Experimental studies in recall and recognition,

"Columbia University Contributions to Philosophy and Psychology, vol. XXVII, no. 1."

Critical and experimental studies in psychology from the University of Illinois.

Dynamical principles in recent psychology / Madison Bentley -- Some neglected aspects of a history of psychology / Coleman R. Griffith -- A preliminary study of the emothions/ C.A. Ruckmick -- A comment upon the psychology of the audience / Coleman R. Griffith -- Leading and legibility / Madison Bentley -- The printing of backbone titles on thin books and magazines / P.N. Gould, L.C. Raines and C.A. Ruckmick -- Experiments in sound localization / C.A. Ruckmick -- The intensive summation of thermal sensations / Annette Baron and Madison Bentley.

Experimental studies in mental deficiency. Three cases of imbeciltiy (Mongolian) and six cases of feeble-mindedness,

"Appendix and bibliography": p. 52-56.

Experimental studies on the accuracy of wax patterns used in investment casting

Investment casting is often used to produce fully functional prototype components from sacrificial patterns. These patterns (prototypes) may be made using specialized rapid prototyping techniques such as stereolithography or three-dimensional printing. When multiple functional prototypes are required, interim tools for making wax patterns are employed. The objective of this research work was to determine the precision and accuracy of wax patterns produced using several prototype tools. Linear contraction was used to determine the accuracy as a function of the wax injection parameters used in low-pressure injection moulding. Wax patterns were produced using polyurethane and silicone rubber tools. It has been shown that the accuracy of patterns from both tools is similar. However, silicone tools produce patterns with much higher contraction than those produced by polyurethane tools. Unconstrained patterns dimensions contracted as much as 3.44 +/- 0.40 per cent and 1.70 +/- 0.60 per cent for silicone and polyurethane tools respectively. The constrained dimensions contracted by 2.20 +/- 0.20 per cent in the case of silicone tools and 1.40 +/- 0.20 per cent in the case of polyurethane tools.

Experimental studies of lobe growth in the lichen Parmelia conspersa (Ehrh. Ex Ach.) Ach.

The radial growth of individual lobes of the foliose lichen, Parmelia conspersa (Ehrh. Ex Ach.) Ach. was studied to determine whether (1) adjacent lobes exchange carbohydrate and (2) marginal competition between lobes influences radial growth. In a survey of thalli of different size, the number of marginal lobes was linearly related to thallus circumference. However, the relationship between mean lobe width and thallus circumference was fitted by a second order polynomial. Hence, mean lobe width may reach a maximum in thalli approx. 3 cm in diameter. The interactions between marginal lobes were studied by either painting single lobes with acrylic paint or by removing lobes from the thallus. Painting the whole lobe virtually stopped its radial growth while partially painted lobes grew less than control lobes. The radial growth of a lobe was unaffected by either completely painting or removing its neighbour. Removal of both neighbouring lobes did not influence the radial growth of a lobe but severing the lobe from the thallus reduced its radial growth. In addition, lobe width increased significantly when both neighbouring lobes were removed. These results suggest that adjacent lobes have a considerable degree of independence and that there is little exchange of carbohydrate between them. In addition, marginal competition between adjacent lobes may restrict the lateral extension of the lobe and this may maintain a more constant mean lobe width in larger thalli. It is possible that the intensity of marginal competition between adjacent lobes may vary with thallus size and this could be a factor determining the growth curve of a foliose lichen throughout its life.

Experimental studies on the distribution of the sexes of Mercurialis perennis L.

1) In a beechwood, male shoots of Mercurialis perennis were more frequent than female shoots in canopy openings, while females were more frequent at treebases than in canopy openings. 2) Flowering shoots were more frequent than non-flowering in openings. 3) The pH, moisture and organic content of the soil were similar at treebases and openings. The light climate was similar in both habitats in April but greater in the openings in August. 4) Removal of canopies of Pteridium aquilinum and Rubus fruticosus, above populations of M. perennis, resulted in a greater increase in the numbers of male shoots than of female shoots. 5) These results suggest that male and female plants differ in numbers, or growth, in different woodland microhabitats and that these differences are correlated with the above-ground environment (e.g. light).

Experimental studies of hypothallus growth in the lichen Rhizocarpon geographicum

Removal of the areolae of the crustose lichen Rhizocarpon geographicum (L.)DC. resulted in either low or no measurable radial growth of the marginal hypothallus. Radial growth of the hypothallus was also significantly reduced compared with intact thalli when (1) areolae were removed to within 1 and 2 mm of the hypothallus and (2) a 5 mm wide ‘moat’ was created between the areolae and the hypothallus. Adding ribitol (0.01 M) to isolated hypothalli at 3-month intervals over 15 months results in total radial growth c. 60% that of intact thalli. Adding an arabitol/mannitol mixture (0.05 M arabitol, 0.03 M mannitol) increased radial growth compared with deionized water and ribitol treatments. Adding ribitol (0.7 M), arabitol (0.2 M) and mannitol (0.08 M) to the areolae of intact thalli had no significant effects on radial growth of the hypothallus. On a south-facing rock surface, isolated hypothalli grew at a similar rate to intact thalli for 2 months. Growth then declined and the hypothalli disappeared from the rock surface within 6 months. The effects of addition of carbohydrate suggest that the marginal hypothallus has the capacity to utilize exogeneous materials. However, in intact thalli in the field, the radial growth of the hypothallus is likely to be a result of transfer of materials from the areolae through hyphal connections.

Towards a practical implementation of coherent WDM:analytical, numerical, and experimental studies

Future optical networks will require the implementation of very high capacity (and therefore spectral efficient) technologies. Multi-carrier systems, such as Orthogonal Frequency Division Multiplexing (OFDM) and Coherent WDM (CoWDM), are promising candidates. In this paper, we present analytical, numerical, and experimental investigations of the impact of the relative phases between optical subcarriers of CoWDM systems, as well as the effect that the number of independently modulated subcarriers can have on the performance. We numerically demonstrate a five-subcarrier and three-subcarrier 10-GBd CoWDM system with direct detected amplitude shift keying (ASK) and differentially/coherently detected (D) phase shift keying (PSK). The simulation results are compared with experimental measurements of a 32-Gbit/s DPSK CoWDM system in two configurations. The first configuration was a practical 3-modulator array where all three subcarriers were independently modulated, the second configuration being a traditional 2-modulator odd/even configuration, where only odd and even subcarriers were independently modulated. Simulation and experimental results both indicate that the independent modulation implementation has a greater dependency on the relative phases between subcarriers, with a stronger penalty for the center subcarrier than the odd/even modulation scheme.

Patterns of sedentary behavior : insights from observational and experimental studies on body composition and energy expenditure

It is recognized that sedentary behavior (SB) has deleterious effects on numerous health outcomes and it appears that physiological mechanisms underlying these harms are distinct from the ones explaining moderate-to-vigorous physical activity (MVPA) benefits. Sedentary behavior represents a large portion of human’s life and is increasing with technological development. A new current of opinion supports the idea that the manner SB is accumulated plays an important role. This dissertation presents six research studies conducted under the scope of SB. In the methodological area, the first study highlighted the magnitude of potential errors in estimating SB and its patterns from common alternative methods (accelerometer and heart rate monitor) compared to ActivPAL. This study presented the accelerometer as a valid method at a group level. Two studies (2 and 5) were performed in older adults (the most sedentary group in the population) to test the associations for SB patterns with abdominal obesity using accelerometry. The findings showed positive graded associations for prolonged sedentary bouts with abdominal obesity and showed that those who interrupted SB more frequently were less likely to present abdominal obesity. Therefore, public health recommendations regarding breaking up SB more often are expected to be relevant. The associations between sedentary patterns and abdominal obesity were independent of MVPA in older adults. However, the low MVPA in this group makes it unclear whether this independent relationship still exists if highly active persons are analysed. Study 3 inovates by examining the association of SB with body fatness in highly trained athletes and found SB to predict total fat mass and trunk fat mass, independently of age and weekly training time. Study 4 also brings novelty to this research field by quantifying the metabolic and energetic cost of the transition from sitting to standing and then sitting back down (a break), informing about the modest energetic costs (0.32 kcal·min−1). Finally, from a successful multicomponent pilot intervention to reduce and break up SB (study 6), an important behavioral resistance to make more sit/stand transitions despite successfully reducing sitting time (~ 1.85 hours·day-1) was found, which may be relevant to inform future behavioral modification programs. The present work provides observational and experimental evidence on the relation for SB patterns with body composition outcomes and energy regulation that may be relevant for public health interventions.

A SCR Model based on Reactor and Engine Experimental Studies for a Cu-zeolite Catalyst

A NOx reduction efficiency higher than 95% with NH3 slip less than 30 ppm is desirable for heavy-duty diesel (HDD) engines using selective catalytic reduction (SCR) systems to meet the US EPA 2010 NOx standard and the 2014-2018 fuel consumption regulation. The SCR performance needs to be improved through experimental and modeling studies. In this research, a high fidelity global kinetic 1-dimensional 2-site SCR model with mass transfer, heat transfer and global reaction mechanisms was developed for a Cu-zeolite catalyst. The model simulates the SCR performance for the engine exhaust conditions with NH3 maldistribution and aging effects, and the details are presented. SCR experimental data were collected for the model development, calibration and validation from a reactor at Oak Ridge National Laboratory (ORNL) and an engine experimental setup at Michigan Technological University (MTU) with a Cummins 2010 ISB engine. The model was calibrated separately to the reactor and engine data. The experimental setup, test procedures including a surrogate HD-FTP cycle developed for transient studies and the model calibration process are described. Differences in the model parameters were determined between the calibrations developed from the reactor and the engine data. It was determined that the SCR inlet NH3 maldistribution is one of the reasons causing the differences. The model calibrated to the engine data served as a basis for developing a reduced order SCR estimator model. The effect of the SCR inlet NO2/NOx ratio on the SCR performance was studied through simulations using the surrogate HD-FTP cycle. The cumulative outlet NOx and the overall NOx conversion efficiency of the cycle are highest with a NO2/NOx ratio of 0.5. The outlet NH3 is lowest for the NO2/NOx ratio greater than 0.6. A combined engine experimental and simulation study was performed to quantify the NH3 maldistribution at the SCR inlet and its effects on the SCR performance and kinetics. The uniformity index (UI) of the SCR inlet NH3 and NH3/NOx ratio (ANR) was determined to be below 0.8 for the production system. The UI was improved to 0.9 after installation of a swirl mixer into the SCR inlet cone. A multi-channel model was developed to simulate the maldistribution effects. The results showed that reducing the UI of the inlet ANR from 1.0 to 0.7 caused a 5-10% decrease in NOx reduction efficiency and 10-20 ppm increase in the NH3 slip. The simulations of the steady-state engine data with the multi-channel model showed that the NH3 maldistribution is a factor causing the differences in the calibrations developed from the engine and the reactor data. The Reactor experiments were performed at ORNL using a Spaci-IR technique to study the thermal aging effects. The test results showed that the thermal aging (at 800°C for 16 hours) caused a 30% reduction in the NH3 stored on the catalyst under NH3 saturation conditions and different axial concentration profiles under SCR reaction conditions. The kinetics analysis showed that the thermal aging caused a reduction in total NH3 storage capacity (94.6 compared to 138 gmol/m3), different NH3 adsorption/desorption properties and a decrease in activation energy and the pre-exponential factor for NH3 oxidation, standard and fast SCR reactions. Both reduction in the storage capability and the change in kinetics of the major reactions contributed to the change in the axial storage and concentration profiles observed from the experiments.

Experimental and numerical studies of hollow flange channel beams subject to web crippling under ETF and ITF load cases

This paper presents the details of experimental and numerical studies on the web crippling behaviour of hollow flange channel beams, known as LiteSteel beams (LSB). The LSB has a unique shape of a channel beam with two rectangular hollow flanges, made using a unique manufacturing process. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies consisting of 28 tests were first conducted in this research to assess the web crippling behaviour and strengths of LSBs under two flange load cases (ETF and ITF). Experimental web crippling capacity results were then compared with the predictions from AS/NZS 4600 and AISI S100 design rules, which showed that AS/NZS 4600 and AISI S100 design equations are very unconservative for LSBs under ETF and ITF load cases. Hence improved equations were proposed to determine the web crippling capacities of LSBs. Finite element models of the tested LSBs were then developed, and used to determine the elastic buckling loads of LSBs under ETF and ITF load cases. New equations were proposed to determine the corresponding elastic buckling coefficients of LSBs. Finally suitable design rules were also developed under the Direct Strength Method format using the test results and buckling analysis results from finite element analyses.

Crumpet structures: experimental and modelling studies

Crumpets are made by heating fermented batter on a hot plate at around 230°C. The characteristic structure dominated by vertical pores develops rapidly: structure has developed throughout around 75% of the product height within 30s, which is far faster than might be expected from transient heat conduction through the batter. Cooking is complete within around 3 min. Image analysis based on results from X-ray tomography shows that the voidage fraction is approximately constant and that there is continual coalescence between the larger pores throughout the product although there is also a steady level of small bubbles trapped within the solidified batter. We report here experimental studies which shed light on some of the mechanisms responsible for this structure, together with some models of key phenomena.Three aspects are discussed here: the role of gas (carbon dioxide and nitrogen) nuclei in initiating structure development; convective heat transfer inside the developing pores; and the kinetics of setting the batter into an elastic solid structure. It is shown conclusively that the small bubbles of carbon dioxide resulting from the fermentation stage play a crucial role as nuclei for pore development: without these nuclei, the result is not a porous structure, but rather a solid, elastic, inedible, gelatinized product. These nuclei are also responsible for the tiny bubbles which are set in the final product. The nuclei form the source of the dominant pore structure which is largely driven by the, initially explosive, release of water vapour from the batter together with the desorption of dissolved carbon dioxide. It is argued that the rapid evaporation, transport and condensation of steam within the growing pores provides an important mechanism, as in a heat pipe, for rapid heat transfer, and models for this process are developed and tested. The setting of the continuous batter phase is essential for final product quality: studies using differential scanning calorimetry and on the kinetics of change in the visco-elastic properties of the batter suggest that this process is driven by the kinetics of gelatinization. Unlike many thermally driven food processes the rates of heating are such that gelatinization kinetics cannot be neglected. The implications of these results for modelling and for the development of novel structures are discussed.

Re-examination of the anion derivatives of isoflavones by radical fragmentation in negative electrospray ionization tandem mass spectrometry: experimental and computational studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures

In recent times, light gauge cold-formed steel sections have been used extensively as primary load bearing structural members in many applications in the building industry. Fire safety design of structures using such sections has therefore become more important. Deterioration of mechanical properties of yield stress and elasticity modulus is considered the most important factor affecting the performance of steel structures in fires. Hence there is a need to fully understand the mechanical properties of light gauge cold-formed steels at elevated temperatures. A research project based on experimental studies was therefore undertaken to investigate the deterioration of mechanical properties of light gauge cold-formed steels. Tensile coupon tests were undertaken to determine the mechanical properties of these steels made of both low and high strength steels and thicknesses of 0.60, 0.80 and 0.95 mm at temperatures ranging from 20 to 800ºC. Test results showed that the currently available reduction factors are unsafe to use in the fire safety design of cold-formed steel structures. Therefore new predictive equations were developed for the mechanical properties of yield strength and elasticity modulus at elevated temperatures. This paper presents the details of the experimental study, and the results including the developed equations. It also includes details of a stress-strain model for light gauge cold-formed steels at elevated temperatures.

Experimental tests on structural members fabricated from high strength steel materials

Typical high strength steels (HSS) have exceptional high strengths with improved weldability making the material attractive in modern steel constructions. However, due to lack of understanding, most of the current steel design standards are limited to conventional low strength steels (LSS, i.e. fy ≤ 450 MPa). This paper presents the details of full-scale experimental tests on short beams fabricated from BISPLATE80 HSS materials (nominal fy = 690 MPa). The various slenderness ratios of the plate elements in the test specimens were chosen in the range near the current yield limit (AS4100-1998, etc.). The experimental studies presented in this paper have produced a better understanding of the structural behaviour of HSS members subjected to local instabilities. Comparisons have also presented in the paper regarding to the design predictions from the current steel standards (AS4100-1998). This study has enabled to provide a series of proposals for proper assessment of plate slenderness limits for structural members made of representative HSS materials. This research work also enables the inclusion of further versions in the steel design specifications for typical HSS materials to be used in buildings and bridges. This paper also presents a distribution model of residual stresses in the longitudinal direction for typical HSS I-sections.