Crystallographic structure and substrate-binding interactions of the molybdate-binding protein of the phytopathogen Xanthomonas axonopodis pv. citri

In Xanthomonas axonopodis pv. citri (Xac or X citri), the modA gene codes for a periplasmic protein (ModA) that is capable of binding molybdate and tungstate as part of the ABC-type transporter required for the uptake of micronutrients. In this study, we report the crystallographic structure of the Xac ModA protein with bound molybdate. The Xac ModA structure is similar to orthologs with known three-dimensional structures and consists of two nearly symmetrical domains separated by a hinge region where the oxyanion-binding site lies. Phylogenetic analysis of different ModA orthologs based on sequence alignments revealed three groups of molybdate-binding proteins: bacterial phytopathogens, enterobacteria and soil bacteria. Even though the ModA orthologs are segregated into different groups, the ligand-binding hydrogen bonds are mostly conserved, except for Archaeglobus fulgidus ModA. A detailed discussion of hydrophobic interactions in the active site is presented and two new residues, Ala(38) and Ser(151), are shown to be part of the ligand-binding pocket. (c) 2007 Elsevier B.V All rights reserved.

Loops, Chains, Sheets, and Networks from Variable Coordination of Cu(hfac)(2) with a Flexibly Hinged Aminoxyl Radical Ligand

One pair of reactants, Cu(hfac)(2) = M and the hinge-flexible radical ligand 5-(3-N-tert-butyl-N-aminoxylphenyl)pyrimidine (3PPN = L), yields a diverse set of five coordination complexes: a cyclic loop M(2)L(1) dimer; a 1:1 cocrystal between an M(2)L(2) loop and an ML(2) fragment; a ID chain of M(2)L(2) loops linked by M; two 2D M(3)L(2) networks of (M-L)(n) chains crosslinked by M with different repeat length pitches; a 3D M(3)L(2) network of M(2)L(2) loops cross-linking (M-L)(n)-type chains with connectivity different from those in the 2D networks. Most of the higher dimensional complexes exhibit reversible, temperature-dependent spin-state conversion of high-temperature paramagnetic states to lower magnetic moment states having antiferromagnetic exchange within Cu-ON bonds upon cooling, with accompanying bond contraction. The 3D complex also exhibited antiferromagnetic exchange between Cu(II) ions linked in chains through pyrimidine rings.

Magnetic fabric and zircon U-Pb geochronology of the Itaoca pluton: Implications for the Brasiliano deformation of the southern Ribeira Belt (SE Brazil)

The Itaoca pluton consists of porphyritic monzogranite that intruded the upper crust into low-grade metasedimentary rocks of the Apiai Dornain (Ribeira Belt). Anisotropy of magnetic susceptibility and zircon U-Pb (Shrimp) geochronology were combined to determine pluton emplacement mechanisms and its chronology relative to the collision structures of the Paranapiacaba (Brasiliano II) orogenic system. Magnetic susceptibility ranges between 4 and 38 x 10(-3) SI, and thermomagnetic measurements indicate multidomain magnetite is the main carrier of anisotropy. The pluton shows an ""onion-skin"" structure roughly elongated to the northeast with its hinge zone including kilometer-wide roof-pendants. Magnetic lineations are variable in orientation in consistency with the dominant oblate symmetry of the magnetic fabric. A distinct NE-trending point-maxima, however, indicates the mean lineation is parallel to the stretching direction of the transpressive deformation that affected the regional host rocks. Prismatic zircon from the monzogranite, both in the core and in the finely-zoned margins, yielded an age of 623 +/- 10 Ma. These results suggest the magmatic fabric recorded the earlier strain increments of the regional shear deformation. It may correspond to the transition from continental arc to collision tectonics of the southern Ribeira Belt. (C) 2008 Elsevier Ltd. All rights reserved.

Kraftutveckling för manuella trädfällningsredskap : Force development for manual tree felling tools

The objective with this study has been to build general models of the mechanics in tree felling with chain-saw and to compare felling torque for different tools. The theoretical models are completed and validated with a comparative study. The study includes a great number of felling tools of which some are used with different methods. Felling torque was measured using a naturally like measuring arrangement where a tree is cut at about 3.7 m height and then anchored with a dynamometer to a tree opposite to the felling direction. Notch and felling cut was made as ordinary with exception that the hinge was made extra thin to reduce bending resistance. The tree was consequently not felled during the trials and several combinations of felling tools and individuals could be used on the same tree.The results show big differences between tools, methods and persons. The differences were, however, not general, but could vary depending on conditions (first of all tree diameters). Tools and methods that push or pull on the stem are little affected by the size of the tree, while tools that press on the stump are very much dependent of a large stump-diameter. Hand force asserted on a simple pole is consequently a powerful tool on small trees. For trees of medium size there are several alternative methods with different sizes and brands of felling levers and wedges. Larger and more ungainly tools and methods like tree pusher, winch, etc. develop very high felling torque on all tree sizes. On large trees also the felling wedge and especially the use of several wedges together develop very high felling torque.

Análise não linear física e geométrica de pórticos espaciais

Apresenta-se uma formulação do tipo incrementaliterativa destinada a análise não linear de pórticos espaciais. Considera-se os efeitos não lineares introduzidos pelas mudanças de configuração geométrica da estrutura e também pela combinação destes efeitos com aqueles inerentes ao comportamento plástico exibido pelo material. As relações cinemáticas empregadas permitem a consideração de deslocamentos arbitrariamente grandes, acompanhadas de pequenas deformações . A modelagem do comportamento plástico do material é efetuada através do conceito de rótula plástica, estabelecido a partir de um critério de plastificação generalizado. Adota-se uma matriz de rigidez geométrica de barra baseada em momentos semitangenciais. Para elementos com extremos plastificados, é deduzida uma matriz de rigidez elasto-plástica. Emprega-se um método numérico do tipo incremental-iterativo, que utiliza como condição básica de controle da análise a constância do trabalho realizado pelos incrementos de cargas, em cada passo incremental (Método de Controle por Trabalho).A formulação permite uma descricão completa do desempenho mecânico da estrutura, inclusive em estágio de deformação pós-crítico em que ocorre regressão do carregamento com aumento de deslocamentos, ou vice-versa. A formulação foi implementada em um programa computacional elaborado em linguagem FORTRAN. Vários exemplos numéricos são apresentados para mostrar a eficiência das procedimentos propostos.

O "espetáculo do cabra macho" : um estudo sobre os vaqueiros nas vaquejada no Rio Grande do Norte

This body of work discusses the gender meanings associated with cowboys while endorsing contemporary rodeos in Rio Grande do Norte as a recreational sport and a form of ludic expression. As a result, this research has focused on rodeo practices, aiming to understand the different aspects emphasizing masculinity: these associations being constructed through relationships, contexts and the competitiveness between participants. These gender meanings hinge on the desire for a wining performance and on the behaviour exhibited among cowboys outside the competitive ring in specific social settings such as parties and recreational time. The latter were the focus of the ethnographic research; direct observation and semistructured interviews with cowboys in rodeo stadiums were also used. Through qualitative analysis of the collected data, it was revealed that historically and socially different trajectories do not immediately cause a gender crisis in cowboys, but the assignment of new significance by the social acts in each historical context. However, the presence of cowboys leads to other models of masculinity configured by expressions and the insertion of new personas, not coming directly from field activities, but imbued by the symbolic elements of the cowboy persona, constructed throughout history

A formação de professores surdos de Libras: a centralidade de ambientes bilíngues em sua formação

The study object of this thesis intertwines the history of deaf education in the last 30 years in three schools for the deaf in the cities of Campina Grande, Gado Bravo and Aroeiras, Paraiba, the life stories of six deaf teachers of brasilian sign language (Libras) that have formed and works in these educational institutions for the deaf and our own journey, as a teacher and researcher. The study was conducted on the theoretical-methodological principles of (auto)biographical research in education and socio-historical studies on the social formation of the human. The corpus used for analysis was consisted of six narrative interviews conducted in sign language and transcribed into portuguese, documents and personal files and institutional. The analysis allowed us to define three hinge moments of this story: the creation of the first school for the deaf, within the framework of oralism (1980 - 1991), the passage into the Total Communication (1991 - 1995) and, finally, the introduction of Bilingualism (1995 to today). The analyzes show that the trajectories of teacher formation of the research participants reflect the history of the three schools which have costituted bilingual social spaces of paramount importance to the subjects and the deaf community as a group of linguistic and cultural minority. The evolution of this trajectory has allowed to demarcate between the two generations of research participants. The generation of heirs of oralism, which had delayed access to the Libras and lived an education referenced in oralism, whose reminiscences of childhood and adolescence are strongly marked by suffering for the lack of communication, which hinders their social and professional career until today. And the generation of the sons of bilingualism, the youngest in age, who had childhood access to Libras and education within the framework of bilingualism, whose reminiscences are not marked by suffering and have a positive vision of the future. With respect to your teacher formation, three figures stand out as a teacher. The teacher's improvised, closer to the first generation of teachers who were called to teach without proper training. The figure of the teacher craftsman, which corresponds to the image that most of them have of yourself now, understanding that their knowledge are based on the exchange between peers. And finally the figure of the real teacher, which stands on the horizon of expectations as future graduates in Letters |Libras. The narratives allowed to realize that the evolution between these figures is based on the contributions of the other: hearing teachers of EDAC and the Federal University of Campina Grande and deaf teachers of the two generations who learn from each other. The analyzes and reflections allowed to defend the thesis of the centrality of bilingual environments for the establishment of the deaf person as a citizen with full rights, based on the voice of the deaf, muted by the history of education, conducted by listeners

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de magnésio como aditivo

The tricalcium phosphate ceramics has been widely investigated in the last years due its bioresorbable behavior. The limiting factor of the application of these materials as temporary implants is its low strength resistance. The tricalcium phosphate presents an allotropic transformation β→α around 1250 ºC that degrades its resistance. Some studies have been developed in order to densify this material at this temperature range. The objective of this work is to study the influence of the addition of magnesium oxide (MgO) in the sintering of β-TCP. The processing route was uniaxial hot pressing and its objective was to obtain dense samples. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements, analyzed of the microstructure. The addition of magnesium oxide doesn t cause an improvement of the mechanical strength in relation to material without additive.

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de manganês como aditivo

The calcium phosphate ceramics have been very investigated as material for bone implants. The tricalcium phosphate (β-TCP) had a great potential for application in temporary implants like a resorbable bioceramic. This material presents a limitation in its sintering temperature due to occurrence of the allotropic transformation β → α at temperatures around 1200°C, not allowing the attainment of dense ceramic bodies. This transformation also causes cracks, what diminishes the mechanical strength, limiting its use to applications of low mechanical requests. This work studies the influence of the addition of manganese oxide in the sintering of β-TCP. Two processing routes were investigated. The first was the powder metallurgy conventional process. The test bodies (samples) were pressed and sintering at temperatures of 1200 and 1250°C. The second route was uniaxial hot pressing and its objective was to obtain samples with high relative density. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements. The microstructure was analyzed by scanning electron microscopy. The addition of manganese oxide caused an improvement of the mechanical strength in relation to the material without additive and promoting the stabilization of β-TCP to greater temperatures

Caracterização de cerâmicas porosas de alumina reforçada com zircônia produzidas pelo método da réplica

Porous ceramics have many applications: thermal insulation, catalytic support, materials to fire protection, filters, and others. There are many techniques to production of ceramic filters. One technique to obtain ceramic filters is the replication method. This method consists in the impregnation of polymeric foam with ceramic slurry followed by a heating treatment that will burn out the organic elements and sintering of the material, resulting of a replication of the original foam. To perform their functions ceramic filters must satisfy mechanical requirements and permeability parameters (darcian k1 and no-darcian k2). The permeability and the strength of the ceramic material are dependent of the pore size and pore distribution. To the use at high temperatures the evaluation of mechanical properties in these temperatures is necessary. In this work the mechanical behavior of two commercial porous ceramics (10 and 40 poros per inch) was studied these materials were submitted to compression and four-point flexure test (room temperature, at 1000 °C, after thermal shock). Density and porosity measurements, permeability tests and microstructural analysis by scanning electronic microscopy (SEM) were realized. The Results showed that the decrease of mechanical strength of these materials, when submitted to thermal shock, occur for propagation of new cracks from cracks pre-existing and the permeability depends of the pore size

Maxillo-mandibular counter-clockwise rotation and mandibular advancement with TMJ Concepts (R) total joint prostheses Part II - Airway changes and stability

The purpose of this study was to evaluate the anatomical changes and stability of the oropharyngeal airway and head Posture following TMJ reconstruction and mandibular advancement with TMJ Concepts custom-made total joint prostheses and maxillary osteotomies with counter-clockwise rotation of the maxillo-mandibular complex. All patients were operated at Baylor University Medical Center, Dallas TX, USA, by one surgeon (Wolford). The lateral cephalograms of 47 patients were analyzed to determine surgical and post-surgical changes of the oropharyngeal airway, hyoid bone and head posture. Surgery increased the narrowest retroglossal airway space 4.9 mm. Head Posture showed flexure immediately after surgery (-5.6 +/- 6.7 degrees) and extension long-term post surgery (1.8 +/- 6.7 degrees); cervical curvature showed no significant change. Surgery increased the distances between the third cervical vertebrae and the menton 11.7 +/- 9.1 mm and the third cervical vertebrae and hyoid 3.2 +/- 3.9 mm, and remained stable. The distance from the hyoid to the mandibular plane decreased during surgery (-3.8 +/- 5.8 mm) and after surgery (-2.5 +/- 5.2 mm), Maxillo-mandibular advancement with counter-clockwise rotation and TMJ reconstruction with total joint prostheses produced immediate increase in oropharyngeal airway dimension, which was influenced by long-term changes in head posture but remained stable over the follow-up period.

TAXONOMIC POSITION of GUIRATINGIA MENDESI (MEGADESMIDAE) and THE EVOLUTION of PERMIAN ENDEMIC BIVALVE FAUNA of THE PARANA BASIN, BRAZIL

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Regge calculus in teleparallel gravity

In the context of the teleparallel equivalent of general relativity, the Weitzenbock manifold is considered as the limit of a suitable sequence of discrete lattices composed of an increasing number of smaller and smaller simplices, where the interior of each simplex (Delaunay lattice) is assumed to be flat. The link lengths l between any pair of vertices serve as independent variables, so that torsion turns out to be localized in the two-dimensional hypersurfaces (dislocation triangle, or hinge) of the lattice. Assuming that a vector undergoes a dislocation in relation to its initial position as it is parallel transported along the perimeter of the dual lattice (Voronoi polygon), we obtain the discrete analogue of the teleparallel action, as well as the corresponding simplicial vacuum field equations.

Crystal structure of myotoxin-II: A myotoxic phospholipase A2 - Homologue from Bothrops moojeni venom.

The crystal structure of Myotoxin-II (MjTX-II), a Lys49 PLA(2)-homologue from Bothrops moojeni venom has been determined and refined at 2.0 Angstrom to a crystallographic residual of 19.7% (R-free = 28.1%). MjTX-II is a dimer in the crystal, with the monomers in the asymmetric unit related by a two-fold symmetry axis running through the dimer interface. The dimers of MjTX-II and the Lys49 PLA(2) from B. asper venom are similar, however the relative orientations of the monomers suggests a flexible dimer interface, which serves as a hinge between the two molecules.

Postsurgical stability of oropharyngeal airway changes following counter-clockwise maxillo-mandibular advancement surgery

Purpose: This study evaluated oropharyngeal airway changes and stability following surgical counter-clockwise rotation and advancement of the maxillo-mandibular complex.Methods and Patients: Fifty-six adults (48 females, 8 males), between 15 and 51 years of age, were treated with Le Fort I osteotomies and bilateral mandibular ramus sagittal split osteotomies to advance the maxillo-mandibular complex with a counter-clockwise rotation. The average postsurgical follow-up was 34 months. Each patient's lateral cephalograms were traced, digitized twice, and averaged to estimate Surgical changes (T2-T1) and Postsurgical changes (T3-T2).Results: During surgery, the occlusal plane angle decreased significantly (8.6 +/- 5.8 degrees) and the maxillo-mandibular complex advanced and rotated counter-clock-wise. The maxilla moved forward (2.4 +/- 2.7 mm) at ANS and the mandible was advanced 13.1 +/- 5.1 min at menton, 10 +/- 4.4 mm at point B, and 6.9 +/- 3.7 mm at lower incisor edge. Postsurgical hard tissue changes were not statistically significant. While the upper oropharyngeal airway decreased significantly (4.2 +/- 3.4 min) immediately after surgery, the narrowest retropalatal, lowest retropalatal airway, and the narrowest retroglossal airway measurements increased 2.9 +/- 2.7, 3.7 +/- 3.2, and 4.4 +/- 4.4 mm, respectively. Over the average 34 months Postsurgical period, upper retropalatal airway increased 3.9 +/- 3.7 mm, while narrowest retropalatal, lowest retropalatal airway, and narrowest retroglossal airway remained stable. Head posture showed flexure immediately after Surgery (4.8 +/- 5.9 degrees) and extension postsurgically (1.6 +/- 5.6 degrees).Conclusion: Maxillo-mandibular advancement with counter-clockwise rotation produces immediate increases in middle and lower oropharyngeal airway dimensions, which were constrained by changes in head posture but remain stable over the postsurgical period. The upper oropharyngeal airway space increased only on the longest follow-up. (C) 2006 American Association of Oral and Maxillofacial Surgeons.