Flavonoid supplement improves leg health and reduces fluid retention in pre-menopausal women in a double-blind, placebo-controlled study

Flavonoid extracts derived from plant foods have been shown to benefit certain types of fluid retention. However, no studies have investigated these compounds for use in premenstrual fluid retention, a complaint common among women with otherwise normal menstrual cycles. Therefore, we conducted a double-blind, placebo-controlled, pilot study into the effect of a daily flavonoid extract (Colladeen(R), 320 mg oligomeric procyanidins) on premenstrual fluid retention. Fluid retention was assessed at baseline and throughout 4 menstrual cycles of the intervention using validated questionnaires. Leg girth was also measured at baseline and at the end of the study. Thirty subjects completed the study (n = 18 active treatment; n = 12 placebo). Although no significant changes in leg girth measurements were noted, there was a significant improvement in subjective "leg health" scores after flavonoid treatment compared to placebo (p = 0.013). Furthermore, this was accompanied by an improvement in reported premenstrual fluid retention nearing significance (p = 0.066). We conclude that flavonoids supplements may provide a new therapeutic direction to counter premenstrual fluid retention and improve leg health. A larger study is now warranted.

Increased levels of microparticles originating from endothelial cells, platelets and erythrocytes in subjects with metabolic syndrome: relationship with oxidative stress

Background and aims The Metabolic Syndrome (MetS) is associated with increased cardiovascular risk. Circulating microparticles (MP) are involved in the pathogenesis of atherothrombotic disorders and are raised in individual with CVD. We measured their level and cellular origin in subjects with MetS and analyzed their associations with 1/anthropometric and biological parameters of MetS, 2/inflammation and oxidative stress markers. Methods and results Eighty-eight subjects with the MetS according to the NCEP-ATPIII definition were enrolled in a bicentric study and compared to 27 healthy controls. AnnexinV-positive MP (TMP), MP derived from platelets (PMP), erythrocytes (ErMP), endothelial cells (EMP), leukocytes (LMP) and granulocytes (PNMP) were determined by flow cytometry. MetS subjects had significantly higher counts/μl of TMP (730.6 ± 49.7 vs 352.8 ± 35.6), PMP (416.0 ± 43.8 vs 250.5 ± 23.5), ErMP (243.8 ± 22.1 vs 73.6 ± 19.6) and EMP (7.8 ± 0.8 vs 4.0 ± 1.0) compared with controls. LMP and PNMP were not statistically different between groups. Multivariate analysis demonstrated that each criterion for the MetS influenced the number of TMP. Waist girth was a significant determinant of PMP and EMP level and blood pressure was correlated with EMP level. Glycemia positively correlated with PMP level whereas dyslipidemia influenced EMP and ErMP levels. Interestingly, the oxidative stress markers, plasma glutathione peroxydase and urinary 8-iso-prostaglandin F2 α, independently influenced TMP and PMP levels whereas inflammatory markers did not, irrespective of MP type. Conclusion Increased levels of TMP, PMP, ErMP and EMP are associated with individual metabolic abnormalities of MetS and oxidative stress. Whether MP assessment may represent a marker for risk stratification or a target for pharmacological intervention deserves further investigation.

THE ENDOPARASITE PILOSTYLES ULEI (APODANTHACEAE - CUCURBITALES) INFLUENCES WOOD STRUCTURE IN THREE HOST SPECIES OF MIMOSA

Pilostyles species (Apodanthaceae) are endoparasites in stems of the plant family Fabaceae. The body comprises masses of parenchyma in the host bark and cortex, with sinkers, comprising groups of twisted tracheal elements surrounded by parenchyma that enter the secondary xylem of the host plant. Here we report for the first time the effects of Pilostyles parasitism on host secondary xylem. We obtained healthy and parasitized stems from Mimosa foliolosa, M. maguirei and M. setosa and compared vessel element length, fiber length, vessel diameter and vessel frequency, measured through digital imaging. Also, tree height and girth were compared between healthy and parasitized M. setosa. When parasitized, plant size, vessel diameter, vessel element length and fiber length are all less than in healthy plants. Also, vessel frequency is greater and vessels are narrower in parasitized stems. These responses to parasitism are similar to those observed in stressed plants. Thus, hosts respond to the parasite by changing its wood micromorphology in favour of increased hydraulic safety.

Parâmetros métricos da traqueia e suas correlações com o perímetro torácico, peso e comprimento corporal de cães sem raça definida (Canis familiaris, Linnaeus, 1758)

The present study aimed to analyze metric data from the trachea of dogs and to correlate them with the thoracic girth, body length and weight. We used 48 dogs of unknown breed, 19 males and 29 females. The animals were weighed and then body length, thoracic girth, length and diameter of the trachea, and the number of tracheal rings were measured. The weight of dogs ranged from 4.2 to 21.5 kg, body length from 40.6 to 81.0 cm and thoracic girth from 36.0 to 63.5 cm. The trachea exhibited a total number of tracheal rings between 32 and 43, length between 13.0 and 23.4 cm, diameter of the cervical portion between 11.0 and 23.5 mm and in the thoracic portion between 8.2 and 20.9 mm. We also evaluated the tracheal termination skeletopy, which maintained relations with the 2nd (2.0%), 3 (6.3%), 4 (20.8%) or 5 (12.5%) intercostal spaces, and with the 3rd (6.3%), 4th (35.4%) or 5th (16.7%) ribs. Strong positive correlations of tracheal length with body weight (rS = 0.756, p <0.001), body length (r = 0.808, p <0.001) and thoracic girth (r = 0.735, p <0.001) were found. Therefore, the anatomical study of the trachea provides morphological subsidies for the realization of clinical and surgical procedures in this organ, being an important tool in veterinary practice.

Estimativas de tendências e parâmetros genéticos do peso padronizado aos 378 dias de idade, medidas corporais e perímetro escrotal de machos Nelore de Sertãozinho, SP

Os objetivos deste estudo foram estimar as tendências e os parâmetros genéticos e fenotípicos do peso padronizado aos 378 dias de idade (P378), medidas corporais e perímetro escrotal de machos Nelore, pertencentes às populações selecionadas e controle da Estação Experimental de Zootecnia de Sertãozinho. As herdabilidades, estimadas considerando-se modelo de touro e modelo animal, foram, respectivamente, 0,53±0,12 e 0,36 para P378; 0,38±0,11 e 0,58 para altura na garupa; 0,31±0,10 e 0,10 para perímetro torácico; 0,40± 0,11 e 0,13 para comprimento do corpo; 0,39±0,11 e 0,30 para comprimento do dorso; 0,33±0,10 e 0,12 para comprimento da garupa; 0,08± 0,07 e 0,14 para distância de ísquios; 0,23±0,09 e 0,08 para distância de íleos e 0,57±0,13 e 0,44 para perímetro escrotal. A correlação genética mais alta entre P378 e medidas corporais foi encontrada para perímetro torácico (0,86 ± 0,08); as demais variaram de 0,46 a 0,72. Os resultados deste estudo mostraram que, em função dos valores médios a altos das herdabilidades estimadas para P378 e da maioria das características de medidas do corpo dos animais, houve considerável variação genética aditiva nesses atributos. Além disso, devido às altas correlações genéticas de P378 com a maioria das características, pode-se concluir ser bastante provável que grande parte dos genes que controlam o peso pós-desmame também seja responsável pelo desenvolvimento das diferentes regiões do corpo de machos Nelore. A magnitude desses parâmetros justifica a tendência genética positiva nas características de seleção direta e nas secundárias.

Ganho compensatório em cordeiras na fase de recria: desempenho e medidas biométricas

Objetivou-se estudar o ganho compensatório de cordeiras submetidas a restrição alimentar e, posteriormente, a realimentação à vontade. Foram adotados dois períodos de 60 dias, de modo que, no primeiro, 18 cordeiras 7/8 Ile de France 1/8 Ideal foram distribuídas em três tratamentos, em delineamento inteiramente casualisado: sem restrição = alimentação à vontade por todo o experimento; restrição 30% = restrição alimentar de 30% em relação ao consumo do grupo sem restrição; e restrição 60% = restrição alimentar de 60% em relação ao consumo do grupo sem restrição. No segundo período, todas as cordeiras receberam alimentação à vontade. Ao final do primeiro período, as cordeiras alimentadas à vontade e aquelas sob restrição alimentar de 30%, tiveram ganho de peso corporal de 18 e 0,8%, respectivamente, enquanto aquelas sob restrição alimentar de 60% perderam 15% de peso corporal. No segundo período, todas as cordeiras ganharam peso, observando-se maior ganho naquelas sob restrição 30% (196,24 g/dia) em relação às sem restrição (116,20 g/dia). O ganho de peso desses dois grupos, no entanto, não diferiu do grupo restrição 60% (178,03 g/dia). A conversão alimentar das cordeiras alimentadas à vontade foi 10,09 e a daquelas com restrição alimentar de 30% foi de 5,97. As medidas biométricas foram semelhantes no início do experimento, mas, ao final da restrição alimentar, houve diminuição de 16% na largura do ombro, de 21% na largura da garupa, de 6,9% no perímetro torácico e de 39% na condição corporal das cordeiras do grupo restrição 60% em relação às medidas iniciais. A restrição alimentar de 60% resultou em menor consumo de MS e em peso corporal final mais baixo, ocasionando prejuízos na maioria das medidas corporais. A restrição alimentar de 30%, no entanto, pode ser indicada como alternativa de manejo alimentar para melhorar a conversão alimentar e reduzir o consumo total de alimento.

Avaliação de diferentes dirtas sobre o desempenho de bezerros da raça holandesa durante o período de aleitamento

Foram utilizados 24 bezerros da raça Holandesa distribuídos em delineamento inteiramente casualizado com oito repetições e três tratamentos: leite integral (LI) e dois tipos de sucedâneos, DestetorÒ (DES) e LactalÒ (LAC), durante o período de aleitamento (60 dias), sendo avaliados: ganho de peso, consumo de matéria seca e mensurações corporais (altura na cernelha, circunferência toráxica e ventral). Os ganhos médios diários de peso, a altura na cernelha e a circunferência torácica e ventral dos bezerros não diferiram (P>0,05) entre os tratamentos. Foram obtidas as médias de ganho de peso de 0,32, 0,41 e 0,26 kg/bezerro/dia nos tratamentos LI, DES e LAC, respectivamente. O consumo de matéria seca total na fase de aleitamento, durante 60 dias, diferiu entre os tratamentos, sendo que os bezerros que receberam o sucedâneo DES consumiram mais matéria seca total, comparados àqueles que receberam o sucedâneo LAC (P<0,05). As médias de consumo diário de matéria seca foram: 0,79; 0,94 e 0,68kg/bezerro respectivamente para os tratamentos LI, DES e LAC.

Gender-based differences in stride and limb dimensions between healthy red-wing tinamou (Rhynchotus rufescens) Temminck, 1815

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dried yeast (Saccharomyces cerevisae) as a protein source for horses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Clones promissores de seringueira para a região do Vale do Ribeira, São Paulo

Este trabalho objetivou apresentar resultados da primeira seleção de clones de seringueira (Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell.Arg.) da série IAC 300, e amazônicos das séries IAN e Fx, em experimento de pequena escala, visando produção, crescimento e resistência ao mal-das-folhas. A produção e o vigor de 20 clones foram avaliados por dois e nove anos, respectivamente, em PariqüeraAçú, no Vale do Ribeira, SP. Os clones IAC 301, IAC 304, IAC 306 e IAC 319 produziram satisfatoriamente nos dois primeiros anos de sangria. Os clones amazônicos IAN 6323, Fx 3864 e IAN 2903, com produções de 1.078 kg, 945 kg e 900 kg/ha/ano, respectivamente, foram superiores à testemunha IAN 873 (878 kg/ha/ano). Os clones selecionados apresentaram crescimento vigoroso, com extremos de perímetro do caule, na abertura do painel, de 37,40 cm (IAN 4493) a 53,75 cm (IAN 6323), e percentual de plantas aptas à sangria de 7,0% (IAN 4493) a 100% (IAN 6323 e IAC 302), exceto os clones Fx 3899 e IAN 3044. O IAC 315, com 7,37 mm, mostrou maior espessura de casca virgem que o IAN 873 (6,44 mm). Os clones IAC 320, IAC 306 e IAC 315 foram os mais resistentes ao Microcyclus ulei.

Digital radiography using digital detector arrays fulfills critical applications for offshore pipelines

Digital radiography in the inspection of welded pipes to be installed under deep water offshore gas and oil pipelines, like a presalt in Brazil, in the paper has been investigated. The aim is to use digital radiography for nondestructive testing of welds as it is already in use in the medical, aerospace, security, automotive, and petrochemical sectors. Among the current options, the DDA (Digital Detector Array) is considered as one of the best solutions to replace industrial films, as well as to increase the sensitivity to reduce the inspection cycle time. This paper shows the results of this new technique, comparing it to radiography with industrial films systems. In this paper, 20 test specimens of longitudinal welded pipe joints, specially prepared with artificial defects like cracks, lack of fusion, lack of penetration, and porosities and slag inclusions with varying dimensions and in 06 different base metal wall thicknesses, were tested and a comparison of the techniques was made. These experiments verified the purposed rules for parameter definitions and selections to control the required digital radiographic image quality as described in the draft international standard ISO/DIS 10893-7. This draft is first standard establishing the parameters for digital radiography on weld seam of welded steel pipes for pressure purposes to be used on gas and oil pipelines.

Pulsed Nd:YAG laser seam welding of AISI 316L stainless steel thin foils

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Micro Welding of Ni-based Alloy Monel 400 Thin Foil by Pulsed Nd:YAG laser

In this study a pulsed Nd:YAG laser was used to join Monel 400 thin foil with 100 mu m thickness. Pulse energy was varied from 1.0 to 2.25J at small increments of 0.25J. The macro and microstructures were analyzed by optical microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the bottom foil dilution rate, it is possible to weld Monel 400 thin foil. The process appeared to be very sensitive to the gap between couples.

Pulsed Nd:YAG laser welding of Ni-alloy Hastelloy C-276 foils

In this study a pulsed Nd:YAG laser was used to join Hastelloy C-276 thin foil with 100 microns thickness. Pulse energy was varied from 1.0 to 2.25 J at small increments of 0.25 J with a 4 ms pulse duration. The macro and microstructures of the welds were analyzed by optical and electronic microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the dilution rate, it is possible to weld Hastelloy C-276 thin foil by pulsed Nd: YAG laser. (C) 2012 Published by Elsevier B. V. Selection and/or review under responsibility of Bayerisches Laserzentrum GmbH

Prediction of Hevea progeny performance in the presence of genotype-environment interaction

Twenty two open-pollinated Hevea progenies from different parental clones of the Asian origin were tested at five sites in the Northwestern São Paulo State Brazil to investigate the progeny girth growth, rubber yield, bark thickness and plant height. Except for the rubber yield, the analysis of variance indicated highly significant (p<0.01) genotype x environment interaction and heterogeneity of regressions among the progenies. However, the regression stability analysis identified only a few interacting progenies which had regression coefficients significantly different from the expected value of one. The linear regressions of the progeny mean performance at each test on an environmental index (mean of all the progenies in each test) showed the general stability and adaptability of most selected Hevea progenies over the test environments. The few progenies which were responsive and high yielding on different test sites could be used to maximize the rubber cultivars productivity and to obtain the best use of the genetically improved stock under different environmental conditions.