Optimizing mixing during the sponge cake manufacturing process

Sponge cakes have traditionally been manufactured using multistage mixing methods to enhance potential foam formation by the eggs. Today, use of all-in (single-stage) mixing methods is superseding multistage methods for large-scale batter preparation to reduce costs and production time. In this study, multistage and all-in mixing procedures and three final high-speed mixing times (3, 5, and 15 min) for sponge cake production were tested to optimize a mixing method for pilot-scale research. Mixing for 3 min produced batters with higher relative density values than did longer mixing times. These batters generated well-aerated cakes with high volume and low hardness. In contrast, after 5 and 15 min of high-speed mixing, batters with lower relative density and higher viscosity values were produced. Although higher bubble incorporation and retention were observed, longer mixing times produced better developed gluten networks, which stiffened the batters and inhibited bubble expansion during mixing. As a result, these batters did not expand properly and produced cakes with low volume, dense crumb, and high hardness values. Results for all-in mixing were similar to those for the multistage mixing procedure in terms of the physical properties of batters and cakes (i.e., relative density, elastic moduli, volume, total cell area, hardness, etc.). These results suggest the all-in mixing procedure with a final high-speed mixing time of 3 min is an appropriate mixing method for pilot-scale sponge cake production. The advantages of this method are reduced energy costs and production time.

Endotoxin levels correlate positively with a sedentary lifestyle and negatively with highly trained subjects

Introduction: A sedentary lifestyle increases the risk of developing cardiovascular disease, obesity, and diabetes. This phenomenon is supported by recent studies suggesting a chronic, low-grade inflammation status. Endotoxin derived from gut flora may be key to the development of inflammation by stimulating the secretion of inflammatory factors. This study aimed to examine plasma inflammatory markers and endotoxin levels in individuals with a sedentary lifestyle and/or in highly trained subjects at rest. Methods: Fourteen male subjects (sedentary lifestyle n = 7; highly trained subjects n = 7) were recruited. Blood samples were collected after an overnight fast (similar to 12 h). The plasmatic endotoxin, plasminogen activator inhibitor type-1 (PAI-1), monocyte chemotactic protein-1 (MCP1), ICAM/CD54, VCAM/CD106 and lipid profile levels were determined. Results: Endotoxinemia was lower in the highly trained subject group relative to the sedentary subjects (p < 0.002). In addition, we observed a positive correlation between endotoxin and PAI-1 (r = 0.85, p < 0.0001), endotoxin and total cholesterol (r = 0.65; p < 0.01), endotoxin and LDL-c (r = 0.55; p < 0.049) and endotoxin and TG levels (r = 0.90; p < 0.0001). The plasma levels of MCP-1, ICAM/CD54 and VCAM/CD106 did not differ. Conclusion: These results indicate that a lifestyle associated with high-intensity and high-volume exercise induces favorable changes in chronic low-grade inflammation markers and may reduce the risk for diseases such as obesity, diabetes and cardiovascular diseases.

Aerosol inorganic composition at a tropical site: Discrepancies between filter-based sampling and a semi-continuous method

The concentrations of the water-soluble inorganic aerosol species, ammonium (NH4+), nitrate (NO3-), chloride (Cl-), and sulfate (SO42-), were measured from September to November 2002 at a pasture site in the Amazon Basin (Rondnia, Brazil) (LBA-SMOCC). Measurements were conducted using a semi-continuous technique (Wet-annular denuder/Steam-Jet Aerosol Collector: WAD/SJAC) and three integrating filter-based methods, namely (1) a denuder-filter pack (DFP: Teflon and impregnated Whatman filters), (2) a stacked-filter unit (SFU: polycarbonate filters), and (3) a High Volume dichotomous sampler (HiVol: quartz fiber filters). Measurements covered the late dry season (biomass burning), a transition period, and the onset of the wet season (clean conditions). Analyses of the particles collected on filters were performed using ion chromatography (IC) and Particle-Induced X-ray Emission spectrometry (PIXE). Season-dependent discrepancies were observed between the WAD/SJAC system and the filter-based samplers. During the dry season, when PM2.5 (D-p <= 2.5 mu m) concentrations were similar to 100 mu g m(-3), aerosol NH4+ and SO42- measured by the filter-based samplers were on average two times higher than those determined by the WAD/SJAC. Concentrations of aerosol NO3- and Cl- measured with the HiVol during daytime, and with the DFP during day- and nighttime also exceeded those of the WAD/SJAC by a factor of two. In contrast, aerosol NO3- and Cl- measured with the SFU during the dry season were nearly two times lower than those measured by the WAD/SJAC. These differences declined markedly during the transition period and towards the cleaner conditions during the onset of the wet season (PM2.5 similar to 5 mu g m(-3)); when filter-based samplers measured on average 40-90% less than the WAD/SJAC. The differences were not due to consistent systematic biases of the analytical techniques, but were apparently a result of prevailing environmental conditions and different sampling procedures. For the transition period and wet season, the significance of our results is reduced by a low number of data points. We argue that the observed differences are mainly attributable to (a) positive and negative filter sampling artifacts, (b) presence of organic compounds and organosulfates on filter substrates, and (c) a SJAC sampling efficiency of less than 100%.

Mutagenicity and DNA adduct formation of PAH, nitro-PAH, and oxy-PAH fractions of atmospheric particulate matter from Sao Paulo, Brazil

Urban particulate matter (UPM) contributes to lung cancer incidence. Here, we have studied the mutagenic activity and DNA adduct-forming ability of fractionated UPM extractable organic matter (EOM). UPM was collected with a high-volume sampler in June 2004 at two sites, one at street level adjacent to a roadway and the other inside a park within the urban area of the city of Sao Paulo, Brazil. UPM was extracted using dichloromethane, and the resulting EOM was separated by HPLC to obtain PAH, nitro-PAH, and oxy-PAH fractions which were tested for mutagenicity with the Salmonella strains TA98 and YG1041 with and without S9 metabolic activation. The PAH fraction from both sites showed negligible mutagenic activity in both strains. The highest mutagenic activity was found for the nitro-PAH fraction using YG1041 without metabolic activation; however, results were comparable for both sites. The nitro-PAH and oxy-PAH fractions were incubated with calf thymus DNA under reductive conditions appropriate for the activation of nitro aromatic compounds, then DNA adduct patterns and levels were determined with thin-layer chromatography (TLC) (32)p-postlabeling method using two enrichment procedures-nuclease PI digestion and butanol extraction. Reductively activated fractions from both sites produced diagonal radioactive zones (DRZ) of putative aromatic DNA adducts on thin layer plates with both enrichment procedures. No such DRZ were observed in control experiments using fractions from unexposed filters or from incubations without activating system. Total adduct levels produced by the nitro-PAH fractions were similar for both sites ranging from 30 to 45 adducts per 10(8) normal nucleotides. In contrast, the DNA binding of reductively activated oxy-PAH fractions was three times higher and the adduct pattern consisted of multiple discrete spots along the diagonal line on the thin layer plates. However, DNA adduct levels were not significantly different between the sampling sites. Both samples presented the same levels of mutagenic activity. The response in the Salmonella assay was typical of nitroaromatics. Although, more mutagenic activity was related to the nitro-PAH fraction in the Salmonella assay, the oxy-PAH fractions showed the highest DNA adduct levels. More studies are needed to elucidate the nature of the genotoxicants occurring in Sao Paulo atmospheric samples. (C) 2008 Elsevier B.V. All rights reserved.

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

Two simulative test methods were used to study galling in sheet forming of two types of stainlesssteel sheet: austenitic (EN 1.4301) and lean duplex LDX 2101 (EN 1.4162) in different surface conditions. Thepin-on-disc test was used to analyse the galling resistance of different combinations of sheet materials and lubricants. The strip reduction test, a severe sheet forming tribology test was used to simulate the conditionsduring ironing. This investigation shows that the risk of galling is highly dependent on the surface texture of theduplex steel. Trials were also performed in an industrial tool used for high volume production of pumpcomponents, to compare forming of LDX 2101 and austenitic stainless steel with equal thickness. The forming forces, the geometry and the strains in the sheet material were compared for the same component.It was found that LDX steels can be formed to high strain levels in tools normally applied for forming ofaustenitic steels, but tool adaptations are needed to comply with the higher strength and springback of thematerial.

A dislocation based theory for the deformation hardening behavior of DP steels : Impact of martensite content and ferrite grain size

A dislocation model, accurately describing the uniaxial plastic stress-strain behavior of dual phase (DP) steels, is proposed and the impact of martensite content and ferrite grain size in four commercially produced DP steels is analyzed. It is assumed that the plastic deformation process is localized to the ferrite. This is taken into account by introducing a non-homogeneity parameter, f(e), that specifies the volume fraction of ferrite taking active part in the plastic deformation process. It is found that the larger the martensite content the smaller the initial volume fraction of active ferrite which yields a higher initial deformation hardening rate. This explains the high energy absorbing capacity of DP steels with high volume fractions of martensite. Further, the effect of ferrite grain size strengthening in DP steels is important. The flow stress grain size sensitivity for DP steels is observed to be 7 times larger than that for single phase ferrite.

Pellets de madeira e sua viabilidade econômico-financeira na substituição do óleo BPF-A1 em pequenos e médios consumidores no Estado de São Paulo

A utilização de pellets de madeira é bastante difundida nos países desenvolvidos, em particular na Europa, e apresenta demanda crescente para a produção de energia elétrica e térmica, incluindo a calefação residencial. O Brasil apresenta capacidade indiscutível para a geração de diferentes biomassas e em quantidades expressivas, dada à vantagem competitiva de suas condições edafo-climáticas, sua extensão territorial e de ter baixos custos de produção. Apontar-se-á neste trabalho as condições mercadológicas, logísticas, normativas, de incentivos fiscais e de ambiente econômico, com as quais o país poderá se consolidar como um grande produtor e consumidor desta fonte de energia limpa e renovável. Este estudo apresenta as melhores técnicas conhecidas para a venda a pequenos e médios consumidores e para a produção, eficiente e com escala, de pellets de madeira, dentro do Estado de São Paulo. É discutida a necessidade de se ter florestas plantadas com o único propósito de serem transformadas em pellets. Nos últimos anos, os preços dos resíduos de madeira subiram no mercado interno, praticamente os excluindo como fonte de matéria-prima, num cenário de longo prazo. O objetivo final desta dissertação é apresentar os principais aspectos econômico-financeiros que influenciam os cenários para que os pellets de madeira possam substituir o óleo BPF-A1 no mercado regional, e assim discutindo se sua produção se mostrará atraente e confiável para potenciais investidores. Para a avaliação da viabilidade financeira, são utilizados os métodos-chave, Payback, Valor Presente Líquido e Taxa Interna de Retorno, e uma análise de sensibilidade das principais variáveis identificadas. Os principais resultados revelam um Payback de 47 meses, um NPV de R$10.942.127 e uma IRR de 25,18% a.a. em termos reais, para o cenário-base, além de identificar o preço da matéria-prima e a escala de produção como as variáveis mais sensíveis.

Atraso no ajuste de preços das ações de baixa liquidez no mercado brasileiro: autocorrelações cruzadas e previsibilidade dos retornos das ações

Esta dissertação investigou, no mercado brasileiro, se o atraso no ajuste de preços das ações de baixa liquidez gera previsibilidade do retorno dessas ações quando comparadas às mais líquidas. O interesse estava em confrontar os resultados com os existentes na literatura internacional que apresentavam esse efeito. Para tanto, utilizamos a metodologia proposta no artigo “Trading volume and cross-autocorrelations in stock returns”, de Chordia e Swaminathan (2000), onde foi analisada a Bolsa de Valores de Nova York (NYSE). Verificamos que, na Bolsa de Valores de São Paulo (BOVESPA), uma vez controlados pelo tamanho das empresas, os retornos, sejam diários ou semanais, de portfólios com maior liquidez antecipam os retornos dos portfólios de menor liquidez, mais explicitamente nos quartis com pequenas e médias empresas. Os efeitos de não sincronia nas negociações e as autocorrelações próprias não são suficientes para explicar os padrões de antecipação-defasagem observados nos retornos das ações, já que esses são mais significativamente influenciados pelo volume negociado. As diferenças na velocidade da incorporação de novas informações aos preços ocorrem porque as ações menos líquidas parecem responder mais lentamente a informações de mercado, pelo menos nos portfólios de empresas de menor tamanho. Dessa maneira, podemos afirmar que no Brasil, assim como nos Estados Unidos, a baixa liquidez induz um atraso no ajuste de preços das ações de pequenas e médias empresas capaz de gerar previsibilidade dos retornos dessas ações, sugerindo alguma ineficiência do mercado. Os resultados são interessantes, já que indicam que, tanto no mercado nacional quanto nos de países desenvolvidos, os volumes negociados possuem um papel significativo na velocidade em que os preços se ajustam, jogando uma luz sobre como eles podem se tornar mais eficientes.

O papel das transferências intergovernamentais na equalização fiscal dos municípios brasileiros

Com a descentralização que caracterizou a federação brasileira nas últimas décadas, os municípios receberam maiores atribuições e responsabilidades, implementando políticas públicas e provendo serviços básicos à população. Contudo, uma vez que as receitas próprias municipais são capazes de custear apenas parcialmente estas atividades, torna-se necessário um volume elevado de transferências que fluem dos níveis centrais aos municípios. Além do mais, o Brasil é um país de território vasto e heterogêneo, em que municípios com distintas capacidades de autofinanciamento, bem como diferentes demandas por serviços públicos, convivem no mesmo regime federativo. Diante deste quadro, torna-se fundamental estudar a distribuição dos recursos das transferências, verificando se os municípios que mais necessitam de suporte financeiro têm sido os efetivamente beneficiados. À este processo de reduzir as disparidades horizontais provenientes de diferenças nas bases tributárias e demandas locais dá-se o nome de equalização fiscal. A equalização fiscal permite que municípes de diferentes jurisdições recebam o mesmo nível de serviços públicos para dada carga tributária assumida por eles (net fiscal benefit), ou seja, a equalização promove a equidade na provisão dos serviços públicos, além de evitar a criação de ineficiência alocativa derivada de migrações motivadas por benefícios fiscais. Para criar a equalização fiscal as transferências devem beneficiar aqueles municípios com menor capacidade de autofinanciamento e maiores necessidades fiscais atreladas à custos e demandas pelos serviços públicos. Neste sentido, este trabalho busca avaliar o efeito das transferências intergovernamentais na equalização fiscal dos municípios, considerando as principais proxies de capacidade fiscal – potencial de geração de receita própria – e necessidade fiscal – volume de recursos demandados em virtude das características da região e da população do município. A análise é realizada para cada grupo de transferências, desde aquelas com finalidade essencialmente redistributiva como o FPM até aquelas predominantemente devolutivas, como a cota-parte de ICMS. Os resultados mostram que algumas transferências como o FPM contribuem pouco para a equalização fiscal, apesar do objetivo de natureza redistributiva implícito neste repasse, assim como algumas transferências condicionais, como o FUNDEB, apesar de não almejarem especificamente corrigir as disparidades horizontais na capacidade dos municípios realizarem suas funções, podem significar um efeito positivo para a equalização fiscal no nível municipal da federação. Outro resultado importante que desponta na análise é o efeito da transferência do Bolsa-família na equalização, pois esta transferência consegue atenuar as distorções realizadas pelas demais transferências distribuídas aos municípios. O Bolsa-família, apesar de não ser uma transferência intergovernamental, foi incorporada na análise por representar um expressivo volume de recursos, por concorrer com recursos de outras transferências e ainda ter efeito potencial semelhante ao das demais transferências intergovernamentais no âmbito da equalização fiscal, uma vez que libera recursos no orçamento do governo local que, do contrário, poderiam estar comprometidos com a política local de assistência social. Outro resultado é a observação de que as transferências voluntárias afetam menos a equalização, ou seja, não contribuem para a consecução deste objetivo nem prejudicam a redução das disparidades horizontais, sendo relativamente neutras ou menos intervenientes em relação às demandas e capacidade de arrecadação dos municípios, provavelmente por não seguirem critérios, nem econômicos, como o ICMS, nem redistributivos, como o FPM, e sim critérios políticos, como apontado pela literatura de ciência política.

Briquetting of charcoal from sugar-cane bagasse fly ash (scbfa) as an alternative fuel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação da parafina e do óleo de linhaça como hidrofobizantes da vermiculita, para remoção de derivados de óleo diesel resentes em água produzida sintética

Produced water has lately aroused interest due to their high degree of salinity, suspended oil particles, chemicals added in various manufacturing processes, heavy metals and radioactivity sometimes. Along with oil and due to its high volume production, water production is one of the pollutants of most concern in the process of oil extraction. PAHs due to their ubiquity and their characteristics carcinogenic or mutagenic and teratogenic even have attracted the attention of every scientific society. Formed from the incomplete combustion of organic matter may be natural or anthropogenic. Some materials have been researched with the goal of cleaning up environmental matrices that may be contaminated by hydrocarbons. Among these materials researched various clays have been employed, of which highlights the vermiculite. The family of phyllosilicates, vermiculite for its potential and its high hydrophobic surface area has been a tool widely used in the decontamination of water in processes of oil spills. However, when it loses its capacity expanded hydrophobic having the necessity of using a hidrofobizante to make it organophilic. Among the numerous hidrofobizantes researched and used the linseed oil was the pioneer. In this study sought to evaluate the capacity of removal of PAHs using the vermiculite hydrofobized with linseed oil and wax also, for it was made use of the 24 full factorial design as the main tool for the experiments. We also evaluated the clay grain size (-20 +48 and -48 +80 #), the percentage of hidrofobizante applied (5 and 10%) and salinity of the water produced synthesized in our laboratory (35,000 and 55,000 ppm). The molecular fluorescence spectroscopy due to its sensitivity and speed was used to verify the adsorption capacity of clay, as well as gas chromatography served as an auxiliary technique to identify and quantify the PAHs in solution. In order to characterize the vermiculite was made use of X-ray fluorescence and X-ray diffraction. The infrared and thermogravimetry were essential to note hydrophobization and the amount of coating of clay. According to the fluorescence analysis showed that the test 12 was the best result in about 98% adsorption of fluorescent compounds, however the high salinity, the smallest particle size, the highest percentage of hidrofobizante and the use of linseed oil showed greater efficiency in the removal capacity of these hydrocarbons, in accordance with the trend followed by the analysis of the major factors of the factorial design. To verify the adsorption capacity of clay using a fixed volume of water produced synthetically, used as the test base 12, at their respective levels and factors. Thus, it was observed that after adding about 1 ½ liters of water solution produced synthetically, about 300 times its volume in mass, the vermiculite was able to adsorb 80% of fluorescent species present in solution

The Effects of 6% Hydroxyethyl Starch-Hypertonic Saline in Resuscitation of Dogs with Hemorrhagic Shock

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Advances in Peritoneal Dialysis in Acute Kidney Injury

Peritoneal dialysis (PD) is a simple, safe, cheap, and efficient renal replacement therapy method. It can correct metabolic disorders and fluid overload in acute kidney injury (AKI) patients both in and out of the intensive care unit. Use of PD in AKI is enhanced by placement of a Tenckhoff catheter, which can be safely accomplished at the bedside. Some PD modalities, such as high-volume PD and continuous-flow PD, can provide dialysis doses and efficiency comparable to extracorporeal blood purification methods. PD is particularly suitable for neonates, children, and patients with refractory heart failure or who are otherwise hemodynamically unstable. PD should be considered in situations where systemic anticoagulation and/or vascular access are problematic. PD is limited by a lower efficiency that may produce inadequate renal replacement in larger and/or severely hypercatabolic patients. Fluid removal can be unpredictable, there is a risk of infection, and possible issues with mechanical ventilation. In this article, we discuss the use of PD in AKI, with emphasis on recent advances. Copyright (c) 2012 S. Karger AG, Basel

Utilization of peritoneal dialysis in the acute setting

Peritoneal dialysis (PD), although classically described and utilized in the treatment of patients with end-stage renal disease, can also be utilized in the acute setting in different clinical situations. Recent studies showed that, in patients with acute renal failure, it is possible to obtain reasonable dialysis doses with adequate metabolic and etectrolytic control and tow incidence of complications by utilizing continuous PD through a cycler at high volume. In patients with congestive heart failure without end-stage renal disease, PD is capable of promoting clinical improvement with slow removal of liquids, becoming an attractive alternative for situations of rapidly or slowly worsening cardiac function. In patients submitted to chronic hemodialysis but who have vascular access difficulties, PD can also be utilized as a bridge, thereby avoiding the use of central venous catheters, which can be associated with infectious complications such as bacterial endocarditis. New studies must be realized showing other indications for PD.

Managing large scale virtual environments using portals

This article describes a technique for Large Scale Virtual Environments (LSVEs) partitioning in hexagon cells and using portal in the cell interfaces to reduce the number of messages on the network and the complexity of the virtual world. These environments usually demand a high volume of data that must be sent only to those users who needs the information [Greenhalgh, Benford 1997].