A oferta de bens perecíveis : determinação das curvas e estimativas para o mercado varejista Carioca

Neste artigo desenvolvemos um modelo de otimização que permite determinar curvas de oferta para produtos perecíveis. As informações disponíveis ao produtor(vendedor) sobre a demanda são sumarizadas por uma distribuição de probabilidade, a qual lhe permitirá determinar a oferta que maximiza seu gannho esperado. A função objetivo levará em conta, conjuntamente, as perdas decorrentes de um estoque excedente e parcelas do custo de oportunidade de um estoque insuficiente. Esta formalização inclui a função lucro (contábil) como um caso particular. Aplicações do modelo teórico são feitas para demandas absolutamente contínuas com distribuição admitindo inversa explícita, tais como a exponencial truncada, Pareto, Weibull e uniforme. Estimativas empíricas são obtidas para a oferta de tomates, chuchus e pimentões no mercado varejista Carioca (Julho/94 à Nov/00). Os resultados obtidos confirmam as hipóteses racionais do modelo teórico. As elasticidades-preço da oferta (no varejo) e da demanda (no atacado) são estimadas, assim que o valor da oferta ”contratual ”, nos casos em que parte dos custos dos saldos de estoque são recuperados por vendas em liquidação. A análise gráfica das curvas de oferta e de densidade da demanda sugerem a presença de significativo poder de mercado na comercialização do pimentão. Duas extensões imediatas do modelo formal são desenvolvidas. A primeira delas incorpora a existência de poder de mercado no mercado varejista. A segunda introduz uma estrutura de jogo simultâneo no mercado oligopolista onde cada produtor escolhe a curva que maximiza seu lucro esperado condicional, dado que as ofertas dos concorrentes igualam suas demandas. No equilíbrio de Nash, curvas de oferta ótimas são obtidas. Comparações são feitas com as curvas ótimas obtidas em regime de autarquia.

Efeitos da atuação do BNDES sobre o investimento

O presente estudo busca quantificar os efeitos dos desembolsos do BNDES sobre os investimentos dos setores da indústria e serviços a partir de bases de dados do IBGE e do BNDES. Os resultados, obtidos de estimações em painéis de efeitos fixos, aleatórios e Arellano-Bond, indicam que o efeito marginal dos empréstimos do BNDES aos investimentos dos setores pode ser positivo, ainda que bastante reduzido. Além disso, os setores apresentam resultados bastante heterogêneos entre si em sua reação ao recebimento de crédito do BNDES. Ao passo que alguns setores apresentam elasticidades consistentemente positivas, outros apresentaram elasticidade negativa do investimento às concessões do BNDES. Tais resultados indicam que pode haver efeito crowding out como resultado de políticas de direcionamento a empresas de maior porte, em detrimento das firmas menores. Ainda, na estimação de funções de risco, em um dos resultados verificou-se que os setores que recebem recursos do BNDES possuem maior probabilidade de acessar o mercado de capitais.

Resiliência - um estudo exploratório da percepção de gestores sobre o constructo, nas dimensões humana e organizacional

Afinal, o que os gestores entendem por resiliência? É o questionamento que pautou este estudo e para respondê-lo desenvolvemos uma pesquisa empírica com 17 gestores de empresas de diversos portes, aqui no Rio de Janeiro, por meio de entrevista semi-estruturada, realizada durante os meses de janeiro a junho de 2015. As respostas colhidas foram submetidas à Análise do Discurso posibilitando identificar na prática discursiva, figuras de linguagem, ethos do entrevistado, seleção lexical predominante, intertextualidade e temas de fundo, e relacioná-los aos elementos do corpus discursivo acadêmico, o que permitiu a constituição das categorias analíticas sobre: resiliência humana e resiliência organizacional. A análise concluiu que, para os gestores, embora o conceito de resiliência humana ainda seja influenciado pelos conceitos de elasticidade e invulnerabilidade, que informaram a construção do conceito de resiliência nos estudos iniciais no campo da Psicologia, a resiliência é um processo dinâmico cujo resultado é a adaptação bem sucedida e a transformação do indivíduo. A resiliência organizacional é personificada na resiliência dos indivíduos, especificamente, na dos gestores cujos comportamentos, individuais e coletivos, contribuem ou impedem a resiliência organizacional, com destaque para a revelação a respeito de como a resiliência influencia o processo de tomada de decisão, tanto por sua presença como por sua ausência. Este estudo é relevante na medida que suas revelações consubstanciam implicações para a academia e para as empresas. Para a academia a influência da resiliência no processo decisório sinaliza um denominador comum diante do qual as pesquisas acadêmicas podem partir, viabilizando a elaboração de proposições epistemológicas, metodológicas e praxiólogicas que ampliem, de forma realista, as possibilidades de acesso, por indivíduos e organizações, de um repertório de respostas produtivas às adversidades. Para as empresas as revelações deste estudo implicam em maior foco das iniciativas de desenvolvimento, tanto organizacional quanto de pessoas, no alinhamento de estrutura, processos e gestão de ativos intangíveis relacionados ao exercício da liderança, que resultem no delineamento de uma cultura organizacional favorável e compatível com um contexto viabilizador da resiliência organizacional.

Fatores que deslocam as curvas de demanda e de oferta e consequências do deslocamento

Unidade 2

A utilização de varões de GFRP nas estruturas de betão armado

A crescente preocupação com a deterioração e consequente reparação e reabilitação das estruturas de betão armado tradicionais, sobretudo devido ao fenómeno da corrosão associada aos varões de aço, que afecta significativamente a durabilidade deste tipo de estruturas, tem impulsionado a introdução dos varões de GFRP na área da engenharia civil. A progressiva utilização dos varões de GFRP, nas estruturas de betão armado, surge não só no sentido de colmatar as deficiências apresentadas pelo aço convencional, mas igualmente, pelas características que lhe são inerentes, das quais se destacam, entre outras, a elevada resistência à tracção e à fadiga, a elevada resistência química, a sua não condutividade electromagnética e corrosibilidade nula e o seu baixo peso próprio. Contudo, o comportamento frágil consequente do reduzido módulo de elasticidade, o custo início elevado e a falta de códigos de dimensionamento, têm tardado a sua aplicação generalizada. Neste contexto, procede-se no presente documento à elaboração de um Estado da Arte, com intuito de analisar o ponto de situação dos conhecimentos, seguida da apresentação da filosofia de dimensionamento e da descrição das propriedades físicas e mecânicas dos varões de GFRP. No sentido de avaliar o Estado Limite Último (E.L.U.) e o Estado Limite de Serviço (E.L.S.), dos elementos de betão armado com GFRP, realiza-se uma exposição dos modelos de dimensionamento sugeridos pelo ACI 440.1R-06 [3], pelo Fib-Bulletin 40 [21] e pelo ISIS Manual No.3 [25]. Por fim, dimensiona-se três elementos estruturais de betão armado com GFRP, com o objectivo de delinear as principais diferenças entre as armaduras de aço e de GFRP. Os exemplos de aplicação efectuados permitiram concluir, que de facto, o E.L.S. é maioritariamente condicionante neste tipo de estruturas, devido ao reduzido módulo de elasticidade, que afecta significativamente a deformação.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Desenvolvimento de pastas de cimento flexíveis para poços de petróleo submetidos à injeção de vapor utilizando látex do tipo SBR

Novel cementing materials formulations containing flexible polymeric admixtures have been studied aiming at improving the mechanical behavior of oil well cement slurries submitted to steam injection. However, research activities in this sector are still under development. The steam injected directly into the well causes casing dilation, which after a reduction in temperature, tends to return to its original dimensions, resulting in crack formation and hydraulic isolation loss of the well, which will result in shortening of well life. In this scenario, the objective of the present study was to evaluate the mechanical behavior of Portland-based slurries containing SBR latex, applied in oil well cementing of wells submitted to steam injection. Were formulated slurries with densities of 1.797 g/cm3 (15.0 lb/Gal) and 1.869 g/cm3 (15.6 lb/Gal), containing admixtures with a latex concentration of 0; 66.88; 133.76; 200.64 and 267.52 L/m3 (0, 0.5, 1.0, 1.5 and 2.0 gpc). Tests including rheology, fluid loss control, thickening time, API compressive strength and splitting tensile strength, beyond steam injection simulation. Microstrutural characteristics of the slurries were also performed (XRD, TG, FTIR and SEM). The results showed that increasing the polymer concentration increased in the rheological properties and fluid loss, and a decrease in the elasticity modulus of the cement slurries. The results obtained showed that the slurries can be applied in cementing operations of oil wells submitted to steam injection.

Estudo morfológico da blenda polimérica poli(metacrilato de metila)/poli(tereftalato de etileno) reciclado (PMMA/PET)

Among the options for plastics modification more convenient, both from a technical-scientific and economic, is the development of polymer blends by processing in the molten state. This work was divide into two stages, with the aim to study the phase morphology of binary blend PMMA / PET blend and this compatibilized by the addition of the poly(methyl methacrylate-co-glycidyl methacrylate-co-ethyl acrylate) copolymer (MMA-GMA-EA). In the first stage is analyzed the morphology of the blend at a preliminary stage where we used the bottle-grade PET in a Haake torque rheometer and the effect of compatibilizer in this blend was evaluated. In the second stage the blend was processed using the recycled PET in a single screw extruder and subsequently injection molding in the shape of specimens for mechanical tests. In both stages we used a transmission electron microscopy (TEM) to observe the morphologies of the samples and an image analyzer to characterize them. In the second stage, as well as analysis by TEM, tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was performed to correlate the morphology with the mechanical properties. The samples used in morphological analyzes were sliced by cryo-ultramicrotomy technique for the analysis by TEM and the analysis by SEM and AFM, we used the flat face of the block after cut cryogenic. It was found that the size of the dispersed phase decreased with the addition of MMA-GMA-EA in blends prepared in a Haake. In the tensile test, the values of maximum tensile strength and modulus of elasticity is maintained in a range between the value of pure PMMA the pure PET, while the elongation at break was influenced by the composition by weight of the PMMA mixture. The coupling agent corroborated the results presented in the blend PMMA / PETrec / MMA-GMA-EA (80/15/5 %w/w), obtained by TEM, AFM and SEM. It was concluded that the techniques used had a good morphologic correlation, and can be confirmed for final analysis of the morphological characteristics of the blends PMMA / PET

O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

The study aimed at the treatment of attapulgite for the development and characterization of composite recycled low density polyethylene - PEBD_rec embedded with natural attapulgite - ATP_NAT, sifted - ATP_PN and attapulgite treated with sulfuric acid - ATP_TR in different compositions (1, 3 and 5%) and compared with the PEBD_rec. The atapulgitas, natural, screened and treated, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), torque rheometry, scanning electron microscopy (SEM) and traction. The composite PEBD_rec / ATP (natural, sieved and treated) were produced by mixing in the molten state in a single screw extruder matrix wire with subsequent reprocessing matrix tape. It was found that the screening of attapulgite not reduce the quantity of quartz and the acid treatment completely extracted dolomite aggregate impurities of the channels attapulgite, and increase their surface area. The addition of attapulgite in PEBD_rec acts as a catalyst, reducing the thermal stability of the polymer. The increased concentration of attapulgite, increases resistance and reduces the elongation at break and modulus of elasticity of the composite PEBD_rec / attapulgite

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Processamento e caracterização da blenda poli (metacrilato de metila) (PMMA) elastomerico e poli (tereftalato de etileno) (PET) pós-consumo

This work studied the immiscible blend of elastomeric poly(methyl methacrylate) (PMMA) with poly(ethylene terephthalate) (PET) bottle grade with and without the use of compatibilizer agent, poly(methyl methacrylate-co-glycidyl methacrylate - co-ethyl acrylate) (MGE). The characterizations of torque rheometry, melt flow index measurement (MFI), measuring the density and the degree of cristallinity by pycnometry, tensile testing, method of work essential fracture (EWF), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were performed in pure polymer and blends PMMA/PET. The rheological results showed evidence of signs of chemical reaction between the epoxy group MGE with the end groups of the PET chains and also to the elastomeric phase of PMMA. The increase in the concentration of PET reduced torque and adding MGE increased the torque of the blend of PMMA/PET. The results of the MFI also show that elastomeric PMMA showed lower flow and thus higher viscosity than PET. In the results of picnometry observed that increasing the percentage of PET resulted in an increase in density and degree crystallinity of the blends PMMA/PET. The tensile test showed that increasing the percentage of PET resulted in an increase in ultimate strength and elastic modulus and decrease in elongation at break. However, in the phase inversion, where the blend showed evidence of a co-continuous morphology and also, with 30% PET dispersed phase and compatibilized with 5% MGE, there were significant results elongation at break compared to elastomeric PMMA. The applicability of the method of essential work of fracture was shown to be possible for most formulations. And it was observed that with increasing elastomeric PMMA in the formulations of the blends there was an improvement in specific amounts of essential work of fracture (We) and a decrease in the values of specific non-essential work of fracture (βWp)