Die Prozessierung des humanen Amyloid-Vorläuferproteins im Verlauf der replikativen Seneszenz

Die Alterung stellt den größten Risikofaktor für die Entwicklung der Alzheimer Krankheit dar, wobei die biochemische Basis dieser Korrelation bisher nicht bekannt ist. Ein möglicherweise zentraler Mechanismus der Alzheimer Pathologie wird durch die Prozessierung von APP repräsentiert, die in der Synthese von Aβ resultiert. Der Einfluss zellulärer Alterung auf die Biochemie der APP-Prozessierung ist bislang weitestgehend ungeklärt. In der vorliegenden Arbeit wurde gezeigt, dass die Prozessierung von endogenem APP im Verlauf der Zellalterung humaner Fibroblasten progressiv verringert wird. Die Bildung der intrazellulären APP-Spaltfragmente (C99, C83 und AICD) nahm mit zunehmender Lebensspanne ab und war gleichfalls mit einer reduzierten Synthese von extrazellulären APP-Fragmenten (sAPP, sAPPα) verbunden. Weiterhin wurde nachgewiesen, dass die Reifung von APP in seneszenten Zellen selektiv reduziert war, und dass dies durch altersabhängig erhöhte zelluläre Cholesterolspiegel vermittelt wurde. Von den APP-prozessierenden Sekretasen waren die Proteinspiegel von Presenilin-1 und Nicastrin, beides Komponenten der γ-Sekretase, im Verlauf der Zellalterung graduell verringert. Dies hatte einen progressiven Rückgang der enzymatischen Aktivität der γ-Sekretase zur Folge, wodurch die Prozessierung von APP unmittelbar reduziert wurde. Die Proteinspiegel von ADAM10, einer α-Sekretase, sowie der β-Sekretase, BACE, wiesen keine Altersregulation auf, aber interessanterweise wurde eine erhöhte enzymatische Aktivität der β-Sekretase in seneszenten Zellen nachgewiesen. Die γ-Sekretase sowie BACE sind in Lipid Rafts lokalisiert, geordneten Membransubdomänen, die hohe Cholesterol- und Caveolin-1-Spiegel aufweisen. Obwohl das Gesamtniveau dieser strukturellen Komponenten von Lipid Rafts in seneszenten Zellen erhöht war, war die Assoziation beider Moleküle mit Lipid Rafts reduziert und sie akkumulierten in speziellen Organellen, die höchstwahrscheinlich Lipidkörper darstellen. Somit wurde gezeigt, dass Lipid Rafts im Zuge der Zellalterung disintegrieren beziehungsweise in ihrem Gesamtspiegel reduziert waren. Diese altersabhängige Membranmodifikation war mit einer veränderten Verteilung von Presenilin-1 und BACE zwischen der Lipid Raft und der Nicht Raft Fraktion der Membran verbunden, die möglicherweise das Potential dieser Enzyme zur Prozessierung von APP reduzierte. In einem zweiten Teil der Arbeit wurden transgene C. elegans konstruiert, die humanes APP exprimieren, das C-terminal an GFP gekoppelt war. Diese Würmer wiesen eine reduzierte Fertilität, Eilegedefekte und eine verzögerte post-embryonale Entwicklung auf, die möglicherweise auf eine Transgen-vermittelte Neurodegeneration zurückgeführt werden können. Durch erste Untersuchungen der Prozessierung des Transgens konnten Spaltfragmente nachgewiesen werden, die potentiell auf eine spezifische Spaltung von APP durch die endogenen Sekretasen schließen lassen. Somit werden die Prozessierung sowie die Reifung von APP durch die altersabhängige Modifikationen zellulärer Biochemie nachhaltig beeinflusst. Zukünftige Studien sollen zeigen, ob sich diese zellulären Zusammenhänge in den Gesamtorganismus C. elegans übertragen lassen. Des Weiteren sollen die altersabhängigen zellulären Veränderungen, insbesondere des Cholesterol-Metabolismus und der Sekretaseaktivitäten, weitergehend analysiert werden, um zusätzliche Erkenntnisse über altersassoziierte Regulationen möglicher therapeutischer Ziele der Alzheimer Erkrankung zu gewinnen.

Studio del comportamento flesso-torsionale di un telaio in materiale composito per vettura sportiva

Lo studio svolto in merito alle tecniche di produzione di componenti strutturali in materiale composito ha permesso il raggiungimento di una precisa consapevolezza dello stato dell’arte del settore, in particolare in riferimento ai processi attualmente utilizzati per l’industrializzazione in media-grande serie. Con l’obiettivo di sintetizzare i principali vantaggi delle tecnologie suddette e permettere la realizzazione di forme più complesse, si è proceduto all’analisi di fattibilità, attraverso uno studio funzionale e una prima progettazione di una tecnologia di produzione per nastratura automatizzata di componenti strutturali in materiale composito. Si è voluto quindi dimostrare la flessibilità e la consistenza del processo disegnando un telaio nastrato in carbonio, intercambiabile al telaio FSAE 2009 in tubolare d’acciaio (stessi punti di attacco motore, punti di attacco telaietto posteriore, attacchi sospensioni anteriori) e che garantisca un sostanziale vantaggio in termini di peso, a pari rigidezza torsionale. La caratterizzazione di tale telaio è stata eseguita mediante l'utilizzo del calcolo strutturale, validato da prove sperimentali.

Produzione automatizzata per nastratura di componenti strutturali in materiale composito

Questa dissertazione tratterà l’argomento dello studio di metodi di progettazione e processi tecnologici innovativi per l’industrializzazione in medio-grande serie di componenti strutturali in materiale composito. L’interesse della ricerca verso questo ambito è suscitato dai notevoli vantaggi che l’utilizzo di materiali dall’alto rapporto prestazioni meccaniche/peso danno nella ricerca di elevate prestazioni in applicazioni sportive e diminuzione dei consumi ed emissioni inquinanti in mezzi di trasporto di grande serie. Lo studio di componenti in materiale composito è caratterizzato dalla peculiarità di non poter disgiungere la progettazione della geometria della parte da quella del materiale e del processo, ed in questo senso nella figura del progettista si vanno a riassumere sinergicamente competenze riguardanti i tre ambiti. Lo scopo di questo lavoro è la proposizione di una metodologia di progettazione e produzione di componenti strutturali che permetta l’utilizzazione ottimale della natura fibrosa del materiale composito sia dal punto di vista del trasferimento dei carichi tra diversi componenti, sia dal punto di vista del processo di laminazione che avviene per nastratura automatizzata. Lo studio è volto a mostrare in quali termini tale tecnologia sia potenzialmente in grado di superare i vincoli di forma ed i limiti di efficienza meccanica delle giunzioni tra le parti e di garantire maggiore produttività e costi inferiori rispetti ai diversi metodi di produzione che rappresentano oggi lo stato dell’arte dell’industrializzazione in medio-grande serie. Particolare attenzione verrà posta sull’utilizzo della tecnologia oggetto di studio per la produzione di telai automobilistici.

Genexpressionsanalyse der fötalen Wachstumsfuge des Rindes

Erkrankungen des Skelettapparats wie beispielsweise die Osteoporose oder Arthrose gehören neben den Herz-Kreislauferkrankungen und Tumoren zu den Häufigsten Erkrankungen des Menschen. Ein besseres Verständnis der Bildung und des Erhalts von Knochen- oder Knorpelgewebe ist deshalb von besonderer Bedeutung. Viele bisherige Ansätze zur Identifizierung hierfür relevanter Gene, deren Produkte und Interaktionen beruhen auf der Untersuchung pathologischer Situationen. Daher ist die Funktion vieler Gene nur im Zusammenhang mit Krankheiten beschrieben. Untersuchungen, die die Genaktivität bei der Normalentwicklung von knochen- und knorpelbildenden Geweben zum Ziel haben, sind dagegen weit weniger oft durchgeführt worden. rnEines der entwicklungsphysiologisch interessantesten Gewebe ist die Epiphysenfuge der Röhrenknochen. In dieser sogenannten Wachstumsfuge ist insbesondere beim fötalen Gewebe eine sehr hohe Aktivität derjenigen Gene zu erwarten, die an der Knochen- und Knorpelbildung beteiligt sind. In der vorliegenden Arbeit wurde daher aus der Epiphysenfuge von Kälberknochen RNA isoliert und eine cDNA-Bibliothek konstruiert. Von dieser wurden ca. 4000 Klone im Rahmen eines klassischen EST-Projekts sequenziert. Durch die Analyse konnte ein ungefähr 900 Gene umfassendes Expressionsprofil erstellt werden und viele Transkripte für Komponenten der regulatorischen und strukturbildenden Bestandteile der Knochen- und Knorpelentwicklung identifiziert werden. Neben den typischen Genen für Komponenten der Knochenentwicklung sind auch deutlich Bestandteile für embryonale Entwicklungsprozesse vertreten. Zu ersten gehören in erster Linie die Kollagene, allen voran Kollagen II alpha 1, das mit Abstand höchst exprimierte Gen in der fötalen Wachstumsfuge. Nach den ribosomalen Proteinen stellen die Kollagene mit ca. 10 % aller auswertbaren Sequenzen die zweitgrößte Gengruppe im erstellten Expressionsprofil dar. Proteoglykane und andere niedrig exprimierte regulatorische Elemente, wie Transkriptionsfaktoren, konnten im EST-Projekt aufgrund der geringen Abdeckung nur in sehr geringer Kopienzahl gefunden werden. Allerdings förderte die EST-Analyse mehrere interessante, bisher nicht bekannte Transkripte zutage, die detaillierter untersucht wurden. Dazu gehören Transkripte die, die dem LOC618319 zugeordnet werden konnten. Neben den bisher beschriebenen drei Exonbereichen konnte ein weiteres Exon im 3‘-UTR identifiziert werden. Im abgeleiteten Protein, das mindestens 121 AS lang ist, wurden ein Signalpeptid und eine Transmembrandomäne nachgewiesen. In Verbindung mit einer möglichen Glykosylierung ist das Genprodukt in die Gruppe der Proteoglykane einzuordnen. Leicht abweichend von den typischen Strukturen knochen- und knorpelspezifischer Proteoglykane ist eine mögliche Funktion dieses Genprodukts bei der Interaktion mit Integrinen und der Zell-Zellinteraktion, aber auch bei der Signaltransduktion denkbar. rnDie EST-Sequenzierungen von ca. 4000 cDNA-Klonen können aber in der Regel nur einen Bruchteil der möglichen Transkripte des untersuchten Gewebes abdecken. Mit den neuen Sequenziertechnologien des „Next Generation Sequencing“ bestehen völlig neue Möglichkeiten, komplette Transkriptome mit sehr hoher Abdeckung zu sequenzieren und zu analysieren. Zur Unterstützung der EST-Daten und zur deutlichen Verbreiterung der Datenbasis wurde das Transkriptom der bovinen fötalen Wachstumsfuge sowohl mit Hilfe der Roche-454/FLX- als auch der Illumina-Solexa-Technologie sequenziert. Bei der Auswertung der ca. 40000 454- und 75 Millionen Illumina-Sequenzen wurden Verfahren zur allgemeinen Handhabung, der Qualitätskontrolle, dem „Clustern“, der Annotation und quantitativen Auswertung von großen Mengen an Sequenzdaten etabliert. Beim Vergleich der Hochdurchsatz Blast-Analysen im klassischen „Read-Count“-Ansatz mit dem erstellten EST-Expressionsprofil konnten gute Überstimmungen gezeigt werden. Abweichungen zwischen den einzelnen Methoden konnten nicht in allen Fällen methodisch erklärt werden. In einigen Fällen sind Korrelationen zwischen Transkriptlänge und „Read“-Verteilung zu erkennen. Obwohl schon simple Methoden wie die Normierung auf RPKM („reads per kilo base transkript per million mappable reads“) eine Verbesserung der Interpretation ermöglichen, konnten messtechnisch durch die Art der Sequenzierung bedingte systematische Fehler nicht immer ausgeräumt werden. Besonders wichtig ist daher die geeignete Normalisierung der Daten beim Vergleich verschieden generierter Datensätze. rnDie hier diskutierten Ergebnisse aus den verschiedenen Analysen zeigen die neuen Sequenziertechnologien als gute Ergänzung und potentiellen Ersatz für etablierte Methoden zur Genexpressionsanalyse.rn

Modelling the dynamic response of rockfall protection barriers

Mountainous areas are prone to natural hazards like rockfalls. Among the many countermeasures, rockfall protection barriers represent an effective solution to mitigate the risk. They are metallic structures designed to intercept rocks falling from unstable slopes, thus dissipating the energy deriving from the impact. This study aims at providing a better understanding of the response of several rockfall barrier types, through the development of rather sophisticated three-dimensional numerical finite elements models which take into account for the highly dynamic and non-linear conditions of such events. The models are built considering the actual geometrical and mechanical properties of real systems. Particular attention is given to the connecting details between the structural components and to their interactions. The importance of the work lies in being able to support a wide experimental activity with appropriate numerical modelling. The data of several full-scale tests carried out on barrier prototypes, as well as on their structural components, are combined with results of numerical simulations. Though the models are designed with relatively simple solutions in order to obtain a low computational cost of the simulations, they are able to reproduce with great accuracy the test results, thus validating the reliability of the numerical strategy proposed for the design of these structures. The developed models have shown to be readily applied to predict the barrier performance under different possible scenarios, by varying the initial configuration of the structures and/or of the impact conditions. Furthermore, the numerical models enable to optimize the design of these structures and to evaluate the benefit of possible solutions. Finally it is shown they can be also used as a valuable supporting tool for the operators within a rockfall risk assessment procedure, to gain crucial understanding of the performance of existing barriers in working conditions.

Targeting the conversion of ceramide to sphingosine 1-phosphate as a novel strategy for cancer therapy

Sphingolipids not only function as structural components of cell membranes but also act as signaling molecules to regulate fundamental cellular responses, such as cell death and differentiation, proliferation and certain types of inflammation. Particularly the cellular balance between ceramide and sphingosine 1-phosphate seems to be crucial for a cell's decision to either undergo apoptosis or proliferate, two events which are implicated in tumor development and growth. Whereas ceramide possesses proapoptotic capacity in many cell types, sphingosine 1-phosphate acts as a counterplayer able to induce cell proliferation and protect cells from undergoing apoptosis. Therefore, tipping the balance in favour of ceramide production, i.e. by inhibiting ceramidase or sphingosine kinase activities has potential to support its proapoptotic action and hence represents a promising rational approach to effective cancer therapy. This review highlights most recent data on the regulation of cellular sphingolipid formation and their potential implication in tumor development, and provides perspectives for their use as targets in molecular intervention therapy.

QSAR Studies on Thiazolidines: A Biologically Privileged Scaffold

A large number of drugs and biologically relevant molecules contain heterocyclic systems. Often the presence of hetero atoms or groupings imparts preferential specificities in their biological responses. Amongst the heterocyclic systems, thiazolidine is a biologically important scaffold known to be associated with several biological activities. Some of the prominent biological responses attributed to this skeleton are antiviral, antibacterial, antifungal, antihistaminic, hypoglycemic, anti-inflammatory activities. This diversity in the biological response profiles of thiazolidine has attracted the attention of many researchers to explore this skeleton to its multiple potential against several activities. Many of these synthetic and biological explorations have been subsequently analyzed in detailed quantitative structure-activity relationship (QSAR) studies to correlate the respective structural features and physicochemical properties with the activities to identify the important structural components in deciding their activity behavior. In this, drugs or any biologically active molecules may be viewed as structural frames consisting of strategically positioned functional groups that will interact effectively with the complementary groups/sites of the receptor. With this in focus, the present article reviews the QSAR studies of diverse biological activities of the thiazolidines published during the past decade.

Immuno-detection of anthrose containing tetrasaccharide in the exosporium of Bacillus anthracis and Bacillus cereus strains

AIMS: Bacillus anthracis strains of various origins were analysed with the view to describe intrinsic and persistent structural components of the Bacillus collagen-like protein of anthracis glycoprotein associated anthrose containing tetrasaccharide in the exosporium. METHODS AND RESULTS: The tetrasaccharide consists of three rhamnose residues and an unique monosaccharide--anthrose. As anthrose was not found in spores of related strains of bacteria, we envisioned the detection of B. anthracis spores based on antibodies against anthrose-containing polysaccharides. Carbohydrate-protein conjugates containing the synthetic tetrasaccharide, an anthrose-rhamnose disaccharide or anthrose alone were employed to immunize mice. All three formulations were immunogenic and elicited IgG responses with different fine specificities. All sera and monoclonal antibodies derived from tetrasaccharide immunized mice cross-reacted not only with spore lysates of a panel of virulent B. anthracis strains, but also with some of the B. cereus strains tested. CONCLUSIONS: Our results demonstrate that antibodies to synthetic carbohydrates are useful tools for epitope analyses of complex carbohydrate antigens and for the detection of particular target structures in biological specimens. SIGNIFICANCE AND IMPACT OF THE STUDY: Although not strictly specific for B. anthracis spores, antibodies against the tetrasaccharide may have potential as immuno-capturing components for a highly sensitive spore detection system.

Redistribution of plasma membrane phosphatidylserine during erythroid development

Phosphatidylserine (PS) is not only one of the structural components of the plasma membrane, it also plays an important role in blood coagulation, and cell-cell interactions during aging and apoptosis.^ Here we studied some alterations that occur in membrane phosphatidylserine asymmetry during erythroid differentiation-associated apoptosis and erythrocyte aging and characterized some aspects in the regulation of PS asymmetry.^ Erythroleukemia cells, frequently used to study erythroid development, undergo apoptosis when induced to differentiate along the erythroid lineage. In the case of K562 cells induced to differentiate with hemin, this event is characterized by DNA fragmentation that correlates with downregulation of the survival protein BCL-xL and ultimately the result is cell death. We showed here that reorientation of PS from the inner-to-outer plasma membrane leaflet and inhibition of the aminophospholipid translocase are also events observed upon hemin treatment. We observed that constitutive expression of BCL-2 did not inhibit the alterations caused by hemin in membrane lipid asymmetry and only slightly prevented hemin-induced DNA fragmentation. On the other hand, BCL-2 effectively inhibited actinomycin D and staurosporine-induced DNA fragmentation and the appearance of PS at the outer leaflet of these cells. z.VAD.fmk, a widely used caspases inhibitor, blocked DNA fragmentation induced by both hemin and actinomycin D but only inhibited PS externalization in cells treated with actinomycin D.^ These results showed that PS externalization occurs during differentiation-related apoptosis. Unlike the pharmacologically-induced event, however, hemin-induced PS redistribution seems to be regulated by a mechanism independent of BCL-2 and caspases.^ Membrane PS is externalized not only during apoptosis but also during red blood cell senescence. To study this event, we artificially induced cellular aging by in vitro storage or vesiculation in the presence of the amphipathic lipid dilauroylphosphatidylcholine. These cells were monitored for age-dependent changes in cell density by Percoll gradient centrifugation and assessed for alterations in membrane lipid asymmetry and their ability to be cleared in vivo. These experiments demonstrated a progressive increase in red cell density upon vesiculation and in vitro aging. The clearance rate of cells obtained after vesiculation, was biphasic in nature, showing a very rapid component together with a second component consistent with the clearance rates of control populations. Quantitation of PS in the outer leaflet of red cells revealed that membrane redistribution of PS occurred upon in vitro storage and vesiculation. Inhibition of the aminophospholipid translocase with the sulfhydryl-oxidant reagent pyridyldithioethylamine resulted in higher PS externalization and enhanced clearance of vesiculated RBC.^ These observations not only suggest that vesiculation may be the mechanism responsible for some of the characteristic changes in cell density and PS asymmetry that occur upon cell aging, but also confirm the role of PS in the recognition and clearance of senescent cells. ^

Raw as Archival Still Image Format: A Consideration

Source materials like fine art, over-sized, fragile maps, and delicate artifacts have traditionally been digitally converted through the use of controlled lighting and high resolution scanners and camera backs. In addition the capture of items such as general and special collections bound monographs has recently grown both through consortial efforts like the Internet Archive's Open Content Alliance and locally at the individual institution level. These projects, in turn, have introduced increasingly higher resolution consumer-grade digital single lens reflex cameras or "DSLRs" as a significant part of the general cultural heritage digital conversion workflow. Central to the authors' discussion is the fact that both camera backs and DSLRs commonly share the ability to capture native raw file formats. Because these formats include such advantages as access to an image's raw mosaic sensor data within their architecture, many institutions choose raw for initial capture due to its high bit-level and unprocessed nature. However to date these same raw formats, so important to many at the point of capture, have yet to be considered "archival" within most published still imaging standards, if they are considered at all. Throughout many workflows raw files are deleted and thrown away after more traditionally "archival" uncompressed TIFF or JPEG 2000 files have been derived downstream from their raw source formats [1][2]. As a result, the authors examine the nature of raw anew and consider the basic questions, Should raw files be retained? What might their role be? Might they in fact form a new archival format space? Included in the discussion is a survey of assorted raw file types and their attributes. Also addressed are various sustainability issues as they pertain to archival formats with a special emphasis on both raw's positive and negative characteristics as they apply to archival practices. Current common archival workflows versus possible raw-based ones are investigated as well. These comparisons are noted in the context of each approach's differing levels of usable captured image data, various preservation virtues, and the divergent ideas of strictly fixed renditions versus the potential for improved renditions over time. Special attention is given to the DNG raw format through a detailed inspection of a number of its various structural components and the roles that they play in the format's latest specification. Finally an evaluation is drawn of both proprietary raw formats in general and DNG in particular as possible alternative archival formats for still imaging.

Genome profiling of sterol synthesis shows convergent evolution in parasites and guides chemotherapeutic attack

Sterols are an essential class of lipids in eukaryotes, where they serve as structural components of membranes and play important roles as signaling molecules. Sterols are also of high pharmacological significance: cholesterol-lowering drugs are blockbusters in human health, and inhibitors of ergosterol biosynthesis are widely used as antifungals. Inhibitors of ergosterol synthesis are also being developed for Chagas's disease, caused by Trypanosoma cruzi. Here we develop an in silico pipeline to globally evaluate sterol metabolism and perform comparative genomics. We generate a library of hidden Markov model-based profiles for 42 sterol biosynthetic enzymes, which allows expressing the genomic makeup of a given species as a numerical vector. Hierarchical clustering of these vectors functionally groups eukaryote proteomes and reveals convergent evolution, in particular metabolic reduction in obligate endoparasites. We experimentally explore sterol metabolism by testing a set of sterol biosynthesis inhibitors against trypanosomatids, Plasmodium falciparum, Giardia, and mammalian cells, and by quantifying the expression levels of sterol biosynthetic genes during the different life stages of T. cruzi and Trypanosoma brucei. The phenotypic data correlate with genomic makeup for simvastatin, which showed activity against trypanosomatids. Other findings, such as the activity of terbinafine against Giardia, are not in agreement with the genotypic profile.

Assessing Treatment Integrity: A Case Example

This paper presents an example of assessing treatment integrity as part of an experimental study of home-based, intensive family preservation services (IFPS). Participants were 103 IFPS workers and 24 state public child welfare agency workers (FC). The structured, self-report questionnaire included questions about specific components of the services, as well as the characteristics of the family and the workers themselves. Findings suggest that IFPS workers delivered services according to the treatment model guidelines. The procedure yielded a good estimate of whether the structural components of treatment were delivered according to the model as delineated in the treatment manual. The paper discusses the advantages and disadvantages of this approach to assessing treatment integrity.

Polonium-210 and Lead-210 activities measured on 9 water bottle profiles during POLARSTERN cruise ANT-XXIV/3

As part of the GEOTRACES Polarstern expedition ANT XXIV/3 (ZERO and DRAKE), Polonium-210 and Lead-210 have been measured in the water column and on suspended particulate matter in February to April 2008. Our goal was to resolve the affinities of 210Po and 210Pb to transparent exopolymer particles (TEP) and particulate organic carbon (POC). Polonium-210 and Lead-210 in the ocean can be used to identify the sources and sinks of suspended matter. In seawater, Polonium-210 (210Po) and Lead-210 (210Pb) are produced by stepwise radioactive decay of Uranium-238. 210Po (138 days half life) and 210Pb (22.3 years half life) have high affinities for suspended particles. Those radionuclides are present in dissolved form and adsorbed onto particles. Following adsorption onto particle surfaces, 210Po especially is transported into the interior of cells where it bonds to proteins. In this way, 210Po also accumulates in the food chain. 210Po is therefore considered to be a good tracer for POC, and traces particle export over a timescale of months. 210Pb (22.3 years half life) adsorbs preferably onto structural components of cells, biogenic silica and lithogenic particles, and is therefore a better tracer more rapidly sinking matter. Water samples were taken with Niskin bottles. Dissolved Polonium-210 and Lead-210 activities refer to the fraction < 1µm. Particulate Polonium-210 and Lead-210 refer to the activity on particles >1µm retained on nucleopore filters. Zooplankton retained on the filters was systematically removed as this study focused on phytoplankton and exudates. The data have been submitted to Pangaea following a Polonium-Lead intercalibration exercise organized by GEOTRACES, where the AWI lab results range within the data standard deviation from 10 participating labs.

Estudios de especiación de arsénico y acumulación de metales en muestras de interés medioambiental : Arsenic speciation and metal accumulation studies in environmental samples

Se ha estudiado la determinación de especies de arsénico y de contenidos totales de arsénico y metales pesados, específicamente cadmio, cromo, cobre, níquel, plomo y cinc, en muestras de interés medioambiental por su elevada capacidad acumuladora de metales, concretamente algas marinas comestibles y plantas terrestres procedentes de suelos contaminados por la actividad minera. La determinación de contenidos totales se ha llevado a cabo mediante espectrometría de emisión atómica con plasma de acoplamiento inductivo (ICP‐AES), así como por espectrometría de fluorescencia atómica con generación de hidruros (HG‐AFS), para bajos contenidos de arsénico. Las muestras fueron mineralizadas en medio ácido y calentamiento en horno de microondas. Los métodos fueron validados a través de su aplicación a materiales de referencia de matriz similar a la de las muestras, certificados en contenidos totales de los elementos seleccionados. Los resultados obtenidos mostraron su elevada capacidad de bioabsorción, especialmente en relación a los elevados contenidos de arsénico encontrados en algunas especies de algas pardas (Phaeophytas). En las plantas, se calcularon los factores de translocación, acumulación y biodisponibilidad de los elementos estudiados, permitiendo identificar a la especie Corrigiola telephiifolia como posible acumuladora de plomo e hiperacumuladora de arsénico. La determinación de especies de arsénico hidrosolubles en las muestras objeto de estudio, se llevó a cabo por cromatografía líquida de alta eficacia (HPLC) acoplado a ICP‐AES, HG‐ICP‐AES y HG‐AFS, incluyendo una etapa previa de foto‐oxidación. Los métodos desarrollados, mediante intercambio aniónico y catiónico, permitieron la diferenciación de hasta once especies de arsénico. Para el análisis de las muestras, fue necesaria la optimización de métodos de extracción, seleccionándose la extracción asistida por microondas (MAE) con agua desionizada. Asimismo, se realizaron estudios de estabilidad de arsénico total y de las especies hidrosolubles presentes en las algas, tanto sobre la muestra sólida como en sus extractos acuosos, evaluando las condiciones de almacenamiento adecuadas. En el caso de las plantas, la aplicación del diseño factorial de experimentos permitió optimizar el método de extracción y diferenciar entre las especies de arsénico presentes en forma de iones sencillos de mayor movilidad y el arsénico más fuertemente enlazado a componentes estructurales. Los resultados obtenidos permitieron identificar la presencia de arseniato (As(V)) y arsenito (As(III)) en las plantas, así como de ácido monometilarsónico (MMA) y óxido de trimetilarsina (TMAO) en algunas especies. En la mayoría de las algas se encontraron especies tóxicas, tanto mayoritarias (arseniato) como minoritarias (ácido dimetilarsínico (DMA)), así como hasta cuatro arsenoazúcares. Los resultados obtenidos y su estudio a través de la legislación vigente, mostraron la necesidad de desarrollar una reglamentación específica para el control de este tipo de alimentos. La determinación de especies de arsénico liposolubles en las muestras de algas se llevó a cabo mediante HPLC, en modo fase inversa, acoplado a espectrometría de masas con plasma de acoplamiento inductivo (ICP‐MS) y con ionización por electrospray (ESI‐MS), permitiendo la elucidación estructural de estos compuestos a través de la determinación de sus masas moleculares. Para ello, fue necesaria la puesta a punto de métodos extracción y purificación de los extractos. La metodología desarrollada permitió identificar hasta catorce especies de arsénico liposolubles en las algas, tres de ellas correspondientes a hidrocarburos que contienen arsénico, y once a arsenofosfolípidos, además de dos especies desconocidas. Las masas moleculares de las especies identificadas fueron confirmadas mediante cromatografía de gases acoplada a espectrometría de masas (GC‐MS) y espectrometría de masas de alta resolución (HR‐MS). ABSTRACT The determination of arsenic species and total arsenic and heavy metal contents (cadmium, chromium, cooper, nickel, lead and zinc) in environmental samples, with high metal accumulator capacity, has been studied. The samples studied were edible marine algae and terrestrial plants from soils polluted by mining activities. The determination of total element contents was performed by inductively coupled plasma atomic emission spectrometry (ICP‐AES), as well as by hydride generation atomic fluorescence spectrometry (HG‐AFS) for low arsenic contents. The samples studied were digested in an acidic medium by heating in a microwave oven. The digestion methods were validated against reference materials, with matrix similar to sample matrix and certified in total contents of the elements studied. The results showed the high biosorption capacity of the samples studied, especially regarding the high arsenic contents in some species of brown algae (Phaeophyta division). In terrestrial plants, the translocation, accumulation and bioavailability factors of the elements studied were calculated. Thus, the plant species Corrigiola telephiifolia was identified as possible lead accumulator and arsenic hyperaccumulator. The determination of water‐soluble arsenic species in the samples studied was carried out by high performance liquid chromatography (HPLC) coupled to ICP‐AES, HG‐ICP‐AES and HG‐AFS, including a prior photo‐oxidation step. The chromatographic methods developed, by anion and cation exchange, allowed us to differentiate up to eleven arsenic species. The sample analysis required the optimization of extraction methods, choosing the microwave assisted extraction (MAE) with deionized water. On the other hand, the stability of total arsenic and water‐soluble arsenic species in algae, both in the solid samples and in the water extracts, was studied, assessing the suitable storage conditions. In the case of plant samples, the application of a multivariate experimental design allowed us to optimize the extraction method and differentiate between the arsenic species present as simple ions of higher mobility and the arsenic more strongly bound to structural components. The presence of arsenite (As(III)) and arsenate (As(V)) was identified in plant samples, as well as monomethylarsonic acid (MMA) and trimethylarsine oxide (TMAO) in some cases. Regarding algae, toxic arsenic species were found in most of them, both As(V) and dimethylarsinic acid (DMA), as well as up to four arsenosugars. These results were discussed according to the current legislation, showing the need to develop specific regulations to control this kind of food products. The determination of lipid‐soluble arsenic species in alga samples was performed by reversed‐phase HPLC coupled to inductively coupled plasma and electrospray mass spectrometry (ICP‐MS and ESI‐MS), in order to establish the structure of these compounds by determining the corresponding molecular masses. For this purpose, it was necessary to develop an extraction method, as well as a clean‐up method of the extracts. The method developed permitted the identification of fourteen lipid‐soluble arsenic compounds in algae, corresponding to three arsenic‐hydrocarbons and eleven arsenosugarphospholipids, as well as two unknown compounds. Accurate mass measurements of the identified compounds were performed by gas chromatography coupled to mass spectrometry (GC‐MS) and high resolution mass spectrometry (HR‐MS).

Inelastic torsional seismic response of nominally symmetric reinforced concrete frame structures: shaking table tests

This paper discusses the torsional response of a scaled reinforced concrete frame structure subjected to several uniaxial shaking table tests. The tested structure is nominally symmetric in the direction of shaking and exhibits torsion attributable to non-uniform yielding of structural components and uncertainties in the building process. Asymmetric behavior is analyzed in terms of displacement, strain in reinforcing bars, energy dissipated at plastic hinges, and damage at section and frame levels. The results show that for low levels of seismic hazard, for which the structure is expected to perform basically within the elastic range, the accidental eccentricity is not a concern for the health of the structure, but it significantly increases the lateral displacement demand in the frames (about 30%) and this might cause significant damage to non-structural components. For high levels of seismic hazard the effects of accidental torsion become less important. These results underline the need to consider accidental eccentricity in evaluating the performance of a structure for very frequent or frequent earthquakes, and suggest that consideration of torsion may be neglected for performance levels associated with rare or very rare earthquakes.