Curriculum: directions, decisions and debate.

The purpose of this paper is to provide an overview of the factors which may effect, stimulate or be the cause of curriculum changes in higher education (HE) in Scotland. This overview leads to a series of questions which could be used to encourage debate within and across institutions on strategic developments, which may enhance and inform the development of and support for the curriculum. The paper will begin by offering a definition of the term 'curriculum' before identifying the current areas of influence on how the curriculum, in its broadest sense, is shaped and delivered. This paper will provide an outline of some of the different approaches to the design and delivery of the curriculum which enhance the student experience in Scottish higher education, but which will of course have a wider relevance to HE in the UK and perhaps beyond.

Effect of polymeric properties on the operation of gel-type audio transducers.

A novel design of a moving-coil transducer coupled with a low-hardness elastomer called “the gel surround” is presented in this thesis. This device is termed a “gel-type audio transducer”. The gel-type audio transducer has been developed to overcome the problems that conventional loudspeakers have suffered - that is, the problem with size of the audio device against the quality of sound at low frequency range. Therefore the research work presented herein aims to develop the “gel-type audio transducer” as a next-generation audio transducer for miniaturized woofers. The gel-type audio transducer consists of the magnetic and coil-drive plate assembly, and these parts are coupled by the gel surround. The transducer is driven by the electromagnetic conversion mechanism (a moving-coil transducer) and its output driving force can be greatly enhanced by applying the novel mechanism of the gel surround especially at low frequency range, resulting in the enhanced acoustic efficiency. The transducer can be attached to a stiff and light panel with both the optimized impedance matching and minimised wave collisions. The performance of the gel-type audio transducer is greatly influenced by the mass of the magnetic assembly and compliance of the “gel surround”. But as the size of the magnet and its weight have to be kept minimal for a miniaturisation of the device, the focus of the research is on the effect of the of the gel surround. As a result, the effect of the gel surround, made of the RTV (room-temperature vulcanising) silicone elastomer, TPE (thermoplastic elastomer), and the silicone foam, on generation of the output driving force, the energy transfer from the transducer to a panel to which the transducer is attached, and sound radiation from the vibrating panel, was investigated. This effect was studied by COMSOL multiphysics (FE analysis) and thereby, the simulated results were verified by experiments such as the laser scanning measurement, DMA (dynamic mechanical analyzer), and the acoustic test. Successful development of prototypes of the gel-type audio transducers, with an enhanced acoustic efficiency at reduced size and weight, was achieved. Implementation of the transducers into consumer applications was also demonstrated with their commercial values.

Evolution feature oriented model driven product line engineering approach for synergistic and dynamic service evolution in Clouds: four kinds of schema.

The proposed research will focus on developing a novel approach to solve Software Service Evolution problems in Computing Clouds. The approach will support dynamic evolution of the software service in clouds via a set of discovered evolution patterns. An initial survey informed us that such an approach does not exist yet and is in urgent need. Evolution Requirement can be classified into evolution features; researchers can describe the whole requirement by using evolution feature typology, the typology will define the relation and dependency between each features. After the evolution feature typology has been constructed, evolution model will be created to make the evolution more specific. Aspect oriented approach can be used for enhance evolution feature-model modularity. Aspect template code generation technique will be used for model transformation in the end. Product Line Engineering contains all the essential components for driving the whole evolution process.

Moving to manage: A mixed methods study of later life relocation into supported housing.

This study describes relocation experiences of older people moving to supported housing in Scotland focusing on the nature of support. Using mixed methods, Phase one involved a Scottish cross-sectional survey of all people aged 65 and over moving into Coburg (Scotland) Housing Association supported accommodation during the first six months of 2008. A total of 122 respondents were included in the survey (59% response rate). People moved locally at advanced ages with moderate disability levels to achieve more manageable housing and support, suggesting ‘assistance migration’. Expectations were high, with many seeing it as a new start in life and generally positive views of moving were reported. In Phase two, five in-depth multiple-perspective longitudinal case studies were conducted to explore the experience of relocation into supported housing. In each case an older person, primary carer and the housing manager - all women – were interviewed over six months following relocation. Analysis was undertaken using a thematic framework approach (Ritchie et al., 2003). Findings suggested older women acted with agency to adapt to their new lives; recreating ‘normality’ through organising space and routines. It is argued that returning to normality formed the overarching objective of the older women as they sought to feel ‘in place’. Responsibilities for meeting assistance needs were often implicit, contested and shifting, leading to fragile, uncertain and transitory arrangements. Drawing on recent advances in developmental psychology it is argued ‘longings’ of older people, and others, to achieve an optimal life can relate and motivate towards actions such as relocation. Yet, personal ‘longings’ can be prioritised differently and may result in disputes over goal setting and ways needs are met. Further, utopian ideals must be reconciled with the reality of daily life. Policy and practitioners could adopt broader, dignity based objectives to assist older people to identify ways of aiding such reconciliation.

A novel Information sharing model using binary decision diagrams for redundancy, shadowing, generalisation and correlation.

This paper outlines a novel information sharing method using Binary Decision Diagrams (BBDs). It is inspired by the work of Al-Shaer and Hamed, who applied BDDs into the modelling of network firewalls. This is applied into an information sharing policy system which optimizes the search of redundancy, shadowing, generalisation and correlation within information sharing rules.

Evaluation of binary decision diagrams for redundancy, shadowing, generalisation and correlation in an Information sharing model.

This paper defines a structured methodology which is based on the foundational work of Al-Shaer et al. in [1] and that of Hamed and Al-Shaer in [2]. It defines a methodology for the declaration of policy field elements, through to the syntax, ontology and functional verification stages. In their works of [1] and [2] the authors concentrated on developing formal definitions of possible anomalies between rules in a network firewall rule set. Their work is considered as the foundation for further works on anomaly detection, including those of Fitzgerald et al. [3], Chen et al. [4], Hu et al. [5], among others. This paper extends this work by applying the methods to information sharing policies, and outlines the evaluation related to these.

An ethnographic interpretation of the work environment within a creative culture in the advertising sector.

Purpose and rationale The purpose of the exploratory research is to provide a deeper understanding of how the work environment enhances or constrains organisational creativity (creativity and innovation) within the context of the advertising sector. The argument for the proposed research is that the contemporary literature is dominated by quantitative research instruments to measure the climate and work environment across many different sectors. The most influential theory within the extant literature is the componential theory of organisational creativity and innovation and is used as an analytical guide (Amabile, 1997; Figure 8) to conduct an ethnographic study within a creative advertising agency based in Scotland. The theory suggests that creative people (skills, expertise and task motivation) are influenced by the work environment in which they operate. This includes challenging work (+), work group supports (+), supervisory encouragement (+), freedom (+), sufficient resources (+), workload pressures (+ or -), organisational encouragement (+) and organisational impediments (-) which is argued enhances (+) or constrains (-) both creativity and innovation. An interpretive research design is conducted to confirm, challenge or extend the componential theory of organisational creativity and innovation (Amabile, 1997; Figure 8) and contribute to knowledge as well as practice. Design/methodology/approach The scholarly activity conducted within the context of the creative industries and advertising sector is in its infancy and research from the alternative paradigm using qualitative methods is limited which may provide new guidelines for this industry sector. As such, an ethnographic case study research design is a suitable methodology to provide a deeper understanding of the subject area and is consistent with a constructivist ontology and an interpretive epistemology. This ontological position is conducive to the researcher’s axiology and values in that meaning is not discovered as an objective truth but socially constructed from multiple realties from social actors. As such, ethnography is the study of people in naturally occurring settings and the creative advertising agency involved in the research is an appropriate purposive sample within an industry that is renowned for its creativity and innovation. Qualitative methods such as participant observation (field notes, meetings, rituals, social events and tracking a client brief), material artefacts (documents, websites, annual reports, emails, scrapbooks and photographic evidence) and focused interviews (informal and formal conversations, six taped and transcribed interviews and use of Survey Monkey) are used to provide a written account of the agency’s work environment. The analytical process of interpreting the ethnographic text is supported by thematic analysis (selective, axial and open coding) through the use of manual analysis and NVivo9 software Findings The findings highlight a complex interaction between the people within the agency and the enhancers and constraints of the work environment in which they operate. This involves the creative work environment (Amabile, 1997; Figure 8) as well as the physical work environment (Cain, 2012; Dul and Ceylan, 2011; Dul et al. 2011) and that of social control and power (Foucault, 1977; Gahan et al. 2007; Knights and Willmott, 2007). As such, the overarching themes to emerge from the data on how the work environment enhances or constrains organisational creativity include creative people (skills, expertise and task motivation), creative process (creative work environment and physical work environment) and creative power (working hours, value of creativity, self-fulfilment and surveillance). Therefore, the findings confirm that creative people interact and are influenced by aspects of the creative work environment outlined by Amabile (1997; Figure 8). However, the results also challenge and extend the theory to include that of the physical work environment and creative power. Originality/value/implications Methodologically, there is no other interpretive research that uses an ethnographic case study approach within the context of the advertising sector to explore and provide a deeper understanding of the subject area. As such, the contribution to knowledge in the form of a new interpretive framework (Figure 16) challenges and extends the existing body of knowledge (Amabile, 1997; Figure 8). Moreover, the contribution to practice includes a flexible set of industry guidelines (Appendix 13) that may be transferrable to other organisational settings.

The lack of associations between alleles at the hypoxia-Inducible factor 1A C1772T loci and responses to acute hypoxia.

Objective The aim of this study was to investigate the associations between alleles of the hypoxia-inducible factor 1A (HIF1A) C1772T polymorphism and several physiological responses to hypoxia, including the hypoxic ventilatory response (HVR), and serum erythropoietin (EPO), arterial oxygen saturation (Sao2), and acute mountain sickness (AMS) responses during 8 hours of exposure to normobaric hypoxia. Methods A total of 76 males participated in the study; 52 participants completed an 8-hour exposure to 12.7% oxygen, during which time Sao2, EPO concentrations, and AMS scores were measured, while 62 individuals took part in an HVR trial (in total 38 individuals completed both protocols). DNA was obtained from leukocytes, and a 346-bp fragment of the HIF1A gene containing the C1772T polymorphism was amplified using polymerase chain reaction. Fragments were sequenced to reveal individual genotypes, and the associations between HIF1A genotype and EPO, Sao2, AMS responses to hypoxia and HVR were examined. Results The magnitude of the hypoxic responses was highly variable between individuals. The increase in participants' EPO responses ranged from 89% to 388% of baseline values following hypoxia, while Sao2 values during the exposure ranged from 71% to 89%. The HVR ranged from −0.04 to +2.18 L · min−1 · Sao2%−1 among participants. No significant differences in EPO, Sao2, AMS, or HVR results were observed between the HIF1A CC genotype and the combined CT/TT genotype group. Conclusion In this study, the HIF1A C1772T polymorphism does not appear to influence EPO, Sao2, or AMS responses during acute hypoxic exposure, or the magnitude of the HVR.

GABAA receptor chloride channels are involved in the neuroprotective role of GABA following oxygen and glucose deprivation in the rat cerebral cortex but not in the hippocampus.

Assays on "ex vivo" sections of rat hippocampus and rat cerebral cortex, subjected to oxygen and glucose deprivation (OGD) and a three-hour reperfusion-like (RL) recovery, were performed in the presence of either GABA or the GABA(A) receptor binding site antagonist, bicuculline. Lactate dehydrogenase (LDH) and propidium iodide were used to quantify cell mortality. We also measured, using real-time quantitative polymerase chain reaction (qPCR), the early transcriptional response of a number of genes of the glutamatergic and GABAergic systems. Specifically, glial pre- and post-synaptic glutamatergic transporters (namely GLAST1a, EAAC-1, GLT-1 and VGLUT1), three GABAA receptor subunits (α1, β2 and γ2), and the GABAergic presynaptic marker, glutamic acid decarboxylase (GAD65), were studied. Mortality assays revealed that GABAA receptor chloride channels play an important role in the neuroprotective effect of GABA in the cerebral cortex, but have a much smaller effect in the hippocampus. We also found that GABA reverses the OGD-dependent decrease in GABA(A) receptor transcript levels, as well as mRNA levels of the membrane and vesicular glutamate transporter genes. Based on the markers used, we conclude that OGD results in differential responses in the GABAergic presynaptic and postsynaptic systems.

Dynamic soil–structure interaction of monopile supported wind turbines in cohesive soil.

Offshore wind turbines supported on monopile foundations are dynamically sensitive because the overall natural frequencies of these structures are close to the different forcing frequencies imposed upon them. The structures are designed for an intended life of 25 to 30 years, but little is known about their long term behaviour. To study their long term behaviour, a series of laboratory tests were conducted in which a scaled model wind turbine supported on a monopile in kaolin clay was subjected to between 32,000 and 172,000 cycles of horizontal loading and the changes in natural frequency and damping of the model were monitored. The experimental results are presented using a non-dimensional framework based on an interpretation of the governing mechanics. The change in natural frequency was found to be strongly dependent on the shear strain level in the soil next to the pile. Practical guidance for choosing the diameter of monopile is suggested based on element test results using the concept of volumetric threshold shear strain.

Volumetric consequences of particle loss by grading entropy.

Chemical and biological processes, such as dissolution in gypsiferous sands and biodegradation in waste refuse, result in mass or particle loss, which in turn lead to changes in solid and void phase volumes and grading. Data on phase volume and grading changes have been obtained from oedometric dissolution tests on sand–salt mixtures. Phase volume changes are defined by a (dissolution-induced) void volume change parameter (Λ). Grading changes are interpreted using grading entropy coordinates, which allow a grading curve to be depicted as a single data point and changes in grading as a vector quantity rather than a family of distribution curves. By combining Λ contours with pre- to post-dissolution grading entropy coordinate paths, an innovative interpretation of the volumetric consequences of particle loss is obtained. Paths associated with small soluble particles, the loss of which triggers relatively little settlement but large increase in void ratio, track parallel to the Λ contours. Paths associated with the loss of larger particles, which can destabilise the sand skeleton, tend to track across the Λ contours.

Moisture conditions in timber cladding: field trial data for Sitka spruce.

Exposure trials on timber cladding are valuable for informing facade designers. This paper describes a trial using Sitka spruce (Picea sitchensis). Sitka spruce is the only UK-grown timber available in sufficient volume to supply the growing cladding market, but its suitability is unclear. Data indicated that the moisture content range in timber cladding was wider than generally accepted. The minimum of around 10% moisture content appeared to be similar for all details tested. The maximum was influenced by construction detailing but was around 30%. From a theoretical standpoint, the range, and rate, of moisture content fluctuation observed meant that the commonly quoted average value was largely irrelevant. The mode was a more representative statistic; most of the data were skewed towards the wood's fibre saturation point. Sitka spruce is, therefore, at risk of fungal decay and is only suitable as external cladding in the UK if treated with preservative

Undrained behaviour of two silica sands and practical implications for modelling SSI in liquefiable soils.

The aim of the present study is twofold. Firstly, the paper investigates the undrained cyclic and post-cyclic behaviour of two silica sands by means of multi-stage cyclic triaxial tests. Secondly, based on the post-cyclic response observed in the element test, the authors formulate a simplified stress–strain relationship that can be conveniently used for the construction of p–y curves for liquefiable soils. The multi-stage loading condition consists of an initial cyclic loading applied to cause liquefaction, followed by undrained monotonic loading that aimed to investigate the post-cyclic response of the liquefied sample. It was found that due to the tendency of the liquefied soil to dilate upon undrained shearing, the post-liquefaction strain–stress response was characterised by a distinct strain–hardening behaviour. The latter is idealized by means of a bi-linear stress–strain model, which can be conveniently formulated in terms of three parameters, i.e.: (i) take-off shear strain, γto, i.e. shear strain required to mobilize 1 kPa of shear strength; (b) initial secant shear modulus, G1, defined as 1/γto; (c) post-liquefied shear modulus at large strain, G2 (γ⪢γto). Based on the experimental results, it is concluded that these parameters are strongly influenced by the initial relative density of the sample, whereby γto decreases with increasing relative density. Differently both shear moduli (G1 and G2) increases with increasing relative density. Lastly, the construction of new p–y curves for liquefiable soils based on the idealized bi-linear model is described.

It's not interaction, it's make believe.

A principal, but largely unexplored, use of our cognition when using interacting technology involves pretending. To pretend is to believe that which is not the case, for example, when we use the desktop on our personal computer we are pretending, that is, we are pretending that the screen is a desktop upon which windows reside. But, of course, the screen really isn't a desktop. Similarly when we engage in scenario- or persona-based design we are pretending about the settings, narrative, contexts and agents involved. Although there are exceptions, the overwhelming majority of the contents of these different kinds of stories are not the case. We also often pretend when we engage in the evaluation of these technologies (e.g. in the Wizard of Oz technique we "ignore the man behind the curtain"). We are pretending when we ascribe human-like qualities to digital technology. In each we temporarily believe something to be the case which is not. If we add the experience of tele- and social-presence to this, and the diverse experiences which can arise from using digital technology which too are predicted on pretending, then we are prompted to propose that human computer interaction and cognitive ergonomics are largely built on pretending and make believe. If this premise is accepted (and if not, please pretend for a moment), there are a number of interesting consequences.