Une vue globale du secteur ambulatoire: étude structurelle et fonctionnelle dans les cantons de Vaud et Fribourg. [A general view of the ambulatory care sector: Structural and functional study in the cantons of Vaud and Fribourg].

The project "Quantification and qualification of ambulatory health care", financed by the Swiss National Science Foundation and covering the Cantons of Vaud and Fribourg, has two main goals: --a structural study of the elements of the ambulatory care sector. This is done through inventories of the professions concerned (physicians, public health nurses, physiotherapists, pharmacists, medical laboratories), allowing to better characterize the "offer". This inventory work includes the collect and analysis of existing statistical data as well as surveys, by questionnaires sent (from September 1980) to the different professions and by interviews. --a functional study, inspired from the US National Ambulatory Medical Care Survey and from similar studies elsewhere, in order to investigate the modes of practice of various providers, with particular regard to interprofessional collaboration (through studying referrals from the ones to the others). The first months of the project have been used for a methodological research in this regard, centered on the use of systems analysis, and for the elaboration of adequate instruments.

Uncertainties in the prediction of spatial variability of soil CO2 emissions and related properties

The soil CO2 emission has high spatial variability because it depends strongly on soil properties. The purpose of this study was to (i) characterize the spatial variability of soil respiration and related properties, (ii) evaluate the accuracy of results of the ordinary kriging method and sequential Gaussian simulation, and (iii) evaluate the uncertainty in predicting the spatial variability of soil CO2 emission and other properties using sequential Gaussian simulations. The study was conducted in a sugarcane area, using a regular sampling grid with 141 points, where soil CO2 emission, soil temperature, air-filled pore space, soil organic matter and soil bulk density were evaluated. All variables showed spatial dependence structure. The soil CO2 emission was positively correlated with organic matter (r = 0.25, p < 0.05) and air-filled pore space (r = 0.27, p < 0.01) and negatively with soil bulk density (r = -0.41, p < 0.01). However, when the estimated spatial values were considered, the air-filled pore space was the variable mainly responsible for the spatial characteristics of soil respiration, with a correlation of 0.26 (p < 0.01). For all variables, individual simulations represented the cumulative distribution functions and variograms better than ordinary kriging and E-type estimates. The greatest uncertainties in predicting soil CO2 emission were associated with areas with the highest estimated values, which produced estimates from 0.18 to 1.85 t CO2 ha-1, according to the different scenarios considered. The knowledge of the uncertainties generated by the different scenarios can be used in inventories of greenhouse gases, to provide conservative estimates of the potential emission of these gases.

PEDO-TRANSFER FUNCTIONS FOR ESTIMATING SOIL BULK DENSITY IN CENTRAL AMAZONIA

Under field conditions in the Amazon forest, soil bulk density is difficult to measure. Rigorous methodological criteria must be applied to obtain reliable inventories of C stocks and soil nutrients, making this process expensive and sometimes unfeasible. This study aimed to generate models to estimate soil bulk density based on parameters that can be easily and reliably measured in the field and that are available in many soil-related inventories. Stepwise regression models to predict bulk density were developed using data on soil C content, clay content and pH in water from 140 permanent plots in terra firme (upland) forests near Manaus, Amazonas State, Brazil. The model results were interpreted according to the coefficient of determination (R2) and Akaike information criterion (AIC) and were validated with a dataset consisting of 125 plots different from those used to generate the models. The model with best performance in estimating soil bulk density under the conditions of this study included clay content and pH in water as independent variables and had R2 = 0.73 and AIC = -250.29. The performance of this model for predicting soil density was compared with that of models from the literature. The results showed that the locally calibrated equation was the most accurate for estimating soil bulk density for upland forests in the Manaus region.

Els bancs de dades de la flora dels Països Catalans

Data banks on the flora of the Catalan Countries. Two data banks on the flora of the Catalan Countries (NE and E of the Iberian Peninsule and Balearic Islands) have been set up by the Secció de Ciències of the Institut d'Estudis Catalans (I.E.C., Institute of Catalan Studies). One is devoted to bibliography and the other to floristics, in this first phase concerned only with vascular plants. The sources are all types of publications containing concrete information on the vascular flora of the Catalan Countries. The information is transcribed on precoded forms so as to standardize the data and thus permit homogeneous input for subsequent storage in the computer. The coding schemes and characteristics of the forms are described for each of the data banks. Only the phytocoenological inventories receive special treatment which is discussed withreference to the floristic data bank. A first issue is annexed: the bibliografy concerning the vascular flora of Catalan Countries (years 1983 and 1984).

Evaluación del interés natural del Parque Nacional de Aigüestortes i estany de Sant Maurici a partir de la cartografía de hábitats CORINE

diverse and in most cases including lakes, snow beds and fens.

Multiplan Spreadsheets for Highway and Hydraulic Engineering Computations in County Engineering Offices, HR-284, 1987

Multiplan spreadsheet solutions were developed for a set of hydraulic and highway engineering computations of common interest to county engineers. These include earthwork, vertical and horizontal curves, staking superelevated curves and sign inventories for highways. The hydraulic applications were ditch flow, runoff, culvert size and stage discharge.

A recent inventory of the bats of Mozambique with new documentation of 7 new species for the country

The bat fauna of Mozambique is poorly documented. We conducted a series of inventories across the country between 2005 and 2009, resulting in the identification of 50 species from 41 sites. Of these, seven species represent new national records that increase the country total to 67 species. These data include results from the first detailed surveys across northern Mozambique, over an area representing almost 50% of the country. We detail information on new distribution records and measurements of these specimens. Special attention is paid to the Rhinolophidae, because these include several taxa that are currently in a state of taxonomic confusion. Furthermore, we also present some notes on taxonomy, ecology and echolocation calls. Finally, we combine modelled distributions to present predicted species richness across the country. Species richness was lowest across the coastal plain, to the east and far north, and is predicted to increase in association with rising altitude and higher topographic unevenness of the landscape.

Emerging Threats to Iowa's Forests, Communities, Wood Industry and Economy, 2013

Iowa’s three million acres of forest land provide environmental benefits to all Iowans in terms of soil erosion control, air quality, and water quality. In 2013, more than 6.5 million trees died. Within those trees there were more than 125 million board feet of wood, compared to 98 million board feet of wood harvested. This level of mortality is the highest level reported from US Forest Service inventories in twenty years. This is disturbing when considering more than 18,000 Iowans are employed in the wood products and manufacturing industry, generating nearly $4 billion in annual sales, more than $900 million in annual payroll and more than $25 million to private woodland owners annually from the sale of timber.

Aplicación de la metodología “policy deployment” planificación estratégica a un departamento de suministro de materiales para aerogeneradores para reducir inventarios

Debido a la necesidad de diferenciarse y hacer frente a la competencia, las empresas han apostado por desarrollar operaciones que den valor al cliente, por eso muchas de ellas han visto en las herramientas lean la oportunidad para mejorar sus operaciones. Esta mejora implica la reducción de dinero, personas, equipos grandes, inventario y espacio, con dos objetivos: eliminar despilfarro y reducir la variabilidad. Para conseguir los objetivos estratégicos de la empresa es imprescindible qué éstos estén alineados con los planes de la gerencia a nivel medio y a su vez con el trabajo realizado por los empleados para asegurar que cada persona está alineada en la misma dirección y al mismo tiempo. Ésta es la filosofía de la planificación estratégica. Por ello uno de los objetivos de este proyecto será el desarrollar una herramienta que facilite la exposición de los objetivos de la empresa y la comunicación de los mismos a todos los niveles de la organización para a partir de ellos y tomando como referencia la necesidad de reducir inventarios en la cadena de suministro se realizará un estudio de la producción de un componente de control del aerogenerador para conseguir nivelarla y reducir su inventario de producto terminado. Los objetivos particulares en este apartado serán reducir el inventario en un 28%, nivelar la producción reduciendo la variabilidad del 31% al 24%, mantener un stock máximo de 24 unidades garantizando el suministro ante una demanda variable, incrementar la rotación del inventario en un 10% y establecer un plan de acción para reducir el lead time entre un 40-50%. Todo ello será posible gracias a la realización del mapa de valor presente y futuro para eliminar desperdicios y crear un flujo continuo y el cálculo de un supermercado que mantenga el stock en un nivel óptimo.

Evaluación y optimización de los servicios de un taller de mantenimiento mediante el software de simulación ARENA

Debido a la necesidad de diferenciarse y hacer frente a la competencia, las empresas han apostado por desarrollar operaciones que den valor al cliente, por eso muchas de ellas han visto en las herramientas lean la oportunidad para mejorar sus operaciones. Esta mejora implica la reducción de dinero, personas, equipos grandes, inventario y espacio, con dos objetivos: eliminar despilfarro y reducir la variabilidad. Para conseguir los objetivos estratégicos de la empresa es imprescindible qué éstos estén alineados con los planes de la gerencia a nivel medio y a su vez con el trabajo realizado por los empleados para asegurar que cada persona está alineada en la misma dirección y al mismo tiempo. Ésta es la filosofía de la planificación estratégica. Por ello uno de los objetivos de este proyecto será el desarrollar una herramienta que facilite la exposición de los objetivos de la empresa y la comunicación de los mismos a todos los niveles de la organización para a partir de ellos y tomando como referencia la necesidad de reducir inventarios en la cadena de suministro se realizará un estudio de la producción de un componente de control del aerogenerador para conseguir nivelarla y reducir su inventario de producto terminado. Los objetivos particulares en este apartado serán reducir el inventario en un 28%, nivelar la producción reduciendo la variabilidad del 31% al 24%, mantener un stock máximo de 24 unidades garantizando el suministro ante una demanda variable, incrementar la rotación del inventario en un 10% y establecer un plan de acción para reducir el lead time entre un 40-50%. Todo ello será posible gracias a la realización del mapa de valor presente y futuro para eliminar desperdicios y crear un flujo continuo y el cálculo de un supermercado que mantenga el stock en un nivel óptimo.

Planning information system, 1967.

The Transportation Facilities Manual provides a system of identifying and coding existing streets and highways and of recording data pertaining to these facilities. This manual is part 1 and together with the other two documents may be used in connection with the preparation of comprehensive and special planning an urban research studies of all kinds. Particular emphasis was placed on the updating of collected information so that basic inventories pertaining to the planning process can be kept current without undue effort or cost.

Grade and Cross Slope Estimation from LIDAR-based Surface Models, 2003

Many transportation agencies maintain grade as an attribute in roadway inventory databases; however, the information is often in an aggregated format. Cross slope is rarely included in large roadway inventories. Accurate methods available to collect grade and cross slope include global positioning systems, traditional surveying, and mobile mapping systems. However, most agencies do not have the resources to utilize these methods to collect grade and cross slope on a large scale. This report discusses the use of LIDAR to extract roadway grade and cross slope for large-scale inventories. Current data collection methods and their advantages and disadvantages are discussed. A pilot study to extract grade and cross slope from a LIDAR data set, including methodology, results, and conclusions, is presented. This report describes the regression methodology used to extract and evaluate the accuracy of grade and cross slope from three dimensional surfaces created from LIDAR data. The use of LIDAR data to extract grade and cross slope on tangent highway segments was evaluated and compared against grade and cross slope collected using an automatic level for 10 test segments along Iowa Highway 1. Grade and cross slope were measured from a surface model created from LIDAR data points collected for the study area. While grade could be estimated to within 1%, study results indicate that cross slope cannot practically be estimated using a LIDAR derived surface model.

Occurrence of Symphyla (Myriapoda) in the region of the Upper Solimões River, Amazonas, Brazil

The present work aimed at identifying the Symphyla species diversity and abundance in various land-use systems under different degrees of intensification in western Amazonia. This is the first inventory of Symphyla in primary and secondary forest, crops, agroforestry systems and pastures which was carried out in Benjamin Constant municipality, in the region of the Upper Solimões River, Brazil. Samples (n = 101) were collected using a metal corer, and the symphylan extraction was carried out using Berlese-Tullgren funnels. Two genera and three species of symphylans were encountered. Considering the diversity encountered in Amazonian inventories, with only four genera and five known species overall, the three species found in the present study are considered a reasonable representation of the regional diversity. Two of the Hanseniella species found have been known to cause plant damage.

Uuden täydennysyhteistyömallin toteuttaminen: vaikutukset toimittajayritykseen

Pärjätäkseen nykypäivän kiristyvässä kilpailussa yritysten on kuuluttava kilpailukykyiseen toimitusketjuun ja toimittava yhteistyössä muiden yritysten kanssa. Yksi tunnetuimmista yhteistyömenetelmistä on täydennysyhteistyö, jossa toimittaja vastaa toimitusten suunnittelusta ilman perinteistä tilaus-toimitus-prosessia. Täydennysyhteistyöstä käytetään eri nimityksiä toimialasta ja toimitusketjun portaasta riippuen, mutta yleisellä tasolla on kyse samoista periaatteista: toimittajalla on vastuu varaston täydentämisestä ja sillä on käytössään täydennyspäätöksiin tarvittavaa tietoa. Työssä tarkastellaan tapausta, jossa toimittaja on ottanut käyttöön uuden täydennysyhteistyöhön liittyvän toimintatavan ja täydennystoimitusten laskentaan käytettävän työkalun. Tavoitteena on selvittää uuden täydennysyhteistyömallin käyttöönoton vaikutukset toimittajan näkökulmasta. Kirjallisuuskatsauksen avulla kartoitetaan täydennystoimitusten suunnitteluun vaikuttavat tekijät. Työssä kuvataan vanha ja uusi täydennysyhteistyömalli ja niitä vertaillaan keskenään. Uuden tyädennysyhteistyömallin vaikutuksia tutkitaan kolmella tasolla: yhteistyön mahdollistajat, suunnittelu ja prosessit sekä suorituskyky. Tutkimuksen perusteella uuden täydennysyhteistyömallin etuja ovat muun muassa tiedon käsittelyn nopeus ja helppous. Puutteeksi koetaan toimitussuunnitelman muuttamisen hankaluus työkalussa. Vaikka lähes kaikkien tutkimusotoksen tuotteiden keskimääräiset varastotasot olivat alentuneet uuden täydennysyhteistyömallin käyttöönoton jälkeen, varastotavoitteiden saavuttaminen ei ollut parantunut. Tuloksiin vaikuttavat useattekijät, joista tärkeimpiä ovat kysynnän vaihtelu ja volyymi sekä varastotavoite. Lisäksi ennustetarkkuus vaikuttaa toimitusten suunnitteluun ja siten varastonsuorituskykyyn.

Selection of bee species for environmental risk assessment of GM cotton in the Brazilian Cerrado

The objective of this work was to list potential candidate bee species for environmental risk assessment (ERA) of genetically modified (GM) cotton and to identify the most suited bee species for this task, according to their abundance and geographical distribution. Field inventories of bee on cotton flowers were performed in the states of Bahia and Mato Grosso, and in Distrito Federal, Brazil. During a 344 hour sampling, 3,470 bees from 74 species were recovered, at eight sites. Apis mellifera dominated the bee assemblages at all sites. Sampling at two sites that received no insecticide application was sufficient to identify the three most common and geographically widespread wild species: Paratrigona lineata, Melissoptila cnecomola, and Trigona spinipes, which could be useful indicators of pollination services in the ERA. Indirect ordination of common wild species revealed that insecticides reduced the number of native bee species and that interannual variation in bee assemblages may be low. Accumulation curves of rare bee species did not saturate, as expected in tropical and megadiverse regions. Species-based approaches are limited to analyze negative impacts of GM cotton on pollinator biological diversity. The accumulation rate of rare bee species, however, may be useful for evaluating possible negative effects of GM cotton on bee diversity.