Optimization of medium for the production of a novel aquaculture probiotic, Micrococcus MCCB 104 using central composite design

A marine isolate of jáÅêçÅçÅÅìë MCCB 104 has been identified as an aquaculture probiotic antagonistic to sáÄêáç. In the present study different carbon and nitrogen sources and growth factors in a mineral base medium were optimized for enhanced biomass production and antagonistic activity against the target pathogen, sáÄêáç=Ü~êîÉóá, following response surface methodology (RSM). Accordingly the minimum and maximum limits of the selected variables were determined and a set of fifty experiments programmed employing central composite design (CCD) of RSM for the final optimization. The response surface plots of biomass showed similar pattern with that of antagonistic activity, which indicated a strong correlation between the biomass and antagonism. The optimum concentration of the carbon sources, nitrogen sources, and growth factors for both biomass and antagonistic activity were glucose (17.4 g/L), lactose (17 g/L), sodium chloride (16.9 g/L), ammonium chloride (3.3 g/L), and mineral salts solution (18.3 mL/L). © KSBB

Extracellular β-glucosidase Production by a Marine Aspergillus sydowii BTMFS 55 under Solid State Fermentation Using Statistical Experimental Design

A potential fungal strain producing extracellular β-glucosidase enzyme was isolated from sea water and identified as ^ëéÉêJ Öáääìë=ëóÇçïáá BTMFS 55 by a molecular approach based on 28S rDNA sequence homology which showed 93% identity with already reported sequences of ^ëéÉêÖáääìë=ëóÇçïáá in the GenBank. A sequential optimization strategy was used to enhance the production of β-glucosidase under solid state fermentation (SSF) with wheat bran (WB) as the growth medium. The two-level Plackett-Burman (PB) design was implemented to screen medium components that influence β-glucosidase production and among the 11 variables, moisture content, inoculums, and peptone were identified as the most significant factors for β-glucosidase production. The enzyme was purified by (NH4)2SO4 precipitation followed by ion exchange chromatography on DEAE sepharose. The enzyme was a monomeric protein with a molecular weight of ~95 kDa as determined by SDS-PAGE. It was optimally active at pH 5.0 and 50°C. It showed high affinity towards éNPG and enzyme has a hã and sã~ñ of 0.67 mM and 83.3 U/mL, respectively. The enzyme was tolerant to glucose inhibition with a há of 17 mM. Low concentration of alcohols (10%), especially ethanol, could activate the enzyme. A considerable level of ethanol could produce from wheat bran and rice straw after 48 and 24 h, respectively, with the help of p~ÅÅÜ~êçãóÅÉë=ÅÉêÉîáëá~É in presence of cellulase and the purified β-glucosidase of ^ëéÉêÖáääìë=ëóÇçïáá BTMFS 55.

Experimental design on the simplex

Optimum experimental designs depend on the design criterion, the model and the design region. The talk will consider the design of experiments for regression models in which there is a single response with the explanatory variables lying in a simplex. One example is experiments on various compositions of glass such as those considered by Martin, Bursnall, and Stillman (2001). Because of the highly symmetric nature of the simplex, the class of models that are of interest, typically Scheff´e polynomials (Scheff´e 1958) are rather different from those of standard regression analysis. The optimum designs are also rather different, inheriting a high degree of symmetry from the models. In the talk I will hope to discuss a variety of modes for such experiments. Then I will discuss constrained mixture experiments, when not all the simplex is available for experimentation. Other important aspects include mixture experiments with extra non-mixture factors and the blocking of mixture experiments. Much of the material is in Chapter 16 of Atkinson, Donev, and Tobias (2007). If time and my research allows, I would hope to finish with a few comments on design when the responses, rather than the explanatory variables, lie in a simplex. References Atkinson, A. C., A. N. Donev, and R. D. Tobias (2007). Optimum Experimental Designs, with SAS. Oxford: Oxford University Press. Martin, R. J., M. C. Bursnall, and E. C. Stillman (2001). Further results on optimal and efficient designs for constrained mixture experiments. In A. C. Atkinson, B. Bogacka, and A. Zhigljavsky (Eds.), Optimal Design 2000, pp. 225–239. Dordrecht: Kluwer. Scheff´e, H. (1958). Experiments with mixtures. Journal of the Royal Statistical Society, Ser. B 20, 344–360. 1

Aplicación y desarrollo modelo de internacionalización : Jushi Design Limitada

El estudio de caso a desarrollar va a comprender la viabilidad de exportación de una empresa Colombiana llamada Jushi Design Limitada, la cual lleva 35 años en el mercado Colombiano con un gran reconocimiento en sus clientes y en el mercado mismo. Los casos de internacionalización de las empresa son hoy en día muy bien visto y de gran ejecución en las empresas colombianas debido al entorno en cual estamos viviendo, después de la apertura económica en el país las empresas se han puesto en la tarea de abrir sus mercados a otros países, como de igual manera importar productos de otros países, generando un comercio mucho más libre, sin fronteras u obstáculos. La globalización ha generado el intercambio de muchos productos ayudando al desarrollo de los países. Hoy en día el consumidor tiene la oportunidad de poder encontrar gran variedad de un solo producto en el mercado teniendo la posibilidad de elegir a sus necesidades la mejor opción. La ropa de moda femenina es un artículo en el cual las mujeres están muy al tanto de lo que sale y se comercializa sin olvidar las últimas tendencias y prendas que están a la moda. Es por esto que una empresa como Jushi Design Limitada con mucho tiempo en el mercado nacional está interesada en el desarrollo del plan exportador, así mismo el estar posesionado en las principales ciudades del país colombiano es de gran ayuda para el desarrollo de los objetivos planteados ya que se a preocupado por expandirse en el territorio nacional con sus prendas de últimas tendencias y gustos en las mujeres. No solo se realizara un estudio de viabilidad de exportación hacia la empresa Jushi Design Limitada si no también se buscara fortalezas y debilidades de la organización con el fin de poder contribuirle de alguna forma a la empresa sus problemas en los cuales frecuentan internamente y externamente. De esta forma entenderán cual es la salida a las diferentes debilidades que frecuentan dado el caso que las tengan. Es importante dar entender que por más que una empresa este en las mejores condiciones y posicionamiento en el mercado hay ciertas variables de las cuales toda empresa depende para el gran éxito y perdurabilidad en el tiempo, como lo son los aspectos políticos, sociales, económicos culturales entre otros. Todos estos son de gran fundamento para la consecución de los objetivos, buscar un país que cumpla con todas estas expectativas es muy importante para poder conseguir los objetivos planteados. Sin embargo nos basaremos en el aspecto comercial de Colombia frente al otro país ya que en este caso sería el primordial para encontrar el país indicado a realizar el estudio. Se realizara el diagnostico e investigación de mercados, con el fin de determinar tanto la situación de la empresa como la viabilidad en la que se encuentra, para la obtención del planteamiento del problema. Se buscara penetrar otros mercados con las diferentes colecciones que Jushi Design Limitada obtiene en el ano, de esta forma mostrara las últimas tendencias de la moda femeninas y sus diferentes y nuevos diseños en el mercado exterior. Las colecciones estarán fundamentas de acuerdo a la ocasión, clima y gusto de la persona, teniendo en cuenta aspectos como clima, moda, y ocasión en el cual este último está fundamentado mediante la época o momento en el cual está viviendo el cliente siendo en este caso la mujer.

Actitudes hacia la discapacidad : la influencia de variables individuales y contextuales

Este trabajo constituye una revisión de la influencia de las variables individuales y contextuales sobre las actitudes hacia la discapacidad. Para alcanzar este objetivo, se describió el concepto de discapacidad desde una perspectiva social, en donde se concibió la discapacidad como un aspecto relacional en vez de una característica individual. Por otra parte se describieron las actitudes hacia la discapacidad, los tipos y sus consecuencias, teniendo en cuenta las percepciones, creencias, emociones, información sobre discapacidad y variables sociodemográficas las cuales tienen un papel significativo en la formación y mantenimiento de las actitudes hacia la discapacidad. Adicionalmente se presentaron algunas de las estrategias de intervención que tiene como propósito mejorar las actitudes, aspecto que puede ayudar o contribuir a la aceptación de las personas con discapacidad. Finalmente, el presente trabajo muestra la necesidad de continuar el estudio de las actitudes hacia la discapacidad, y el mejorar las intervenciones basadas en los hallazgos presentados.

Modification of personality variables through application of a psycho-educational program of full consciousness (mindfulness) in university students

This study examines the effects in university students of a psycho-educational program in full awareness (mindfulness) on certain personality variables. A quasi-experimental (group comparison) design with pretest and postest measurements was employed in an experimental (n = 26) and a control group (n = 27). Barratt impulsiveness Scale (BiS- 11), Acceptance and Action Questionnaire (AAQ), Social Avoidance and Distress Scale (SAD), and the Profile of Mood States (POMS) were applied to experimental and control groups. The results show statistically significant changes in impulsivity variables, experiential avoidance, social avoidance, social anxiety, tension and fatigue when comparing the posttest mean scores of the groups.

Extensión de la especificación IMS Learning Design desde la adaptación e integración de unidades de aprendizaje. `Extension of the IMS Learnin Design specification based on adaptation and integration of units of learning´.

La tesis se centra en el aprendizaje personalizado y en la integración de Unidades de Aprendizaje. El objetivo fundamental es mejorar la expresividad pedagógica de IMS-LD, refinando estructuras de modelado y arquitectura existentes y desarrollando estructuras complementarias que permitan una formalización más precisa, versátil y sencilla de procesos de aprendizaje adaptativo y de mecanismos y procesos de integración con sistemas de aprendizaje y otras especificaciones. En esta tesis se estudia la especificación desde la base, analizando su modelo de información y cómo se construyen Unidades de Aprendizaje. Se analiza la estructura de la especificación, basándose en un estudio teórico y una investigación práctica fruto del modelado de Unidades de Aprendizaje reales y ejecutables que proporcionan una información útil de base. A partir de este estudio, se analiza la integración de Unidades de Aprendizaje con otros sistemas y especificaciones, abarcando desde la integración mínima mediante un enlace directo hasta compartir variables y estados que permiten una comunicación en tiempo real de ambas partes. La conclusión es que IMS-LD necesita una reestructuración y modificación de ciertos elementos, así como la incorporación de otros nuevos, para mejorar una expresividad pedagógica y una capacidad de integración con otros sistemas de aprendizaje y estándares eLearning, si se pretenden alcanzar: la personalización del proceso de aprendizaje y la interoperabilidad real. La implantación de la especificación se vería mejorada si existieran unas herramientas de más alto nivel, preferiblemente con planteamiento visual, que permitieran un modelado sencillo por parte de los usuarios finales reales de este tipo de especificaciones, como son los profesores, los creadores de contenido y los pedagogos-didactas que diseñan la experiencia de aprendizaje.

Contribució al coneixement de variables geoambientals en l'àmbit de la Costa Brava (Girona)

La tesi doctoral desenvolupada, emmarcada dins del camp de les Ciències Ambientals, aplica la Geologia Ambiental orientada al coneixement dels processos i recursos geològics de cara a la planificació i a l'ordenació del territori. Com a zona d'estudi s'ha seleccionat la Costa Brava meridional, concretament tota l'àrea litoral compresa per les conques hidrogràfiques de l'Aubi, riera de Calonge, Ridaura, riera de Tossa i riera de Lloret (75 km de línia de costa i una extensió de 291 km2). Aquest treball, amb l'aptitud integradora dels conceptes i mètodes propis de les Ciències Geològiques i Ambientals, s'ha proposat com a objectius globals l'anàlisi de la qualitat i del comportament físic i químic dels materials terrestres en front les accions humanes i de la seva utilització com a recursos; l'estudi dels processos naturals i de la influència que puguin tenir sobre l'home o bé els efectes que aquest pot causar sobre aquells, i per últim, com a derivació dels anteriors, el disseny i aplicació d'instruments de tipus preventiu en la gestió del territori; és a dir, la planificació dels usos del territori. Amb la filosofia de recerca basada en que els factor geològics són uns elements d'ajuda per a la visió integral d'un territori, s'han estudiat diferents variables geoambientals procurant traduir el coneixement del medi en informació apta per a la presa de decisions sobre l'ús i preservació d'aquest àmbit litoral. Els Sistemes d'Informació Geogràfica (SIG) han estat clau per a la visió sistèmica del territori, per a la integració de les diferents variables geoambientals, així com per a la producció cartogràfica temàtica i final. Pel que fa als processos geològics, lligats a la dinàmica fluviotorrencial, s'han cartografiat les principals àrees d'actuació així com analitzat els factors que inicien, afavoreixen o magnifiquen la seva ocurrència. S'han estudiat les accions denudatives, els processos de transport-sedimentació i amb l'estudi integrat d'aquests processos i formes resultants s'han identificat unitats territorials caracteritzades per un comportament geomòrfic uniforme. En quant a l'anàlisi dels recursos geològics s'ha aprofundit en el coneixement dels recursos hídrics subterranis, les roques industrials i els georecursos litorals. Pel que fa als primers s'ha centrat en la delimitació de les principals unitats i subunitats aqüíferes, així com en acotar les geometries i principals característiques hidràuliques. Pel que fa als àrids i roques de construcció l'objectiu fonamental ha estat la delimitació cartogràfica d'aquells materials que per les seves propietats fisicoquímiques són potencialment aptes per als usos indicats. Finalment s'ha fet una recerca orientada a l'estudi de factors que limiten o condicionen el potencial geoturístic d'aquesta àrea litoral, concretament en els penya-segats i les platges. Les principals aportacions d'aquesta tesi doctoral es poden emmarcar en l'àmbit regional i fenomenològic, aspectes clau en la gestió i planificació territorial. Pel que fa al primer, destaquem l'aportació de dades geoambientals a nivell cartogràfic en relació a variables litoestructurals, de processos dinàmics com de recursos geològics. Des del punt de vista de l'àmbit fenomenològic destaquem la interacció de les variables estudiades a nivell de conca hidrogràfica, com són, entre d'altres, les relacions existents entre les diferents formacions aqüíferes; la possible participació de les aigües subterrànies en la resposta hidrològica del sistema fluviotorrencial, o la problemàtica derivada de l'antropització de la sorra de la platja com a conseqüència d'abocaments de terres i residus inerts als marges de les rieres.

Estimating the spatial scales of regionalized variables by nested sampling, hierarchical analysis of variance and residual maximum likelihood

The variogram is essential for local estimation and mapping of any variable by kriging. The variogram itself must usually be estimated from sample data. The sampling density is a compromise between precision and cost, but it must be sufficiently dense to encompass the principal spatial sources of variance. A nested, multi-stage, sampling with separating distances increasing in geometric progression from stage to stage will do that. The data may then be analyzed by a hierarchical analysis of variance to estimate the components of variance for every stage, and hence lag. By accumulating the components starting from the shortest lag one obtains a rough variogram for modest effort. For balanced designs the analysis of variance is optimal; for unbalanced ones, however, these estimators are not necessarily the best, and the analysis by residual maximum likelihood (REML) will usually be preferable. The paper summarizes the underlying theory and illustrates its application with data from three surveys, one in which the design had four stages and was balanced and two implemented with unbalanced designs to economize when there were more stages. A Fortran program is available for the analysis of variance, and code for the REML analysis is listed in the paper. (c) 2005 Elsevier Ltd. All rights reserved.

Estimating the spatial scales of regionalized variables by nested sampling, hierarchical analysis of variance and residual maximum likelihood

The variogram is essential for local estimation and mapping of any variable by kriging. The variogram itself must usually be estimated from sample data. The sampling density is a compromise between precision and cost, but it must be sufficiently dense to encompass the principal spatial sources of variance. A nested, multi-stage, sampling with separating distances increasing in geometric progression from stage to stage will do that. The data may then be analyzed by a hierarchical analysis of variance to estimate the components of variance for every stage, and hence lag. By accumulating the components starting from the shortest lag one obtains a rough variogram for modest effort. For balanced designs the analysis of variance is optimal; for unbalanced ones, however, these estimators are not necessarily the best, and the analysis by residual maximum likelihood (REML) will usually be preferable. The paper summarizes the underlying theory and illustrates its application with data from three surveys, one in which the design had four stages and was balanced and two implemented with unbalanced designs to economize when there were more stages. A Fortran program is available for the analysis of variance, and code for the REML analysis is listed in the paper. (c) 2005 Elsevier Ltd. All rights reserved.

Closed loop design for a simple nonlinear aircraft model using eigenstructure assignment

Aircraft systems are highly nonlinear and time varying. High-performance aircraft at high angles of incidence experience undesired coupling of the lateral and longitudinal variables, resulting in departure from normal controlled flight. The aim of this work is to construct a robust closed-loop control that optimally extends the stable and decoupled flight envelope. For the study of these systems nonlinear analysis methods are needed. Previously, bifurcation techniques have been used mainly to analyze open-loop nonlinear aircraft models and investigate control effects on dynamic behavior. In this work linear feedback control designs calculated by eigenstructure assignment methods are investigated for a simple aircraft model at a fixed flight condition. Bifurcation analysis in conjunction with linear control design methods is shown to aid control law design for the nonlinear system.

Methodologies for the generation of design summer years for building energy simulation using UKCP09 probabilitic climate projections

Design summer years representing near-extreme hot summers have been used in the United Kingdom for the evaluation of thermal comfort and overheating risk. The years have been selected from measured weather data basically representative of an assumed stationary climate. Recent developments have made available ‘morphed’ equivalents of these years by shifting and stretching the measured variables using change factors produced by the UKCIP02 climate projections. The release of the latest, probabilistic, climate projections of UKCP09 together with the availability of a weather generator that can produce plausible daily or hourly sequences of weather variables has opened up the opportunity for generating new design summer years which can be used in risk-based decision-making. There are many possible methods for the production of design summer years from UKCP09 output: in this article, the original concept of the design summer year is largely retained, but a number of alternative methodologies for generating the years are explored. An alternative, more robust measure of warmth (weighted cooling degree hours) is also employed. It is demonstrated that the UKCP09 weather generator is capable of producing years for the baseline period, which are comparable with those in current use. Four methodologies for the generation of future years are described, and their output related to the future (deterministic) years that are currently available. It is concluded that, in general, years produced from the UKCP09 projections are warmer than those generated previously. Practical applications: The methodologies described in this article will facilitate designers who have access to the output of the UKCP09 weather generator (WG) to generate Design Summer Year hourly files tailored to their needs. The files produced will differ according to the methodology selected, in addition to location, emissions scenario and timeslice.

"Where am I?" Impact of display and content variables on spatial presence and comprehension in virtual environments

Forgetting immediate physical reality and having awareness of one�s location in the simulated world is critical to enjoyment and performance in virtual environments be it an interactive 3D game such as Quake or an online virtual 3d community space such as Second Life. Answer to the question "where am I?" at two levels, whether the locus is in the immediate real world as opposed to the virtual world and whether one is aware of the spatial co-ordinates of that locus, hold the key to any virtual 3D experience. While 3D environments, especially virtual environments and their impact on spatial comprehension has been studied in disciplines such as architecture, it is difficult to determine the relative contributions of specific attributes such as screen size or stereoscopy towards spatial comprehension since most of them treat the technology as monolith (box-centered). Using a variable-centered approach put forth by Nass and Mason (1990) which breaks down the technology into its component variables and their corresponding values as its theoretical basis, this paper looks at the contributions of five variables (Stereoscopy, screen size, field of view, level of realism and level of detail) common to most virtual environments on spatial comprehension and presence. The variable centered approach can be daunting as the increase in the number of variables can exponentially increase the number of conditions and resources required. We overcome this drawback posed by adoption of such a theoretical approach by the use of a fractional factorial design for the experiment. This study has completed the first wave of data collection and starting the next phase in January 2007 and expected to complete by February 2007. Theoretical and practical implications of the study are discussed.

The 'veil' of control: exploring the attitudes and perceptions of UK design controllers

In the UK, architectural design is regulated through a system of design control for the public interest, which aims to secure and promote ‘quality’ in the built environment. Design control is primarily implemented by locally employed planning professionals with political oversight, and independent design review panels, staffed predominantly by design professionals. Design control has a lengthy and complex history, with the concept of ‘design’ offering a range of challenges for a regulatory system of governance. A simultaneously creative and emotive discipline, architectural design is a difficult issue to regulate objectively or consistently, often leading to policy that is regarded highly discretionary and flexible. This makes regulatory outcomes difficult to predict, as approaches undertaken by the ‘agents of control’ can vary according to the individual. The role of the design controller is therefore central, tasked with the responsibility of interpreting design policy and guidance, appraising design quality and passing professional judgment. However, little is really known about what influences the way design controllers approach their task, providing a ‘veil’ over design control, shrouding the basis of their decisions. This research engaged directly with the attitudes and perceptions of design controllers in the UK, lifting this ‘veil’. Using in-depth interviews and Q-Methodology, the thesis explores this hidden element of control, revealing a number of key differences in how controllers approach and implement policy and guidance, conceptualise design quality, and rationalise their evaluations and judgments. The research develops a conceptual framework for agency in design control – this consists of six variables (Regulation; Discretion; Skills; Design Quality; Aesthetics; and Evaluation) and it is suggested that this could act as a ‘heuristic’ instrument for UK controllers, prompting more reflexivity in relation to evaluating their own position, approaches, and attitudes, leading to better practice and increased transparency of control decisions.

Genetic dissection of heterosis using epistatic association mapping in a partial NCII mating design

Heterosis refers to the phenomenon in which an F1 hybrid exhibits enhanced growth or agronomic performance. However, previous theoretical studies on heterosis have been based on bi-parental segregating populations instead of F1 hybrids. To understand the genetic basis of heterosis, here we used a subset of F1 hybrids, named a partial North Carolina II design, to perform association mapping for dependent variables: original trait value, general combining ability (GCA), specific combining ability (SCA) and mid-parental heterosis (MPH). Our models jointly fitted all the additive, dominance and epistatic effects. The analyses resulted in several important findings: 1) Main components are additive and additive-by-additive effects for GCA and dominance-related effects for SCA and MPH, and additive-by-dominant effect for MPH was partly identified as additive effect; 2) the ranking of factors affecting heterosis was dominance > dominance-by-dominance > over-dominance > complete dominance; and 3) increasing the proportion of F1 hybrids in the population could significantly increase the power to detect dominance-related effects, and slightly reduce the power to detect additive and additive-by-additive effects. Analyses of cotton and rapeseed datasets showed that more additive-by-additive QTL were detected from GCA than from trait phenotype, and fewer QTL were from MPH than from other dependent variables.