The effects of mass loading the ossicles with a floating mass transducer on middle ear transfer function

Hypothesis: The aim of this study was to measure the mass loading effect of an active middle-ear implant (the Vibrant Soundbridge) in cadaver temporal bones. Background: Implantable middle ear hearing devices such as Vibrant Soundbridge have been used as an alternative to conventional hearing aids for the rehabilitation of sensorineural hearing loss. Other than the obvious disadvantage of requiring implantation middle ear surgery, it also applies a direct weight on the ossicular chain which, in turn, may have an impact on residual hearing. Previous studies have shown that applying a mass directly on the ossicular chain has a damping effect on its response to sound. However, little has been done to investigate the magnitude and the frequency characteristics of the mass loading effect in devices such as the Vibrant Soundbridge. Methods: Five fresh cadaver temporal bones were used. The stapes displacement was measured using laser Doppler vibrometry before and after the placement of a Vibrant Sound-bridge floating mass transducer. The effects of mass and attachment site were compared with the unloaded response. Measurements were obtained at frequencies between 0.1 and 10 kHz and at acoustic input levels of 100 dB sound pressure level. Each temporal bone acted as its own control. Results: Placement of the floating mass transducer caused a reduction of the stapes displacement. There were variations between the bones. The change of the stapes displacement varied from 0 dB to 28 dB. The effect was more prominent at frequencies above 1,000 Hz. Placing the floating mass transducer close to the incudostapedial joint reduced the mass loading effect. Conclusion: The floating mass transducer produces a measurable reduction of the stapes displacement in the temporal bone model. The effect is more prominent at high frequencies.

Evidence for the chaotic origin of Northern Annular Mode variability

Exponential spectra are found to characterize variability of the Northern Annular Mode (NAM) for periods less than 36 days. This corresponds to the observed rounding of the autocorrelation function at lags of a few days. The characteristic persistence timescales during winter and summer is found to be ∼5 days for these high frequencies. Beyond periods of 36 days the characteristic decorrelation timescale is ∼20 days during winter and ∼6 days in summer. We conclude that the NAM cannot be described by autoregressive models for high frequencies; the spectra are more consistent with low-order chaos. We also propose that the NAM exhibits regime behaviour, however the nature of this has yet to be identified.

The equatorial response to higher latitude forcing

The classic view, following Charney and Webster and Holton, is that significant midlatitude forcing of the Tropics can be expected only in regions with westerly winds in the upper troposphere because it is only in these regions that stationary Rossby waves will be able to propagate toward the equator. Here it is shown that higherlatitude forcing can project directly onto equatorial waves and give a significant tropical response in both easterly and westerly tropical flow. The equatorial response to higher-latitude forcing is considered in the context of a dry atmosphere and a localized higher-latitude forcing with eastward or westward phase speed. Previous ideas of the Doppler shifting of equatorial waves by zonal flows are extended to include consideration of a forcing involving a range of zonal wavenumbers. A Gill-type model suggests that there can be significant forcing of equatorial waves by either vorticity forcing or heating in higher latitudes. In agreement with the theory, the Kelvin wave response to eastward forcing is peaked at high frequencies/short periods but reduces only slowly with decreasing frequency. Primitive-equation experiments confirm the strong equatorial response associated with a deep Kelvin wave for forcing in midlatitudes. The response is strongest in the Eastern Hemisphere with its equatorial, upper-tropospheric easterlies. The possible importance of this equatorial response in the organization of large-scale, deep tropical convection and the initiation of the Madden–Julian oscillation is discussed. The ability of westward forcing in higher latitudes to trigger Rossby–gravity and Rossby waves is found in the primitive-equation model to be significant but rather less robust. These wave signatures are clearest in the lower troposphere. For shorter periods the Rossby–gravity wave dominates, and for upper-tropospheric forcing, downward and eastward wave activity propagation is seen. Upper-tropospheric westerlies are found to enhance the response.

Croig Cave: a late Bronze Age ornament deposition and 3,500 years of coastal foraging in NW Mull, Scotland

Activity within caves provides an important element of the later prehistoric and historic settlement pattern of western Scotland. This contribution reports on a small-scale excavation within Croig Cave, on the coast of north-west Mull, that exposed a 1.95m sequence of midden deposits and cave floors that dated bewteen c 1700 BC and AD 1400. Midden analysis indicated the processing of a .... 950 BC, a penannular copper bracelet a discrete ritual episode within the cycle of otherwise potentially mundane activities. Lead isotope analysis indicates an Irish origin for the copper ore. A piece of iron slag within later midden deposits, dated to c 400 BC, along with high frequencies of wood charcoal, suggest that smithing or smelting may have occurred within the cave. High zinc levels in the historic levels of the midden c AD 1200 might indicate intensive processing of seaweed.

Transition from an anti-phase error-correction-mode to a synchronization mode in the mutual hand tracking

Proactive motion in hand tracking and in finger bending, in which the body motion occurs prior to the reference signal, was reported by the preceding researchers when the target signals were shown to the subjects at relatively high speed or high frequencies. These phenomena indicate that the human sensory-motor system tends to choose an anticipatory mode rather than a reactive mode, when the target motion is relatively fast. The present research was undertaken to study what kind of mode appears in the sensory-motor system when two persons were asked to track the hand position of the partner with each other at various mean tracking frequency. The experimental results showed a transition from a mutual error-correction mode to a synchronization mode occurred in the same region of the tracking frequency with that of the transition from a reactive error-correction mode to a proactive anticipatory mode in the mechanical target tracking experiments. Present research indicated that synchronization of body motion occurred only when both of the pair subjects operated in a proactive anticipatory mode. We also presented mathematical models to explain the behavior of the error-correction mode and the synchronization mode.

Analytical calculation of resonant inductance for zero voltage switching in phase-shifted full-bridge converters

The phase shift full bridge (PSFB) converter allows high efficiency power conversion at high frequencies through zero voltage switching (ZVS); the parasitic drain-to-source capacitance of the MOSFET is discharged by a resonant inductance before the switch is gated resulting in near zero turn-on switching losses. Typically, an extra inductance is added to the leakage inductance of a transformer to form the resonant inductance necessary to charge and discharge the parasitic capacitances of the PSFB converter. However, many PSFB models do not consider the effects of the magnetizing inductance or dead-time in selecting the resonant inductance required to achieve ZVS. The choice of resonant inductance is crucial to the ZVS operation of the PSFB converter. Incorrectly sized resonant inductance will not achieve ZVS or will limit the load regulation ability of the converter. This paper presents a unique and accurate equation for calculating the resonant inductance required to achieve ZVS over a wide load range incorporating the effects of the magnetizing inductance and dead-time. The derived equations are validated against PSPICE simulations of a PSFB converter and extensive hardware experimentations.

Runge-Kutta IMEX schemes for the Horizontally Explicit/Vertically Implicit (HEVI) solution of wave equations

Many operational weather forecasting centres use semi-implicit time-stepping schemes because of their good efficiency. However, as computers become ever more parallel, horizontally explicit solutions of the equations of atmospheric motion might become an attractive alternative due to the additional inter-processor communication of implicit methods. Implicit and explicit (IMEX) time-stepping schemes have long been combined in models of the atmosphere using semi-implicit, split-explicit or HEVI splitting. However, most studies of the accuracy and stability of IMEX schemes have been limited to the parabolic case of advection–diffusion equations. We demonstrate how a number of Runge–Kutta IMEX schemes can be used to solve hyperbolic wave equations either semi-implicitly or HEVI. A new form of HEVI splitting is proposed, UfPreb, which dramatically improves accuracy and stability of simulations of gravity waves in stratified flow. As a consequence it is found that there are HEVI schemes that do not lose accuracy in comparison to semi-implicit ones. The stability limits of a number of variations of trapezoidal implicit and some Runge–Kutta IMEX schemes are found and the schemes are tested on two vertical slice cases using the compressible Boussinesq equations split into various combinations of implicit and explicit terms. Some of the Runge–Kutta schemes are found to be beneficial over trapezoidal, especially since they damp high frequencies without dropping to first-order accuracy. We test schemes that are not formally accurate for stiff systems but in stiff limits (nearly incompressible) and find that they can perform well. The scheme ARK2(2,3,2) performs the best in the tests.

A frequency-independent boundary element method for scattering by two-dimensional screens and apertures

We propose and analyse a hybrid numerical–asymptotic hp boundary element method (BEM) for time-harmonic scattering of an incident plane wave by an arbitrary collinear array of sound-soft two-dimensional screens. Our method uses an approximation space enriched with oscillatory basis functions, chosen to capture the high-frequency asymptotics of the solution. We provide a rigorous frequency-explicit error analysis which proves that the method converges exponentially as the number of degrees of freedom N increases, and that to achieve any desired accuracy it is sufficient to increase N in proportion to the square of the logarithm of the frequency as the frequency increases (standard BEMs require N to increase at least linearly with frequency to retain accuracy). Our numerical results suggest that fixed accuracy can in fact be achieved at arbitrarily high frequencies with a frequency-independent computational cost, when the oscillatory integrals required for implementation are computed using Filon quadrature. We also show how our method can be applied to the complementary ‘breakwater’ problem of propagation through an aperture in an infinite sound-hard screen.

Attenuation and damping of electromagnetic fields: influence of inertia and displacement current

New results for attenuation and damping of electromagnetic fields in rigid conducting media are derived under the conjugate influence of inertia due to charge carriers and displacement current. Inertial effects are described by a relaxation time for the current density in the realm of an extended Ohm`s law. The classical notions of poor and good conductors are rediscussed on the basis of an effective electric conductivity, depending on both wave frequency and relaxation time. It is found that the attenuation for good conductors at high frequencies depends solely on the relaxation time. This means that the penetration depth saturates to a minimum value at sufficiently high frequencies. It is also shown that the actions of inertia and displacement current on damping of magnetic fields are opposite to each other. That could explain why the classical decay time of magnetic fields scales approximately as the diffusion time. At very small length scales, the decay time could be given either by the relaxation time or by a fraction of the diffusion time, depending on whether inertia or displacement current, respectively, would prevail on magnetic diffusion.

How does a riverine setting affect the lifestyle of shellmound builders in Brazil?

The contact of inland and coastal prehistoric groups in Brazil is believed to have been restricted to regions with no geographical barrier, as is the case in the Ribeira de Iguape valley. The inland osteological collection from the riverine shellmound Moraes (5800-4500 BP) represents a unique opportunity to test this assumption for this region. Despite cultural similarities between riverine and coastal shellmounds, important ecological and site distribution differences are expected to impact on lifestyle. The purpose of this study is thus to document and interpret health and lifestyle indicators in Moraes in comparison to coastal shellmound groups. Specifically we test if the rare evidence of fish and mollusc remains in the riverine shellmound led to (a) higher caries rates and (b) lower auditory exostosis frequency and (c) if the small size of the riverine shellmound translates into reduced demographic density and thus rarity of communicable infectious diseases. Of the three hypotheses, (a) was confirmed, (b) was rejected and (c) was partly rejected. Bioanthropological similarities between Moraes and coastal shellmounds include auditory exostoses with equally high frequencies; significantly more frequent osteoarthritis in upper than in lower limbs; cranial and dental morphological affinities and low frequencies of violent trauma. However, there are also important differences: Moraes subsisted on a much broader protein diet and consumed more cariogenic food, but showed a stature even shorter than coastal groups. Thus, despite the contact also suggested by treponematoses in both site types, there was enough time for the people at the riverine site to adapt to local conditions. (c) 2008 Elsevier GmbH. All rights reserved.

Effects of fragmented habitat and fire on the distribution and ecology of the swamp antechinus (Antechinus minimus maritimus) in the Eastern Otways, Victoria

This study investigated the distribution, habitat and population dynamics of the swamp antechinus (Antechinus minimus maritimus) in the eastern Otway Ranges. The species has a restricted, disjunct distribution and has been recorded at 25 sites between 1969 and 1999. All sites were located within 7 km of the coast, occurred at altitudes up to 80 m above sea level and within 10 m of a gully. Analysis of landscape site variables identified sun index as being significant in determination of the probability of occurrence of A. minimus. The presence of A. minimus is negatively associated with sun index, occuring at sites that have a southerly aspect and gentle slope. A. minimus was located in a range of structural vegetation including Open Forest, Low Woodland, Shrubland and Hummock Grassland and a number of floristic groups, some characterised by high frequencies of sclerophyll shrubs, others by high frequencies of Pteridium esculentum, hummock grasses and herbaceous species. A. minimus occurs in fragmented, small populations with maximum population densities of 1.1–18 ha^–1. Populations at inland sites became extinct after the 1983 wildfire which burnt 41 000 ha. These sites have not been recolonised since, while on the coast the species did not re-establish until 1993–97. One population that is restricted to a narrow coastal strip of habitat is characterised by high levels of transient animals. The species is subject to extinction in the region due to habitat fragmentation, coastal developments and fire. Management actions to secure the present populations and ensure long-term survival of the species in the area are required and include implementation of appropriate fire regimes, prevention of habitat fragmentation, revegetation of habitat, and establishment of corridor habitat.

Monaural sound localization : mechanisms and processes

A review of the literature established that localization acuity measured during monaural listening conditions was directly related to various methodological considerations. These included method of attenuation, segment of auditory space where monaural localization was measured, and the presence or absence of head movements. An extensive measurement of monaural localization was made with due consideration of these factors, allowing a more comprehensive evaluation of monaural acuity and the underlying processes that were involved. Establishing a monaural condition is dependent both on the attenuation level of the occluded ear and the signal level, both of which are clearly inter-related since the attenuation level of the occluded ear sets the maximum level of die stimulus. In a series of experiments it was established that there was a minimum signal level for accurate localization. Testing on both sides of the head revealed that there were three regions of monaural localization acuity. The first was about the interaural axis on the ipsilateral ear where monaural localization was relatively accurate, the second a region either side of the MSP where there was some loss of localization, and a third about the interaural axis on the ipsilateral side where virtually no monaural localization ability existed. In the final series of experiments it was established that head-movements allowed subjects to extend the accuracy of the first region by minimizing the distance between the sound and the ipsilateral interaural axis, thus compensating for the loss of localization ability in the second and third regions. This was determined from changes recorded in the error data, and also the extent and direction of measured head-movements. The results of this series of experiments demonstrated the relationship between spectral cues and monaural localization. Firstly, monaural localization was not possible in the absence of accurate spectral information. Thus large errors were observed in the third region where there was blockage of the high-frequencies by the head, and in all regions during the presentation of low signal levels where the high-frequencies fell below threshold. Secondly, the inaccuracy of the second region due to the loss of information from the second pinna suggested that there was a binaural component with relation to pinna cues. It seems that for sounds in this region the spectral modifications from both pinnae are processed to determine a sound's location in space.

Copy number variation and transposable elements feature in recent, ongoing adaptation at the Cyp6g1 locus

The increased transcription of the Cyp6g1 gene of Drosophila melanogaster, and consequent resistance to insecticides such as DDT, is a widely cited example of adaptation mediated by cis-regulatory change. A fragment of an Accord transposable element inserted upstream of the Cyp6g1 gene is causally associated with resistance and has spread to high frequencies in populations around the world since the 1940s. Here we report the existence of a natural allelic series at this locus of D. melanogaster, involving copy number variation of Cyp6g1, and two additional transposable element insertions (a P and an HMS-Beagle). We provide evidence that this genetic variation underpins phenotypic variation, as the more derived the allele, the greater the level of DDT resistance. Tracking the spatial and temporal patterns of allele frequency changes indicates that the multiple steps of the allelic series are adaptive. Further, a DDT association study shows that the most resistant allele, Cyp6g1-[BP], is greatly enriched in the top 5% of the phenotypic distribution and accounts for ~16% of the underlying phenotypic variation in resistance to DDT. In contrast, copy number variation for another candidate resistance gene, Cyp12d1, is not associated with resistance. Thus the Cyp6g1 locus is a major contributor to DDT resistance in field populations, and evolution at this locus features multiple adaptive steps occurring in rapid succession.

Low cost BIST techniques for linear and non-linear analog circuits

With the ever increasing demands for high complexity consumer electronic products, market pressures demand faster product development and lower cost. SoCbased design can provide the required design flexibility and speed by allowing the use of IP cores. However, testing costs in the SoC environment can reach a substantial percent of the total production cost. Analog testing costs may dominate the total test cost, as testing of analog circuits usually require functional verification of the circuit and special testing procedures. For RF analog circuits commonly used in wireless applications, testing is further complicated because of the high frequencies involved. In summary, reducing analog test cost is of major importance in the electronic industry today. BIST techniques for analog circuits, though potentially able to solve the analog test cost problem, have some limitations. Some techniques are circuit dependent, requiring reconfiguration of the circuit being tested, and are generally not usable in RF circuits. In the SoC environment, as processing and memory resources are available, they could be used in the test. However, the overhead for adding additional AD and DA converters may be too costly for most systems, and analog routing of signals may not be feasible and may introduce signal distortion. In this work a simple and low cost digitizer is used instead of an ADC in order to enable analog testing strategies to be implemented in a SoC environment. Thanks to the low analog area overhead of the converter, multiple analog test points can be observed and specific analog test strategies can be enabled. As the digitizer is always connected to the analog test point, it is not necessary to include muxes and switches that would degrade the signal path. For RF analog circuits, this is specially useful, as the circuit impedance is fixed and the influence of the digitizer can be accounted for in the design phase. Thanks to the simplicity of the converter, it is able to reach higher frequencies, and enables the implementation of low cost RF test strategies. The digitizer has been applied successfully in the testing of both low frequency and RF analog circuits. Also, as testing is based on frequency-domain characteristics, nonlinear characteristics like intermodulation products can also be evaluated. Specifically, practical results were obtained for prototyped base band filters and a 100MHz mixer. The application of the converter for noise figure evaluation was also addressed, and experimental results for low frequency amplifiers using conventional opamps were obtained. The proposed method is able to enhance the testability of current mixed-signal designs, being suitable for the SoC environment used in many industrial products nowadays.

A Modular and digitally programmable interface based on band-pass sigma-delta modulator for mixed-signal systems-on-chip

The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.