Bacillus anthracis Diversity and Geographic Potential across Nigeria, Cameroon and Chad: Further Support of a Novel West African Lineage.

Zoonoses, diseases affecting both humans and animals, can exert tremendous pressures on human and veterinary health systems, particularly in resource limited countries. Anthrax is one such zoonosis of concern and is a disease requiring greater public health attention in Nigeria. Here we describe the genetic diversity of Bacillus anthracis in Nigeria and compare it to Chad, Cameroon and a broader global dataset based on the multiple locus variable number tandem repeat (MLVA-25) genetic typing system. Nigerian B. anthracis isolates had identical MLVA genotypes and could only be resolved by measuring highly mutable single nucleotide repeats (SNRs). The Nigerian MLVA genotype was identical or highly genetically similar to those in the neighboring countries, confirming the strains belong to this unique West African lineage. Interestingly, sequence data from a Nigerian isolate shares the anthrose deficient genotypes previously described for strains in this region, which may be associated with vaccine evasion. Strains in this study were isolated over six decades, indicating a high level of temporal strain stability regionally. Ecological niche models were used to predict the geographic distribution of the pathogen for all three countries. We describe a west-east habitat corridor through northern Nigeria extending into Chad and Cameroon. Ecological niche models and genetic results show B. anthracis to be ecologically established in Nigeria. These findings expand our understanding of the global B. anthracis population structure and can guide regional anthrax surveillance and control planning.

Gene sequences of the lichen Cetraria aculeata

Lichens are symbioses between fungi (mycobionts) and photoautotrophic green algae or cyanobacteria (photobionts). Many lichens occupy large distributional ranges covering several climatic zones. So far, little is known about the large-scale phylogeography of lichen photobionts and their role in shaping the distributional ranges of lichens. We studied south polar, temperate and north polar populations of the widely distributed fruticose lichen Cetraria aculeata. Based on the DNA sequences from three loci for each symbiont, we compared the genetic structure of mycobionts and photobionts. Phylogenetic reconstructions and Bayesian clustering methods divided the mycobiont and photobiont data sets into three groups. An AMOVA shows that the genetic variance of the photobiont is best explained by differentiation between temperate and polar regions and that of the mycobiont by an interaction of climatic and geographical factors. By partialling out the relative contribution of climate, geography and codispersal, we found that the most relevant factors shaping the genetic structure of the photobiont are climate and a history of codispersal. Mycobionts in the temperate region are consistently associated with a specific photobiont lineage. We therefore conclude that a photobiont switch in the past enabled C. aculeata to colonize temperate as well as polar habitats. Rare photobiont switches may increase the geographical range and ecological niche of lichen mycobionts by associating them with locally adapted photobionts in climatically different regions and, together with isolation by distance, may lead to genetic isolation between populations and thus drive the evolution of lichens.

Nannofossil assemblages and flux rates during the late Oligocene-early Miocene

This study investigates abundance variations in Noelaerhabdaceae assemblages during the late Oligocene-early Miocene at three subtropical sites in the Atlantic and Pacific oceans (DSDP Sites 516, 608 and 588). At these three sites, nannofossil assemblages were characterized by the successive high proportion of Cyclicargolithus, Dictyococcites and Reticulofenestra. Local paleoceanographic changes, such as the input of nutrient-poor water masses, might explain shifts in ecological prominence within the Noelaerhabdaceae at DSDP Site 516 (South Atlantic). But the similar timing of a decline in Cyclicargolithus at the three studied sites more likely corresponds to a global process. Here, we explore possible causes for this long-term taxonomic turnover. A global change in climate, associated with early Miocene glaciations, could have triggered a decline in fitness of the taxon Cyclicargolithus. The ecological niche made vacant because of the decrease in Cyclicargolithus could then have been exploited by Dictyococcites and Reticulofenestra that became prominent in the assemblages after 20.5 Ma. Alternatively, this global turnover might reflect a gradual evolutionary succession and be the result of other selection pressures, such as increased competition between Cyclicargolithus and Dictyococcites/Reticulofenestra. A diversification within Dictyococcites/Reticulofenestra, indicated by an expansion in the size variation within this group since ~ 20.5 Ma, may have contributed to the decreased fitness of Cyclicargolithus.

Raster maps for 29 environmental variables in three geographical regions

Aim: Greater understanding of the processes underlying biological invasions is required to determine and predict invasion risk. Two subspecies of olive (Olea europaea subsp. europaea and Olea europaea subsp. cuspidata) have been introduced into Australia from the Mediterranean Basin and southern Africa during the 19th century. Our aim was to determine to what extent the native environmental niches of these two olive subspecies explain the current spatial segregation of the subspecies in their non-native range. We also assessed whether niche shifts had occurred in the non-native range, and examined whether invasion was associated with increased or decreased occupancy of niche space in the non-native range relative to the native range. Location: South-eastern Australia, Mediterranean Basin and southern Africa. Methods: Ecological niche models (ENMs) were used to quantify the similarity of native and non-native realized niches. Niche shifts were characterized by the relative contribution of niche expansion, stability and contraction based on the relative occupancy of environmental space by the native and non-native populations. Results: Native ENMs indicated that the spatial segregation of the two subspecies in their non-native range was partly determined by differences in their native niches. However, we found that environmentally suitable niches were less occupied in the non-native range relative to the native range, indicating that niche shifts had occurred through a contraction of the native niches after invasion, for both subspecies. Main conclusions: The mapping of environmental factors associated with niche expansion, stability or contraction allowed us to identify areas of greater invasion risk. This study provides an example of successful invasions that are associated with niche shifts, illustrating that introduced plant species are sometimes readily able to establish in novel environments. In these situations the assumption of niche stasis during invasion, which is implicitly assumed by ENMs, may be unreasonable.

Occurrence (presence-only) of living Lophelia pertusa reefs in the Irish continental margin

The present data set was used as a training set for a Habitat Suitability Model. It contains occurrence (presence-only) of living Lophelia pertusa reefs in the Irish continental margin, which were assembled from databases, cruise reports and publications. A total of 4423 records were inspected and quality assessed to ensure that they (1) represented confirmed living L. pertusa reefs (so excluding 2900 records of dead and isolated coral colony records); (2) were derived from sampling equipment that allows for accurate (<200 m) geo-referencing (so excluding 620 records derived mainly from trawling and dredging activities); and (3) were not duplicated. A total of 245 occurrences were retained for the analysis. Coral observations are highly clustered in regions targeted by research expeditions, which might lead to falsely inflated model evaluation measures (Veloz, 2009). Therefore, we coarsened the distribution data by deleting all but one record within grid cells of 0.02° resolution (Davies & Guinotte 2011). The remaining 53 points were subject to a spatial cross-validation process: a random presence point was chosen, grouped with its 12 closest neighbour presence points based on Euclidean distance and withheld from model training. This process was repeated for all records, resulting in 53 replicates of spatially non-overlapping sets of test (n=13) and training (n=40) data. The final 53 occurrence records were used for model training.

Forest connectivity restoration through reforestation: an integrated methodology for prioritizing agricultural lands and selecting reforestation species

Forest connectivity restoration is a major goal in natural resource planning. Given the high amount of abandoned cultivated lands, setting efficient methods for the reforestation of agricultural lands offers a good opportunity to face this issue. However, reforestations must be carefully planned, which poses two main challenges. In first place, to determine those agricultural lands that, once reforested, would meet more effectively the planning goals. As a further step, in order to grant the success of the activity, it is fairly advisable to select those tree species that are more adapted to each particular environment. Here we intend to give response to both requirements by proposing a sequential and integrated methodology that has been implemented in two Spanish forest districts, which are formed by several landscape types that were previously defined and characterized. Using the software Conefor Sensinode, a powerful tool for quantifying habitat availability that is based on graph theory concepts, we determined the landscapes where forest planning should have connectivity as a major concern and, afterwards, we detected the agricultural patches that would contribute most to enhance connectivity if they were reforested. The subsequent reforestation species assessment was performed within these priority patches. Using penalized logistic regressions we fitted ecological niche models for the Spanish native tree species. The models were trained with species distribution data from the Spanish Forest Map and used climatic and lithological variables as predictors. Model predictions were used to build ordered lists of suitable species for each priority patch. The lists include dominant and non dominant tree species and allow adding biodiversity goals to the reforestation planning. The result of this combined methodology is a map of agricultural patches that would contribute most to uphold forest connectivity if they were reforested and a list of suitable tree species for each patch ordered by occurrence probability. Therefore the proposed methodology may be useful for suitable and efficient forest planning and landscape designing.

Germination ecology of the perennial Centaurium somedanum, a specialist species of mountain springs

To improve understanding of how a rare endemic species of Centaurium adapts to a specialized ecological niche, we studied the germination ecology of the mountain spring specialist, C. somedanum, a perennial species restricted to an unusual habitat for this genus. We conducted laboratory experiments with fresh seeds collected from two populations for three consecutive years, to investigate: (1) the effect of temperature and light ongermination; (2) the existence of seed dormancy; and (3) inter-population and inter-annual variation in germinability. Germination occurred only in the light and at relatively low temperatures (15?228C) with no differences between constant and alternating regimes, and a significant decrease at high temperatures (258C and 308C). We found non-deep simple morphophysiological dormancy and variation in seed germinability depending on the year of seed collection. C. somedanum diverged from the common germination characteristics of the genus in: (1) its germination at lower temperatures, which contrasts with what is generally expected in wetland species but could be adaptive in the spring habitat; and (2) its morphophysiological dormancy, which we report here for the first time in the genus and which could be an adaptation to its mountain habitat.

Evolution of the Riparian forest corridor in a large Mediterranean river system

The well-documented re-colonisation of the French large river basins of Loire and Rhone by European otter and beaver allowed the analysis of explanatory factors and threats to species movement in the river corridor. To what extent anthropogenic disturbance of the riparian zone influences the corridor functioning is a central question in the understanding of ecological networks and the definition of restoration goals for river networks. The generalist or specialist nature of target species might be determining for the responses to habitat quality and barriers in the riparian corridor. Detailed datasets of land use, human stressors and hydro-morphological characteristics of river segments for the entire river basins allowed identifying the habitat requirements of the two species for the riparian zone. The identified critical factors were entered in a network analysis based on the ecological niche factor approach. Significant responses to riparian corridor quality for forest cover, alterations of channel straightening and urbanisation and infrastructure in the riparian zone are observed for both species, so they may well serve as indicators for corridor functioning. The hypothesis for generalists being less sensitive to human disturbance was withdrawn, since the otter as generalist species responded strongest to hydro-morphological alterations and human presence in general. The beaver responded the strongest to the physical environment as expected for this specialist species. The difference in responses for generalist and specialist species is clearly present and the two species have a strong complementary indicator value. The interpretation of the network analysis outcomes stresses the need for an estimation of ecological requirements of more species in the evaluation of riparian corridor functioning and in conservation planning.

Diseño e implementación de un módulo de crecimiento bacteriano dependiente de nutrientes en el simulador GRO

Hace no más de una década que empezó a escucharse el término biología sintética. Este área de estudio emergente consiste en la ingeniería y programación de sistemas biológicos, tratando la biología como una tecnología programable a la que aplican los principios y metodologías de la ingeniería, con el fin de crear nuevas funcionalidades genéticas desde cero, procurando asÍ algún beneficio como por ejemplo, programar células bacterianas para producir biocombustibles. Sin embargo, para la creación de dichas funcionalidades es necesario conocer bien al organismo sobre el que se van a implantar. Por este motivo, los biólogos sintéticos emplean bacterias en sus estudios, ya que es la forma de vida más simple, está presente en prácticamente todos los nichos ecológicos, desempeña algunas de las funcionalidades vitales para los humanos y lo mas importante, se conoce prácticamente todo su material genético. Los experimentos son costosos en tiempo y dinero, siendo necesaria la ayuda de herramientas que faciliten esta labor, los simuladores. En PLASWIRES, proyecto europeo de biología sintética en el que se engloba este este trabajo, el simulador empleado es GRO. Sin embargo, en GRO el crecimiento de las bacterias ocurre de forma exponencial y sin restricciones, generando comportamientos poco realistas. Por ello, se ha considerado relevante en biología sintética, y en el simulador GRO en particular, disponer de un modelo de crecimiento bacteriano dependiente de los nutrientes. El desarrollo de este trabajo se centra en la implementación de un módulo de consumo de nutrientes en colonias de bacterias simuladas con GRO, introduciendo así la limitación de nutrientes y evitanto que las bacterias crezcan exponencialmente. Se han introducido nutrientes en el medio y la capacidad de consumirlos, con el objetivo de obtener un crecimiento ajustado al que ocurre en la naturaleza. Además, se ha desarrollado en GRO una nueva función de adquisición de volumen, que condiciona el volumen adquirido por cada bacteria en función de los nutrientes. La implentación de las dos aportaciones presentadas ha supuesto la adición de funcionalidad extra a GRO, convirtiéndolo en el único simulador de bacterias que tiene en cuenta el crecimiento bacteriano dependiente de nutrientes.---ABSTRACT---It has been in this last decade that the synthetic biology term began to be heard. This emergent area of study consists in the engineering and programming of biological systems, dealing with biology as a programable technology in which the engineering principles and methodologies are applied in order to create novel genetic functinalities from scratch, obtaining some advatages such as programmed bacteria in order to produce biofuels. However, to create this functionalities, it is necessary to know well the organisms in which they are going to be implemented. For this reason, synthetic biology researchers use bacteria, because it is the simplest life form, it can be found in almost all the ecological niche, it does some vital function to humans and, most important, almost all of its genetic information is known. Experiments are expensive in time and money, making it necessary to use tools to ease this task: the simulators. In PLASWIRES, the european synthetic biology project in which this work is included, the simulator used is GRO. However, the bacterial growth in GRO is exponential and it does not have restrictions, generating unrealistic behaviours. Therefore, it has been considered relevant in synthetic biology, and in a particular way in GRO, to provide a bacterial growth model dependent on nutrient. This work focuses on the implementation of a nutrient consumption module in bacteria colonies simulated with GRO, introducing a nuntrient limitation and avoiding the bacteria exponential growth. The module introduces nutrients and the capacity for bacteria to consume them, aiming to obtain realistic growth simulations that fit the observations made in nature. Moreover, an adquisition volumen function has been developed in GRO, determining the volumen depending on nutrients. This two contributions make GRO the only bacteria simulator that computes growth depending on nutrients

Metodología para la estimación de indicadores armonizados a partir de los inventarios forestales nacionales europeos con especial énfasis en la biodiversidad forestal

Durante las últimas décadas el objetivo principal de la silvicultura y la gestión forestal en Europa ha pasado de ser la producción de madera a ser la gestión sostenible de los ecosistemas, por lo que se deben considerar todos los bienes y servicios que proporcionan los bosques. En consecuencia, es necesario contar con información forestal periódica de diversos indicadores forestales a nivel europeo para apoyar el desarrollo y la implementación de políticas medioambientales y que se realice una gestión adecuada. Para ello, se requiere un seguimiento intensivo sobre el estado de los bosques, por lo que los Inventarios Forestales Nacionales (IFN), (principal fuente de información forestal a gran escala), han aumentado el número de variables muestreadas para cumplir con los crecientes requerimientos de información. Sin embargo, las estimaciones proporcionadas por los diferentes países no son fácilmente comparables debido a las diferencias en las definiciones, los diseños de muestreo, las variables medidas y los protocolos de medición. Por esto, la armonización de los datos que proporcionan los diferentes países es fundamental para la contar con una información forestal sólida y fiable en la Unión europea (UE). La presente tesis tiene dos objetivos principales: (i) establecer el diseño de una metodología para evaluar la biodiversidad forestal en el marco del Inventario forestal nacional de España teniendo en cuenta las diferentes iniciativas nacionales e internacionales, con el objetivo de producir estimaciones comparables con las de otros países de la UE y (ii) armonizar los indicadores más relevantes para satisfacer los requerimientos nacionales e internacionales. Como consecuencia del estudio realizado para alcanzar el primer objetivo, la metodología diseñada para estimar la biodiversidad fue adoptada por el Tercer Inventario forestal nacional. Ésta se componía de indicadores agrupados en: cobertura del suelo, composición de árboles y especies de arbustos, riqueza de especies herbáceas y helechos, especies amenazadas, estructura, madera muerta, y líquenes epífitos. Tras el análisis del diseño metodológico y de los datos proporcionados, se observó la conveniencia de modificarla con el fin de optimizar los costes, viabilidad, calidad y cantidad de los datos registrados. En consecuencia, en el Cuarto Inventario Forestal Nacional se aplica una metodología modificada, puesto que se eliminó el muestreo de especies herbáceas y helechos, de líquenes epífitos y de especies amenazadas, se modificaron los protocolos de la toma de datos de estructura y madera muerta y se añadió el muestreo de especies invasoras, edad, ramoneo y grado de naturalidad de la masa. En lo que se refiere al segundo objetivo, se ha avanzado en la armonización de tres grupos de variables considerados como relevantes en el marco de los IFN: los indicadores de vegetación no arbórea (que juegan un papel relevante en los ecosistemas, es donde existe la mayor diversidad de plantas y hasta ahora no se conocían los datos muestreados en los IFN), la determinación de los árboles añosos (que tienen un importante papel como nicho ecológico y su identificación es especialmente relevante para la evaluación de la biodiversidad forestal) y el bosque disponible para el suministro de madera (indicador básico de los requerimientos internacionales de información forestal). Se llevó a cabo un estudio completo de la posible armonización de los indicadores de la vegetación no arbórea en los IFN. Para ello, se identificaron y analizaron las diferentes definiciones y diseños de muestreo empleados por los IFN, se establecieron definiciones de referencia y se propusieron y analizaron dos indicadores que pudiesen ser armonizados: MSC (mean species cover) que corresponde a la media de la fracción de cabida cubierta de cada especie por tipo de bosque y MTC (mean total cover). Se estableció una nueva metodología que permite identificar los árboles añosos con los datos proporcionados por los inventarios forestales nacionales con el objetivo de proporcionar una herramienta eficaz para facilitar la gestión forestal considerando la diversidad de los sistemas forestales. Se analizó el concepto de "bosque disponible para el suministro de madera" (FAWS) estudiando la consistencia de la información internacional disponible con el fin de armonizar su estimación y de proporcionar recomendaciones para satisfacer los requerimientos europeos. Como resultado, se elaboró una nueva definición de referencia de FAWS (que será adoptada por el proceso paneuropeo) y se analiza el impacto de la adopción de esta nueva definición en siete países europeos. El trabajo realizado en esta tesis, puede facilitar el suministrar y/o armonizar parcial o totalmente casi la mitad de los indicadores de información forestal solicitados por los requerimientos internacionales (47%). De éstos, prácticamente un 85% tienen relación con los datos inventariados empleando la metodología propuesta para la estimación de la biodiversidad forestal, y el resto, con el establecimiento de la definición de bosque disponible para el suministro de madera. No obstante, y pese a que esta tesis supone un avance importante, queda patente que las necesidades de información forestal son cambiantes y es imprescindible continuar el proceso de armonización de los IFN europeos. ABSTRACT Over the last few decades, the objectives on forestry and forest management in Europe have shifted from being primarily focused on wood production to sustainable ecosystem management, which should consider all the goods and services provided by the forest. Therefore, there is a continued need for forest indicators and assessments at EU level to support the development and implementation of a number of European environmental policies and to conduct a proper forest management. To address these questions, intensive monitoring on the status of forests is required. Therefore, the scope of National Forest Inventories (NFIs), (primary source of data for national and large-area assessments), has been broadened to include new variables to meet these increasing information requirements. However, estimates produced by different countries are not easily comparable because of differences in NFI definitions, plot configurations, measured variables, and measurement protocols. As consequence, harmonizing data produced at national level is essential for the production of sound EU forest information. The present thesis has two main aims: (i) to establish a methodology design to assess forest biodiversity in the frame of the Spanish National Forest Inventory taking into account the different national and international initiatives with the intention to produce comparable estimates with other EU countries and (ii) to harmonize relevant indicators for national and international requirements. In consequence of the work done related to the first objective, the established methodology to estimate forest biodiversity was adopted and launched under the Third National Forest Inventory. It was composed of indicators grouped into: cover, woody species composition, richness of herbaceous species and ferns, endangered species, stand structure, dead wood, and epiphytic lichens. This methodology was analyzed considering the provided data, time costs, feasibility, and requirements. Consequently, in the ongoing Fourth National Forest Inventory a modified methodology is applied: sampling of herbaceous species and ferns, epiphytic lichens and endangered species were removed, protocols regarding structure and deadwood were modified, and sampling of invasive species, age, browsing impact and naturalness were added. As regards the second objective, progress has been made in harmonizing three groups of variables considered relevant in the context of IFN: Indicators of non-tree vegetation (which play an important role in forest ecosystems, it is where the highest diversity of plants occur and so far the related sampled data in NFIs were not known), the identification of old-growth trees (which have an important role as ecological niche and its identification is especially relevant for the assessment of forest biodiversity) and the available forest for wood supply (basic indicator of international forestry information requirements). A complete analysis of ground vegetation harmonization possibilities within NFIs frame was carried on by identifying and analyzing the different definitions and sampling techniques used by NFIs, providing reference definitions related to ground vegetation and proposing and analyzing two ground vegetation harmonized indicators: “Mean species cover” (MSC) and “Mean total cover” (MTC) for shrubs by European forest categories. A new methodology based on NFI data was established with the aim to provide an efficient tool for policy makers to estimate the number of old-growth trees and thus to be able to perform the analysis of the effect of forest management on the diversity associated to forest systems. The concept of “forest available for wood supply” (FAWS) was discussed and clarified, analyzing the consistency of the available international information on FAWS in order to provide recommendations for data harmonization at European level regarding National Forest Inventories (NFIs). As a result, a new reference definition of FAWS was provided (which will be adopted in the pan-European process) and the consequences of the use of this new definition in seven European countries are analyzed. The studies carried on in this thesis, can facilitate the supply and/or harmonization partially or fully of almost half of the forest indicators (47%) needed for international requirements. Of these, nearly 85% are related to inventoried data using the proposed methodology for the estimation of forest biodiversity, and the rest, with the establishment of the definition of forest available for wood supply. However, despite this thesis imply an important development, forest information needs are changing and it is imperative to continue the process of harmonization of European NFIs.

Macroecología y ecoinformática: sesgos, errores y predicciones en el modelado de distribuciones

Hoy en día es común estudiar los patrones globales de biodiversidad a partir de las predicciones generadas por diferentes modelos de nicho ecológico. Habitualmente, estos modelos se calibran con datos procedentes de bases de datos de libre acceso (e.g. GBIF). Sin embargo, a pesar de la facilidad de descarga y de la accesibilidad de los datos, la información almacenada sobre las localidades donde están presentes las especies suele tener sesgos y errores. Estos problemas en los datos de calibración pueden modificar drásticamente las predicciones de los modelos y con ello pueden enmascarar los patrones macroecológicos reales. El objetivo de este trabajo es investigar qué métodos producen resultados más precisos cuando los datos de calibración incluyen sesgos y cuáles producen mejores resultados cuando los datos de calibración tienen, además de sesgos, errores. Para ello creado una especie virtual, hemos proyectado su distribución en la península ibérica, hemos muestreado su distribución de manera sesgada y hemos calibrado dos tipos de modelos de distribución (Bioclim y Maxent) con muestras de distintos tamaños. Nuestros resultados indican que cuando los datos sólo están sesgados, los resultados de Bioclim son mejores que los de Maxent. Sin embargo, Bioclim es extremadamente sensible a la presencia de errores en los datos de calibración. En estas situaciones, el comportamiento de Maxent es mucho más robusto y las predicciones que proporciona son más ajustadas.

Community dynamics of stabilized dune xerophytic shrubs

Tese de doutoramento, Biologia (Ecologia), Universidade de Lisboa, Faculdade de Ciências, 2016

Factores determinantes de la variabilidad espacial de anchoveta peruana (Engraulis ringens) en el Pacífico Sudoriental

Los modelos de nicho ecológico permiten estudiar el efecto del ambiente sobre la distribución de las especies, relacionando datos de su distribución con información ambiental. El objetivo del presente estudio fue estimar el nicho ecológico y describir la variabilidad en la distribución espacial de la anchoveta (Engraulis ringens) mediante el uso de modelos estadísticos de nicho ecológico. Se trabajó con dos enfoques de análisis: por stocks (norte, centro y sur) en el Pacífico Sudoriental (PSO) y por estadios de desarrollo (pre-reclutas, reclutas y adultos) en la costa peruana. El modelo de nicho ecológico utilizó modelos aditivos generalizados, estimaciones georeferenciadas de presencia y ausencia de anchoveta e información de cuatro variables ambientales (temperatura superficial del mar, salinidad superficial del mar, concentración de clorofila a superficial y la profundidad de la oxiclina) entre los a˜nos 1985 y 2008. Se encontró que no existen diferencias en los nichos ecológicos de los tres stocks de anchoveta siendo los modelos que utilizaron la información de la anchoveta en todo el PSO los que lograron modelar el nicho de manera correcta. Respecto al análisis por estadios, se evidenció que cada estadio de desarrollo tiene distintas tolerancias a las variables ambientales consideradas en este trabajo, siendo los nichos de estadios menos desarrollados los que estuvieron incluidos dentro de los estadios más desarrollados. Se recomienda realizar estudios separados para cada estadio de desarrollo, lo cual permita comprender mejor las relaciones ecológicas encontradas en los resultados del nicho ecológico. Además se recomienda realizar simulaciones con modelos de nicho que incluyan más variables ambientales, las cuales puedan mejorar los mapas de distribución espacial de la anchoveta para los dos enfoques de análisis.

Obtenção e caracterização de sistemas particulados de quitosana para liberação gástrica de amoxicilina

The infection caused by Helicobacter pylori (H. pylori) is associated with gastroduodenal inflammation can lead to the development of gastritis, gastric or duodenal ulcer and gastric cancer (type 1 carcinogen for stomach cancer). Amoxicillin is used as first-line therapy in the treatment of H. pylori associated to metronidazole or clarithromycin, and a proton pump inhibitor. However, the scheme is not fully effective due to inadequate accumulation of antibiotics in gastric tissue, inadequate efficacy of ecological niche of H. pylori, and other factors. In this context, this study aimed to obtaining and characterization of particulate systems gastrorretentivos chitosan - amoxicillin aiming its use for treatment of H. pylori infections. The particles were obtained by the coacervation method / precipitation using sodium sulfate as precipitating agent and crosslinking and two techniques: addition of amoxicillin during preparation in a single step and the sorption particles prior to amoxycillin prepared by coacervation / precipitation and spray drying. The physicochemical characterization of the particles was performed by SEM, FTIR, DSC, TG and XRD. The in vitro release profile of amoxycillin free and incorporated in the particles was obtained in 0.1 N HCl (pH = 1.2). The particles have higher encapsulation efficiency to 80% spherical shape with interconnected particles or adhered to each other, the nanometric diameter to the systems obtained by coacervation / precipitation and fine for the particles obtained by spray drying. The characterization by FTIR, DSC and XRD showed that the drug was incorporated into the nanoparticles dispersed in the polymeric matrix. Thermal analysis (TG and DSC) indicated that encapsulation provides greater heat stability to the drug. Amoxicillin encapsulated in nanoparticles had slower release compared to free drug. The particles showed release profile with a faster initial stage (burst effect) reaching a maximum at 30 minutes 35% of amoxicillin for the system in 1: 1 ratio relative to the polymer and 80% for the system in the ratio 2: 1. Although simple and provide high encapsulation efficiency of amoxicillin, the process of coacervation, precipitation in one step using sodium sulfate as precipitant / cross-linker must be optimized in order to adjust the release kinetics according to the intended application.

Systématique évolutive et biogéographie de Angraecum (Orchidaceae, Angraecinae) à Madagascar

Le genre Angraecum est un groupe d’orchidées tropicales qui compte environ 221 espèces réparties en Afrique subsaharienne, dans l’ouest de l’Océan Indien, et au Sri Lanka. Plus de la moitié des espèces se trouvent à Madagascar, dont au moins 90% sont endémiques à l’île. L’étude systématique et taxonomique du genre Angraecum a toujours été problématique à cause de sa grande diversité morphologique. Pour faciliter la classification, des sections ont été établies dont la plus connue est celle de Garay (1973), qui regroupe les espèces sous 19 sections. Plusieurs analyses phylogénétiques avaient montré que le genre Angraecum et les sections de Garay ne sont pas monophylétiques. Cependant, aucune révision systématique n’a été apportée à cause du faible échantillonnage dans ces analyses. En incorporant un plus grand nombre d'espèces et en ajoutant d’autres caractères morphologiques dans l’analyse, nous avons apporté une plus grande résolution à la reconstruction phylogénétique du groupe. Cette résolution concerne surtout les nœuds plus profonds qui représentent les différents clades à l’intérieur d'Angraecum, qui correspondent à des sections naturelles. A partir de ces clades, nous avons redéfini 14 sections monophylétiques toute en reconnaissant cinq nouvelles. Grâce à cette nouvelle phylogénie d'Angraecum, nous avons pu étudier la diversification du genre et de la sous-tribu Angraecinae en utilisant des méthodes macroévolutives, notamment les roles joués par les traits floraux dans la spéciation, tout en l'interprétant grâce aux histoires géologique et paléoclimatique. Le modèle de diversification chez les Angraecinae semble avoir été celui communément rencontré dans les forêts tropicales humides, c’est-à-dire une diversification par accumulation graduelle d’espèces à travers le temps et non pas une radiation adaptative rapide, comme souvent observée chez des lignées animales malgaches. Plusieurs caractères morphologiques jouent un rôle important dans la diversification des espèces d'Angraecum. Le début de la diversification d'Angraecum à Madagascar coïncide avec le mouvement progressif de l’île vers le nord, l’établissement de la mousson dans la partie nord de l’île durant le Miocène, et l’expansion de la forêt tropicale malgache pendant cette période. Notre étude de l’histoire biogéographique des Angraecinae suggère une origine malgache de la sous-tribu et du genre Angraecum. On observe de la dispersion à longue distance à partir de Madagascar vers le reste du monde dans le genre Angraecum. La forêt tropicale humide du Nord Est de Madagascar est le point de départ de la diversification des espèces d'Angraecum. Le premier événement de dispersion a débuté à l’intérieur de l’île vers la fin du Miocène. Cet évènement est marqué par une migration du Nord Est vers le centre de Madagascar. Par ailleurs, la majorité des événements de dispersion à longue distance se sont produits durant le Pliocène-Pléistocène à partir soit du centre, soit du Nord Est de l'île. On assiste à des migrations indépendantes vers l’Afrique de l’est et les Comores d’une part, et vers les Mascareignes d’autre part. Un seul événement fondateur ayant conduit à l’apparition de la section Hadrangis est observé dans les Mascareignes. La saison cyclonique joue un rôle significatif dans la dispersion à longue distance des graines d’orchidées, comparée aux vents dominants qui soufflent dans la région ouest de l’Océan Indien, notamment l’alizé et la mousson. La similarité des niches écologiques a facilité l’expansion des espèces d'Angraecum dans les Comores et les Mascareignes.