961 resultados para Density measurement (specific gravity)
Resumo:
Methanolic transesterification of oils and fats was carried out in a two steps procedure, under basic and acidic catalysis. Palm, soybean, canola, corn, rice, grapeseed, sunflower, peanut, pequi and olive oils, besides tallow and lard were used as feedstock. Specific gravity, relative viscosity, thin layer chromatography and gas chromatography were used to characterize the biodiesel. Biodiesel was obtained in high yield and purity. Results were used to discuss the following key-concepts: 1 - triglycerides, composition and properties; 2 - nucleophilic acyl substitution under basic and acid conditions, 3 - thin layer chromatography, 4 - gas chromatography and its quantitative methods.
Resumo:
Maranhão state in Brazil presents a big potential for the cultivation of several oleaginous species, such as babassu, soybean, castor oil plant, etc... These vegetable oils can be transformed into biodiesel by the transesterification reaction in an alkaline medium, using methanol or ethanol. The biodiesel production from a blend of these alcohols is a way of adding the technical and economical advantages of methanol to the environmental advantages of ethanol. The optimized alcohol blend was observed to be a methanol/ethanol volume ratio of 80 % MeOH: 20 % EtOH. The ester content was of 98.70 %, a value higher than the target of the ANP, 96.5 % (m/m), and the biodiesel mass yield was of 95.32 %. This biodiesel fulfills the specifications of moisture, specific gravity, kinematic viscosity and percentages of free alcohols (methanol plus ethanol) and free glycerin.
Resumo:
Hydration is recommended in order to decrease the overload on the cardiovascular system when healthy individuals exercise, mainly in the heat. To date, no criteria have been established for hydration for hypertensive (HY) individuals during exercise in a hot environment. Eight male HY volunteers without another medical problem and 8 normal (NO) subjects (46 ± 3 and 48 ± 1 years; 78.8 ± 2.5 and 79.5 ± 2.8 kg; 171 ± 2 and 167 ± 1 cm; body mass index = 26.8 ± 0.7 and 28.5 ± 0.6 kg/m²; resting systolic (SBP) = 142.5 and 112.5 mmHg and diastolic blood pressure (DBP) = 97.5 and 78.1 mmHg, respectively) exercised for 60 min on a cycle ergometer (40% of VO2peak) with (500 ml 2 h before and 115 ml every 15 min throughout exercise) or without water ingestion, in a hot humid environment (30ºC and 85% humidity). Rectal (Tre) and skin (Tsk) temperatures, heart rate (HR), SBP, DBP, double product (DP), urinary volume (Vu), urine specific gravity (Gu), plasma osmolality (Posm), sweat rate (S R), and hydration level were measured. Data were analyzed using ANOVA in a split plot design, followed by the Newman-Keuls test. There were no differences in Vu, Posm, Gu and S R responses between HY and NO during heat exercise with or without water ingestion but there was a gradual increase in HR (59 and 51%), SBP (18 and 28%), DP (80 and 95%), Tre (1.4 and 1.3%), and Tsk (6 and 3%) in HY and NO, respectively. HY had higher HR (10%), SBP (21%), DBP (20%), DP (34%), and Tsk (1%) than NO during both experimental situations. The exercise-related differences in SBP, DP and Tsk between HY and NO were increased by water ingestion (P < 0.05). The results showed that cardiac work and Tsk during exercise were higher in HY than in NO and the difference between the two groups increased even further with water ingestion. It was concluded that hydration protocol recommended for NO during exercise could induce an abnormal cardiac and thermoregulatory responses for HY individuals without drug therapy.
Resumo:
The objective of this study was to assess the effect of the addition of cashew nuts meal (0, 5, 10, 15, 20, and 25%) to laying hen diets on egg quality and yolk composition. The variables studied were: egg weight, specific gravity, Haugh Units, percentages of shell, albumen, and yolk, moisture, total solids, total lipids, fatty acids profile, and yolk cholesterol. The addition of up to 25% of cashew nuts meal to hen diets did not affect egg quality and freshness, moisture and total solids content. However, an increase in total lipid content and a decrease in yolk pigmentation was observed. Oleic acid level increased in the yolk, whereas palmitic, stearic, and linoleic acid levels decreased. The addition of cashew nuts meal increased the monounsaturated/saturated fatty acid ratio in the yolk and reduced the cholesterol content. Therefore, the use of cashew nuts meal in laying hen diets favorably modifies the fatty acid composition of egg yolk and contributes to a better acceptance of this food by consumers since it also reduces yolk cholesterol levels.
Resumo:
Les objectifs de cette étude étaient (1) de décrire la localisation et la sévérité des lésions d’ostéoarthrose (OA) chroniques acquises naturellement au niveau du grasset équin grâce à l’échographie (US), la radiographie (XR), la tomodensitométrie (CT) et l’évaluation macroscopique (ME), (2) de comparer la performance diagnostique de chacune des modalities d’imagerie avec ME et (3) d’évaluer quantitativement la densité osseuse sous-chondrale lors d’OA du grasset chez le cheval à la tomodensitométrie. Des évaluations post mortem radiographique, tomodensitométrique et échographique ont été réalisées sur 23 grassets cadavériques et comparées à l’évaluation macroscopique. Des associations significatives ont été notées entre le «osteophytes global score» de toutes les modalités (US, p=0.04; XR, p=0.005; CT, p˂0.0001) et ME. De plus, la tomodensitométrie a démontré la plus forte association. Les ostéophytes étaient principalement localisés au niveau de l’articulation fémorotibiale médiale et cette articulation présentait également les scores d’ostéophytes les plus sévères. Un patron spécifique d’ostéophytes associé à l’insertion de la capsule articulaire sur le condyle fémoral médial a été mis en évidence. La nouvelle projection radiographique (Ca10Pr5L-CrDiMO) a été utile dans la détection des ostéophytes de la région intercondylaire. Les grades d’ostéophytes (0-3) ne différaient pas significativement selon la modalité dans la majorité des sites. La faible sensibilité/spécificité a indiqué que la sclérose de l’os sous-chondral et l’applatissement des condyles fémoraux ne semblent pas être des indicateurs fiables d’OA du grasset équin. L’OA du grasset équin est associée à une réduction de la densité osseuse sous-chondrale et des sites spécifiques de résorption/kystes sous-chondraux ont été notés chez certains spécimens.
Resumo:
The present investigation is dedicated to understanding various mechanisms of salinity tolerance in the estuarine clam V. cyprinoides var. cochinensis. Even though V. cyprinoids var. cochinensis and V. cyprinoides are found to coexist in the same area, V. cyprinoids is reported to tolerate higher salinities than variety cochinenesis. Variations in the salinity of sea water may affect the aquatic organisms through specific gravity control and variations in osmotic pressure. The specific gravity of most soft tissues is close to that of normal seawater. Many bottom living forms, both attached and motile, have very high specific gravities eg.villorita cyprinoids. Villorita spp. Occurs abundantly in the reaches of the estuary and backwaters of Kerala. In both marine and estuarine forms, it is observed that mantle employs a lesser quantity of amino acids compared to adductor and foot. The regulation of cell volume is not carried out equally in all types of tissues. The capability of salinity tolerance is an aggregate of both the capabilities of extra cellular anisosmotic and intracellular isosmotic regulations in osmoconforming animals. The ultimate aim of water regulation is to regulate the cell volume.T here are slight changes occur in cell volume even in osmoregulators. These studies can also help in revealing the changes brought about in the cellular organelles like lysosomes, which were found to have a role in the osmoregulatory process. The osmoregulatory machinery of estuarine animals is more streamlined for a successful life in the estuarine regime.
Resumo:
Objective: The objective of this study was to investigate associations between sugar intake and overweight using dietary biomarkers in the Norfolk cohort of the European Prospective Investigation into Cancer and Nutrition (EPIC-Norfolk). Design: Prospective cohort study Setting: European Prospective Investigation into Cancer in Norfolk (EPIC-Norfolk) in the UK, recruitment between 1993 and 1997. Subjects: 1734 participants (39 – 77 years). Sucrose intake was assessed using 7-day diaries. Baseline spot urine samples were analysed for sucrose by GC-MS. Sucrose concentration adjusted by specific gravity was used as biomarker for intake. Regression analyses were used to investigate associations between sucrose intake and risk of BMI > 25 kg/m2 after three years of follow-up. Results: After three years of follow-up, mean BMI was 26.8 kg/m2. Self-reported sucrose intake was significantly positively associated with biomarker. Associations between biomarker and BMI were positive (β=0.25; 95% CI: 0.08; 0.43), while they were inverse when using self-reported dietary data (β=-1.40; 95% CI: -1.81; -0.99). Age- and sex-adjusted OR for BMI > 25 kg/m2 in participants in the fifth vs. first quintile was 1.54 (95% CI: 1.12; 2.12; pTrend=0.003,) when using biomarker and 0.56 (95% CI: 0.40; 0.77; pTrend<0.001) with self-reported dietary data. Conclusions: Our results suggest that sucrose measured by objective biomarker but not self-reported sucrose intake is positively associated with body mass index. Future studies should consider use of objective biomarkers of sucrose intake.
Resumo:
Este trabalho é camposto por dois estudos basicamente: um estudo teórico sobre os blocos sílico-calcários de areia-cal e um estudo prático sobre a viabilidade técnica de produção destes blocos em uma região determinada. A pesquisa teórica procurou elucidar o que vem a ser um bloco síilico-calcário, buscando a viabilidade da pesquisa prática e os pontos principais a serem abordados. Foram estudados, nesta parte, as matérias-primas e o processo produtivo empregado na confecção destes elementos, mostrando a importância de cada item para as características do produto final. Foi dada atenção ainda às características técnicas, aos fatores que determinam a produção e emprego e aos aspectos positivos e negativos dos elementos deste tipo produzido em outros locais. A pesquisa prática buscou a disponibilidade de matéria-prima conveniente para a produção de blocos sílicos-calcários, e o efeito das variações do processo produtivo sobre os produtos confeccionados com os materiais estudados. A matéria-prima empregada foi uma areia quartzosa da região de Santa Maria-RS, cal calcítica virgem de São Sepé-RS, e cinza volante da termoelétrica Presidente Médici, em Bagé-RS, fazendo-se variações nas percentagens destes componentes. As variações do processo produtivo foram efetuadas no tipo de moldagem dos corpos de prova, em que foi usada pressão, vibração e vibro-compressão, e na pressão de autoclavagem. Para todas as variações efetuadas foram obtidas as seguintes características: variações por autoclavagem, massa específica aparente, absorção d´água, resistência à compressão, resistência à tração e módulo de elasticidade à compressão, as quais foram relacionadas através de quadros e figuras às diversas variações.
Resumo:
Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions
Resumo:
The development of activities the of oil and gas sector have promoted the search for suitable materials for cementing oil wells. In the state of the Rio Grande do Norte, the integrity of the cement sheath tends to be impaired during steam injection, a procedure necessary to increase oil recovery in reservoirs with low-viscosity oil. The geopolymer is a material that can be used as alternative cement, since it has been used in the production of fire-resistant components, building structures, and for the control of toxic or radioactive residues. Geopolymers result from condensation polymer alkali aluminosilicates and silicates resulting three-dimensional polymeric structures. They are produced in a manner different from that of Portland cement, which is made an activating solution that is mixed with geopolymer precursor. Among the few works studied allowed us to conclude that the pastes prepared with metakaolin as precursor showed better performance of its properties. Several studies show the addition of waste clay as a means of reducing cost and improving end of the folder properties. On this basis, the goal is to study the influence of the addition of ceramic waste in geopolymer paste. To develop the study of rheology tests were carried out, filtered, thickening time, compressive strength, free water, specific gravity and permeability, according to the American Pretoleum Institute (API). The results for all formulations studied show that the folders have high mechanical strength to a light paste; low filtrate volume, absence of free water, very low permeability, slurry, consistent with a light paste, and thickening time low that can be corrected with the use of a retardant handle. For morphological characterization, microstructural, physical, chemical and thermal tests were carried out by XRD, MEV, DTA, TG, FTIR. In the trial of XRD, it was found that geopolymer is an amorphous material, with a peak of crystalline kaolinite. In tests of TG / DTA, revealed the presence of a significant event, which represents the mass loss related to water, and also observed the reduction of weight loss by increasing the concentration of ceramic waste. In the trial of MEV, we found a uniform matrix without the presence of other phases. In the trial of FT-IR, we observed the presence of the band related to water. From all results it was determined that the optimum concentration range of use is between 2.5 and 5% of waste ceramic
Resumo:
Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures
Resumo:
This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Dois eqüinos da raça Brasileira de Hipismo, machos, quatro anos de idade, apresentando sinais de poliúria-polidipsia, foram submetidos a completa avaliação clínica e a exames de sangue e urina. Não foram observadas alterações clínicas, hematológicas ou bioquímicas, a não ser um decréscimo na gravidade específica da urina de ambos os animais (1,009 e 1,008). Realizou-se um teste de privação de água de 24 horas e durante esse período a gravidade especifica da urina subiu gradualmente até atingir a normalidade (1,028 e 1,026, respectivamente). O comportamento anormal ocorreu por confinamento excessivo. Os resultados clínicos e de laboratório e o teste de privação de água indicam o diagnóstico de polidipsia psicogênica.