River Avon (including Glazebrook) fisheries survey 1978

This is the River Avon (including Glazebrook) fisheries survey 1978 report produced by South West Water Authority in 1978. This report aims to determine the penetration of Salmon into the River Avon system and to a lesser degree estimate the population of resident salmonids and other indigenous species. Six sections were electro fished at accessible points as detailed below. All fish were identified and measured. Each section was fished through three times to take the majority of the resident species. Small specimens of salmonid fry, eels and lamprey were common in almost all River Avon sections with the exception of Shipley bridge and Avon Dam but due to the mesh size of the standard dip nets used, many slipped through making accurate number estimation impossible.

River Bovey (main Teign tributary) fisheries survey 1978

This is the River Bovey (main Teign tributary) fisheries survey 1978 report produced by South West Water Authority in 1978. The aim of this report is to confirm or disprove the presence of alien coarse fish species thought present in the Bovey system. A chosen site was electro fished using D.C. methods wading upstream. All fish taken were measured and identified. Since it was not possible to distinguish between the young parr stages of migratory and non migratory trout, all parr taken have been included under the heading of Brown trout whereas in fact some of these parr may become migratory later in their life cycle.

River Bray fisheries survey 1978-80

This is the River Bray fisheries survey 1978-80 report produced by South West Water Authority in 1981. This report aims to assess the possible effects of new abstraction conditions at Leahamford on the fish communities of the River Bray, surveys have been carried out in 1978, 197S and 1980. Field work was done in August and September each; year. Abstraction began in summer 1979. On the River Bray one site upstream and three downstream of Leahamford were chosen. One site on the River Mole was surveyed and is considered as a control site, being not directly affected by abstraction. The sketch map shows these sites in relation to Leahamford.

A UPPES e sua relação com a Ditadura Militar (1968-1978)

Este trabalho tem por objetivo explorar e mostrar de que maneira, um sindicato conhecido dentre sua categoria como conservador, agiu durante o período da ditadura militar brasileira. Para tanto, serão examinadas as fontes produzidas pela instituição e serão problematizados a partir destas leituras, algumas posições tomadas por tal sindicato no recorte entre 1968 e 1978. A história de fundação e construção de um sindicato docente num Brasil assolado por uma ditadura militar, as lutas sindicais que aconteceram no pré e durante o golpe militar, o aprofundamento no exame do comportamento colaboracionista da UPPE e a contextualização deste comportamento com a conjuntura política da época, serão pontos explorados no trabalho

Trade of live brooders of the black tiger shrimp, Penaeus Monodon Fabricius 1978, at Visakhapatnam, Andhra Pradesh

The demand for brooders of Penaeus monodon by the hatcheries, which are solely dependant on wild brooders for their seed production, has resulted in a vigorous fishery and trade for this species, especially along the Visakhapatnam coast. More than three hundred brooders are brought in per day for trading during the peak landing season from December to March every year. The price of gravid brooders has been declining over the years but on an average is about Rs. 30,000 per brooder. The total length of male brooders ranged from 190 to 246 mm during the three years under study and for females it varied between 210 and 330 mm. A specialized methodology for transportation, storage and trade of P. monodon brooders has been evolved over the years at Visakhapatnam Fishing Harbour. Concentrated exploitation of brooders from the wild and presence of pathogens in them makes a strong case for development of specific pathogen free brooders and conservation of wild stock.

Effects of iso-nitrogenous fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120-day long experiment was conducted to find out the effects of urea plus triple super phosphate (UT), cow manure (CM) and poultry manure (PM) having iso-nil:rogen content on pond productivity and fish yield. Three fertilizer treatments, with three replicates each, were randomly assigned into nine earthen ponds of 100 m2 each. The stocking fish were rohu (Labeo ruhita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha with the ratio of 1:1:1. All ponds were fertilized fortnightly at the rate of 125 kg/ha urea plus 100 kg TSP/ha, 7000 kg/ha cow manure and 3500 kg/ha poultry manure for the treatment of UT, CM and PM, respectively, having an iso-nitrogen content of 56 kg in each. Though the physicochemical water quality parameters were more or less similar in all treatment ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P < 0.05) in the ponds receiving the treatment PM. Final growth as well as per unit production of fish was significantly higher (p

Effects of iso-nitrogenous and iso-phosphorus fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120 day long experiment was conducted to find out the effects of cow manure with urea and triple super phosphate (CUT), poultry manure with urea and triple super phosphate (PUT) and cow manure with poultry manure (CP) having similar quantities of nitrogen and phosphorus on pond productivity and fish yield. The stocking fish were rohu (Labeo rohita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha. All ponds were fertilized fortnightly at the rate of 4000 kg/ha cow manure with 62 kg/ha urea and 65 kg/ha TSP, 2700 kg/ha poultry manure with 62 kg/ha urea and 16 kg/ha TSP, and 4000kg/ha cow manure with 2700 kg/ha poultry manure for the treatment CUT, PUT and CP respectively. Each treatment contained an iso-nitrogen and iso-phosphorus of 56 kg and 46 kg respectively. Though the physico-chemical parameters were more or less similar in all ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P< 0.05) in the ponds receiving the fertilizer treatment of PUT than those of other treatments. Final growth as well as per unit production of fish of treatment PUT (1773 kg/ha) was significantly higher (P< 0.05) than that of treatment CP (1528 kg/ha) followed by that of treatment CUT (1336 kg/ha). The over all results showed that poultry manure with urea and triple super phosphate proved to be superior to cow manure with urea and triple super phosphate, and poultry manure with cow manure, even when nitrogen and phosphorus content was similar, in carp polyculture system under prevailing conditions.

Experiments on the induced breeding of milkfish, Chanos chanos (Forsskal) in 1978

Results indicated that a female having eggs with an average diameter of < 0.7 mm did not respond well to the hormone injections.

Effects of gamma radiation and freezing on the chemical and sensory changes in shrimp Penaeus monodon (Fabricius, 1978)

Gamma radiation (3, 6 and 9 kGy) in combination with low temperature (-20°C) were applied to retain the quality and shelf-life of shrimp, Penaeus monodon for a longer period. The quality was assessed by monitoring the chemical (TVN, TMA) and sensory changes in irradiated and non-irradiated (control) samples. Among chemical indicators of spoilage, total volatile nitrogen (TVN) values for irradiated shrimps were found to be 2.26, 2.18 and 1.57 mg N/100g of sample at 3, 6 and 9 kGy respectively after 90 days whereas for non-irradiated samples it was found 2.45mg N/100 g of sample. Trimethylamine (TMA) value for non-irradiated samples after 90 days were found 2.30mg N/100 g sample whereas that for irradiated shrimps at 3, 6 and 9 kGy were found to be 2.10, 2.08 and 1.98 mg N/100 g sample respectively. The sensory scores of control sample were gradually decreased with the progress of storage period. From this study, it was clear that gamma radiation in combination with low temperature showed shelf-life extension (90 days) in each dose of radiation used but during the use of 9 kGy radiation, P. monodon showed best quality.

A taxonomic revision of the genus Pseudostegana Okada, 1978 (Diptera, Drosophilidae)

The genus Pseudostegana is revised, with descriptions of 20 new species from Southeast Asia: P. angustifasciata Chen and Wang, sp. n., P. atrofrons Chen and Toda, sp. n., P. bifasciata Chen and Toda, sp. n., P. bisetosa Chen and Toda, sp. n., P. curvata Chen and Toda, sp. n., P. dactylis Chen and Toda, sp. n., P. dolichopoda Chen and Wang, sp. n., P. hamata Chen and Toda, sp. n., P. latifasciata Chen and Toda, sp. n., P. leptoptera Chen and Toda, sp. n., P. melanogaster Chen and Toda, sp. n., P. melanopogonias Chen and Toda, sp. n., P. myrmecoformis Chen and Toda, sp. n., P. nitidifrons Chen and Wang, sp. n., P. nitidiventris Chen and Toda, sp. n., P. orbicapitata Chen and Toda, sp. n., P. oxycephala Chen and Toda, sp. n., P. pallidimaculata Chen and Wang, sp. n., P. philoga Chen and Wang, sp. n. and P xanthoptera Chen and Wang, sp. n. On the basis of the wing patterns, six species-groups are established: the atrofrons, grandipalpis, fleximediata, javana, latiparma and zonaria groups. A key to the all species of this genus is provided.

中华双腔吸虫（Dicrocoelium Chinensis Tang et Tang，1978）（Trematoda：Digenea）卵子发生的超微结构研究

利用透射电镜技术观察了中华双腔吸虫（ＤｉｃｒｏｃｏｅｌｉｕｍｃｈｉｎｅｎｓｉｓＴａｎｇｅｔＴａｎｇ，１９７８）的卵巢结构和卵子发生过程，同时提出了划分复殖吸虫卵子发生过程的标准，总结了复殖吸虫卵子发生的一般规律以及中华双腔吸虫卵子发生的特有特征。此外比较分析了不同复殖吸虫的皮质颗粒特征，指出它在分类上可能有重要意义。中华双腔吸虫卵巢和卵子发生的超微结构与大多数复殖吸虫相似，但其卵巢中的各生殖细胞间有网状片层结构及一些颗粒、膜状碎片等支持和营养结构，还有退化的成熟卵母细胞。中华双腔吸虫的卵子发生分为卵原细胞

Developing ISO 14649-based conversational programming system for multi-channel complex machine tools

A multi-channel complex machine tool (MCCM) is a versatile machining system equipped with more than two spindles and turrets for both turning and milling operations. Despite the potential of such a tool, the value of the hardware is largely dependent on how the machine tools are effectively programmed for machining. In this paper we consider a shop-floor programming system based on ISO 14649 (called e-CAM), the international standard for the interface between computer-aided manufacture (CAM) and computer numerical control (CNC). To be deployed in practical industrial usage a great deal of research has to be carried out. In this paper we present: 1) Design consideration for an e-CAM system, 2) The architecture design of e-CAM, 3) Major algorithms to fulfill the modules defined in the architecture, and 4) Implementation details.

基于ISO/IEC 9126标准的软件质量评价系统

中国计算机学会