Coma measurement by use of an alternating phase-shifting mask mark with a specific phase width

The correlation between the coma sensitivity of the alternating phase-shifting mask (Alt-PSM) mark and the mark's structure is studied based on the Hopkins theory of partially coherent imaging and positive resist optical lithography (PROLITH) simulation. It is found that an optimized Alt-PSM mark with its phase width being two-thirds its pitch has a higher sensitivity to coma than Alt-PSM marks with the same pitch and the different phase widths. The pitch of the Alt-PSM mark is also optimized by PROLITH simulation, and the structure of p - 1.92 lambda/NA and pw = 2p/3 proves to be with the highest sensitivity. The optimized Alt-PSM mark is used as a measurement mark to retrieve coma aberration from the projection optics in lithographic tools. In comparison with an ordinary Alt-PSM mark with its phase width being a half its pitch, the measurement accuracies of Z(7) and Z(14) apparently increase. (C) 2009 Optical Society of America

Even aberration measurement of lithographic projection system based on optimized phase-shifting marks

In the present paper, we propose a novel method for measuring the even aberrations of lithographic projection optics by use of optimized phase-shifting marks on the test mask. The line/space ratio of the phase-shifting marks is optimized to obtain the maximum sensitivities of Zernike coefficients corresponding to even aberrations. Spherical aberration and astigmatism can be calculated from the focus shifts of phase-shifting gratings oriented at 0 degrees, 45 degrees, 90 degrees and 135 degrees at multiple illumination settings. The PROLITH simulation results show that, the measurement accuracy of spherical aberration and astigmatism obviously increase, after the optimization of the measurement mark. (C) 2008 Elsevier B.V. All rights reserved.

Avaliação de lixiviados de aterros de resíduos sólidos urbanos situados nos estados do Rio de Janeiro e Santa Catarina.

Avaliação de lixiviados de aterros de resíduos sólidos urbanos situados nos estados do Rio de Janeiro e Santa Catarina. Brasil, 2013, 137f. Dissertação de Mestrado em Engenharia Ambiental Faculdade de Engenharia, Universidade do Estado do Rio de Janeiro, 2013. Os lixiviados de aterros de resíduos sólidos urbanos possuem grande potencial poluidor em face de características tóxicas devido a altas concentrações de nitrogênio amoniacal, substâncias recalcitrantes, além de elevadas concentrações de matéria orgânica. Seu aporte em corpos hídricos, pode causar eutrofização e ser tóxica aos peixes. O alto índice de pluviosidade de nosso país intensifica o problema, pois acarreta em grandes quantidades de lixiviado uma vez que essa produção está diretamente relacionada com a quantidade de água que percola no aterro. Encontrar solução de tratamento para este efluente, que atenda a grande variedade de lixiviados, com características distintas de região para região, e que consigam atender os padrões brasileiros de lançamento de efluentes se constitui em um grande desafio para a Engenharia Nacional. Este trabalho se propôs a contribuir para o melhor conhecimento das características dos lixiviados tendo em vista o seu tratamento.

Controle de um sistema de eletroestimulação funcional.

Esta Dissertação irá apresentar a utilização de técnicas de controle nãolinear, tais como o controle adaptativo e robusto, de modo a controlar um sistema de Eletroestimulação Funcional desenvolvido pelo laboratório de Engenharia Biomédica da COPPE/UFRJ. Basicamente um Eletroestimulador Funcional (Functional Electrical Stimulation FES) se baseia na estimulação dos nervos motores via eletrodos cutâneos de modo a movimentar (contrair ou distender) os músculos, visando o fortalecimento muscular, a ativação de vias nervosas (reinervação), manutenção da amplitude de movimento, controle de espasticidade muscular, retardo de atrofias e manutenção de tonicidade muscular. O sistema utilizado tem por objetivo movimentar os membros superiores através do estímulo elétrico de modo a atingir ângulos-alvo pré-determinados para a articulação do cotovelo. Devido ao fato de não termos conhecimento pleno do funcionamento neuro-motor humano e do mesmo ser variante no tempo, não-linear, com parâmetros incertos, sujeito a perturbações e completamente diferente para cada indivíduo, se faz necessário o uso de técnicas de controle avançadas na tentativa de se estabilizar e controlar esse tipo de sistema. O objetivo principal é verificar experimentalmente a eficácia dessas técnicas de controle não-linear e adaptativo em comparação às técnicas clássicas, de modo a alcançar um controle mais rápido, robusto e que tenha um desempenho satisfatório. Em face disso, espera-se ampliar o campo de utilização de técnicas de controle adaptativo e robusto, além de outras técnicas de sistemas inteligentes, tais como os algoritmos genéticos, provando que sua aplicação pode ser efetiva no campo de sistemas biológicos e biomédicos, auxiliando assim na melhoria do tratamento de pacientes envolvidos nas pesquisas desenvolvidas no Laboratório de Engenharia Biomédica da COPPE/UFRJ.

Characterising the neutron and gamma responses of the NPL liquid scintillation detectors.

The absolute responses of the NPL liquid scintillation spectrometers to monoenergetic neutrons and gammas were measured at various energies in the ranges 1.2 - 17 MeV approximately for neutrons and 0.28 - 1.8 MeV for gammas. Additional measurements of the proton light output function were also carried out. Calculated responses were then obtained for the larger detector using the programs NRESP7 and PHRESP, and compared with the absolute measurements. Finally, response matrices for this detector were generated using responses calculated at closely spaced energies.

Analytical method of predicating the instabilities of a micro arch-shaped beam under electrostatic loading

An arch-shaped beam with different configurations under electrostatic loading experiences either the direct pull-in instability or the snap-through first and then the pull-in instability. When the pull-in instability occurs, the system collides with the electrode and adheres to it, which usually causes the system failure. When the snap-through instability occurs, the system experiences a discontinuous displacement to flip over without colliding with the electrode. The snap-through instability is an ideal actuation mechanism because of the following reasons: (1) after snap-through the system regains the stability and capability of withstanding further loading; (2) the system flips back when the loading is reduced, i.e. the system can be used repetitively; and (3) when approaching snap-through instability the system effective stiffness reduces toward zero, which leads to a fast flipping-over response. To differentiate these two types of instability responses for an arch-shaped beam is vital for the actuator design. For an arch-shaped beam under electrostatic loading, the nonlinear terms of the mid-plane stretching and the electrostatic loading make the analytical solution extremely difficult if not impossible and the related numerical solution is rather complex. Using the one mode expansion approximation and the truncation of the higher-order terms of the Taylor series, we present an analytical solution here. However, the one mode approximation and the truncation error of the Taylor series can cause serious error in the solution. Therefore, an error-compensating mechanism is also proposed. The analytical results are compared with both the experimental data and the numerical multi-mode analysis. The analytical method presented here offers a simple yet efficient solution approach by retaining good accuracy to analyze the instability of an arch-shaped beam under electrostatic loading.

Extinction of lean near-limit methane/air flames at elevated pressures under normal- and reduced-gravity

perimentally at evaluated pressures and under normal- and micro-gravity conditions utilizing the 3.5 s drop tower of the National Microgravity Laboratory of China. The results showed that under micro-gravity conditions the natural convection is minimized and the flames become more planar and symmetric compared to normal gravity. In both normal- and micro-gravity experiments and for a given strain rate and fuel concentration, the flame luminosity was found to enhance as the pressure increases. On the other hand, at a given pressure, the flame luminosity was determined to weaken as the strain rate decreases. At a given strain rate, the fuel concentration at extinction was found to vary non-monotonically with pressure, namely it first increases and subsequently decreases with pressure. The limit fuel concentration peaks around 3 and 4 atm under normal- and micro-gravity, respectively. The extinction limits measured at micro-gravity were in good agreement with predictions obtained through detailed numerical simulations but they are notably lower compared to the data obtained under normal gravity. The simulations confirmed the non-monotonic variation of flammability limits with pressure, in agreement with previous studies. Sensitivity analysis showed that for pressures between one and 5 atm, the near-limit flame response is dominated by the competition between the main branching, H + O2 ? OH + O, and the pressure sensitive termination, H+O2+M? HO2 + M, reaction. However, for pressures greater than 5 atm it was determined that the HO2 kinetics result in further chain branching in a way that is analogous to the third explosion limit of H2/O2 mixtures. 2010 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Contribution of biomass combustion to air pollutant emissions

In Portugal, it was estimated that around 1.95 Mton/year of wood is used in residential wood burning for heating and cooking. Additionally, in the last decades, burnt forest area has also been increasing. These combustions result in high levels of toxic air pollutants and a large perturbation of atmospheric chemistry, interfere with climate and have adverse effects on health. Accurate quantification of the amounts of trace gases and particulate matter emitted from residential wood burning, agriculture and garden waste burning and forest fires on a regional and global basis is essential for various purposes, including: the investigation of several atmospheric processes, the reporting of greenhouse gas emissions, and quantification of the air pollution sources that affect human health at regional scales. In Southern Europe, data on detailed emission factors from biomass burning are rather inexistent. Emission inventories and source apportionment, photochemical and climate change models use default values obtained for US and Northern Europe biofuels. Thus, it is desirable to use more specific locally available data. The objective of this study is to characterise and quantify the contribution of biomass combustion sources to atmospheric trace gases and aerosol concentrations more representative of the national reality. Laboratory (residential wood combustion) and field (agriculture/garden waste burning and experimental wildland fires) sampling experiments were carried out. In the laboratory, after the selection of the most representative wood species and combustion equipment in Portugal, a sampling program to determine gaseous and particulate matter emission rates was set up, including organic and inorganic aerosol composition. In the field, the smoke plumes from agriculture/garden waste and experimental wildland fires were sampled. The results of this study show that the combustion equipment and biofuel type used have an important role in the emission levels and composition. Significant differences between the use of traditional combustion equipment versus modern equipments were also observed. These differences are due to higher combustion efficiency of modern equipment, reflecting the smallest amount of particulate matter, organic carbon and carbon monoxide released. With regard to experimental wildland fires in shrub dominated areas, it was observed that the largest organic fraction in the samples studied was mainly composed by vegetation pyrolysis products. The major organic components in the smoke samples were pyrolysates of vegetation cuticles, mainly comprising steradienes and sterol derivatives, carbohydrates from the breakdown of cellulose, aliphatic lipids from vegetation waxes and methoxyphenols from the lignin thermal degradation. Despite being a banned practice in our country, agriculture/garden waste burning is actually quite common. To assess the particulate matter composition, the smoke from three different agriculture/garden residues have been sampled into 3 different size fractions (PM2.5, PM2.5-10 and PM>10). Despite distribution patterns of organic compounds in particulate matter varied among residues, the amounts of phenolics (polyphenol and guaiacyl derivatives) and organic acids were always predominant over other organic compounds in the organosoluble fraction of smoke. Among biomarkers, levoglucosan, β-sitosterol and phytol were detected in appreciable amounts in the smoke of all agriculture/garden residues. In addition, inositol may be considered as an eventual tracer for the smoke from potato haulm burning. It was shown that the prevailing ambient conditions (such as high humidity in the atmosphere) likely contributed to atmospheric processes (e.g. coagulation and hygroscopic growth), which influenced the particle size characteristics of the smoke tracers, shifting their distribution to larger diameters. An assessment of household biomass consumption was also made through a national scale survey. The information obtained with the survey combined with the databases on emission factors from the laboratory and field tests allowed us to estimate the pollutant amounts emitted in each Portuguese district. In addition to a likely contribution to the improvement of emission inventories, emission factors obtained for tracer compounds in this study can be applied in receptor models to assess the contribution of biomass burning to the levels of atmospheric aerosols and their constituents obtained in monitoring campaigns in Mediterranean Europe.

Transmission of West Nile virus in the Niagara Region among a population at risk for exposure

Background. West Nile Virus (WNV), a mosquito-borne flavivirus, is one of an increasing number of infectious diseases that have been emerging or re-emerging in the last two decades. Since the arrival ofWNV to Canada to present date, the Niagara Region has only reported 30 clinical cases, a small number compared to the hundreds reported in other regions of similar conditions. Moreover, the last reported human case in Niagara was in 2006. As it has been demonstrated that the majority of WNV infections are asymptomatic, the question remains whether the lack of clinical cases in Niagara truly reflects the lack of transmission to humans or if infections are still occurring but are mostly asymptomatic. Objectives. The general objective of this study was to establish whether or not active WNV transmission could be detected in a human population residing in Niagara for the 2007 transmission season. To fullfil this objective, a cross-sectional seroprevalence study was designed to investigate for the presence of anti-WNV antibodies in a sample of Mexican migrant agricultural workers employed in farms registered with the Seasonal Agricultural Workers Program (SAWP). Due to the Mexican origin of the study participants, three specific research objectives were proposed: a) determine the seroprevalence ofanti-WNV antibodies as well as anti-Dengue virus antibodies (a closely related virus prevalent in Mexico and likely to confound WNV serology); b) analyze risk factors associated with WNV and Dengue virus seropositivity; and c) assess the awareness of study participants about WNV infection as well as their understanding of the mode of transmission and clinical importance of the infection. Methodology: After obtaining ethics clearance from Brock University, farms were visited and workers invited to participate. Due to time constraints, only a small number of farms were enrolled with a resulting convenience and non-randomized study sample. Workers' demographic and epidemiological data were collected using a standardized questionnaire and blood samples were drawn to determine serum anti-WNV and anti- Dengue antibodies with a commercial ELISA. All positive samples were sent to the National Microbiology Laboratory in Winnipeg, Manitoba for confirmation with the Plaque Reduction Neutralization Test (PRNT). Data was analyzed with Stata 10.0. Antibody determinations were reported as seroprevalence proportions for both WNV and Dengue. Logistic regression was used to analyze risk factors that may be associated with seropositivity and awareness was reported as a proportion of the number of individuals possessing awareness over the total number of participants. Results and Discussion. In total 92 participants working in 5 farms completed the study. Using the commercial ELISA, seropositivity was as follows: 2.2% for WNV IgM, 20.7% for WNV IgG, and 17.1 % for Dengue IgG. Possible cross-reactivity was demonstrated in 15/20 (75.0%) samples that were positive for both WNV IgG and Dengue IgG. Confirmatory testing with the PRNT demonstrated that none of the WNV ELISA positive samples had antibodies to WNV but 13 samples tested positive for anti-Dengue antibodies (14.1 % Dengue sereoprevalence). The findings showed that the ELISA performance was very poor for assessing anti-WNV antibodies in individuals previously exposed to Dengue virus. However, the ELISA had better sensitivity and specificity for assessing anti-Dengue antibodies. Whereas statistical analysis could not be done for WNV seropositivity, as all samples were PRNT negative, logistic regression demonstrated several risk factors for Dengue exposure_ The first year coming to Canada appeared to be significantly associated with increased exposure to Dengue while lower socio-economic housing and the presence of a water basin in the yard in Mexico appeared to be significantly associated with a decreased exposure to Dengue_ These seemingly contradictory results illustrate that in mobile populations such as migrant workers, risk factors for exposure to Dengue are not easily identified and more research is needed. Assessing the awareness of WNV and its clinical importance showed that only 23% of participants had some knowledge of WNV, of which 76% knew that the infection was mosquito-borne and 47% recognized fever as a symptom. The identified lack of understanding and awareness was not surprising since WNV is not a visible disease in Mexico. Since WNV persists in an enzootic cycle in Niagara and the occurrence of future outbreaks is unpredictable, the agricultural workers remain at risk for transmission. Therefore it important they receive sufficient health education regarding WNV before leaving Mexico and during their stay in Canada. Conclusions. Human transmission of WNV could not be proven among the study participants even when due to their occupation they are at high risk for mosquito bites. The limitations of the study sample do not permit generalizable conclusions, however, the study findings are consistent with the absence of clinical cases in the Niagara Region, so it is likely that human transmission is indeed neglible or absent. As evidenced by our WNV serology results, PRNT must be utilized as a confirmatory test since false positivity occurs frequently. This is especially true when previous exposure to Dengue virus is likely.

Alkylation of phenol with methanol over mixed oxides of tin with some rare earth elements

Alkylation of phenol with methanol has been carried out over Sn-La and Sn-Sm mixed oxides of varying compositions at 623 K in a vapour phase flow reactor. It is found that the product selectivity is greatly influenced by the acid-base properties of the catalysts. Ortho-cresol formation is favoured over catalysts with weak acid sites whereas formation of 2,6-xylenol occurs in the presence of stronger acid sites. The cyclohexanol decomposition reaction and titrimetric method using Hammett indicators have been employed to elucidate the acid-base properties of the catalysts.

A comparative study on the anisole methylation activity of lanthanum-promoted Sn02 catalyst and its sulfate-doped analogue

A comparative study on the anisole methylation with methanol over lanthanum-promoted Sn02 catalyst and its sulfate-doped analogue is presented. A maximum 2.6-xylenol selectivity of 82% was achieved at 400 degreeC under optimized conditions at an anisole conversion of 65% over lanthanum-promoted Sn02 catalyst. The sulfate modification resulted in the dealkylation of anisole to phenol followed by several unselective side reactions due to the creation of strong acid sites. The activity of lanthanum-modified tin oxide catalysts in the selective formation of 2.6-xylenol is ascribed to the presence of weak Lewis acid sites and comparatively stronger basic sites.

A comparative study on aniline alkylation activity using methanol and dimethyl carbonate as the alkylating agents over Zn–Co–Fe ternary spinel systems

The catalyst compositions of the Zn1−xCOxFe2O4 (x= 0, 0.2, 0.5, 0.8 and 1.0) spiel series possessing ‘x’ values, x less than or equal to 0.5, are unique for selective N-monomethylation of aniline using methanol as the alkylating agent. Since dimethyl carbonate (DMC) is another potential non-toxic alkylating agent, alkylation of aniline was investigated over various Zn–Co ferrites using DMC as the alkylating agent. The merits and demerits of the two alkylating agents are compared. Catalytic activity followed a similar trend with respect to the composition of the ferrospinel systems. DMC is active at comparatively low temperature, where methanol shows only mild activity. However, on the selectivity basis, DMC as an alkylating agent could not compete with methanol, since the former gave appreciable amounts of N,N-dimethylaniline (NNDMA) even at low temperature where methanol gave nearly 99% N-methylaniline (NMA) selectivity. As in the case of methanol, DMC also did not give any C-alkylated products.

Selective N-monomethylation of aniline over Zn1-xNixFe2O4 (x=0, 0.2, 0.5, 0.8 and 1) type systems

The reaction of aniline with methanol was carried out over Zn1-xNixFe2O4 (x= 0, 0.2, 0.5, 0.8 and 1) type systems in a fixed-bed down-flow reactor. It was observed that systems possessing low ``x'' values are highly selective and active for mono N-alkylation of aniline leading to N-methyl aniline. Selectivity for N-methyl aniline over ZnFe2O4 was more than 99% under the optimized reaction conditions. Even at methanol to aniline molar ratio of 2, the yield of N-methyl aniline was nearly 55.5%, whereas its yield exceeded 67% at the molar ratio of 7. The Lewis acid sites of the catalysts are mainly responsible for the good catalytic performance. Cation distribution in the spinel lattice influences their acido-basic properties, and hence, these factors have been considered as helpful to evaluate the activity and stability of the systems.

Selective N-monomethylation of aniline using Zn1-x CoxFe2O4( x=0, 0.2, 0.5, 0.8 and 1.0)type systems

A series of ferrites having the general formula Zn1-xCoxFe2O4 (x=0, 0.2, 0.5, 0.8 and 1.0)were prepared by soft chemical route. The materials were characterized by adopting various physico-chemical methods. The reaction of aniline with methanol was studied in a fixed-bed reactor system as a potential source for the production of various methyl anilines. It was observed that systems possessing low ‘ x’ values are highly selective and active for N-monoalkylation of aniline leading to N-methylaniline. Reaction parameters were properly varied to optimize the reaction conditions for obtaining N-methylaniline selectively and in better yield. Among the systems Zn0.8Co0.2Fe2O4 is remarkable due to its very high activity and excellent stability. Under the optimized conditions N-methylaniline selectivity exceeded 98%. Even at a methanol to aniline molar ratio of 2, the yield of N-methylaniline was nearly 50%, whereas its yield exceeded 71% at the molar ratio of 5. ZnFe2O4, though executed better conversion than Zn0.8Co0.2Fe2O4 in the initial period of the run, deactivates quickly as the reaction proceeds. The Lewis acidity of the catalysts is mainly responsible for the good performance. Cation distribution in the spinel lattice influences their acido-basic properties and, hence, these factors have been considered as helpful parameters to evaluate the activity of the systems.