Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy : microstructure and texture evolution

The microstructure and crystallographic texture development in an austenitic Ni-30 pct Fe model alloy was investigated within the dynamic recrystallization (DRX) regime using hot torsion testing. The prominent DRX nucleation mechanism was strain-induced grain boundary migration accompanied by the formation of large-angle sub-boundaries and annealing twins. The increase in DRX volume fraction occurred through the formation of multiple twinning chains. With increasing strain, the pre-existing Σ3 twin boundaries became gradually converted to general boundaries capable of acting as potent DRX nucleation sites. The texture characteristics of deformed grains resulted from the preferred consumption of high Taylor factor components by new recrystallized grains. Similarly, the texture of DRX grains was dominated by low Taylor factor components as a result of their lower consumption rate during the DRX process. The substructure of deformed grains was characterized by “organized,” banded subgrain arrangements, while that of the DRX grains displayed “random,” more equiaxed subgrain/cell configurations.

The dynamic relationship between real exchange rates, real interest rates and foreign exchange reserves : empirical evidence from China

This article examines the long-run and short-run relationship between China's real exchange rate, foreign exchange reserves and the real interest rate differential between China and the United States using monthly data from 1980 to 2002. Extensive testing for unit roots allowing for up to two structural breaks in the trend indicates that the variables are not integrated of the same order. Thus, the bounds testing approach to cointegration is used, which finds that there is a single long-run relationship between the three variables. In the long run the real exchange rate has a statistically significant positive effect on foreign exchange reserves. The coefficient on the real interest rate differential is also positive, but is statistically insignificant. In the short-run it is found that the relationship between the real exchange rate, real interest rate differential and foreign exchange reserves is non-monotonic.

Texture and substructure characteristics of dynamic recrystallization in a Ni–30%Fe austenitic model alloy

The substructure and texture development during dynamic recrystallization (DRX) of an austenitic Ni–30%Fe model alloy was investigated using hot torsion testing. The current results revealed that the DRX texture was dominated by grains with a low Taylor factor component. This was related to the preferred nucleation and lower consumption rates of these grains during DRX. The substructure of DRX grains was ‘‘random” in character and displayed complex subgrain/cell arrangements that largely depended on grain orientation.

Robust correctness testing for digital forensic tools

In previous work, the authors presented a theoretical lower bound on the required number of testing runs for performance testing of digital forensic tools. We also demonstrated a practical method of testing showing how to tolerate both measurement and random errors in order to achieve results close to this bound. In this paper, we extend the previous work to the situation of correctness testing. The contribution of this methodology enables the tester to achieve correctness testing results of high quality from a manageable number of observations and in a dynamic but controllable way. This is of particular interest to forensic testers who do not have access to sophisticated equipment and who can allocate only a small amount of time to testing.

Robust performance testing for digital forensic tools

In previous work, the authors presented a theoretical lower bound on the required number of testing runs for performance testing of digital forensic tools. However, experimental errors are inevitable in laboratory settings, occurring as measurement errors or as random errors and can result in practical situations where the number of testing runs is far from the theoretical bound. This paper adapts our former work to tolerate such errors in the testing results. The contribution of our new methodology enables the tester to achieve performance testing results of high quality from a manageable number of observations and in a dynamic but controllable way. This is of particular interest to forensic testers who do not have access to sophisticated equipment and who can allocate only a small amount of time to testing.

Driver recognition based on dynamic handgrip pattern on steeling wheel

This paper proposes a novel biometric authentication method based on the recognition of drivers' dynamic handgrip on steering wheel. A pressure sensitive mat mounted on a steering wheel is employed to collect handgrip data exerted by the hands of drivers who intend to start the vehicle. Then, the likelihood-ratio-based classifier is designed to distinguish rightful driver of a car after analyzing their inherent dynamic features of grasping. The experimental results obtained in this study show that mean acceptance rates of 85.4% for the trained subjects and mean rejection rates of 82.65% for the un-trained ones are achieved by the classifier in the two batches of testing. It can be concluded that the driver verification approach based on dynamic handgrip recognition on steering wheel is a promising biometric technology and will be further explored in the near future in smart car design.

Estimation and extrapolation of optimal treatment and testing strategies

We review recent developments in the estimation of an optimal treatment strategy or regime from longitudinal data collected in an observational study. We also propose novel methods for using the data obtained from an observational database in one health-care system to determine the optimal treatment regime for biologically similar subjects in a second health-care system when, for cultural, logistical, or financial reasons, the two health-care systems differ (and will continue to differ) in the frequency of, and reasons for, both laboratory tests and physician visits. Finally, we propose a novel method for estimating the optimal timing of expensive and/or painful diagnostic or prognostic tests. Diagnostic or prognostic tests are only useful in so far as they help a physician to determine the optimal dosing strategy, by providing information on both the current health state and the prognosis of a patient because, in contrast to drug therapies, these tests have no direct causal effect on disease progression. Our new method explicitly incorporates this no direct effect restriction.

Deformation behaviour of a commercial pure titanium alloy during hot compression testing

The flow curve behaviour and microstructure evolution of commercially pure titanium (CP-Ti) through uniaxial hot compression was investigated at 850 °C and a strain rate of 0.1/s. Electron back scattered diffraction (EBSD) was employed to characterize the microstructure and crystallographic texture development for different thermomechanical conditions. The stress-strain curves of CP-Ti alloy under hot compression displayed a typical flow behaviour of metals undergoing dynamic recrystallization (DRX), which resulted in grain refinement. The critical strain for the onset of DRX was 0.13 using the double differentiation analysis technique. It was also revealed that the texture was markably altered during hot deformation. © (2014) Trans Tech Publications, Switzerland.

Dynamic weight-bearing assessment of pain in knee osteoarthritis: a reliability and agreement study

Purpose: To evaluate the reliability, agreement and smallest detectable change in a measurement instrument for pain and function in knee osteoarthritis; the Dynamic weight-bearing Assessment of Pain (DAP). Methods: The sample size was set to 20 persons, recruited from the outpatient osteoarthritis clinic at Frederiksberg Hospital, Copenhagen. Two physiotherapists tested all participants during two visits; at the first visit, one single DAP (including four scores) was conducted by rater one; at the second visit, DAP was conducted by both raters one and two in randomized order with concealed allocation. The time interval was approximately 1.5 h. Measurement error was estimated by standard error of measurement (SEM). The intra- and inter-rater reliability was estimated by Intra-class Correlation Coefficients for agreement based on a two-way ANOVA with random effects (single measures ICC 2.1). Smallest detectable change (SDC) and limits of agreement were calculated.Results: The pain score showed excellent reliability in terms of ICC (intra-rater 0.93, CI 0.83–0.97, inter-rater 0.91, CI 0.78–0.96), low SEM (intra-rater 0.70, inter-rater 0.86, on a scale from 0 to 10), and acceptable SDC for intra-rater test (1.95). The three knee bend scores all had ICC above 0.50, showing fair-to-good reliability. None of the knee bend scores showed acceptable SEM and SDC. Conclusions: The reproducibility of the DAP pain score meets the demands for use in clinical practice and research. The total knee bend could be useful for motivational purpose in clinical use. Testing of other psychometric properties of the DAP is pending.

Development of a dynamic surface roughness monitoring system based on artificial neural networks (ANN) in milling operation

Dynamic surface roughness prediction during metal cutting operations plays an important role to enhance the productivity in manufacturing industries. Various machining parameters such as unwanted noises affect the surface roughness, whatever their effects have not been adequately quantified. In this study, a general dynamic surface roughness monitoring system in milling operations was developed. Based on the experimentally acquired data, the milling process of Al 7075 and St 52 parts was simulated. Cutting parameters (i.e., cutting speed, feed rate, and depth of cut), material type, coolant fluid, X and Z components of milling machine vibrations, and white noise were used as inputs. The original objective in the development of a dynamic monitoring system is to simulate wide ranges of machining conditions such as rough and finishing of several materials with and without cutting fluid. To achieve high accuracy of the resultant data, the full factorial design of experiment was used. To verify the accuracy of the proposed model, testing and recall/verification procedures have been carried out and results showed that the accuracy of 99.8 and 99.7 % were obtained for testing and recall processes.

Detection of dynamic background due to swaying movements from motion features

Dynamically changing background (dynamic background) still presents a great challenge to many motion-based video surveillance systems. In the context of event detection, it is a major source of false alarms. There is a strong need from the security industry either to detect and suppress these false alarms, or dampen the effects of background changes, so as to increase the sensitivity to meaningful events of interest. In this paper, we restrict our focus to one of the most common causes of dynamic background changes: 1) that of swaying tree branches and 2) their shadows under windy conditions. Considering the ultimate goal in a video analytics pipeline, we formulate a new dynamic background detection problem as a signal processing alternative to the previously described but unreliable computer vision-based approaches. Within this new framework, we directly reduce the number of false alarms by testing if the detected events are due to characteristic background motions. In addition, we introduce a new data set suitable for the evaluation of dynamic background detection. It consists of real-world events detected by a commercial surveillance system from two static surveillance cameras. The research question we address is whether dynamic background can be detected reliably and efficiently using simple motion features and in the presence of similar but meaningful events, such as loitering. Inspired by the tree aerodynamics theory, we propose a novel method named local variation persistence (LVP), that captures the key characteristics of swaying motions. The method is posed as a convex optimization problem, whose variable is the local variation. We derive a computationally efficient algorithm for solving the optimization problem, the solution of which is then used to form a powerful detection statistic. On our newly collected data set, we demonstrate that the proposed LVP achieves excellent detection results and outperforms the best alternative adapted from existing art in the dynamic background literature.

The effects of circadian rhythmicity of salivary cortisol and testosterone on maximal isometric force, maximal dynamic force, and power output

The study investigated the effects of circadian rhythm of cortisol (C) and testosterone (T) on maximal force production (Fpeak) and power output (Ppeak). Twenty male university students (mean age = 23.8 ± 3.6 years, height = 177.5 ± 6.4 cm, weight = 78.9 ± 11.2 kg) performed 4 time-of-day testing sessions consisting of countermovement jumps (CMJs), squat jumps (SJ), isometric midthigh pulls (IMTPs), and a 1-repetition maximum (1RM) squat. Saliva samples were collected at 0800, 1200, 1600, and 2000 hours to assess T and C levels on each testing day. Session rate-of-perceived exertion (RPE) scores were collected after each session. The results showed that Fpeak and Ppeak presented a clear circadian rhythm in CMJ and IMTP but not in SJ. One repetition maximum squat did not display a clear circadian rhythm. Session RPE scores collected at 0800 and 2000 hours were significantly (p ≤ 0.05) higher than those obtained at 1200 and 1600 hours. Salivary T and C displayed a clear circadian rhythm with highest values at 0800 hours and lowest at 2000 hours; however, no significant correlation was found between T and C with Fpeak and Ppeak. A very strong correlation was found between Taural with Fpeak of CMJ and IMTP and Ppeak of CMJ (r = 0.86, r = 0.84 and r = 0.8, p ≤ 0.001). The study showed the existence of a circadian rhythm in Fpeak and Ppeak in CMJ and IMTP. The evidence suggests that strength and power training or testing should be scheduled later during the day. The use of Taural seemed to be a more effective indicator of physical performance than hormonal measures, and the use of session RPE should also be closely monitored because it may present a circadian rhythm.

A Common-feature approach for testing present-value restrictions with financial data

It is well known that cointegration between the level of two variables (labeled Yt and yt in this paper) is a necessary condition to assess the empirical validity of a present-value model (PV and PVM, respectively, hereafter) linking them. The work on cointegration has been so prevalent that it is often overlooked that another necessary condition for the PVM to hold is that the forecast error entailed by the model is orthogonal to the past. The basis of this result is the use of rational expectations in forecasting future values of variables in the PVM. If this condition fails, the present-value equation will not be valid, since it will contain an additional term capturing the (non-zero) conditional expected value of future error terms. Our article has a few novel contributions, but two stand out. First, in testing for PVMs, we advise to split the restrictions implied by PV relationships into orthogonality conditions (or reduced rank restrictions) before additional tests on the value of parameters. We show that PV relationships entail a weak-form common feature relationship as in Hecq, Palm, and Urbain (2006) and in Athanasopoulos, Guillén, Issler and Vahid (2011) and also a polynomial serial-correlation common feature relationship as in Cubadda and Hecq (2001), which represent restrictions on dynamic models which allow several tests for the existence of PV relationships to be used. Because these relationships occur mostly with nancial data, we propose tests based on generalized method of moment (GMM) estimates, where it is straightforward to propose robust tests in the presence of heteroskedasticity. We also propose a robust Wald test developed to investigate the presence of reduced rank models. Their performance is evaluated in a Monte-Carlo exercise. Second, in the context of asset pricing, we propose applying a permanent-transitory (PT) decomposition based on Beveridge and Nelson (1981), which focus on extracting the long-run component of asset prices, a key concept in modern nancial theory as discussed in Alvarez and Jermann (2005), Hansen and Scheinkman (2009), and Nieuwerburgh, Lustig, Verdelhan (2010). Here again we can exploit the results developed in the common cycle literature to easily extract permament and transitory components under both long and also short-run restrictions. The techniques discussed herein are applied to long span annual data on long- and short-term interest rates and on price and dividend for the U.S. economy. In both applications we do not reject the existence of a common cyclical feature vector linking these two series. Extracting the long-run component shows the usefulness of our approach and highlights the presence of asset-pricing bubbles.

Method for estimating railroad track settlements due to dynamic traffic loads

This paper is the result of real-scale physical modeling study designed to simulate the load-deformation characteristics of railroad foundation systems that include the railroad ties, the ballast, and the sub-base layers of a railroad embankment. The study presents comparisons of the application of dynamic loads of 100kN on the rails, and the resulting deformations during a 500,000 cycle testing period for three rail support systems; wood, concrete and steel. The results show that the deformation curve has an exponential shape, with the larger portion of the deformation occurring during the first 50,000 load cycles followed by a tendency to stabilize between 100,000 to 500,000 cycles. These results indicate that the critical phase of deformations of a new railroad is within the first 50,000 cycles of loading, and after that, it slowly attenuates as it approaches a stable value. The paper also presents empirically derived formulations for the estimation of the deformations of the rail supports as a result of rail traffic.