended the theory to handle timing requirements, as well as functional ones, and we have developed an interactive programming tool based on these extensions. Through a number of case studies completed using the tool, this paper explains how the tool helps the programmer by supporting the many forms of variables needed in the theory. These include simple state variables as in the untimed calculus, trace variables that model the evolution of properties over time, auxiliary variables that exist only to support formal reasoning, subroutine parameters, and variables shared between parallel processes.

La adopción del cuadro de mando integral en organizaciones portuguesas: variables contingentes e institucionales

Este artículo tiene como objetivo identificar y analizar un conjunto de variables contingentes e institucionales que pueden potencialmente influir en el conocimiento e implementación del Cuadro de Mando Integral (CMI) en las organizaciones portuguesas pertenecientes al sector público y privado.

La adopción del cuadro de mando integral en organizaciones portuguesas: variables contingentes e institucionales

Esta comunicación tiene como objetivo identificar y analizar un conjunto de variables contingentes e institucionales que pueden potencialmente influir en el conocimiento e implementación del Cuadro de Mando Integral (CMI) en las organizaciones portuguesas pertenecientes al sector público y privado. Para comprobar empíricamente las hipótesis de investigación formuladas hemos recurrido a los datos obtenidos mediante la aplicación de un cuestionario postal a 591 organizaciones públicas y 549 organizaciones privadas portuguesas, con una tasa de respuesta total del 31,3%. Los resultados obtenidos indican la asociación entre el conocimiento CMI y el grado de formación de los empleados, así como entre la implementación del CMI y la realización de cursos de formación. Por otro lado, no hemos obtenido evidencia empírica respecto a la posible relación entre la implementación del CMI y el grado de comunicación interna, el recurso a consultores externos, cuestiones de “modas de gestión” y la búsqueda de legitimidad.

Historical and conceptual landscape of the character

This paper was developed with the intention of broadly demonstrating the complexity of the area known recently as character development, as a creative process methods and implementation. It searches the understanding of the character itself, its place in the narrative and its reception by the reader or target audience. It is a multidisciplinary tool that faces a multitude of challenges from an increasingly demanding public and with specific goals in mind, and yet it also gives us valuable insight over how we interact with one another and the world around us, teaching us how to transfer such knowledge into fiction promoting empathic bonds between the reader and the characters. The human tendency to create is limitless and as old as mankind itself, we create, recreate and reinterpret and then populate such tales with believable characters from who we learn, and experience events and tales that shape our very lives.

Cuadro de mando integral en empresas portuguesas: variables contextuales e internas

Este artículo tiene como objetivo analizar la relación entre un conjunto de variables contextuales e internas y la adopción del Cuadro de Mando Integral (CMI) en las empresas privadas portuguesas. Como medio básico para la recolección de los datos se ha realizado una encuesta postal a través del envío de un cuestionario a 549 empresas privadas portuguesas, con una tasa de respuesta del 28,2%. Los resultados obtenidos indican que existe una asociación positiva entre la implementación del CMI y el grado de diversidad de los bienes y servicios de la organización; la propiedad de grupos extranjeros; y el tamaño organizacional.