Delay time detection and accommodation for a networked DC motor control

This paper presents a control method that is effective to reduce the degenerative effects of delay time caused by a treacherous network. In present application a controlled DC motor is part of an inverted pendulum and provides the equilibrium of this system. The control of DC motor is accomplished at the distance through a treacherous network, which causes delay time in the control signal. A predictive technique is used so that it turns the system free of delay. A robust digital sliding mode controller is proposed to control the free-delay system. Due to the random conditions of the network operation, a delay time detection and accommodation strategy is also proposed. A computer simulation is shown to illustrate the design procedures and the effectiveness of the proposed method. © 2011 IEEE.

Simulation in NS-2 of DNP3 protocol encapsulated over TCP/IP in smart grid applications

In dealing with computer networks, these allow the flow of information through the resources of various equipment's. This work describes the implementation through the encapsulation of Protocol DNP3, usually employed in Smart Grid communication, in a simulator of discrete events. The NS-2 is a simulator in open source of network events, that facilitate the development of communication networks scenarios considering the protocols involved, in wireless or wired technologies. The objective of this work is to develop the DNP3 protocol encapsulation over a TCP/IP in the in the discrete event Simulator NS-2, allowing an analysis of behavior of a middle or large network sized in Smart Grid applications. © 2013 IEEE.

Equações discretas no ensino médio: modelos de dinâmicas populacionais

Pós-graduação em Matemática em Rede Nacional - IBILCE

Controle discreto com modos deslizantes em sistemas incertos com atraso no sinal de controle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelo de simulação computacional para balanceamento de linhas de produção das empresas cerâmicas de São Miguel do Guamá: um estudo de caso

O presente trabalho vem apresentar um modelo de simulação computacional com propósito de resolver o problema do balanceamento de linhas de produção de uma fábrica de cerâmica vermelha, pertencente ao polo oleiro-cerâmico de São Miguel do Guamá. Neste sentido, inicialmente é realizada uma pesquisa bibliográfica acerca dos sistemas de eventos discretos, dos métodos de solução para balanceamento de linhas e dos conceitos envolvendo a modelagem e simulação. A metodologia aborda o estudo de caso, sendo este conduzido pelo método proposto por Chwif (1999) no qual abrange 03 (três) macros etapas na condução de um projeto de simulação, sejam a etapa de concepção, implementação e etapa de análise. Com o modelo computacional desenvolvido com base nas características atuais da linha de produção, pode-se descrever o estado atual do processo, identificar a operação gargalo bem como encaminhar propostas de melhorias a partir da construção de 03 cenários. Onde o terceiro cenário apresentou os melhores resultados e, portanto, sendo este o modelo representativo ao balanceamento. Ao final, entende-se como principais contribuições deste trabalho o fato de trazer para dentro da universidade a experiência da aplicação prática da simulação, envolvendo uma indústria de cerâmica vermelha de São Miguel do Guamá e oferecer a indústria desta região uma ferramenta potencial para melhoria de seus processos produtivos.

A New Approach to Reducing Search Space and Increasing Efficiency in Simulation Optimization Problems via the Fuzzy-DEA-BCC

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Action crisis and cost–benefit thinking: A cognitive analysis of a goal-disengagement phase

The present research is based on the notion that disengagement from goals is not a discrete event but a process (Klinger, 1975). A critical phase in this process is when difficulties and setbacks in striving for a goal accumulate. This critical phase is termed here as an action crisis. Given the profound effects that people's thoughts have on their self-regulatory efficiency, it is essential to understand the cognitive correlates of an action crisis. In two experimental lab and two correlational field studies, the hypothesis that goal-related costs and benefits become cognitively highly accessible during an action crisis was tested and supported. Participants who were experiencing an action crisis in such diverse goal areas as intimate relationships, sports, and university studies, thought about goal-related costs and benefits more intensively and frequently in comparison to participants who were not in an action crisis. In an incidental learning task they recognized more of cost–benefit-items and less of implementation-items than the control group. Results are interpreted in terms of action phase specific mindsets (Gollwitzer, 1990, 2012).

The Struggle of Giving Up Personal Goals – Affective, Physiological, and Cognitive Consequences of an Action Crisis.

A critical phase in goal striving occurs when setbacks accumulate and goal disengagement becomes an issue. This critical phase is conceptualized as an action crisis and assumed to be characterized by an intrapsychic conflict in which the individual becomes torn between further goal pursuit and goal disengagement. Our theorizing converges with Klinger’s conceptualization of goal disengagement as a process, rather than a discrete event. Two longitudinal field studies tested and found support for the hypothesis that an action crisis not only compromises an individual’s psychological and physiological well-being, but also dampens the cognitive evaluation of the respective goal. In Study 3, marathon runners experiencing an action crisis in their goal of running marathons showed a stronger cortisol secretion and a lower performance in the race 2 weeks later. Results are interpreted in terms of action-phase–specific mindsets with a focus on self-regulatory processes in goal disengagement.

An OMNeT++ Framework to Evaluate Video Transmission in Mobile Wireless Multimedia Sensor Networks

The development and evaluation of new algorithms and protocols for Wireless Multimedia Sensor Networks (WMSNs) are usually supported by means of a discrete event network simulator, where OMNeT++ is one of the most important ones. However, experiments involving multimedia transmission, video flows with different characteristics, genres, group of pictures lengths, and coding techniques must be evaluated based also on Quality of Experience (QoE) metrics to reflect the user's perception. Such experiments require the evaluation of video-related information, i.e., frame type, received/lost, delay, jitter, decoding errors, as well as inter and intra-frame dependency of received/distorted videos. However, existing OMNeT++ frameworks for WMSNs do not support video transmissions with QoE-awareness, neither a large set of mobility traces to enable evaluations under different multimedia/mobile situations. In this paper, we propose a Mobile MultiMedia Wireless Sensor Network OMNeT++ framework (M3WSN) to support transmission, control and evaluation of real video sequences in mobile WMSNs.

Hybrid stochastic simulations of intracellular reaction-diffusion systems.

With the observation that stochasticity is important in biological systems, chemical kinetics have begun to receive wider interest. While the use of Monte Carlo discrete event simulations most accurately capture the variability of molecular species, they become computationally costly for complex reaction-diffusion systems with large populations of molecules. On the other hand, continuous time models are computationally efficient but they fail to capture any variability in the molecular species. In this study a hybrid stochastic approach is introduced for simulating reaction-diffusion systems. We developed an adaptive partitioning strategy in which processes with high frequency are simulated with deterministic rate-based equations, and those with low frequency using the exact stochastic algorithm of Gillespie. Therefore the stochastic behavior of cellular pathways is preserved while being able to apply it to large populations of molecules. We describe our method and demonstrate its accuracy and efficiency compared with the Gillespie algorithm for two different systems. First, a model of intracellular viral kinetics with two steady states and second, a compartmental model of the postsynaptic spine head for studying the dynamics of Ca+2 and NMDA receptors.

An adaptive Newton-method based on a dynamical systems approach

The traditional Newton method for solving nonlinear operator equations in Banach spaces is discussed within the context of the continuous Newton method. This setting makes it possible to interpret the Newton method as a discrete dynamical system and thereby to cast it in the framework of an adaptive step size control procedure. In so doing, our goal is to reduce the chaotic behavior of the original method without losing its quadratic convergence property close to the roots. The performance of the modified scheme is illustrated with various examples from algebraic and differential equations.

A simulation study of the standard design, the rolling six design, the CRM, and the modified CRM in Phase I clinical trials

The Phase I clinical trial is considered the "first in human" study in medical research to examine the toxicity of a new agent. It determines the maximum tolerable dose (MTD) of a new agent, i.e., the highest dose in which toxicity is still acceptable. Several phase I clinical trial designs have been proposed in the past 30 years. The well known standard method, so called the 3+3 design, is widely accepted by clinicians since it is the easiest to implement and it does not need a statistical calculation. Continual reassessment method (CRM), a design uses Bayesian method, has been rising in popularity in the last two decades. Several variants of the CRM design have also been suggested in numerous statistical literatures. Rolling six is a new method introduced in pediatric oncology in 2008, which claims to shorten the trial duration as compared to the 3+3 design. The goal of the present research was to simulate clinical trials and compare these phase I clinical trial designs. Patient population was created by discrete event simulation (DES) method. The characteristics of the patients were generated by several distributions with the parameters derived from a historical phase I clinical trial data review. Patients were then selected and enrolled in clinical trials, each of which uses the 3+3 design, the rolling six, or the CRM design. Five scenarios of dose-toxicity relationship were used to compare the performance of the phase I clinical trial designs. One thousand trials were simulated per phase I clinical trial design per dose-toxicity scenario. The results showed the rolling six design was not superior to the 3+3 design in terms of trial duration. The time to trial completion was comparable between the rolling six and the 3+3 design. However, they both shorten the duration as compared to the two CRM designs. Both CRMs were superior to the 3+3 design and the rolling six in accuracy of MTD estimation. The 3+3 design and rolling six tended to assign more patients to undesired lower dose levels. The toxicities were slightly greater in the CRMs.^

The Bazhanov-Stroganov model from 3D approach

We apply a three-dimensional approach to describe a new parametrization of the L-operators for the two-dimensional Bazhanov-Stroganov (BS) integrable spin model related to the chiral Potts model. This parametrization is based on the solution of the associated classical discrete integrable system. Using a three-dimensional vertex satisfying a modified tetrahedron equation, we construct an operator which generalizes the BS quantum intertwining matrix S. This operator describes the isospectral deformations of the integrable BS model.

Increasing the use of simulation in business

The nature of Discrete-Event Simulation (DES) and the use of DES in organisations is changing. Two important developments are the use of Visual Interactive Modelling systems and the use of DES in Business Process Management (BPM) projects. Survey research is presented that shows that despite these developments usage of DES remains relatively low due to a lack of knowledge of the benefits of the technique. This paper considers two factors that could lead to a greater achievement and appreciation of the full benefit of DES and thus lead to greater usage. Firstly in relation to using DES to investigate social systems, both in the process of undertaking a simulation project and in the interpretation of the findings a 'soft' approach may generate more knowledge from the DES intervention and thus increase its benefit to businesses. Secondly in order to assess the full range of outcomes of DES the technique could be considered from the perspective of an information processing tool within the organisation. This will allow outcomes to be considered under the three modes of organisational information use of sense making, knowledge creating and decision making which relate to the theoretical areas of knowledge management, organisational learning and decision making respectively. The association of DES with these popular techniques could further increase its usage in business.

Costing police custody operations

Presents a simulation study of the costing of police custody operations at a UK police force. The custody operation incorporates the arrest, booking-in, interview, detention and court appearance activities. The Activity Based Costing (ABC) approach is used as a framework to show how costs are generated by the three “drivers” of cost, activity and resource. These relate to the design efficiency of the process, the timing and mix of demand on the process and the cost of resources used to undertake the process respectively. The use of discrete-event simulation allows the incorporation of dynamic (time-dependent) and stochastic (variability) elements in the cost analysis. This enables both the amount and timing of the use of capacity and the generation of cost to be established. The concept of committed and flexible resources directs management decisions to the redeployment of unused capacity or alternatively the identification of additional capacity requirements.