Stimulus determinants and receptor mechanisms involved in the tactual perception of woollen fabrics

The dimensions of touch sensations were investigated in a series of human psychophysical experiments using woollen fabrics as stimuli and words from the textile industry literature as verbal descriptors of touch sensations. Roughness was shown to be an important dimension and was found to be encoded by two out of the four receptors in the skin that respond to specific frequencies of mechanical vibration.

Functional fabrics with controlled wettability

In this study, fabrics with novel super water-repellent and unidirectional water-transfer functions have been prepared using one-step wet-chemical coating processes. The mechanism of directional water transport across the fabrics having gradient superhydrophobicity to hydrophilicity has been elucidated.

Super water repellent fabrics produced by silica nanoparticle-containing coating

In this paper, we report on superhydrophobic fabrics (polyester, wool and cotton) produced by a wet-chemical coating technique. The coating solutions were synthesized by the co-hydrolysis of two silane precursors, tetraethyl orthosilicate (TEOS) and an alkylsilane, in an alkaline condition. Without any purification, the as-hydrolyzed solutions were directly used to treat fabrics, and the treated fabrics had water contact angles (CA) as high as 170º and sliding angles (SA) as low as 5º. Three alkylsilanes have been used for the synthesis of the coating solutions, and all contain three hydrolysable alkoxyl groups and one non-hydrolysable alkyl, but with different chain lengths (C1, C8 and C16). It was found that the CA value increased with an increase in the alkyl chain length, while the SA showed a reverse trend. When the functional group had a C16 alkyl, the treated fabric surfaces were highly superhydrophobic, with the CA not being affected much by the fabric type, while the SA values were slightly affected by the original wettability of the fabric substrates. The superhydrophobic feature was attributed to a highly rough surface formed by the particulate coating. Aside from the superhydrophobicity, the influence of the coating on the fabric softness was also examined.

Objective pilling evaluation of nonwoven fabrics

A pilled nonwoven fabric image consists of brightness variations caused by high frequency noise, randomly distributed fibers, fuzz and pills, fabric surface unevenness, and background illumination variance. They have different frequency and space distributions and thus can be separated by the two-dimensional dual-tree complex wavelet transform reconstructed detail and approximation images. The energies of the six direction detail sub-images, which capture brightness variation caused by fuzz and pills of different sizes, quantitatively characterize the pilling volume distribution at different directions and scales. They are used as pilling features and inputs of neural network supervised classifier. The initial results based on a nonwoven wool fabric standard pilling test image set, the Woolmark®‚ SM 50 Blanket set, suggest that this objective pilling evaluation method developed by the combination of pilling identification, characterization method and neural network supervised classifier is feasible.

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

Directional water-transfer through fabrics induced by asymmetric wettability

Fabrics having an interesting unidirectional water-transfer effect have been prepared by a special coating technique to create a wettability gradient across the fabric thickness, and the treated fabrics also show considerably different breakthrough pressures on the two fabric sides.

A correlation study of subjective sensorial evaluation and objective softness measurement of wool fabrics

Comfort is one of the most important aspects of clothing, especially for next-to-skin garments such as shirts and trousers for summer. Sensorial comfort has a strong relationship with both the mechanical and surface properties of apparel fabric. A comfortable textile material should have properties of softness, smooth surface or texture, be pleasant to touch and very flexible. When assessing fabric handle subjectively, the assessor usually strokes the fabric surface with one or several fingers and squash the fabric gently in hand. Thus, the perception of such handle includes complex parameters of compression, tactile sensation and textural effect. In this work, we attempted to use a simple technique of objectively evaluating fabric softness related properties, by measuring the force required to pull a fabric strip through a series of parallel pins (the pulling force). We also subjectively rated the fabric handle. The correlation analysis showed very good agreement between the fabric pulling force and subjective hand rating.

Photochromic fabrics from hybrid silica surface coatings

In this study, hybrid silica prepared by a sol-gel technique and doped with a photochromic dye was used to produce photochromic coatings on fabric surfaces. The coated fabrics showed a strong photochromic effect with very fast optical response speed. Good coating adhesion was obtained on wool fabrics. The photostability of the photochromic fabrics was improved by three different processes: adding a photo stabilizer, adjusting the surface wettability and sealing off the dye-containing pores with additional silica coating. Four UV stabilizers were added separately to the photochromic silica coatings to investigate their influence on the photostability and photochromic behaviour. The addition of UV stabilizers retarded the photochromic response and reduced photochromic absorption, but increased photochromic lifetime. Among the four UV stabilizers studied, the quencher resulted in the best improvement to the photostability with minimal reduction in the photochromic absorption. Increasing the hydrophobicity of the coating, and sealing-off the dye-containing pores were also found to improve photostability.

A study on the photostability of photochromic fabrics from hybrid organosilica coatings

Photochromic fabrics were prepared using a coating solution containing photochromic dyes and silica sol-gel. The photochromic effect was rapid. The effect of three different post treatments on the optical and durability of the photochromic fabrics was evaluated. These included incorporating a UV stabilizer, increasing the surface hydrophobicity by fluorinating the pores, and blockading the dye-containing pores with additional silica coating. All the treatments improved photostability, without significantly affecting response/fading speeds.

Directional water-transport fabrics achieved by wettablity gradient from superhydrophobicity to hydrophilicity

In this study, we demonstrate that fabrics having a wettability gradient from superhydrophobic to hydrophilic through the thickness direction show a novel directional water transfer effect: water can transfer only from the superhydrophobic to the hydrophilic side, but not in the opposite direction unless an external force is applied. A sol-gel technology was used to prepare a superhydrophobic coating on fabrics, and the coated fabrics showed water contact-angle as high as 165°. When the coated fabric was subjected to a photochemistry treatment from one fabric side, the irradiated surface turned hydrophilic permanently, while the back side still maintained the superhydrophobicity. The treated fabric can transfer water droplet rapidly from hydrophobic to hydrophilic side, and the pressure allowing water breakthrough the fabric is different considerably between the two fabric sides. The directional water transfer effect is also affected by the wettability gradient. Such a directional water transfer coating may be useful to develop new functional fabrics for defence applications.

Unidirectional water transfer effect from fabrics having a superhydrophobic-to-hydrophillic gradient

In this study, we demonstrate that fabrics having a wettability gradient from superhydrophobic to hydrophilic through the thickness direction show a novel directional water transfer effect: water can transfer from the superhydrophobic to the hydrophilic side, but not in the opposite direction unless an external force is applied. A sol-gel technology was used to prepare a nano-structured superhydrophobic coating on fabrics, and the coated fabrics showed water contact-angle as high as 165 degrees. When the coated fabric was subjected to a photochemistry treatment from one fabric side, the irradiated surface turned hydrophilic permanently, while the back side still maintained the superhydrophobicity. The treated fabric can transfer water droplet rapidly from hydrophobic to hydrophilic side, and the pressure allowing water breakthrough the fabric are different considerably between the two fabric sides. The directional water transfer effect is affected by the wettability gradient. Such a directional water transfer coating may be useful to develop new functional fabrics for defence applications.

Optimization of polymerization conditions and thermal degradation of conducting polypyrrole coated polyester fabrics

PET fabric is coated with conducting polypyrrole (PPy) by oxidative polymerization from an aqueous solution of Py using ferric chloride hexahydrate (FeCl3) as oxidant and p-toluene sulphonate (pTSA) as dopant. The optimum concentrations for Py, FeCl3 and pTSA were found to be 0.11, 0.857 and 0.077 mol/l respectively, which yielded a conductive fabrics with resistivity as low as 72 Ω/sq. PPy fabric gained resistivity less than one order of magnitude when aged for 18 months at room temperature. The stabilizing effect of the dopant pTSA against thermal degradation was demonstrated; the undoped samples reached resistivity of around 40 kΩ, whereas doped samples reached less than 2 kΩ at the same temperature and time.

The effect of humidity and temperature on Wool Comfort Meter assessment of single jersey wool fabrics

The Wool ComfortMeter provides an objective measurement of the fabric-evoked prickle discomfort rating provided by wearers. This work aimed to quantify the sensitivity of the Wool ComfortMeter over a range of different temperature and humidity conditions to determine the recommended test conditions for its operation. The design was: three temperatures (notionally 20, 25 and 30°C) at three relative humidities (RHs, notionally 50, 65 and 80%) each with two replicates, using six different wool single jersey knits (mean fibre diameter 19.5–27.0 µm). As it was difficult to achieve exactly some of the extreme combinations of temperature and RH, some combinations were repeated, providing a total of 23 different assessment conditions. Data were analysed using restricted maximum likelihood mixed model analysis. The best fixed model included RH, RH2, temperature and the interaction of temperature and RH, accounting for 95% of the variation in Wool ComfortMeter readings. Wool ComfortMeter values were almost constant at 55–60% RH. Generally, the Wool ComfortMeter value reduced with increasing RH > 60% at temperatures of 25°C and 28.5°C as the regain of the fabric increased. However, at 20°C little change was detected as RH was increased from 50 to 80% as there were only small changes in fabric regain. The observed effects were in a good agreement with existing knowledge on the effect of regain on the mechanical properties of wool fibre. Wool ComfortMeter is best operated under standard conditions for textile testing of 65% RH and 20°C.

Production and applications of multi-layer 3D fabrics

In this paper, 3D textile structures, their types and applications have been discussed. Woven structures especially multi-layer woven structures are discussed in detail. A simple and quick method to produce 3D textile woven preforms on conventional looms is also given at the end of this paper. 3D textile fabrics give composite structures weight reduction with improved mechanical properties in comparison to traditionally used materials.