Desenvolvimento de sorvete probiótico a base de leite de cabra: estudo da formulação, características físico químicas, sensoriais e viabilidade das bactérias probióticas

This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food

Anticandidal Efficacy of Cinnamon Oil Against Planktonic and Biofilm Cultures of Candida parapsilosis and Candida orthopsilosis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Agaricus blazei (Himematsutake) does not alter the development of rat diethylnitrosamine-initiated hepatic preneoplastic foci

The modifying potential of crude extracts of the mushroom Agaricus blazei Murrill (Himematsutake) on the development and growth of glutathione S-transferase placental form (GST-P)-positive liver foci (liver preneoplastic lesion) was investigated in adult male Wistar rats. Six groups of animals were used. Groups 2 to 5 were given a single i.p. injection of 200 mg/kg b.w. of diethylnitrosamine (DEN) and groups 1 and 6 were treated with saline at the beginning of the experiment. After 2 weeks, animals of groups 3 to 6 were orally treated with three dose levels of aqueous extracts of the mushroom A. blazei (1.2, 5.6, 11.5, and 11.5 mg/ml of dry weight of solids) for 6 weeks. All animals were subjected to two-thirds partial hepatectomy at week 3 and sacrificed at week 8. Two hours before sacrifice, ten animals of each group were administered a single i.p injection of 100 mg/kg of bromodeoxyuridine (BrdU). Apoptotic bodies and BrdU-positive hepatocyte nuclei were quantified in liver sections stained for hematoxylin and eosin (H&E) (eosinophilic foci) and simultaneously stained for GST-P expression (GST-P-positive foci), respectively. The 6-week treatment with A. blazei did not alter the development (number and size) of GST-P-positive foci and did not affect the growth kinetics of liver normal parenchyma or foci in DEN-initiated animals. Our results indicate that the treatment with aqueous extracts of the mushroom A. blazei during the post-initiation stage of rat liver carcinogenesis does not exert any protective effect against the development of GST-P-positive foci induced by DEN. (Cancer Sci 2003; 94: 188-192).

Lack of chemopreventive effects of ginger on colon carcinogenesis induced by 1,2-dimethylhydrazine in rats

Ginger (Zingiber officinale Roscoe) has been proposed as a promising candidate for cancer prevention. Its modifying potential on the process of colon carcinogenesis induced by 1,2-dimethylhydrazine (DMH) was investigated in male Wistar rats using the aberrant crypt foci (ACF) assay. Five groups were studied: Groups 1-3 were given four s.c. injections of DMH (40 mg/kg b.w.) twice a week, during two weeks, whereas Groups 4 and 5 received similar injections of EDTA solution (DMH vehicle). After DMH-initiation, the animals were fed a ginger extract mixed in the basal diet at 0.5% (Group 2) and 1.0% (Groups 3 and 4) for 10 weeks. All rats were killed after 12 weeks and the colons were analyzed for ACF formation and crypt multiplicity. The rates of cell proliferation and apoptosis were also evaluated in epithelial colonic crypt cells. Dietary consumption of ginger at both dose levels did not induce any toxicity in the rats, but ginger meal at 1% decreased significantly serum cholesterol levels (p < 0.038). Treatment with ginger did not suppress ACF formation or the number of crypts per ACF in the DMH-treated group. Dietary ginger did not significantly change the proliferative or apoptosis indexes of the colonic crypt cells induced by DMH. Thus, the present results did not confirm a chemopreventive activity of ginger on colon carcinogenesis as analyzed by the ACF bioassay and by the growth kinetics of the colonic mucosa. (c) 2005 Elsevier Ltd. All rights reserved.

Photo-electrochemical investigation of anodic oxide films on cast Ti-Mo alloys I. Anodic behaviour and effect of alloy composition

The anodic behaviour of cast Ti-Mo alloys, having different Mo contents (6-20 wt.%), was investigated in acidic and neutral aerated aqueous solutions. All sample showed a valve-metal behaviour, owing to formation and thickening of barrier-type anodic oxides displaying interference colours Growth kinetics. of passive films is influenced by both anodizing electrolyte and composition of the starting alloy. This last parameter was found to change also the solid-state properties of the films, explored by photoelectrochemical and impedance spectroscopy experiments. Thicker films (U(f) = 8 V/MSE) grown on alloys richer in Mo showed more resistive character and a photocurrent sign inversion under negative bias, that revealed an insulating character, whereas corresponding films grown on alloys with lower Mo content, as well as thinner films, behaved as n-type semiconductors. Results are discussed in terms of formation of a mixed Ti-Mo oxide phase. (C) 2008 Elsevier Ltd. All rights reserved

Sintering of ultrafine undoped SnO2 powder

The sintering process of nanometric undoped SnO2 powder was studied. No macroscopic shrinkage was observed during the sintening process. Grain growth kinetics investigation showed that surface diffusion is the dominant mechanism in the temperature range 500-1300 degreesC. For temperatures higher than 1300 degreesC, high weight loss was measured, suggesting evaporation-condensation as the dominant mass-transport mechanism. Thermogravimetric analysis (TG) and mass spectroscopy studies showed that the surface contamination of the SnO2 particles by chemical species like H2O, OH- and CO2, has a strong influence on the role of mass transport controlled by surface diffusion. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Microstructural development of ZnO varistor during reactive liquid phase sintering

The microstructural evolution, grain growth and densification for the varistor systems ZnO-Bi2O3 (ZB), ZnO-Bi2O3-Sb2O3 (ZBS), ZnO-Bi2O3-Sb2O3-MnO-Cr 2O3-CoO (ZBSCCM) were studied using constant heating rate sintering, scanning electron microscopy (SEM) and in situ phase formation measurement by high temperature X-ray diffraction (HT-XRD). The results showed that the densifying process is controlled by the formation and decomposition of the Zn2Bi3Sb3O14 pyrochlore (PY) phase for the ZBS and ZBSCCM systems. The addition of transition metals (ZBSCCM system) alters the formation and decomposition reaction temperatures of the pyrochlore phase and the morphology of the Zn7Sb2O12 spinel phase. Thus, the spinel grains act as inclusions and decrease the ZnO grain growth rate. Spinel grain growth kinetics in the ZBSCCM system showed an n value of 2.6, and SEM and HT-XRD results indicate two grain growth mechanisms based on coalescence and Ostwald ripening. © 1996 Chapman & Hall.

Efeito do alumínio no crescimento de brotações de Eucalyptus grandis x E. urophylla cultivadas in vitro

The aim of this work was to evaluate the effects of aluminum on the growth of Eucalyptus shoots cultivated in vitro through nutrient and total soluble protein content. The trial had a totally randomized design with four treatments and four replicates. The treatments were: 0.0; 0.25; 0.5 and 1.0 mM of AlCl 3.6H 2O. Shoots without roots of a Eucalyptus grandis x E urophylla clone were used for the in vitro culture. Evaluations were made on the 4th, 8th, 12th, 16th, 20th, 24th and 28th day of culture. The Al addition to the culture media reduced mainly Ca, P and K availability and absorptions by the shoots. The cellular metabolism was affected, conducted to morphological alterations in shoots (browning, mass calluses formation and shoots not friable), dry matter increased and a decreased in total protein soluble.

Propriedades de contração na madeira juvenil e adulta de Pinus taeda L.

This paper had the objective of studying variability of radial, tangential, longitudinal and volumetric shrinkage between the juvenile and mature wood, from a 35 year-old Pinus taeda L., from Horto Florestal of Manduri at São Paulo State, Brazil. First of all the experimental program determinations were related to the juvenile wood, region of the transition and region of the mature wood, using anatomical analysis (length of the axial tracheids), according to ABNT and IAWA codes. Results had shown that the area of juvenile wood of this species occurs approximately until the 20th growth ring, being more representative until the 12th ring. The transition area of this wood occurs between the 12th and 20th growth ring. In the second part of the work the shrinkage of the juvenile and mature wood were evaluated. Values of the radial, tangential and volumetric shrinkage were smaller and more variable on the juvenile wood. The longitudinal shrinkage did not present significant differences between the two wood types; medium values were slightly inferior and very variable on juvenile wood related to mature wood.

Efeito da densidade de plantas de Panicum maximum Jacq. sobre o crescimento inicial de Eucalyptus grandis W.Hill ex Maiden

In order to verify the effect of Panicum maximum plant density on the initial growth of Eucalyptus grandis plants, one assay was conducted under semi-controlled conditions of soil fertility and humidity. Dark red Latossol, collected from the arable layer, was used as substrate in 50 liters amianthus cement boxes. One seedling of Eucalyptus was planted in each box. Fifteen days later, seedlings of P. maximum were transplanted on the same box. The treatments consisted of 0, 4, 8, 12, 16 and 20 plants of P. maximum per m 2. The experimental design was the complete randomized design, with six treatments and eight replicates for P. maximum. One hundred and ten and 190 days after transplanting, Eucalyptus plants grown among P. maximum showed an average reduction of 30.80 and 46.55% stem diameter, 25.10 and 22.50 plant high, 40.18 and 31.29% stem dry weight, 61.32 and 54.06% branch dry weight, 53.72 and 51.82% root dry weight, 44.62 and 38.50% leaf dry weight, 22.51 and 23.16 branch number, 20.72 and 19.97% leaf number, and 33.88 and 17.05% leaf area, respectively.

Faixas de controle de plantas daninhas e seus reflexos no crescimento de plantas de eucalipto

Two field trial were conducted in Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S.T. Blake crops at Três Lagoas, Mato Grosso do Sul State and Brotas, São Paulo State, Brazil, to evaluate the effects of weed control in strip of different width on the Eucalyptus plant growth. The experiments consisted of two groups treatments: group 1 - with constant width control strips being kept during the first 12 months, i.e., at 0, 25, 50, 100, 125 and 150cm on each side of the Eucalyptus row and, group 2: with increasing width control strips being adopted along the experimental period, i.e., at 25 to 150, 25-50-150, 50 to 150, 50-125-150, 100-125-150, 100 tot 150 and 125 to 150 cm on each side of the Eucalyptus row during the first 12 months. At 49 moths after planting it was verified that the Eucalyptus plants that had grown both in the constant and increasing width control strips, equal to or higher than 100 and 50 cm, respectively, showed higher steam diameter, plant height, volume and annual increment average of wood. These results led to the conclusion that the minimum control strip width should be 100 cm on each side of the Eucalyptus row in order to keep the crop free of weed interference.

Biological control of sheep parasite nematodes by nematode-trapping fungi: In vitro activity and after passage through the gastrointestinal tract

The main method used for the control of gastrointestinal nematodes in sheep production is the application of chemotherapeutic agents, which often lead to the selection of parasites resistant to given active principles. Biological control can be considered a promising alternative, contributing to an increase in the efficacy of verminous control. We determined the in vitro activity and in situ survival of the predatory fungi Arthrobotrys musiformis and Arthrobotrys conoides during passage through the gastrointestinal tract of sheep after oral administration of conidia in microencapsulated form and as a liquid in natura. Initial in vitro tests showed that both fungi were efficient in the predation of trichostrongylid L3 larvae present in the faeces of sheep naturally infected with gastrointestinal nematodes. The fungi presented high nematophagous activity, which was 99.3% for A. conoides and 73.7% for A. musiformis. A. conoides did not survive passage through the gastrointestinal tract under the conditions of the present experiment. On the other hand, A. musiformis was reisolated after administration in either microencapsulated or liquid form, suggesting that this species is a promising alternative for the control of nematodes in sheep since it survives without any protection (in natura). © Springer 2005.

Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades

High chromium content is responsible for the formation of a protective passive surface layer on austenitic stainless steels (ASS). Due to their larger amounts of chromium, superaustenitic stainless steels (SASS) can be chosen for applications with higher corrosion resistance requirements. However, both of them present low hardness and wear resistance that has limited their use for mechanical parts fabrication. Plasma nitriding is a very effective surface treatment for producing harder and wear resistant surface layers on these steel grades, without harming their corrosion resistance if low processing temperatures are employed. In this work UNS S31600 and UNS S31254 SASS samples were plasma nitrided in temperatures from 400 °C to 500 °C for 5 h with 80% H 2-20% N2 atmosphere at 600Pa. Nitrided layers were analyzed by optical (OM) and transmission electron microscopy (TEM), x-ray diffraction (XRD), and Vickers microhardness testing. Observations made by optical microscopy showed that N-rich layers were uniform but their thicknesses increased with higher nitriding temperatures. XRD analyses showed that lower temperature layers are mainly composed by expanded austenite, a metastable nitrogen supersaturated phase with excellent corrosion and tribological properties. Samples nitrided at 400 °C produced a 5 μm thick expanded austenite layer. The nitrided layer reached 25 lm in specimens treated at 500 °C. There are indications that other phases are formed during higher temperature nitriding but XRD analysis was not able to determine that phases are iron and/or chromium nitrides, which are responsible for increasing hardness from 850 up to 1100 HV. In fact, observations made by TEM have indicated that formation of fine nitrides, virtually not identified by XRD technique, can begin at lower temperatures and their growth is affected by both thermodynamical and kinetics reasons. Copyright © 2012 by ASTM International.

Methods for obtaining reliable and reproducible results in studies of Candida biofilms formed in vitro

Biofilm formation is one of the most important attributes for virulence in Candida species and contributes to increased resistance to antifungal drugs and host immune mechanisms. These features have led to the development of several methodologies to reproduce a sessile community in vitro that can be used to study the development of a biofilm, its interaction with other microorganisms and the environment, and its susceptibility to available antifungal agents and also to search for new therapy strategies. The purpose of this review is to describe the most commonly used methods to study Candida biofilms in vitro, to discuss the benefits and limitations of the different methods to induce biofilm formation, and to analyse the architecture, viability and growth kinetics of Candida biofilms. © 2013 Blackwell Verlag GmbH.

Cinética do crescimento miceliano de Lentinula edodes (Berk.) Pegler em bagaço de cana-de-açúcar e serragem de eucalipto

Pós-graduação em Agronomia (Energia na Agricultura) - FCA