928 resultados para Highest Posterior Density Region
Resumo:
The dieletric relaxation properties of thermosetting material nanocomposites based on spherosilicate nanoplatforms were studied from room temperature to 170 degrees C, varying the frequency from 10 to 1000 KHz. Permittivity (epsilon'), dielectric loss (epsilon ''), and activation energy (E-a) were calculated. The results of dielectric relaxation were confirmed by those of the final properties. The dielectric loss amplitude decreases with increasing ODPG content until about 70-73 wt % and slightly increases at higher ODPG content. This means that the increasing of the ODPG content in the composite samples decreases the number of pendants groups and/or increases crosslink densitv, causing decreased motion of organic tethers, and subsequently decreasing of the dipolar mobility. The results of apparent activation energy, fracture toughness and tensile modulus mechanical properties show the same profile with respect to ODPG content, in the sense that they exhibit maxima around 70 wt % ODPG. For the ODPG/MDA composites, this formulation of 70 wt % ODPG containing excess of amine is not composition where the highest crosslinked density is reached. This implies that the best mechanical properties and E-a are provided by some degree of chain flexibility. (c) 2007 Wiley Periodicals, Inc.
Resumo:
Introduction: Large nutritional surveys in Peru have identified the magnitude and location of the different types of malnutrition. The chronic type is the most prevalent one. However, although rates may be considered as alarming (even more in rural areas), only one of these studies contains information about intake characteristics, using 24-hour recalls (R24). That is, it lacks some other systems, adapted to the gastronomical characteristics of their regions and to the bioavailability of food in each area, in order to locate the origin of this situation and, thus, propose truly effective and efficient solutions. Aim: To determine the nutritional value of the main dishes consumed by the residents of a slum in Peruvian Amazon. Methods: Ninety-eight participants completed three 24-h recalls. Based on these data, we selected the 25 most commonly eaten dishes and evaluated their nutritional composition. We took note of the homemade recipes, weights and measures. In addition, we observed preparation and cooking. The mean nutritional composition of each dish was calculated per 100 g using the Nutriplato 4.6. software. We also calculated gains or losses resulting from culinary treatments. Results: Within those which include milk, the highest energy density is the mingado de arroz. In the group of fish, the most energetic is pescado frito, while within meat-based recipes tallarín con pollo, res asada and chancho frito are the most energetic ones. Regarding prepared dishes, the juane is the highest energy density of all recipes. Inside garnish, using bananas as the main ingredient, plátano frito and madurito are the most energetic. Fats are higher in fried dishes and those which contribute most fat ratio. The same thing happens with garnish as 100 grams of plátano frito or madurito contain more than 70% of the RDA. Res asada and juane present the highest sodium level. Conclusions: If we wish to offer healthier dishes, it is necessary to change their composition and/or cooking methods, reducing the consumption of fried foods. Sodium intake should also be reduced. Two foods could be important to that aim: menudencia de pollo, rich in B vitamins and low in fat, and frijol hervido, which is rich in vegetable protein and, with rice dishes ubiquitous in this area, increases the biological value of ingested proteins.
Resumo:
Neste trabalho foi realizada a análise econômica da produção de juvenis de tilápia-do-nilo em tanques-rede utilizando-se diferentes densidades de estocagem. O experimento foi desenvolvido em área aquícola, em delineamento de blocos casualizados, com quatro densidades de estocagem (100, 200, 300 e 400 peixes m-3), avaliadas com seis repetições, em dois períodos de criação: de março a abril de 2005 (52 dias - peso inicial de 43,08 ± 2,98 g e peso final de 262,14 ± 47,86 g) e de março a abril de 2006 (58 dias - peso inicial de 43,16 ± 5,34 g e peso final 314,24 ± 73,30 g). Foram avaliadas as seguintes variáveis econômicas: custo da ração mais custo do juvenil dividido pela biomassa, em R$ kg-1; porcentagem do custo da ração por quilo de peixe produzido sobre o preço de venda; porcentagem do custo do juvenil por quilo de peixe produzido sobre o preço de venda e; porcentagem dos custos da ração mais do juvenil por quilo de peixe produzido sobre o preço de venda. da menor densidade de estocagem (100) para a maior (400), ocorreu diminuição no ganho de peso diário e elevação do índice de conversão alimentar aparente, mas essa redução não comprometeu a taxa de sobrevivência. Entretanto, o ganho de biomassa aumentou com o adensamento de peixes. As maiores receitas líquidas foram obtidas nas densidades de estocagem de 100 e 200 peixes m-3. Os preços não remuneraram os custos operacionais (efetivo e total) em maiores densidades (300 e 400 peixes m-3). Os melhores resultados para a produção de juvenis de tilápia-do-nilo foram obtidos com densidades de até 200 peixes m-3.
Resumo:
We conducted a large-scale association study to identify genes that influence nonfamilial breast cancer risk using a collection of German cases and matched controls and >25,000 single nucleotide polymorphisms located within 16,000 genes. One of the candidate loci identified was located on chromosome 19p13.2 [odds ratio (OR) = 1.5, P = 0.001]. The effect was substantially stronger in the subset of cases with reported family history of breast cancer (OR = 3.4, P = 0.001). The finding was subsequently replicated in two independent collections (combined OR = 1.4, P < 0.001) and was also associated with predisposition to prostate cancer in an independent sample set of prostate cancer cases and matched controls (OR = 1.4, P = 0.002). High-density single nucleotide polymorphism mapping showed that the extent of association spans 20 kb and includes the intercellular adhesion molecule genes ICAM1, ICAM4, and ICAM5. Although genetic variants in ICAM5 showed the strongest association with disease status, ICAM1 is expressed at highest levels in normal and tumor breast tissue. A variant in ICAM5 was also associated with disease progression and prognosis. Because ICAMs are suitable targets for antibodies and small molecules, these findings may not only provide diagnostic and prognostic markers but also new therapeutic opportunities in breast and prostate cancer.
Resumo:
Peak bone mass achieved in adolescence is a determinant of bone mass in later life. In order to identify genetic variants affecting bone mineral density (BMD), we performed a genome-wide association study of BMD and related traits in 1518 children from the Avon Longitudinal Study of Parents and Children (ALSPAC). We compared results with a scan of 134 adults with high or low hip BMD. We identified associations with BMD in an area of chromosome 12 containing the Osterix (SP7) locus, a transcription factor responsible for regulating osteoblast differentiation (ALSPAC: P = 5.8 × 10-4; Australia: P = 3.7 × 10-4). This region has previously shown evidence of association with adult hip and lumbar spine BMD in an Icelandic population, as well as nominal association in a UK population. A meta-analysis of these existing studies revealed strong association between SNPs in the Osterix region and adult lumbar spine BMD (P = 9.9 × 10-11). In light of these findings, we genotyped a further 3692 individuals from ALSPAC who had whole body BMD and confirmed the association in children as well (P = 5.4 × 10-5). Moreover, all SNPs were related to height in ALSPAC children, but not weight or body mass index, and when height was included as a covariate in the regression equation, the association with total body BMD was attenuated. We conclude that genetic variants in the region of Osterix are associated with BMD in children and adults probably through primary effects on growth.
Resumo:
Weed management is one of the most important economic and agronomic issues facing farmers in Australia's grain regions. Weed species occurrence and abundance was monitored between 1997 and 2000 on 46 paddocks (sites) across 18 commercial farms located in the Northern Grain Region. The sites generally fell within 4 disjunct regions, from south to north: Liverpool Plains, Moree, Goondiwindi and Kingaroy. While high species richness was found (139 species or species groups), only 8 species occurred in all 4 regions and many (56 species) only occurred at 1 site or region. No species were observed at every site but 7 species (Sonchus spp., Avena spp., Conyza spp., Echinochloa spp., Convolvulus erubescens, Phalaris spp. and Lactuca serriola) were recorded on more than 70% of sites. The average number of species observed within crops after treatment and before harvest was less than 13. Species richness tended to be higher in winter pulse crops, cotton and in fallows, but overall was similar at the different sampling seasons (summer v. winter). Separate species assemblages associated with the Goondiwindi and Kingaroy regions were identified by correspondence analysis but these appeared to form no logical functional group. The species richness and density was generally low, demonstrating that farmers are managing weed populations effectively in both summer and winter cropping phases. Despite the apparent adoption of conservation tillage, an increase in opportunity cropping and the diversity of crops grown (13) there was no obvious effect of management practices on weed species richness or relative abundance. Avena spp. and Sonchus spp. were 2 of the most dominant weeds, particularly in central and southern latitudes of the region; Amaranthus spp. and Raphanus raphanistrum were the most abundant species in the northern part of the region. The ubiquity of these and other species shows that continued vigilance is required to suppress weeds as a management issue.
Resumo:
[EN] The objective of this paper is to analyze the incubation strategies developed in the universities of Andalusia, a relatively low-income region of Spain, to promote the creation of university spin-offs. These strategies are also compared to the incubation models noted in the literature. The performance of the university spin-offs created and its relation to the incubation strategies developed by the university are also analysed. The analysis is based on data from a survey of nine public universities that carry out strategies for the promotion of university spin-offs. The result of the analysis shows that university spin-off incubation strategies in Andalusia present specific characteristics not covered by certain models that are well-known in the literature on innovation. Then, a new stage in the process of the university spin-off incubation is proposed. We consider it to be a pre-strategic stage to the academic spin-off incubation strategies. The analysis also finds certain environmental factors associated to those spin-offs promoted by Andalusian universities that achieve the highest level of performance. This result suggests that previous to making any decision involving investment into developing incubation strategies, universities should gauge whether they have sufficient resources and the possibilities of connecting with a Technology Park.
Resumo:
Six years of bottom-trawl survey data, including over 6000 trawls covering over 200 km2 of bottom area throughout Alaska’s subarctic marine waters, were analyzed for patterns in species richness, diversity, density, and distribution of skates. The Bering Sea continental shelf and slope, Aleutian Islands, and Gulf of Alaska regions were stratified by geographic subregion and depth. Species richness and relative density of skates increased with depth to the shelf break in all regions. The Bering Sea shelf was dominated by the Alaska skate (Bathyraja parmifera), but species richness and diversity were low. On the Bering Sea slope, richness and diversity were higher in the shallow stratum, and relative density appeared higher in subregions dominated by canyons. In the Aleutian Islands and Gulf of Alaska, species richness and relative density were generally highest in the deepest depth strata. The data and distribution maps presented here are based on species-level data collected throughout the marine waters of Alaska, and this article represents the most comprehensive summary of the skate fauna of the region published to date.
Resumo:
The gypsy moth, Lymantria dispar, a major defoliator of broad leaf trees, was accidentally introduced into North America in 1869. Much interest has been generated regarding the potential of using natural pathogens for biological control of this insect. One of these pathogens, a highly specific fungus, Entomophaga maimaiga, was accredited with causing major epizootics in populations of gypsy moth across the north-eastern United States in 1989 and 1990 and is thought to be spreading northwards into Canada. This study examined gypsy moth population densities in the Niagara Region. The fungus, .E.. maimaiga, was artificially introduced into one site and the resulting mortality in host populations was noted over two years. The relationship between fungal mortality, host population density and occurrence of another pathogen, the nuclear polyhedrosis virus (NPV), was assessed. Gypsy moth population density was assessed by counting egg masses in 0.01 hectare (ha) study plots in six areas, namely Louth, Queenston, Niagara-on-the-Lake, Shorthills Provincial Park, Chippawa Creek and Willoughby Marsh. High variability in density was seen among sites. Willoughby Marsh and Chippawa Creek, the sites with the greatest variability, were selected for more intensive study. The pathogenicity of E. maimaiga was established in laboratory trials. Fungal-infected gypsy moth larvae were then released into experimental plots of varying host density in Willoughby Marsh in 1992. These larvae served as the inoculum to infect field larvae. Other larvae were injected with culture medium only and released into control plots also of varying host density. Later, field larvae were collected and assessed for the presence of .E.. maimaiga and NPV. A greater proportion of larvae were infected from experimental plots than from control plots indicating that the experimental augmentation had been successful. There was no relationship between host density and the proportion of infected larvae in either experimental or control plots. In 1992, 86% of larvae were positive for NPV. Presence and intensity of NPV infection was independent of fungal presence, plot type or interaction of these two factors. Sampling was carried out in the summer of 1993, the year after the introduction, to evaluate the persistence of the pathogen in the environment. Almost 50% of all larvae were infected with the fungus. There was no difference between control and experimental plots. Data collected from Willoughby Marsh indicated that there was no correlation between the proportion of larvae infected with the fungus and host population density in either experimental or control plots. About 10% of larvae collected from a nearby site, Chippawa Creek, were also positive for .E.. maimaiga suggesting that low levels of .E.. maimaiga probably occurred naturally in the area. In 1993, 9.6% of larvae were positive for NPV. Again, presence or absence of NPV infection was independent of fungal presence plot type or interaction of these two factors. In conclusion, gypsy moth population densities were highly variable between and within sites in the Niagara Region. The introduction of the pathogenic fungus, .E.. maimaiga, into Willoughby Marsh in 1992 was successful and the fungus was again evident in 1993. There was no evidence for existence of a relationship between fungal mortality and gypsy moth density or occurrence of NPV. The results from this study are discussed with respect to the use of .E.. maimaiga in gypsy moth management programs.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Blooms negatively compromise the aquatic environment, plants, animals and human health.Some species are toxin-producing, such as the neurotoxin saxitoxin and the hepatotoxin microcystin, which may contaminate water reservoirs, as those existing in the semiarid region of Rio Grande do Norte (Brazil) which are used to supply the population, fishing, aquiculture and recreational activities, thereby providing the risk of human exposure through water intake, dermal contact and respiratory tract. Thus, it is recommended a constant monitoring of the density of cyanobacteria with the quantification of cyanotoxins. One goal with this work was the monitoring of water in four reservoirs in semiarid of RN through the identification and enumeration of cyanobacteria and through the identification and quantification of cyanotoxins by ELISA. Furthermore, we intended to assess the environmental perception of farmers and artisanal fishers in reservoirs of semiarid of RN through semi-structured interviews with questions mostly related to water and eutrophication. Through these objectives the aim was the development of management strategies for aquaculture and prevention of risks to public health. The results showed that the highest values of microcystins were found in the rainy season. Standards for drinking water, according to the guidelines of Ministry of Health 2914/2011 and CONAMA 357/05, setting the maximum values for raw water density of cyanobacteria: 50,000 cel.mL-1; microcystin: 1 μg. L-1 and saxitoxin: 3 μg. L-1. The values found for microcystin ranged between 0.00227 μg. L-1 and 24.1954 μg. L-1. From 128 samples analyzed, 27% were above the limit. There was no clear seasonal pattern for saxitoxins and their values ranged between 0.003 μg. L-1 and 0.766 μg. L-1 with none of the values above the limit. Furthermore, 76% of the densities of cyanobacteria values were above the limit. About environmental perception, 52 interviews were conducted and the results show that the respondents recognize the main uses of water of the rervoirs, recognize the importance and have a positive view about the reservoirs. They also realize that the water has a poor quality and can cause health problems. The results provide data showing the persistence of cyanobacteria and cyanotoxins, many times over the limit, reinforcing the importance of constant monitoring. The assessment of environmental perception gives foundation for later proposed environmental education linked to public health management into the context of this particular population, making it more effective
Resumo:
Objective. This study evaluated the influence of estrogen deficiency and its treatment on bone density around integrated implants.Study design. Implants were placed in female rat tibiae. The animals were assigned to 5 groups: control, sham, ovariectomy, estrogen, and alendronate. The control group was humanely killed to confirm integration of the implant. The others were submitted to ovariectomy or sham surgery. Bone density was measured by digital radiographs at 6 points on sides of the implant.Results. The analysis of radiographic bone density revealed estrogen privation had a negative impact only in the cancellous bone. The estrogen group differed significantly ( P <.05) from the ovariectomy and alendronate groups. The alendronate group presented the highest density for all evaluated regions.Conclusion. Ovariectomy caused a decrease in the radiographic bone density in the cancellous region. Estrogen replacement therapy and alendronate were effective treatments in preventing bone mass loss around integrated implants.
Resumo:
A distribuição espacial e temporal da densidade e biomassa dos copépodos planctônicos Pseudodiaptomus richardi e P. acutus, ao longo de um gradiente de salinidade, foi estudada no Estuário do Rio Caeté (Norte do Brasil) durante os meses de junho e dezembro de 1998 (estação seca) e fevereiro e maio de 1999 (estação chuvosa). A biomassa dos copépodos foi estimada a partir de parâmetros da regressão baseada na relação entre o peso seco e o comprimento do corpo (prossoma) de organismos adultos. O Estuário do Rio Caeté caracterizou-se por uma grande variação espacial e sazonal na salinidade (0,8-37,2). A relação peso-comprimento para ambas as espécies de Pseudodiaptomus foi do tipo exponencial. Os valores de densidade e biomassa oscilaram entre 0,28-46,18 ind. m-3 e 0,0022-0,3507 mg DW. m-3 para P. richardi; e entre 0,01-17,02 ind. m-3 e 0,0005-0,7181 mg DW. m-3 para P. acutus. Os resultados revelaram que a contribuição de P. richardi para a produção secundária no Estuário do Rio Caeté é mais importante na zona liminética que em outras zonas onde foram dominantes os regimes eurihalino-polihalino. Contudo, para P. acutus não foi possível observar de forma clara um padrão de distribuição espacial e temporal para a área estudada.