Muro cortina modular con marco de baja transmitancia térmica integrado en el vidrio aislante a través de adhesivos estructurales = Unitised curtain wall with low thermal transmittance frame integrated within the insulating glass unit through structural adhesives

Los muros cortina modulares están constituidos por paneles prefabricados que se fijan al edificio a través de anclajes a lo largo del borde del forjado. El proceso de prefabricación garantiza buena calidad y control de los acabados y el proceso de instalación es rápido y no requiere andamiaje. Por estas razones su uso está muy extendido en torres. Sin embargo, el diseño de los marcos de aluminio podría ser más eficiente si se aprovechara la rigidez de los vidrios para reducir la profundidad estructural de los montantes. Asimismo, se podrían reducir los puentes térmicos en las juntas si se sustituyeran los marcos por materiales de menor conductividad térmica que el aluminio. Esta investigación persigue desarrollar un muro cortina alternativo que reduzca la profundidad estructural, reduzca la transmisión térmica en las juntas y permita un acabado enrasado al interior, sin que sobresalgan los montantes. La idea consiste en conectar un marco de material compuesto de fibra de vidrio a lo largo del borde del vidrio aislante a través de adhesivos estructurales para así movilizar una acción estructural compuesta entre los dos vidrios y lograr una baja transmitancia térmica. El marco ha de estar integrado en la profundidad del vidrio aislante. En una primera fase se han efectuado cálculos estructurales y térmicos preliminares para evaluar las prestaciones a un nivel esquemático. Además, se han realizado ensayos a flexión en materiales compuestos de fibra de vidrio y ensayos a cortante en las conexiones adhesivas entre vidrio y material compuesto. Con la información obtenida se ha seleccionado el material del marco y del adhesivo y se han efectuado cambios sobre el diseño original. Los análisis numéricos finales demuestran una reducción de la profundidad estructural de un 80% y una reducción de la transmisión térmica de un 6% en comparación con un sistema convencional tomado como referencia. El sistema propuesto permite obtener acabados enrasados. ABSTRACT Unitised curtain wall systems consist of pre manufactured cladding panels which can be fitted to the building via pre fixed brackets along the edge of the floor slab. They are universally used for high rise buildings because the factory controlled assembly of units ensures high quality and allows fast installation without external access. However, its frame is structurally over-dimensioned because it is designed to carry the full structural load, failing to take advantage of potential composite contribution of glass. Subsequently, it is unnecessarily deep, occupying valuable space, and protrudes to the inside, causing visual disruption. Moreover, it is generally made of high thermal conductivity metal alloys, contributing to substantial thermal transmission at joints. This research aims to develop a novel frame-integrated unitised curtain wall system that will reduce thermal transmission at joints, reduce structural depth significantly and allow an inside flush finish. The idea is to adhesively bond a Fibre Reinforced Polymer (FRP) frame to the edge of the Insulated Glass Unit (IGU), thereby achieving composite structural behaviour and low thermal transmittance. The frame is to fit within the glazing cavity depth. Preliminary analytical structural and numerical thermal calculations are carried out to assess the performance of an initial schematic design. 4-point bending tests on GFRP and single-lap shear tests on bonded connections between GFRP and glass are performed to inform the frame and adhesive material selection process and to characterise these materials. Based on the preliminary calculations and experimental tests, some changes are put into effect to improve the performance of the system and mitigate potential issues. Structural and thermal numerical analysis carried out on the final detail design confirm a reduction of the structural depth to almost one fifth and a reduction of thermal transmission of 6% compared to a benchmark conventional system. A flush glazed appearance both to the inside and the outside are provided while keeping the full functionality of a unitised system.

El recorrido: evaluación de las cualidades sensoriales y formales del medio urbano como parte de los criterios de caminabilidad. La ciudad de Taipei como caso de estudio

La presente investigación aborda el análisis de las cualidades del entorno urbano que inciden en la experiencia perceptiva de su recorrido. Los intereses que la motivan tienen que ver con la recuperación de la ciudad para el viandante y se sitúa dentro de un marco de intereses más amplio como es el de la ciudad sostenible. En primer lugar, se contextualiza el tema de la experiencia del recorrido a través de disciplinas diferentes como son el cine, la literatura, la arquitectura, el urbanismo, la arquitectura del paisaje, la psicología y la estética ambiental. De este modo, se refuerza el argumento en torno al papel que desempeñan la forma y otros estímulos sensoriales en la experiencia del espacio, ya sea éste urbano, arquitectónico o natural. La experiencia que las personas viven al desplazarse por un entorno viene definida por infinitos factores que van desde la configuración física del entorno recorrido, hasta el aprendizaje cultural de la persona que camina; desde los estímulos sensoriales que se reciben, hasta las condiciones físicas que posibilitan la funcionalidad del recorrido; desde las sutilezas de índole secuencial que se desvelan a medida que avanzamos, hasta las condiciones higrotérmicas en el momento en que se lleva a cabo el desplazamiento. Sin embargo, factores como las motivaciones y atenciones personales del que anda, así como sus recuerdos de experiencias anteriores, deseos, imaginación y estado de ánimo, también definen nuestra experiencia al caminar que, indudablemente, se encuentra ligada a nuestra personalidad y, por lo tanto, no puede ser exacta a la de otra persona. Conscientes de que todos estos factores se funden en un fenómeno global, y que no se dan en la vida por separado, nos hemos esforzado por independizar las cualidades sensoriales y formales, únicamente a efectos de investigación. La importancia del tema a investigar reside en las conexiones que existen entre las cualidades del medio construido y la experiencia cotidiana de su recorrido, en la medida en que dicha vinculación establece relaciones con la calidad de vida, la salud de los ciudadanos y sus sentimientos de identidad. En este sentido, el problema clave encontrado es que si la definición de la experiencia del recorrido urbano es demasiado amplia, se vuelve nebulosa e inoperativa, pero si se precisa demasiado, se pueden excluir variables importantes. Hemos concentrado nuestros esfuerzos en buscar un medio que permita hacer operativo el estudio de aspectos que, por su propia naturaleza, son difíciles de controlar y aplicar en la práctica. En este sentido, el campo de estudio que aúna interés en el tema, producción científica y vocación práctica, es el de la caminabilidad de las ciudades. Por esta razón, hemos situado nuestro trabajo dentro del marco de criterios que este campo establece para valorar un entorno caminable. Sin embargo, hemos detectado que los trabajos sobre caminabilidad tienden a desarrollarse dentro de la disciplina del planeamiento de transporte y, con frecuencia, siguiendo las mismas pautas que la investigación sobre el transporte motorizado. Además, la tendencia a proporcionar datos numéricos producto de la medición controlada de variables, para respaldar iniciativas dentro de los ámbitos de toma de decisiones, lleva consigo un progresivo alejamiento de los aspectos más sutiles y próximos de la experiencia de las personas y la especificidad de los lugares. Por estas razones, hemos estimado necesario profundizar en la experiencia peatonal explorando otras líneas de trabajo como son la habitabilidad de las ciudades, políticas llevadas a cabo para mejorar la calidad del espacio público o las certificaciones de sostenibilidad en el ámbito del urbanismo. También se han estudiado las aproximaciones gráficas a la representación y simulación de recorridos urbanos por su importancia en la comunicación y promoción de caminar. Para detectar las problemáticas implicadas en la definición de una herramienta que permita valorar, de manera operativa, la calidad de la experiencia del recorrido urbano, la metodología de valoración propuesta se ha basado en la combinación de distintos métodos y en la conjugación de tres aproximaciones: valoración por parte del investigador en calidad de experto, valoración realizada por el investigador en el papel de usuario y valoración por el ciudadano. El desarrollo de esta investigación se ha visto condicionado por la intención de aplicar lo estudiado en un caso práctico. El marco de criterios que los trabajos sobre caminabilidad de las ciudades establecen para que se dé un entorno caminable, se puede resumir en que concurran los siguientes factores: mezcla de usos, densidad de población y edificación relativamente altas, destinos públicos accesibles a pie, un alto grado de seguridad con respecto al tráfico y actos delictivos, alta funcionalidad (dimensiones, pendientes, etc.) y atractivo. Una vez definido el modelo de ciudad en que es pertinente realizar una investigación sobre las cualidades del entorno urbano responsables de que éste se perciba como atractivo, se escogió la ciudad de Taipei, entre otras razones, por cumplir con los requisitos restantes. Con respecto al caso práctico, el objetivo es detectar fortalezas y debilidades del área central de la ciudad de Taipei en cuanto a la experiencia perceptiva que proporciona a los viandantes. ABSTRACT This research addresses the analysis of the qualities of the urban environment that affect the perceptual experience of walking. The interests lying behind it are related to the recovery of the city for pedestrians, and is framed within the sustainable city framework of interests. Firstly, the issue of the experience of walking is contextualized through different disciplines such as film, literature, architecture, urban planning, landscape architecture, environmental psychology and aesthetics. This way, the argument about the role that form and other sensory stimuli play in the experience of space, whether it is urban, architectural or natural, is strengthened. The walking experience of people is defined by factors ranging from the physical configuration of the environment to the cultural background of the person who walks, from the sensory stimuli that are perceived to the physical conditions that enable the functionality of the walk, from the subtleties of sequential nature that are revealed as we move around to hygrothermal conditions at the specific time of walking. Nevertheless, factors such as personal motivations and attentions of the walker, as well as memories of past experiences, desires, imagination and mood, also define our walking experience that is undoubtedly linked to our personality and, therefore, it cannot be exactly the same as other people's experience. Being aware that all these factors come together in a total phenomenon and that, in real life, they do not exist separately, we focused on separating sensory and formal qualities only for research purposes. The importance of the research topic lies in the connections between the qualities of the built environment and the quotidian experience of walking through it, to the extent that such link establishes relationships with the quality of life, health and feelings of identity of citizens. In this sense, the key problem encountered is that, if the definition of urban walking experience is too broad, it becomes nebulous and non‐operational, but if it is too precise, important variables can be excluded. We concentrated our efforts on finding a way to operationalize the study of questions that, by their very nature, are difficult to control and apply in practice. In this regard, the field of study that combines interest in the topic, scientific production and practical purpose, is the walkability of cities. For this reason, we placed our work within the framework of the set of criteria that this field establishes for assessing an environment as walkable. However, we found that works on walkability tend to be developed within the discipline of transportation planning and often following the same guidelines that research on motorized transport. Furthermore, the tendency to provide numerical data as a result of the controlled measurement of variables in order to support initiatives in decision making areas, involves a progressive distancing from the proximity and the most subtle aspects of the experience of people, and from the specificity of places. For these reasons, we considered it was necessary to deepen into the study of pedestrians experience, by exploring other lines of work such as the livability of cities, implemented policies to improve the quality of the public space or sustainability certifications in urbanism. Graphic representation and simulation of urban walks are also studied due to their important role in communication and promotion of walking. In order to find the issues involved in defining a tool to assess, in an operational way, the quality of urban walking experience, the proposed assessment methodology is based on the combination of different methods and the synthesis of three approaches: assessment by the researcher as expert, assessment by the researcher playing the role of user and assessment by the citizens. The development of this research has been conditioned by our intention of applying it in a case study. The framework of criteria that works on walkability of cities set to define a walkable environment, can be summarized in the following factors: mix of uses, population and building density rather high, public destinations accessible on foot, high levels of safety in terms of traffic and crime, high functionality (dimensions, slopes, etc.) and attractiveness. After defining the model of city in which it is relevant to conduct an investigation on the qualities that are responsible of the attractiveness of the environment; Taipei City was selected because it meets the remaining requirements, among other reasons. Regarding the case study, the goal is to identify strengths and weaknesses in the central area of Taipei City in terms of the perceptual experience of pedestrians.

Junior high school occupant protection materials. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

The other side of the coin: safety of complementary and alternative medicine

Most consumers consider complementary and alternative medicine (CAM) products inherently safe. The growing simultaneous use of CAM products and pharmaceutical drugs by Australian consumers increases the risk of CAM-drug interactions. The Therapeutic Goods Administration (TGA) has a two-tier, risk-based regulatory system for therapeutic goods - CAM products are regulated as low risk products and are assessed for quality and safety; and sponsors of products must hold the evidence for any claim of efficacy made about them. Adverse reactions to CAM products can be classified as intrinsic (innate to the product), or extrinsic (where the risk is not related to the product itself, but results from the failure of good manufacturing practice). Adverse reactions to CAM practices can be classified as risks of commission (which includes removal of medical therapy) and risks of omission (which includes failure to refer when appropriate). While few systematic studies of adverse events with CAM exist, and under-reporting is likely, most CAM products and practices do not appear to present a high risk; their safety needs to be put into the perspective of wider safety issues. A priority for research is to rigorously define the risks associated with both CAM products and practices so that their potential impact on public health can be assessed.

Adaptive congestion control of DSRC vehicle networks for collaborative road safety applications

Congestion control is critical for the provisioning of quality of services (QoS) over dedicated short range communications (DSRC) vehicle networks for road safety applications. In this paper we propose a congestion control method for DSRC vehicle networks at road intersection, with the aims of providing high availability and low latency channels for high priority emergency safety applications while maximizing channel utilization for low priority routine safety applications. In this method a offline simulation based approach is used to find out the best possible configurations of message rate and MAC layer backoff exponent (BE) for a given number of vehicles equipped with DSRC radios. The identified best configurations are then used online by an roadside access point (AP) for system operation. Simulation results demonstrated that this adaptive method significantly outperforms the fixed control method under varying number of vehicles. The impact of estimation error on the number of vehicles in the network on system level performance is also investigated.

QoS guarantee with adaptive transmit power and message rate control for DSRC vehicle network based road safety applications

Quality of services (QoS) support is critical for dedicated short range communications (DSRC) vehicle networks based collaborative road safety applications. In this paper we propose an adaptive power and message rate control method for DSRC vehicle networks at road intersections. The design objective is to provide high availability and low latency channels for high priority emergency safety applications while maximizing channel utilization for low priority routine safety applications. In this method an offline simulation based approach is used to find out the best possible configurations of transmit power and message rate for given numbers of vehicles in the network. The identified best configurations are then used online by roadside access points (AP) according to estimated number of vehicles. Simulation results show that this adaptive method significantly outperforms a fixed control method. © 2011 Springer-Verlag.

Adaptive power and rate control for QoS guarantee of DSRC based collaborative road safety applications

In this paper we propose an adaptive power and message rate control method for safety applications at road intersections. The design objectives are to firstly provide guaranteed QoS support to both high priority emergency safety applications and low priority routine safety applications and secondly maximize channel utilization. We use an offline simulation based approach to find out the best possible configurations of transmit power and message rate for given numbers of vehicles in the network with certain safety QoS requirements. The identified configurations are then used online by roadside access points (AP) adaptively according to estimated number of vehicles. Simulation results show that this adaptive method could provide required QoS support to safety applications and it significantly outperforms a fixed control method. © 2013 International Information Institute.

Effects of architectural features of air-permeable roof cladding materials on wind-induced uplift loading

Widespread damage to roofing materials (such as tiles and shingles) for low-rise buildings, even for weaker hurricanes, has raised concerns regarding design load provisions and construction practices. Currently the building codes used for designing low-rise building roofs are mainly based on testing results from building models which generally do not simulate the architectural features of roofing materials that may significantly influence the wind-induced pressures. Full-scale experimentation was conducted under high winds to investigate the effects of architectural details of high profile roof tiles and asphalt shingles on net pressures that are often responsible for damage to these roofing materials. Effects on the vulnerability of roofing materials were also studied. Different roof models with bare, tiled, and shingled roof decks were tested. Pressures acting on both top and bottom surfaces of the roofing materials were measured to understand their effects on the net uplift loading. The area-averaged peak pressure coefficients obtained from bare, tiled, and shingled roof decks were compared. In addition, a set of wind tunnel tests on a tiled roof deck model were conducted to verify the effects of tiles' cavity internal pressure. Both the full-scale and the wind tunnel test results showed that underside pressure of a roof tile could either aggravate or alleviate wind uplift on the tile based on its orientation on the roof with respect to the wind angle of attack. For shingles, the underside pressure could aggravate wind uplift if the shingle is located near the center of the roof deck. Bare deck modeling to estimate design wind uplift on shingled decks may be acceptable for most locations but not for field locations; it could underestimate the uplift on shingles by 30-60%. In addition, some initial quantification of the effects of roofing materials on wind uplift was performed by studying the wind uplift load ratio for tiled versus bare deck and shingled versus bare deck. Vulnerability curves, with and without considering the effects of tiles' cavity internal pressure, showed significant differences. Aerodynamic load provisions for low-rise buildings' roofs and their vulnerability can thus be more accurately evaluated by considering the effects of the roofing materials.

De repente, tudo mudou de lugar: refletindo sobre metamorfose urbana e gentrificação em Mossoró-RN

This study aims at solidifying the theoretical bases to provide, above all, an explanation for this phenomenon which currently happens, with a scenario of social, political, economic and cultural transformations worldwide in medium cities. Nevertheless, because it has different dimensions from its transformation axes, gentrification comes with change, but also with the introduction of a new purpose in the space using and occupation, outlining in this context the identity of places from the formation of centralities with the presence of flows with social and economic dynamicsThe current forms of geographic space appropriation show the directions of the senses and ideological profile which recreates the meanings and uses of content and materials from descriptions of a historical past. However, today there is an economic context in the urban space which refers to a search of strategies for change, i.e., the acquisition of parameter aimed at meeting the demands of the relationship between capital and labor, which ends up overriding some actions for the specification of the transformation methods within the urban space to be explained by new needs and also by the agents from the value adding to their interests and investments. Thus, we assume that the appreciation/gentrification of urban spaces may or may not result from the building of a public space, since the dialogic structure as a place of political interaction externalize conflicts and disagreements in general; it keeps segregating spaces. As new spaces are transformed, the access to them tends to happen with particular restriction, whereas some places like parks, shopping malls, high-rise and horizontal condos are the scene for major professional and family events. In this context, the gentrification process is used to designate interventions in the urban environment, in certain city spaces which are considered central to public and private investments. A historical place is permitted to be presented as a scenario, a stage full of attractions, through the transformation process. Studying gentrification consists of an analysis of the underlying interests in the transformation of these areas, and especially of the assessment of the interest level in the private sector to partner in order to modify the landscape. Gentrification results from the transformation processes of capital, which influences the efforts and investments application in order to establish and achieve optimal economic growth, focusing on a location socio-culturally centered in the urban space. Thus, the urban social structure develops in the light of some questions that relate not only the cities growth but also environmental conditions it provides in cities like Mossoro, State of Rio Grande do Norte, Brazil 2005 a 2011.

Adequação bioclimática para os espaços urbanos abertos do centro de Fortaleza, CE

This research presents a study investigating the correlation between the environmental-physycal charcateristics of cities and the formation of its micro-climates. The study was conducted in the central area of Fortaleza characterized as a stable and consolidated area, where the city originated and currently faces serious problems in its urban dynamics. The points of measurements were determined by the elaboration and analysis of topography maps, height of buildings, land use, type of surface coating and vegetation, following the methodology of Katzschner (1997). A zoning map was then determined, according to common morphological characteristics of the 12 measurement points, which were based on a set of Romero s (2001) bioclimatic criteria. Air measurements, temperature, humidity, intensity and direction of winds were made in transect form in two different circuits in the study area, with six points of data collection in each area, in three different times: 6:00 am, 1:00pm and 7:00pm, during two periods of the year: August 2008 and March 2009. The results verified the influence of different environmental-physical types in the behavior of the climatic variables that were collected. A verticalização tão condenada em algumas situações se bem equilibrada e controlada pode reduzir as temperaturas do ar através do sombreamento dos espaços urbanos e possibilidade de maior permeabilidade a ventilação natural. The highest average air temperature and lower humidity were recorded at the point I at all times. This situation may have been in result of the high density, poor vegetation and extended paving of the ground. According to the results, it s clear the positive influence vegetation has on easing air temperature. Another indicator observed that areas with a greater variation in building heights tend to present decreased average air temperature. High rise structure, planned in accordance to urban air quality parameters, can reduce air temperatures by the shading of urban spaces and the possibility of greater penetration of natural ventilation

De repente, tudo mudou de lugar: refletindo sobre metamorfose urbana e gentrificação em Mossoró-RN

This study aims at solidifying the theoretical bases to provide, above all, an explanation for this phenomenon which currently happens, with a scenario of social, political, economic and cultural transformations worldwide in medium cities. Nevertheless, because it has different dimensions from its transformation axes, gentrification comes with change, but also with the introduction of a new purpose in the space using and occupation, outlining in this context the identity of places from the formation of centralities with the presence of flows with social and economic dynamicsThe current forms of geographic space appropriation show the directions of the senses and ideological profile which recreates the meanings and uses of content and materials from descriptions of a historical past. However, today there is an economic context in the urban space which refers to a search of strategies for change, i.e., the acquisition of parameter aimed at meeting the demands of the relationship between capital and labor, which ends up overriding some actions for the specification of the transformation methods within the urban space to be explained by new needs and also by the agents from the value adding to their interests and investments. Thus, we assume that the appreciation/gentrification of urban spaces may or may not result from the building of a public space, since the dialogic structure as a place of political interaction externalize conflicts and disagreements in general; it keeps segregating spaces. As new spaces are transformed, the access to them tends to happen with particular restriction, whereas some places like parks, shopping malls, high-rise and horizontal condos are the scene for major professional and family events. In this context, the gentrification process is used to designate interventions in the urban environment, in certain city spaces which are considered central to public and private investments. A historical place is permitted to be presented as a scenario, a stage full of attractions, through the transformation process. Studying gentrification consists of an analysis of the underlying interests in the transformation of these areas, and especially of the assessment of the interest level in the private sector to partner in order to modify the landscape. Gentrification results from the transformation processes of capital, which influences the efforts and investments application in order to establish and achieve optimal economic growth, focusing on a location socio-culturally centered in the urban space. Thus, the urban social structure develops in the light of some questions that relate not only the cities growth but also environmental conditions it provides in cities like Mossoro, State of Rio Grande do Norte, Brazil 2005 a 2011.

Adequação bioclimática para os espaços urbanos abertos do centro de Fortaleza, CE

This research presents a study investigating the correlation between the environmental-physycal charcateristics of cities and the formation of its micro-climates. The study was conducted in the central area of Fortaleza characterized as a stable and consolidated area, where the city originated and currently faces serious problems in its urban dynamics. The points of measurements were determined by the elaboration and analysis of topography maps, height of buildings, land use, type of surface coating and vegetation, following the methodology of Katzschner (1997). A zoning map was then determined, according to common morphological characteristics of the 12 measurement points, which were based on a set of Romero s (2001) bioclimatic criteria. Air measurements, temperature, humidity, intensity and direction of winds were made in transect form in two different circuits in the study area, with six points of data collection in each area, in three different times: 6:00 am, 1:00pm and 7:00pm, during two periods of the year: August 2008 and March 2009. The results verified the influence of different environmental-physical types in the behavior of the climatic variables that were collected. A verticalização tão condenada em algumas situações se bem equilibrada e controlada pode reduzir as temperaturas do ar através do sombreamento dos espaços urbanos e possibilidade de maior permeabilidade a ventilação natural. The highest average air temperature and lower humidity were recorded at the point I at all times. This situation may have been in result of the high density, poor vegetation and extended paving of the ground. According to the results, it s clear the positive influence vegetation has on easing air temperature. Another indicator observed that areas with a greater variation in building heights tend to present decreased average air temperature. High rise structure, planned in accordance to urban air quality parameters, can reduce air temperatures by the shading of urban spaces and the possibility of greater penetration of natural ventilation

The next step in energy rating: the international ETTV method vs. BCA Section-J glazing calculator

The most important prevention in minimizing energy transfer in commercial buildings is the treatment of glazing in the building facade. In a commercial building, while the impacts of roof, walls and floors on the overall heating and cooling loads of the building have low effects, glazing is likely to be the most important factor. This paper investigates the BCA Section-J glazing calculator and the ETTV (Envelope Thermal Transfer Value) methods and tries to look for differences as well as similarities in calculation of building envelopes energy performance. For this investigation, a hypothetical high-rise commercial building in Melbourne, Australia is considered when evaluating the energy performance of the envelope through these two methods. Both methods consider the U-Value of glass and wall materials as well as Solar Heat Gain Coefficient (SHGC) and Shading Coefficient (SC) of the glass. Findings in this research project indicate differences and significant discrepancies between the BCA Section-J and ETTV methods in evaluating the energy performance of commercial building façades. Issues of calculation weaknesses are identified with the lack of air leakage and infiltration of a particular façade design or window to wall ratio (WWR). Suggestions have been made where improvement to the overall energy calculation through facades of a commercial building is needed.

Evaluation of numerical procedures to determine seismic response of structures under influence of soil-structure interaction

In this study, the accuracy and reliability of fully nonlinear method against equivalent linear method for dynamic analysis of soil-structure interaction is investigated comparing the predicted results of both numerical procedures with the results of experimental shaking table tests. An enhanced numerical soil-structure model has been developed which treats the behaviour of the soil and the structure with equal rigour. The soil-structural model comprises a 15 storey structural model resting on a soft soil inside a laminar soil container. The structural model was analysed under three different conditions: (i) fixed base model performing conventional time history dynamic analysis, (ii) flexible base model (considering full soil-structure interaction) conducting equivalent linear dynamic analysis, and (iii) flexible base model performing fully nonlinear dynamic analysis. The results of the above mentioned three cases in terms of lateral storey deflections and inter-storey drifts are determined and compared with the experimental results of shaking table tests. Comparing the experimental results with the numerical analysis predictions, it is noted that equivalent linear method of dynamic analysis underestimates the inelastic seismic response of mid-rise moment resisting building frames resting on soft soils in comparison to the fully nonlinear dynamic analysis method. Thus, inelastic design procedure, using equivalent linear method, cannot adequately guarantee the structural safety for mid-rise building frames resting on soft soils. However, results obtained from the fully nonlinear method of analysis fit the experimental results reasonably well. Therefore, this method is recommended to be used by practicing engineers.