Quality potential of DIP and hardwood CTMP based raw materials in woodcontaining printing paper

The objective of the thesis was to define the quality potential of DIP and hardwood CTMP based raw material furnish for a printing paper production and to define the end product's pulp-based boundary conditions especially when thinking of Chinese markets. Although the Chinese paper industry expands rapidly, the production of some paper grades is still exiguous. Especially the softwood resources are limited in Asia, thus the purpose of the thesis was to find out the possibilities to produce printing paper in China from local raw materials. Bleached CTMP can be produced, for example, from fast-growing hardwood species like eucalyptus and poplar. Therefore in this thesis it was examined if good quality printing paper is possible to produce by using deinked pulp and hardwood CTMP based furnish. In the first section of experimental part, various deinked pulps and chemithermomechanical pulps were compared. The deinked pulps were from China, Central Europe and Finland. Central European was made for magazine papers, and the Chinese as well as the Finnish pulps were made for newsprints. Two of the BCTMPs were from China and those both were made from poplar, whereas one BCTMP was made from eucalyptus in a pilot plant. There were significant differences especially between BCTMPs and their paper properties. In the second section of experimental part, the deinked pulp and eucalyptus BCTMP were blended to produce handsheets. The results show that producing the highest quality printing paper would be difficult from these raw materials. Deinked pulp affected especially the strength and optical properties as well as calender blackening. The BCTMP was found to have effects mostly on the smoothness, strength and optical properties as well as calender blackening.

Influence of the cultivation system in the aroma of the volatile compounds and total antioxidant activity of passion fruit

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A very limited number of keywords (main patterns) describes all sequences of the human variable heavy (VH) and κ (Vκ) domains

Sequences of the variable heavy (VH) and κ (Vκ) domains of Ig structures were divided into 21 fragments that correspond to strands, loops, or parts of these structural units of the variable domains. Amino acid sequences of fragments (termed “words”) were collected from the 1,172 human heavy and 668 human κ chains available in the Kabat database. Statistical analysis of words of 17 fragments was performed (fragments that comprise the complementary determining regions′ fragments will not be discussed in this paper). The number of different words (those with different residues in at least one position) ranged, for various fragments, from 11 to 75 in the κ chains, and from 23 to 189 in the heavy chains. The main result of this study is that very few keywords, or main patterns of words, were necessary to describe over 90% of the sequences (no more than two keywords per fragment in the κ and no more than five per fragment in the heavy chains). No identical keywords were found for different fragments of the variable domains. Keywords of aligned fragments of the VH and Vκ domains were different in all but two instances. Thus, knowing the keywords, one can determine whether any given small part of a sequence belongs to a heavy or κ chain and predict its precise localization in the sequence. In addition, by using all of the keywords obtained through analysis of the Kabat database, it was possible to describe completely the sequences of the human VH and Vκ germ-line segments.

Constitution and laws of the International Printing Pressmen and Assistants' Union of North America.

Description based on: 1924.

Pressroom hints and helps : describing some practical methods of pressroom work, with directions and useful information relating to a variety of printing-press problems /

"Supplementary reading": p. 64.

Barriers and facilitators to cooking from 'scratch' using basic or raw ingredients: A qualitative interview study

Background: Previous research has highlighted an ambiguity in understanding cooking related terminology and a number of barriers and facilitators to home meal preparation. However, meals prepared in the home still include convenience products (typically high in sugars, fats and sodium) which can have negative effects on health. Therefore, this study aimed to qualitatively explore: (1) how individuals define cooking from ‘scratch’, and (2) their barriers and facilitators to cooking with basic ingredients.
Methods: 27 semi-structured interviews were conducted with participants (aged 18-58 years) living on the island of Ireland, eliciting definitions of ‘cooking from scratch’ and exploring the reasons participants cook in a particular way. The interviews were professionally transcribed verbatim and Nvivo 10 was used for an inductive thematic analysis.
Results: Our results highlighted that although cooking from ‘scratch’ lacks a single definition, participants viewed it as optimal cooking. Barriers to cooking with raw ingredients included: 1) time pressures; (2) desire to save money; (3) desire for effortless meals; (4) family food preferences; and (5) effect of kitchen disasters. Facilitators included: 1) desire to eat for health and well-being; (2) creative inspiration; (3) ability to plan and prepare meals ahead of time; and (4) greater self-efficacy in one’s cooking ability.
Conclusions: Our findings contribute to understanding how individuals define cooking from ‘scratch’, and barriers and facilitators to cooking with raw ingredients. Interventions should focus on practical sessions to increase cooking self-efficacy; highlight the importance of planning ahead and teach methods such as batch cooking and freezing to facilitate cooking from scratch.

Temporary teams learning and performance: the case of 3D printing technology in orthopaedic surgery

This dissertation contributes to the scholarly debate on temporary teams by exploring team interactions and boundaries.The fundamental challenge in temporary teams originates from temporary participation in the teams. First, as participants join the team for a short period of time, there is not enough time to build trust, share understanding, and have effective interactions. Consequently, team outputs and practices built on team interactions become vulnerable. Secondly, as team participants move on and off the teams, teams’ boundaries become blurred over time. It leads to uncertainty among team participants and leaders about who is/is not identified as a team member causing collective disagreement within the team. Focusing on the above mentioned challenges, we conducted this research in healthcare organisations since the use of temporary teams in healthcare and hospital setting is prevalent. In particular, we focused on orthopaedic teams that provide personalised treatments for patients using 3D printing technology. Qualitative and quantitative data were collected using interviews, observations, questionnaires and archival data at Rizzoli Orthopaedic Institute, Bologna, Italy. This study provides the following research outputs. The first is a conceptual study that explores temporary teams’ literature using bibliometric analysis and systematic literature review to highlight research gaps. The second paper qualitatively studies temporary relationships within the teams by collecting data using group interviews and observations. The results highlighted the role of short-term dyadic relationships as a ground to share and transfer knowledge at the team level. Moreover, hierarchical structure of the teams facilitates knowledge sharing by supporting dyadic relationships within and beyond the team meetings. The third paper investigates impact of blurred boundaries on temporary teams’ performance. Using quantitative data collected through questionnaires and archival data, we concluded that boundary blurring in terms of fluidity, overlap and dispersion differently impacts team performance at high and low levels of task complexity.

Carotenóides: propriedades, aplicações e biotransformação para formação de compostos de aroma

Carotenoids are widely distributed in nature, providing yellow, orange or red color in a great number of vegetables, microorganisms and in some animals. Carotenoids act as biological antioxidants and seem to play an important role in human health by protecting cells and tissues from the damaging effects of free radicals and singlet oxygen. Several authors describe the oxidative cleavage of carotenoids in flavor compounds as occuring through chemical or photochemical degradations or through biotechnological processes. Biotransformation of carotenoids seems to be a reasonable alternative to produce flavor compounds since these compounds are considered 'natural' ingredients. In this work we describe the properties of some carotenoids, as well as biotechnological approaches to obtain its oxyfunctionalized derivatives.

Residual stresses in TiN, DLC and MoS(2) coated surfaces with regard to their tribological fracture behaviour

Thin hard coatings on components and tools are used increasingly due to the rapid development in deposition techniques, tribological performance and application skills. The residual stresses in a coated surface are crucial for its tribological performance. Compressive residual stresses in PVD deposited TiN and DLC coatings were measured to be in the range of 0.03-4 GPa on steel substrate and 0.1-1.3 GPa on silicon. MoS(2) coatings had tensional stresses in the range of 0.8-1.3 on steel and 0.16 GPa compressive stresses on silicon. The fracture pattern of coatings deposited on steel substrate were analysed both in bend testing and scratch testing. A micro-scale finite element method (FEM) modelling and stress simulation of a 2 mu m TiN-coated steel surface was carried out and showed a reduction of the generated tensile buckling stresses in front of the sliding tip when compressive residual stresses of 1 GPa were included in the model. However, this reduction is not similarly observed in the scratch groove behind the tip, possibly due to sliding contact-induced stress relaxation. Scratch and bending tests allowed calculation of the fracture toughness of the three coated surfaces, based on both empirical crack pattern observations and FEM stress calculation, which resulted in highest values for TiN coating followed by MoS(2) and DLC coatings, being K(C) = 4-11, about 2, and 1-2 MPa M(1/2), respectively. Higher compressive residual stresses in the coating and higher elastic modulus of the coating correlated to increased fracture toughness of the coated surface. (C) 2009 Elsevier B.V. All rights reserved.

Affected and non-affected skin fibroblasts from systemic sclerosis patients share a gene expression profile deviated from the one observed in healthy individuals

Objectives To evaluate the gene expression profile of fibroblasts from affected and non-affected skin of systemic sclerosis (SSc) patients and from controls. Materials and methods Labeled cDNA from fibroblast cultures from forearm (affected) and axillary (non-affected) skin from six diffuse SSc patients, from three normal controls, and from MOLT-4/HEp-2/normal fibroblasts (reference pool) was probed in microarrays generated with 4193 human cDNAs from the IMAGE Consortium. Microarray images were converted into numerical data and gene expression was calculated as the ratio between fibroblast cDNA (Cy5) and reference pool cDNA (Cy3) data and analyzed by R environment/Aroma, Cluster, Tree View, and SAM softwares. Differential expression was confirmed by real time PCR for a set of selected genes. Results Eighty-eight genes were up- and 241 genes down-regulated in SSc fibroblasts. Gene expression correlation was strong between affected and non-affected fibroblast samples from the same patient (r>0.8), moderate among fibroblasts from all patients (r=0.72) and among fibroblasts from all controls (r=0.70), and modest among fibroblasts from patients and controls (r=0.55). The differential expression was confirmed by real time PCR for all selected genes. Conclusions Fibroblasts from affected and non-affected skin of SSc patients shared a similar abnormal gene expression profile, suggesting that the widespread molecular disturbance in SSc fibroblasts is more sensitive than histological and clinical alterations. Novel molecular elements potentially involved in SSc pathogenesis were identified.

Ensinar ciências a alunos com incapacidade intelectual recorrendo ao software Scratch: um estudo de caso

Este estudo procura a valorização do ensino dirigido a alunos com Incapacidade Intelectual. Tem como objetivos conceber um recurso didático, integrando as ferramentas do Scratch, para alunos com Incapacidade Intelectual; averiguar a exequibilidade do uso desse recurso em ambiente natural de ensino e promover o envolvimento de alunos com Incapacidade Intelectual na realização de tarefas propostas na disciplina de Ciências da Natureza. Pretendemos dar resposta às seguintes questões de investigação: (1) A utilização do Scratch é adequada e exequível no trabalho quotidiano de alunos com Incapacidade Intelectual? (2) Em que medida o Scratch pode contribuir para um melhor envolvimento dos alunos com Incapacidade Intelectual na realização das tarefas propostas? Para este efeito, planificamos duas aulas. Na primeira, abordou-se o conteúdo a tratar – Poluição – e na segunda aula utilizou-se o Scratch, desafiando os alunos a desenvolverem diversas tarefas de forma mais ativa. O presente estudo segue uma abordagem metodológica de natureza qualitativa, centrando-se num estudo de caso, onde se aborda a importância do uso das Tecnologias de Informação e Comunicação, mais concretamente o software educativo Scratch, como sendo uma ferramenta potenciadora do envolvimento dos alunos. Este estudo foi aplicado a três alunos com Incapacidade Intelectual que tinham sido atribuídos à docente investigadora no presente ano letivo. Os dados foram recolhidos através da análise dos Programas Educativos Individuais dos alunos participantes; da entrevista realizada à docente de Educação Especial; de gravações áudio, de fotografias, de trabalhos realizados pelos alunos participantes e de notas de campo da investigadora. Foi centralidade do estudo a conceção de uma proposta didática e o desenvolvimento dos respetivos recursos, utilizando o software educativo Scratch. Quer a proposta didática quer os recursos a ela associados constituem em si mesmo parte dos resultados do trabalho desenvolvido. Os dados obtidos neste estudo permitem sustentar a ideia de que é possível trabalhar com alunos com Necessidades Educativas Especiais, nomeadamente Incapacidade Intelectual, recorrendo ao software educativo Scratch e que o uso desta ferramenta proporcionou um maior envolvimento e autonomia dos alunos nas tarefas propostas.

Inkjet printing technology for flexible pressure sensors

Tese de Doutoramento Ciência e Engenharia de Polímeros e Compósitos.

Market Competition and Lower Tier Incentives

The relationship between competition and performance-related pay has been analysed in single-principal-single-agent models. While this approach yields good predictions for managerial pay schemes, the predictions fail to apply for employees at lower tiers of a firm's hierarchy. In this paper, a principal-multi-agent model of incentive pay is developed which makes it possible to analyze the effect of changes in the competitiveness of markets on lower tier incentive payment schemes. The results explain why the payment schemes of agents located at low and mid tiers are less sensitive to changes in competition when aggregated firm data is used. JEL classification numbers: D82, J21, L13, L22. Keywords: Cournot competition, Contract delegation, Moral hazard, Entry, Market size, Wage cost.

Market Competition and Lower Tier Incentives

The relationship between competition and performance-related pay has been analyzed in single-principal-single-agent models. While this approach yields good predictions for managerial pay schemes, the predictions fail to apply for employees at lower tiers of a firm's hierarchy. In this paper, a principal-multi-agent model of incentive pay is developed which makes it possible to analyze the effect of changes in the competitiveness of markets on lower tier incentive payment schemes. The results explain why the payment schemes of agents located at low and mid tiers are less sensitive to changes in competition when aggregated firm data is used. Journal of Economic Literature classiffication numbers: D82, J21, L13, L22. Keywords: Cournot Competition, Contract Delegation, Moral Hazard, Entry, Market Size, Wage Cost.

Decentralization and the Welfare State: What Do Citizens Perceive?

Trust in public institutions and public policies are generally perceived as a precondition for economic recovery in times of recession. Recent empirical evidence tends to find a positive link between decentralization and trust. But our knowledge about whether decentralization – through increased trust – improves the perception of the delivery and effectiveness of public policies is still limited. In this paper we estimate the impact of fiscal and political decentralization on the perception of the state of the education system and of health services, by using the 2002, 2004, 2006 and 2008 waves of the European social survey. The analysis of the views of 160,000 individuals in 31 European countries indicates that while the effect of fiscal decentralization on the perception of the state of the health and education system is limited, political decentralization clearly affects citizen’s satisfaction with education and health delivery. The influence of political decentralization, however, is highly contingent on whether we consider the capacity of the local or regional government to exercise authority over its citizens (self-rule) or to influence policy at the national level (shared-rule). Keywords: Education, health, satisfaction, fiscal and political decentralization, Europe. JEL codes: H11, H77