888 resultados para Historic buildings -- Maryland -- Annapolis
Resumo:
Scottish sandstone buildings are now suffering the long-term effects of salt-crystallisation damage, owing in part to the repeated deposition of de-icing salts during winter months. The use of de-icing salts is necessary in order to maintain safe road and pavement conditions during cold weather, but their use comes at a price. Sodium chloride (NaCl), which is used as the primary de-icing salt throughout the country, is a salt known to be damaging to sandstone masonry. However, there remains a range of alternative, commercially available de-icing salts. It is unknown however, what effect these salts have on porous building materials, such as sandstone. In order to protect our built heritage against salt-induced decay, it is vital to understand the effects of these different salts on the range of sandstone types that we see within the historic buildings of Scotland. Eleven common types of sandstone were characterised using a suite of methods in order to understand their mineralogy, pore structure and their response to moisture movement, which are vital properties that govern a stone’s response to weathering and decay. Sandstones were then placed through a range of durability tests designed to measure their resistance to various weathering processes. Three salt crystallisation tests were undertaken on the sandstones over a range of 16 to 50 cycles, which tested their durability to NaCl, CaCl2, MgCl2 and a chloride blend salt. Samples were primarily analysed by measuring their dry weight loss after each cycle, visually after each cycle and by other complimentary methods in order to understand their changing response to moisture uptake after salt treatment. Salt crystallisation was identified as the primary mechanism of decay across each salt, with the extent of damage in each sandstone influenced by environmental conditions and pore-grain properties of the stone. Damage recorded in salt crystallisation tests was ultimately caused by the generation of high crystallisation pressures within the confined pore networks of each stone. Stone and test-specific parameters controlled the location and magnitude of damage, with the amount of micro-pores, their spatial distribution, the water absorption coefficient and the drying efficiency of each stone being identified as the most important stone-specific properties influencing salt-induced decay. Strong correlations were found between the dry weight loss of NaCl treated samples and the proportion of pores <1µm in diameter. Crystallisation pressures are known to scale inversely with pore size, while the spatial distribution of these micro-pores is thought to influence the rate, overall extent and type of decay within the stone by concentrating crystallisation pressures in specific regions of the stone. The water absorption determines the total amount of moisture entering into the stone, which represents the total amount of void space for salt crystallisation. The drying parameters on the other hand, ultimately control the distribution of salt crystallisation. Those stones that were characterised by a combination of a high proportion of micro-pores, high water absorption values and slow drying kinetics were shown to be most vulnerable to NaCl-induced decay. CaCl2 and MgCl2 are shown to have similar crystallisation behaviour, forming thin crystalline sheets under low relative humidity and/or high temperature conditions. Distinct differences in their behaviour that are influenced by test specific criteria were identified. The location of MgCl2 crystallisation close to the stone surface, as influenced by prolonged drying under moderate temperature drying conditions, was identified as the main factor that caused substantial dry weight loss in specific stone types. CaCl2 solutions remained unaffected under these conditions and only crystallised under high temperatures. Homogeneous crystallisation of CaCl2 throughout the stone produced greater internal change, with little dry weight loss recorded. NaCl formed distinctive isometric hopper crystals that caused damage through the non-equilibrium growth of salts in trapped regions of the stone. Damage was sustained as granular decay and contour scaling across most stone types. The pore network and hydric properties of the stones continually evolve in response to salt crystallisation, creating a dynamic system whereby the initial, known properties of clean quarried stone will not continually govern the processes of salt crystallisation, nor indeed can they continually predict the behaviour of stone to salt-induced decay.
Resumo:
This article examines the impact associated with the making of heritage and tourism at a destination. Special attention is paid to the residents’ perceptions of the impact. The examination is focused on the rural village of Sortelha, in Portugal, where, in recent decades, a state-led programme was implemented in order to renovate the historic buildings and built fabric and to generate benefits for the local community. Based on ethnographic materials collected in 2003, 2009 and 2013, the study demonstrates that the making of heritage may give rise to two opposing impacts simultaneously – increased social cohesion and place pride, on the one hand, and envy and competition (and, hence, social atomisation), on the other hand – and that residents are entirely cognisant of the tension between the two. The study has the potential to contribute to both the theoretical and the applied literature on heritage making.
Resumo:
This research analyzes the actual Historic-Architectural Heritage of Assú City which is located in Rio Grande do Norte State, Brazil, the study is based on both Assú s residents perception and technician s viewpoint. It looks forward to expose this community s relationship with the existing number of historic buildings, the scale of people s identity to the place and the association of this perception toward the preservation and conservation s scale of the historic settlement. Since the contextualization of the degradation s process of central areas, the study draw nea initially the conceptual aspects, focusing on the debate about heritage and the preservationist practice. The work complements the discussion through an approach on people-environment relationship and environmental perception, considering relevant factors for planning process. The obtained and presented data had diagnosed the condition of the architectural pile and also allowed this work to formulate recommendations for the studied area and architectural set in order to contribute for future urban politics implementation that consider the building, which are not only important to the considered population, but to the Rio Grande do Norte s History, as well
Resumo:
La conservazione preventiva degli edifici storici e dei beni custoditi al loro interno rappresenta una sfida ad oggi condivisa a livello internazionale. Tale conservazione dipende da numerose variabili, tra le quali il microclima indoor gioca un ruolo decisivo. Il fine di questa tesi è verificare come lo studio del microclima indoor, supportato dalla simulazione virtuale e dalla conoscenza storica delle evoluzioni dell’edificio stesso (legate a modifiche impiantistiche; architettoniche; d’uso; ecc., nel corso degli anni), costituiscano una base conoscitiva fondamentale, da cui architetti e restauratori possono partire per definire strategie specifiche, volte alla conservazione preventiva del Patrimonio. Per fare questo, l’autore presenta le indagini svolte per tre casi-studio: la Sala 33 della Reggia di Venaria Reale, in provincia di Torino, Italia; la Biblioteca Generale Storica dell’Università di Salamanca, in Spagna; il Portico della Gloria, nartece della Cattedrale di Santiago de Compostela, in Spagna. La metodologia definita e adottata per l’analisi e l’interpretazione dei dati di ciascun caso-studio ha previsto la comprensione e la messa in relazione tra: scelte costruttive; vicende evolutive delle singole architetture; fattori che ne determinano il microclima, letti (o ipotizzati) nelle relative modifiche diacroniche; degrado delle architetture e dei beni che sono custoditi in esse. Infine, uno degli esiti più innovativi della ricerca è stata la definizione di due indici di rischio: sono stati infatti definiti due nuovi indici (Heritage Microclimate Risk -HMR- e Predicted Risk of Damage -PRD-) legati al microclima degli edifici che ospitano beni e manufatti che costituiscono il patrimonio storico artistico e culturale. Tali indici sono stati definiti tenendo conto di tutte le variabili da cui il microclima dipende e dei fattori che ne determinano l’evolversi nel tempo e nello spazio.
Resumo:
The disintegration of stone materials used in sculpture and architecture due to the crystallization of salts is capable of irreparably damaging artistic objects and historic buildings. A number of phosphonates and carboxylates were tested here as potential crystallization modifiers for sodium carbonate crystallization. Precipitated phases during crystallization induced either by cooling or by evaporation tests were nahcolite (NaHCO3), natron (Na2CO3∙10H2O) and thermonatrite (Na2CO3∙H2O), identified using X-ray diffraction. By using the thermodynamic code PHREEQC and the calculation of the nucleation rate it was demonstrated that nahcolite had to be first phase formed during both tests. The formation of the other phases depended on the experimental conditions under which the two tests were conducted. Nahcolite nucleation is strongly inhibited in the presence of sodium citrate tribasic dihydrate (CA), polyacrylic acid 2100MW (PA) and etidronic acid (HEDP), when the additives are dosed at appropriate concentrations and the pH range of the resulting solution is about 8. Electrostatic attraction generated between the deprotonated organic additives and the cations present in solution appears to be the principal mechanism of additive-nahcolite interaction. Salt weathering tests, in addition to mercury intrusion porosimetry tests allowed to quantify the damage induced by such salts. FESEM observation of both salts grown on calcite single crystals and in limestone blocks subjected to salt crystallization tests allowed to identify the effect of these additives on crystal growth and development. The results show that PA seems to be the best inhibitor, while CA and HEDP, which show similar behaviors, are slightly less effective. The use of such effective crystallization inhibitors may lead to more efficient preventive conservation of ornamental stone affected by crystallization damage due to formation of sodium carbonate crystals.
Resumo:
Currently making digital 3D models and replicas of the cultural heritage assets play an important role in the preservation and having a high detail source for future research and intervention. In this dissertation, it is tried to assess different methods for digital surveying and making 3D replicas of cultural heritage assets in different scales of size. The methodologies vary in devices, software, workflow, and the amount of skill that is required. The three phases of the 3D modelling process are data acquisition, modelling, and model presentation. Each of these sections is divided into sub-sections and there are several approaches, methods, devices, and software that may be employed, furthermore, the selection process should be based on the operation's goal, available facilities, the scale and properties of the object or structure to be modeled, as well as the operators' expertise and experience. The most key point to remember is that the 3D modelling operation should be properly accurate, precise, and reliable; therefore, there are so many instructions and pieces of advice on how to perform 3D modelling effectively. It is an attempt to compare and evaluate the various ways of each phase in order to explain and demonstrate their differences, benefits, and drawbacks in order to serve as a simple guide for new and/or inexperienced users.
Resumo:
Modern society is now facing significant difficulties in attempting to preserve its architectural heritage. Numerous challenges arise consequently when it comes to documentation, preservation and restoration. Fortunately, new perspectives on architectural heritage are emerging owing to the rapid development of digitalization. Therefore, this presents new challenges for architects, restorers and specialists. Additionally, this has changed the way they approach the study of existing heritage, changing from conventional 2D drawings in response to the increasing requirement for 3D representations. Recently, Building Information Modelling for historic buildings (HBIM) has escalated as an emerging trend to interconnect geometrical and informational data. Currently, the latest 3D geomatics techniques based on 3D laser scanners with enhanced photogrammetry along with the continuous improvement in the BIM industry allow for an enhanced 3D digital reconstruction of historical and existing buildings. This research study aimed to develop an integrated workflow for the 3D digital reconstruction of heritage buildings starting from a point cloud. The Pieve of San Michele in Acerboli’s Church in Santarcangelo Di Romagna (6th century) served as the test bed. The point cloud was utilized as an essential referential to model the BIM geometry using Autodesk Revit® 2022. To validate the accuracy of the model, Deviation Analysis Method was employed using CloudCompare software to determine the degree of deviation between the HBIM model and the point cloud. The acquired findings showed a very promising outcome in the average distance between the HBIM model and the point cloud. The conducted approach in this study demonstrated the viability of producing a precise BIM geometry from point clouds.
Resumo:
Cette thèse contribue à l'état actuel des connaissances sur la compatibilité des nouveaux bâtiments avec les environnements urbains historiques. Elle suit un mode de présentation classique: Introduction, Revue de Littérature, Méthodologie, Résultats, Discussion et Conclusion. Le problème étudié est le manque d'orientation pour intégrer les processus de développement et de sauvegarde dans les contextes établis. La littérature récente révèle que les règles de préservation, aussi appelées normes et lignes directrices, ne peuvent pas garantir une relation compatible entre une intervention et son milieu. La pensée contemporaine dans le domaine de la conservation et de la gestion du patrimoine invite donc l’exploration d'autres moyens pour lier la nouvelle architecture à l'ancienne. Ainsi, le présent projet de recherche explore une approche alternative aux règles de préservation en vue d’atteindre le but de nouveaux bâtiments compatibles et d’améliorer la prise de décision fondée sur les valeurs. Pour produire des résultats spécifiques et convaincants, un cas a été sélectionné. Celui-ci est une ville dans la région du Golfe Arabe : la Ville de Koweït. Le résultat principal est le développement d’une approche, mise en œuvre en posant des questions approfondies sur le lieu, la conception et la construction des nouveaux bâtiments. Les questions suggérées dans la thèse mettent l’accent sur les valeurs patrimoniales et les choix de conception afin de permettre un changement réfléchi au sein des environnements urbains historiques. Elles aident aussi à évaluer les nouvelles propositions de projets au cas par cas. Pour démontrer comment cette approche pourrait être présentée et utilisée par les requérants et les évaluateurs, un modèle théorique est proposé. Ce modèle a ensuite été discuté avec des professionnels locaux et internationaux qui ont identifié ses forces et ses limites. En conclusion, l’ensemble des résultats montre que la mise à disposition de règles et / ou de questions approfondies n’est pas une solution satisfaisante puisqu’il y a d'autres enjeux importants qui devraient être abordés: comment appliquer l'orientation efficacement une fois qu’elle a été créée, comment développer la compétence liée à la prise de décision fondée sur les valeurs et comment insérer la conservation du patrimoine dans la mentalité du gouvernement local et des communautés. Lorsque ces enjeux seront traités, le patrimoine pourra devenir partie intégrante du processus de planification, ce qui est le but ultime. Enfin, cinq axes de recherche sont recommandés pour poursuivre l’exploration des idées introduites dans cette étude.
Resumo:
Rui Carita
Resumo:
Mode of access: Internet.
Resumo:
Chiefly tables.
Resumo:
Mode of access: Internet.
Resumo:
Title vignette.
Resumo:
Title vignette.
Resumo:
Mode of access: Internet.