Real-time process plant fault diagnosis

Operators can become confused while diagnosing faults in process plant while in operation. This may prevent remedial actions being taken before hazardous consequences can occur. The work in this thesis proposes a method to aid plant operators in systematically finding the causes of any fault in the process plant. A computer aided fault diagnosis package has been developed for use on the widely available IBM PC compatible microcomputer. The program displays a coloured diagram of a fault tree on the VDU of the microcomputer, so that the operator can see the link between the fault and its causes. The consequences of the fault and the causes of the fault are also shown to provide a warning of what may happen if the fault is not remedied. The cause and effect data needed by the package are obtained from a hazard and operability (HAZOP) study on the process plant. The result of the HAZOP study is recorded as cause and symptom equations which are translated into a data structure and stored in the computer as a file for the package to access. Probability values are assigned to the events that constitute the basic causes of any deviation. From these probability values, the a priori probabilities of occurrence of other events are evaluated. A top-down recursive algorithm, called TDRA, for evaluating the probability of every event in a fault tree has been developed. From the a priori probabilities, the conditional probabilities of the causes of the fault are then evaluated using Bayes' conditional probability theorem. The posteriori probability values could then be used by the operators to check in an orderly manner the cause of the fault. The package has been tested using the results of a HAZOP study on a pilot distillation plant. The results from the test show how easy it is to trace the chain of events that leads to the primary cause of a fault. This method could be applied in a real process environment.

Drying processess in the United Kingdom:assessment of industrial energy utilisation and efficiency of drying systems and the modelling of drying characters using neural networks (BL)

Drying is an important unit operation in process industry. Results have suggested that the energy used for drying has increased from 12% in 1978 to 18% of the total energy used in 1990. A literature survey of previous studies regarding overall drying energy consumption has demonstrated that there is little continuity of methods and energy trends could not be established. In the ceramics, timber and paper industrial sectors specific energy consumption and energy trends have been investigated by auditing drying equipment. Ceramic products examined have included tableware, tiles, sanitaryware, electrical ceramics, plasterboard, refractories, bricks and abrasives. Data from industry has shown that drying energy has not varied significantly in the ceramics sector over the last decade, representing about 31% of the total energy consumed. Information from the timber industry has established that radical changes have occurred over the last 20 years, both in terms of equipment and energy utilisation. The energy efficiency of hardwood drying has improved by 15% since the 1970s, although no significant savings have been realised for softwood. A survey estimating the energy efficiency and operating characteristics of 192 paper dryer sections has been conducted. Drying energy was found to increase to nearly 60% of the total energy used in the early 1980s, but has fallen over the last decade, representing 23% of the total in 1993. These results have demonstrated that effective energy saving measures, such as improved pressing and heat recovery, have been successfully implemented since the 1970s. Artificial neural networks have successfully been applied to model process characteristics of microwave and convective drying of paper coated gypsum cove. Parameters modelled have included product moisture loss, core gypsum temperature and quality factors relating to paper burning and bubbling defects. Evaluation of thermal and dielectric properties have highlighted gypsum's heat sensitive characteristics in convective and electromagnetic regimes. Modelling experimental data has shown that the networks were capable of simulating drying process characteristics to a high degree of accuracy. Product weight and temperature were predicted to within 0.5% and 5C of the target data respectively. Furthermore, it was demonstrated that the underlying properties of the data could be predicted through a high level of input noise.

Ontological Approach to Domain Knowledge Representation for Information Retrieval in Multiagent Systems

An ontological representation of buyer interests’ knowledge in process of e-commerce is proposed to use. It makes it more efficient to make a search of the most appropriate sellers via multiagent systems. An algorithm of a comparison of buyer ontology with one of e-shops (the taxonomies) and an e-commerce multiagent system are realised using ontology of information retrieval in distributed environment.

Measures of process harmonization

Context Many large organizations juggle an application portfolio that contains different applications that fulfill similar tasks in the organization. In an effort to reduce operating costs, they are attempting to consolidate such applications. Before consolidating applications, the work that is done with these applications must be harmonized. This is also known as process harmonization. Objective The increased interest in process harmonization calls for measures to quantify the extent to which processes have been harmonized. These measures should also uncover the factors that are of interest when harmonizing processes. Currently, such measures do not exist. Therefore, this study develops and validates a measurement model to quantify the level of process harmonization in an organization. Method The measurement model was developed by means of a literature study and structured interviews. Subsequently, it was validated through a survey, using factor analysis and correlations with known related constructs. Results As a result, a valid and reliable measurement model was developed. The factors that are found to constitute process harmonization are: the technical design of the business process and its data, the resources that execute the process, and the information systems that are used in the process. In addition, strong correlations were found between process harmonization and process standardization and between process complexity and process harmonization. Conclusion The measurement model can be used by practitioners, because it shows them the factors that must be taken into account when harmonizing processes, and because it provides them with a means to quantify the extent to which they succeeded in harmonizing their processes. At the same time, it can be used by researchers to conduct further empirical research in the area of process harmonization.

Problems Connected with the Realisation of State E-governance in the Republic of Bulgaria

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

Perceptions and experiences of the implementation, management, use and optimisation of electronic prescribing systems in hospital settings:protocol for a systematic review of qualitative studies

Introduction: There is increasing evidence that electronic prescribing (ePrescribing) or computerised provider/physician order entry (CPOE) systems can improve the quality and safety of healthcare services. However, it has also become clear that their implementation is not straightforward and may create unintended or undesired consequences once in use. In this context, qualitative approaches have been particularly useful and their interpretative synthesis could make an important and timely contribution to the field. This review will aim to identify, appraise and synthesise qualitative studies on ePrescribing/CPOE in hospital settings, with or without clinical decision support. Methods and analysis: Data sources will include the following bibliographic databases: MEDLINE, MEDLINE In Process, EMBASE, PsycINFO, Social Policy and Practice via Ovid, CINAHL via EBSCO, The Cochrane Library (CDSR, DARE and CENTRAL databases), Nursing and Allied Health Sources, Applied Social Sciences Index and Abstracts via ProQuest and SCOPUS. In addition, other sources will be searched for ongoing studies (ClinicalTrials.gov) and grey literature: Healthcare Management Information Consortium, Conference Proceedings Citation Index (Web of Science) and Sociological abstracts. Studies will be independently screened for eligibility by 2 reviewers. Qualitative studies, either standalone or in the context of mixed-methods designs, reporting the perspectives of any actors involved in the implementation, management and use of ePrescribing/CPOE systems in hospital-based care settings will be included. Data extraction will be conducted by 2 reviewers using a piloted form. Quality appraisal will be based on criteria from the Critical Appraisal Skills Programme checklist and Standards for Reporting Qualitative Research. Studies will not be excluded based on quality assessment. A postsynthesis sensitivity analysis will be undertaken. Data analysis will follow the thematic synthesis method. Ethics and dissemination: The study does not require ethical approval as primary data will not be collected. The results of the study will be published in a peer-reviewed journal and presented at relevant conferences.

Assessing the effectiveness of five-year mechanical engineering technology programs of junior colleges in Taiwan, R.O.C.: An application of the CIPP evaluation model

The purpose of this study was to evaluate the mechanical engineering technology curriculum effectiveness at the junior college in Taiwan by using the CIPP evaluation model. The study concerned the areas of the curriculum, curriculum materials, individualized instruction, support services, teaching effectiveness, student achievement, and job performance. A descriptive survey method was used with questionnaires for data collection from faculty, students, graduates, and employers.^ All categories of respondents tended to agree that the curriculum provides appropriate occupational knowledge and skills. Students, graduates, and faculty tended to be satisfied with the curriculum; faculty tended to be satisfied with student achievement; graduates tended to be satisfied with their job preparation; and employers were most satisfied with graduates' job performance.^ Conclusions were drawn in the context, input, process, and product of the CIPP model. In Context area: Students were dissatisfied with curriculum flexibility in students characteristics. Graduates were dissatisfied with curriculum design for student's adaptability in new economic and industrial conditions; practicum flexibility in student characteristics; and course overlap. Both students and graduates were dissatisfied with practicum credit hours. Both faculty and students were dissatisfied with the number of required courses.^ In Input area: Students, faculty, and graduates perceived audiovisuals and manipulative aids positively. Faculty and students perceive CAI implementation positively. Students perceived textbooks negatively.^ In Process area: Faculty, students, and graduates perceived all support service negatively. Faculty tended to perceive the ratios of graduates who enter advanced study and related occupation, and who passed the professional skills certification, negatively. Students tended to perceive teaching effectiveness in terms of instructional strategies, the quality of instruction, overall suitability, and receivable, negatively. Graduates also tended to identify the instructional strategies as a negative perception. Faculty and students perceived curriculum objectives and practicum negatively. Both faculty and students felt that instructors should be more interested in making the courses a useful learning experience.^ In Product area: Employers were satisfied with graduates' academic preparation and job performance, adaptability, punctuality, and their ability to communicate, cooperate, and meet organization needs. Graduates were weak in terms of equipment familiarity and supervisory ability.^ In sum, the curriculum of the five-year mechanical engineering technology programs of junior college in Taiwan has served adequately up to this time in preparing a work force to enter industry. It is now time to look toward the future and adapt the curriculum and instruction for the future needs of this high-tech society. ^

Adherence to latent tuberculosis treatment among immigrants in low endemic settings : a scoping review

Contexte : En dépit du fait que la tuberculose est un problème de santé publique important dans les pays en voie de développement, les pays occidentaux doivent faire face à des taux d'infection important chez certaines populations immigrantes. Le risque de développer la TB active est 10% plus élevé chez les personnes atteintes de TB latente si elles ne reçoivent pas de traitement adéquat. La détection et le traitement opportun de la TB latente sont non seulement nécessaires pour préserver la santé de l'individu atteint mais aussi pour réduire le fardeau socio- économique et sanitaire du pays hôte. Les taux d'observance des traitements préventifs de TB latente sont faibles et une solution efficace à ce problème est requise pour contrôler la prévalence de l'infection. L'objectif de ce mémoire est d'identifier les facteurs qui contribuent à l'observance thérapeutique des traitements de TB latente auprès de nouveaux arrivants dans les pays occidentaux où les taux endémiques sont faibles. Méthodologie : Une revue systématique a été effectuée à partir de bases de données et répertoires scientifiques reconnus tels Medline, Medline in Process, Embase, Global Health, Cumulative Index to Nursing, le CINAHL et la librairie Cochrane pour en citer quelques un. Les études recensées ont été publiées après 1997 en français, en anglais, conduites auprès de populations immigrantes de l'occident (Canada, Etats-Unis, Europe, Royaume-Uni, Australie et la Nouvelle Zélande) dont le statut socio-économique est homogène. Résultats : Au total, neuf (9) études réalisées aux Etats-Unis sur des immigrants originaires de différents pays où la TB est endémique ont été analysées: deux (2) études qualitatives ethnographiques, six (6) quantitatives observationnelles et une (1) quantitative interventionnelle. Les facteurs sociodémographiques, les caractéristiques individuelles, familiales, ainsi que des déterminants liés à l'accès et à la prestation des services et soins de santé, ont été analysés pour identifier des facteurs d'observance thérapeutique. L'âge, le nombre d'années passées dans le pays hôte, le sexe, le statut civil, l'emploi, le pays d'origine, le soutien familiale et les effets secondaires et indésirables du traitement de la TB ne sont pas des facteurs ii déterminants de l'adhésion au traitement préventif. Toutefois, l’accès à l'information et de l'éducation adaptées aux langues et cultures des populations immigrantes, sur la TB et des objectifs de traitement explicites, l'offre de plan de traitement plus court et mieux tolérés, un environnement stable, un encadrement et l'adhésion au suivi médical par des prestataires motivés ont émergés comme des déterminants d'observance thérapeutique. Conclusion et recommandation : Le manque d'observance thérapeutique du traitement de la TB latente (LTBI) par des populations immigrantes, qui sont déjà aux prises avec des difficultés d'intégration, de communication et économique, est un facteur de risque pour les pays occidentaux où les taux endémiques de TB sont faibles. Les résultats de notre étude suggèrent que des interventions adaptées, un suivi individuel, un encadrement clinique et des plans de traitement plus courts, peuvent grandement améliorer les taux d'observance et d'adhésion aux traitements préventifs, devenant ainsi un investissement pertinent pour les pays hôtes.

Adherence to latent tuberculosis treatment among immigrants in low endemic settings : a scoping review

Contexte : En dépit du fait que la tuberculose est un problème de santé publique important dans les pays en voie de développement, les pays occidentaux doivent faire face à des taux d'infection important chez certaines populations immigrantes. Le risque de développer la TB active est 10% plus élevé chez les personnes atteintes de TB latente si elles ne reçoivent pas de traitement adéquat. La détection et le traitement opportun de la TB latente sont non seulement nécessaires pour préserver la santé de l'individu atteint mais aussi pour réduire le fardeau socio- économique et sanitaire du pays hôte. Les taux d'observance des traitements préventifs de TB latente sont faibles et une solution efficace à ce problème est requise pour contrôler la prévalence de l'infection. L'objectif de ce mémoire est d'identifier les facteurs qui contribuent à l'observance thérapeutique des traitements de TB latente auprès de nouveaux arrivants dans les pays occidentaux où les taux endémiques sont faibles. Méthodologie : Une revue systématique a été effectuée à partir de bases de données et répertoires scientifiques reconnus tels Medline, Medline in Process, Embase, Global Health, Cumulative Index to Nursing, le CINAHL et la librairie Cochrane pour en citer quelques un. Les études recensées ont été publiées après 1997 en français, en anglais, conduites auprès de populations immigrantes de l'occident (Canada, Etats-Unis, Europe, Royaume-Uni, Australie et la Nouvelle Zélande) dont le statut socio-économique est homogène. Résultats : Au total, neuf (9) études réalisées aux Etats-Unis sur des immigrants originaires de différents pays où la TB est endémique ont été analysées: deux (2) études qualitatives ethnographiques, six (6) quantitatives observationnelles et une (1) quantitative interventionnelle. Les facteurs sociodémographiques, les caractéristiques individuelles, familiales, ainsi que des déterminants liés à l'accès et à la prestation des services et soins de santé, ont été analysés pour identifier des facteurs d'observance thérapeutique. L'âge, le nombre d'années passées dans le pays hôte, le sexe, le statut civil, l'emploi, le pays d'origine, le soutien familiale et les effets secondaires et indésirables du traitement de la TB ne sont pas des facteurs ii déterminants de l'adhésion au traitement préventif. Toutefois, l’accès à l'information et de l'éducation adaptées aux langues et cultures des populations immigrantes, sur la TB et des objectifs de traitement explicites, l'offre de plan de traitement plus court et mieux tolérés, un environnement stable, un encadrement et l'adhésion au suivi médical par des prestataires motivés ont émergés comme des déterminants d'observance thérapeutique. Conclusion et recommandation : Le manque d'observance thérapeutique du traitement de la TB latente (LTBI) par des populations immigrantes, qui sont déjà aux prises avec des difficultés d'intégration, de communication et économique, est un facteur de risque pour les pays occidentaux où les taux endémiques de TB sont faibles. Les résultats de notre étude suggèrent que des interventions adaptées, un suivi individuel, un encadrement clinique et des plans de traitement plus courts, peuvent grandement améliorer les taux d'observance et d'adhésion aux traitements préventifs, devenant ainsi un investissement pertinent pour les pays hôtes.

Residence Time Distribution (Rtd) Associated with Statistical Weighted Moments to Fit Mathematical Models Using In Industrial Systems Diagnosis

This work presents a computational, called MOMENTS, code developed to be used in process control to determine a characteristic transfer function to industrial units when radiotracer techniques were been applied to study the unit´s performance. The methodology is based on the measuring the residence time distribution function (RTD) and calculate the first and second temporal moments of the tracer data obtained by two scintillators detectors NaI positioned to register a complete tracer movement inside the unit. Non linear regression technique has been used to fit various mathematical models and a statistical test was used to select the best result to the transfer function. Using the code MOMENTS, twelve different models can be used to fit a curve and calculate technical parameters to the unit.

Challenges to improve inter-professional care and service collaboration for people living with psychiatric disabilities in ordinary housing

The aim of this study was to describe health care- and social service professionals' experiences of a quality-improvement program implemented in the south of Sweden. The focus of the program was to develop inter-professional collaboration to improve care and service to people with psychiatric disabilities in ordinary housing. Focus group interviews and a thematic analysis were used. The result was captured as themes along steps in process. (I) Entering the quality-improvement program: Lack of information about the program, The challenge of getting started, and Approaching the resources reluctantly. (II) Doing the practice-based improvement work: Facing unprepared workplaces, and Doing twice the work. (III) Looking backevaluation over 1 year: Balancing theoretical knowledge with practical training, and Considering profound knowledge as an integral part of work. The improvement process in clinical practice was found to be both time and energy consuming, yet worth the effort. The findings also indicate that collaboration across organizational boundaries was broadened, and the care and service delivery were improved.

Postoperative Bowel Function and Related Factors in Enhanced Recovery Protocol with Patients Undergoing Hepatectomy

Patients’ bowel dysfunction is a major factor that weakens the results of surgical care as it can cause pain and weaken patients’ rehabilitation. Bowel dysfunction is a common postoperative problem, yet most incidents remain undocumented. The nursing profession has a significant role in enhancing the bowel function postoperatively. However, studies of postoperative bowel function after hepatectomy are scarce and somewhat incongruous. Enhanced recovery protocols are innovative models of care aiming for better outcomes of surgical care. Enhanced recovery protocols can improve gastrointestinal function after surgery, yet patients are also known to be satisfied with their care. The aim was to investigate if postoperative bowel function day varies between patients in terms of age, gender, ASA score, type of surgery, histology, patients’ experienced pain and experienced satisfaction three days after discharge and three months after operation in patients undergoing hepatectomy. The goal was to produce information for basis of scientific research, to give nurses in clinical setting more tools to work with hepatectomy patients undergoing enhanced recovery protocol and to produce information to nurse managers to use in process management of patients undergoing enhanced recovery protocol. The design of this study is descriptive. Data was collected retrospectively from hepatectomy patients (n = 134) undergoing enhanced recovery protocol within the first year of enhanced recovery protocol implementation. The data was based on registers and analyzed statistically. Mean age of patients was 62 years and mean day of discharge was 4. Main (n = 72) histology of the patients was colorectal liver metastases. Mean bowel function day was 3. Most of the patients were very satisfied or satisfied with the care three days after discharge (99%) and three months (90%) after operation. Most of the patients (72%) experienced moderate pain three days after discharge, but three months after operation 47% of the patients did not experience pain and 48% experienced moderate pain. There were no statistically significant differences in bowel function between different age groups, genders, ASA score groups or histologies. Neither were there statistically significant differences in postoperative bowel function in terms of experienced satisfaction or pain. There were statistically significant differences in postoperative bowel function between different types of surgery (p < 0.01). Nurses should take into consideration hepatectomy patients’ type of surgery and pay special attention in supporting major open hepatectomy patients’ postoperative bowel function. Nurses should educate patients undergoing major open hepatectomy about prolonged postoperative bowel function.

Interrupted searches in the BBMCSFilter context for MINLP problems

The BBMCSFilter method was developed to solve mixed integer nonlinear programming problems. This kind of problems have integer and continuous variables and they appear very frequently in process engineering problems. The objective of this work is to analyze the performance of the method when the coordinate searches are interrupted in the context of the multistart strategy. From the numerical experiments, we observed a reduction on the number of function evaluations and on the CPU time.

Police Legitimacy in Sub-Saharan Africa

Is fairness in process and outcome a generalizable driver of police legitimacy? In many industrialized nations, studies have demonstrated that police legitimacy is largely a function of whether citizens perceive treatment as normatively fair and respectful. Questions remain whether this model holds in less-industrialized contexts, where corruption and security challenges favor instrumental preferences for effective crime control and prevention. Support for and against the normative model of legitimacy has been found in less-industrialized countries, yet few have simultaneously compared these models across multiple industrializing countries. Using a multilevel framework and data from respondents in 27 countries in sub-Saharan Africa (n~43,000), I find evidence for the presence of both instrumental and normative influences in shaping the perceptions of police legitimacy. More importantly, the internal consistency of legitimacy (defined as obligation to obey, moral alignment, and perceived legality of the police) varies considerably from country to country, suggesting that relationships between legality, morality, and obligation operate differently across contexts. Results are robust to a number of different modeling assumptions and alternative explanations. Overall, the results indicate that both fairness and effectiveness matter, not in all places, and in some cases contrary to theoretical expectations.

Examining Levels of Automation in the Wood Processing Industry - A case study

Companies operating in the wood processing industry need to increase their productivity by implementing automation technologies in their production systems. An increasing global competition and rising raw material prizes challenge their competitiveness. Yet, too extensive automation brings risks such as a deterioration in situation awareness and operator deskilling. The concept of Levels of Automation is generally seen as means to achieve a balanced task allocation between the operators’ skills and competences and the need for automation technology relieving the humans from repetitive or hazardous work activities. The aim of this thesis was to examine to what extent existing methods for assessing Levels of Automation in production processes are applicable in the wood processing industry when focusing on an improved competitiveness of production systems. This was done by answering the following research questions (RQ): RQ1: What method is most appropriate to be applied with measuring Levels of Automation in the wood processing industry? RQ2: How can the measurement of Levels of Automation contribute to an improved competitiveness of the wood processing industry’s production processes? Literature reviews were used to identify the main characteristics of the wood processing industry affecting its automation potential and appropriate assessment methods for Levels of Automation in order to answer RQ1. When selecting the most suitable method, factors like the relevance to the target industry, application complexity or operational level the method is penetrating were important. The DYNAMO++ method, which covers both a rather quantitative technical-physical and a more qualitative social-cognitive dimension, was seen as most appropriate when taking into account these factors. To answer RQ 2, a case study was undertaken at a major Swedish manufacturer of interior wood products to point out paths how the measurement of Levels of Automation contributes to an improved competitiveness of the wood processing industry. The focus was on the task level on shop floor and concrete improvement suggestions were elaborated after applying the measurement method for Levels of Automation. Main aspects considered for generalization were enhancements regarding ergonomics in process design and cognitive support tools for shop-floor personnel through task standardization. Furthermore, difficulties regarding the automation of grading and sorting processes due to the heterogeneous material properties of wood argue for a suitable arrangement of human intervention options in terms of work task allocation.  The application of a modified version of DYNAMO++ reveals its pros and cons during a case study which covers a high operator involvement in the improvement process and the distinct predisposition of DYNAMO++ to be applied in an assembly system.