Portuguese banks and the economic adjustment programme: balance sheet adjustments and impact on profitability

Double Degree. A Work Project presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics and a Masters Degree in Finance from Louvain School of Management

Isokinetic assessment of the flexor-extensor balance of the knee in athletes with total rupture of the anterior cruciate ligament

The purpose of this study was to assess the flexor-extensor group of muscles of the knee in young athletes diagnosed with a total rupture of the anterior cruciate ligament (ACL). Eighteen knees of 18 athletes (14 men and 4 women) with an average age of 21.6 years (range 16-32 years) were assessed with a Cybex 6000 model isokinetic apparatus. The average interval between occurrence of the injury and assessment was 10.2 months (range 2 - 48 months). There was an associated meniscal injury in eight of the knees. Athletes with any other kind of associated injury, limitation, or blockage of the movement of the joint, significant pain during the exam, or interval between injury and exam of less than two months were excluded from the study. The parameters studied were the peak torque-velocity and flexor-extensor relationships at the constant angular velocities of 60°/sec and 240°/sec. Previous warming-up was done by means of an ergometric bicycle and adaptation with 3 submaximal repetitions. The contra-lateral side, which presented no injury, was used as control. Peak torque (PT) at the constant velocity of 60°/sec was greater than that at 240°/sec for knees with and without injuries. However, there was no significant difference between the injured and uninjured sides at 60°/sec or at 240°/sec. The average value for the flexor-extensor relationship at 60°/sec on the injured was 60% (( 6), compared to 57% (( 10) on the contra-lateral side. At 240°/sec, the average value was 75% ((10) on the injured side, and 65% ((12) on the contra-lateral side. In conclusion, despite the complete rupture of the ACL of one knee, the average values for the flexor-extensor relationship were similar on the injured and uninjured sides at the velocity of 60°/sec. As the velocity increased, an increase in the values for the flexor-extensor relationship of the knee also occurred, indicating a tendency of the performance of the flexor muscle group to approach that of the extensor muscle group, and this tendency was more pronounced on the side of the injury.

Ecologia dos Oligoghaeta da Amazônia. I. Estudo da migração horizontal e vertical de Chibui bari (Glossoscolecidae, Oligochaeta) através de observações de campo.

Trabalhando na área do Parque Zoobotânico da uFAc e em outras duas áreas no município de Rio Branco, AC, estudamos de dezembro de 1982 a março de 1984 a migração de Chibui bari (Glossoscoleclidae, Oligochaeta). Foram determinadas a temperatura, o pH e a umidade do solo bem como a precipitação mensal durante o período do estudo. As médias do pH e da temperatura do solo não apresentara diferenças estatisticamente entre o verão e o inverno. Verificamos que esta espécie se mantém ativa durante o inverno e é durante este que realiza os dois tipos de migração, vertical e horizontal. Durante o verão os animais permaneceram em estivação a aproximadamente 96,o cm de profundidade em contraste com a profundidade máxima de atividade que foi de 42,0 cm. As migrações foram limitadas pela umidade do solo e também pela disponibilidade de alimento'neste.

AVALIAÇÃO DE GENÓTIPOS DE SERINGUEIRA (Hevea spp.) AO Microcyclus ulei VISANDO À IDENTIFICAÇÃO DE FONTES DE RESISTÊNCIA HORIZONTAL

Avaliou-se, sob condições controladas, a resistência de genótipos de seringueira ao mal-das-folhas. Empregaram-se dois isolados de Microcyclus ulei, pertencentes aos grupos I e II. Utilizaram-se mudas em sacos plásticos e inocularam-se folíolos nos estádios B1/B2 com uma suspensão de 2 χ 105conídios/ml. Incubaram-se as mudas em câmara úmida a 24° C por 24 horas. Determinaram-se o período latente (PL), diâmetro das lesões (DL), tipo de lesão (TL) e tipo de reação (TR). A maioria dos genótipos testados foi suscetível a pelo menos um isolado do patógeno. Os genótipos que apresentaram resistência moderada, com maior período latente e menor esporulação a um isolado, em geral, foram suscetíveis ao outro. Apenas o genotipo AM/86/271 exibiu resistência incompleta, caracterizada por maior PL, menor DL e baixa esporulação. Entretanto, o número de isolados testados não assegurou o caráter da resistência. Com base nos resultados obtidos concluiu-se que os genótipos avaliados não apresentaram perspectivas para utilização em programas de melhoramento visando resistência ao M.ulei.

Lightweight adjustable partition system: evaluation of resistance to horizontal loads and functional failure from impacts

This paper presents and discusses the results of the serviciability and use condition tests carried on an innovative solution for partitions, designated AdjustMembrane developed within a research project. The proposed system is a modular non-loadbearing wall, tensioned between the pavements and ceiling slabs, which are used as anchoring elements. It allows several advantages, related with the weight reduction to achieve a good sustainable performance, such as the reduction of construction costs, energy, and materials, and it is easy to recycle and to reuse, allowing self-construction. Apart from a general presentation of the partition technology, this paper presents and discusses the results of experimental tests carried out. From the results obtained, it is possible to conclude that the solution fulfils the requirements for this typology of wall in terms of resistance to horizontal loads induced by soft and hard body impacts.

Fauna de flebotomíneos (Diptera: Psychodidae) em fragmentos florestais ao redor de conjuntos habitacionais na cidade de Manaus, Amazonas, Brasil: II. Estratificação horizontal

No período Janeiro a agosto de 1999, foi realizado um estudo sobre a presença de flebotomíneos em duas áreas de floresta residual, situadas próximas e no peri e domicilio de conjuntos habitacionais, na periferia da cidade de Manaus, Estado do Amazonas. O objetivo deste estudo foi verificar a fauna de flebotomíneos e observar possíveis mudanças de hábito principalmente nos vetores da leishmaniose cutânea. Foram realizadas coletas de flebotomíneos na bases de árvores no estrato entre 0 e 2 metros. As fêmeas foram dissecados para a procura de flagelados. Na Estrada do Turismo, capturamos 579 flebotomíneos de 12 espécies; 545 na floresta residual e 33 espécimes na área domiciliar. Na outra área, Cidade de Deus, foram capturados 976 exemplares de 21 espécies; 883 flebotomos na floresta residual e 72 espécimes no ambiente domiciliar. Todas as 375 fêmeas dissecadas foram negativas para flagelados. Lutzomyia umbratilis Ward & Fraiha,1997 foi a espécie mais abundante em todos os ambientes de coletas.

Evaluating balance, stability and gait symmetry of stroke patients using kinematic and dynamic gait lab data

Dissertação de mestrado integrado em Engenharia Biomédica

A cooperação transfronteiriça como oportunidade de desenvolvimento das regiões de fronteira. Da Raia Ibérica à euroregião Galiza-Norte de Portugal

Tese de Doutoramento em Geografia Humana.

Regionalización provincial y asociativismo intermunicipal en Córdoba (2005-2007): balance y recomendaciones

A partir de un amplio acuerdo entre los gobiernos locales de todos los partidos políticos y el gobierno provincial, el 22 de diciembre de 2004, la Legislatura de Córdoba sancionó la Ley orgánica de regionalización provincial Nº 9206. Con el desarrollo como fin, la Ley Nº 9206 supuso dos innovaciones trascendentes: por una parte, la creación de 26 nuevas regiones a razón de una por cada departamento existente y, por la otra, el reconocimiento de Comunidades Regionales a integrarse por decisión autónoma de los municipios y comunas (gobernadas por los Intendentes municipales y Presidentes comunales de cada región). En el 2005, se integraron 212 municipios y 152 comunas (es decir el 85% del total provincial) en 23 Comunidades Regionales que, además, acordaron sus prioridades de gestión regional y un Indicador de Desarrollo Regional, mediante la asistencia técnica del Programa de Fortalecimiento Institucional de Municipios (PROFIM) de la UCC. Sobre esas bases, en el 2006; las universidades cordobesas (mediante convenios con el Gobierno provincial) asesoraron a 17 Comunidades Regionales en el diseño de políticas de desarrollo. Esta investigación problematiza la regionalización en Córdoba, analizando críticamente sus avances y demoras, desde su puesta en marcha (diciembre de 2004) hasta el recambio de autoridades (diciembre de 2007) con el propósito de recomendar correcciones.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.

A nutrient balance model for typical Irish farming systems

The twin objectives of the work described were to construct nutrient balance models (NBM) for a range of Irish animal production systems and to evaluate their potential as a means of estimating the nutrient composition of farm wastes. The NBM has three components. The first is the intake of nutrients in the animal's diet. The second is retention or the nutrients the animal retains for the production of milk, meat or eggs. The third is the balance or the difference between the nutrient intake and retention. Data on the intake levels and their nutrient value for dairy cows, beef cattle, pigs and poultry systems were assembled. Literature searches and interviews with National experts were the primary sources of information. NBMs were then constructed for each production system. Summary tables of the nutrient values for the common diet constituents used in Irish animal production systems, the nutrient composition of the animal products and the NBMs (nutrient intake, retention and excretion) for a range of production systems were assembled. These represent the first comprehensive data set of this type for Irish animal production systems. There was generally good agreement between the derived NBMs values and those published in the literature. The NBMs were validated on a number of farms. Data on animal numbers, fertiliser use, concentrates inputs and production output were recorded on seven farms. Using the data a nutrient input/output balance was constructed for each farm. This was compared with the NBM estimate of the farm nutrient balance. The results showed good agreement between the measured balance and the NBM estimate particularly for the pig and poultry farms. However, the validation emphasised the inherent risks associated with NBMs. The average values used for feed intake and production parameters in the NEMs may result in the under or over estimate of actual nutrient balances on individual farms where these variables are substantially different. On the grassland farms there was a poor correlation between the input/output estimate and the NBM. This possibly results from the omission of the soil's contribution to the nutrient balance. However, the results indicate that the NBMs developed are a potentially useful tool for estimating nutrient balances. They also will serve to highlight the significant fraction of the nutrient inputs into farming systems that are retained on the farm. The potential of the NBM as a means of estimating the nutrient composition of farm wastes was evaluated on two farms. Feed intake and composition, animal production, slurry production was monitored during the indoor winter feeding period. Slurry samples were taken for analysis. The appropriates NBMs were used to estimate the nutrient balance for each farm. The nutrient content of the slurry produced was calculated. There was a good agreement between the NBM estimate and the measured values. This preliminary evaluation suggests that the NBM has a potential to provide the farmer with a simple means of estimating the nutrient value of his slurry.

contribution of horizontal. intracortical connections to learning-induced gamma oscillations

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2011

Stabilized finite element methods applied to transient convection-diffusion-reaction and population balance equations

Magdeburg, Univ., Fak. für Mathematik, Diss., 2011

Numerical approximations of population balance equations in particulate systems

Magdeburg, Univ., Fak. für Mathematik, Diss., 2006

Simulations for modelling of population balance equations of particulate processes using the discrete particle model (DPM)

Magdeburg, Univ., Fak. für Mathematik, Diss., 2009