Dynamics and scaling of self-excited passive vortex generators for underwater propulsion

A series of experiments was conducted on the use of a device to passively generate vortex rings, henceforth a passive vortex generator (PVG). The device is intended as a means of propulsion for underwater vehicles, as the use of vortex rings has been shown to decrease the fuel consumption of a vehicle by up to 40% Ruiz (2010).

The PVG was constructed out of a collapsible tube encased in a rigid, airtight box. By adjusting the pressure within the airtight box while fluid was flowing through the tube, it was possible to create a pulsed jet with vortex rings via self-excited oscillations of the collapsible tube.

A study of PVG integration into an existing autonomous underwater vehicle (AUV) system was conducted. A small AUV was used to retrofit a PVG with limited alterations to the original vehicle. The PVG-integrated AUV was used for self-propelled testing to measure the hydrodynamic (Froude) efficiency of the system. The results show that the PVG-integrated AUV had a 22% increase in the Froude efficiency using a pulsed jet over a steady jet. The maximum increase in the Froude efficiency was realized when the formation time of the pulsed jet, a nondimensional time to characterize vortex ring formation, was coincident with vortex ring pinch-off. This is consistent with previous studies that indicate that the maximization of efficiency for a pulsed jet vehicle is realized when the formation of vortex rings maximizes the vortex ring energy and size.

The other study was a parameter study of the physical dimensions of a PVG. This study was conducted to determine the effect of the tube diameter and length on the oscillation characteristics such as the frequency. By changing the tube diameter and length by factors of 3, the frequency of self-excited oscillations was found to scale as f~D_0^{-1/2} L_0^0, where D_0 is the tube diameter and L_0 the tube length. The mechanism of operation is suggested to rely on traveling waves between the tube throat and the end of the tube. A model based on this mechanism yields oscillation frequencies that are within the range observed by the experiment.

Simulação numérica do escoamento de água em áreas alagáveis da floresta amazônica com a utilização da estrutura de dados Autonomous Leaves Graph

A Amazônia exibe uma variedade de cenários que se complementam. Parte desse ecossistema sofre anualmente severas alterações em seu ciclo hidrológico, fazendo com que vastos trechos de floresta sejam inundados. Esse fenômeno, entretanto, é extremamente importante para a manutenção de ciclos naturais. Neste contexto, compreender a dinâmica das áreas alagáveis amazônicas é importante para antecipar o efeito de ações não sustentáveis. Sob esta motivação, este trabalho estuda um modelo de escoamento em áreas alagáveis amazônicas, baseado nas equações de Navier-Stokes, além de ferramentas que possam ser aplicadas ao modelo, favorecendo uma nova abordagem do problema. Para a discretização das equações é utilizado o Método dos Volumes Finitos, sendo o Método do Gradiente Conjugado a técnica escolhida para resolver os sistemas lineares associados. Como técnica de resolução numérica das equações, empregou-se o Método Marker and Cell, procedimento explícito para solução das equações de Navier-Stokes. Por fim, as técnicas são aplicadas a simulações preliminares utilizando a estrutura de dados Autonomous Leaves Graph, que tem recursos adaptativos para manipulação da malha que representa o domínio do problema