Highly resolved observations of trace gases in the lowermost stratosphere and upper troposphere from the SPURT project: an overview

During SPURT (Spurenstofftransport in der Tropopausenregion, trace gas transport in the tropopause region) we performed measurements of a wide range of trace gases with different lifetimes and sink/source characteristics in the northern hemispheric upper troposphere (UT) and lowermost stratosphere (LMS). A large number of in-situ instruments were deployed on board a Learjet 35A, flying at altitudes up to 13.7 km, at times reaching to nearly 380 K potential temperature. Eight measurement campaigns (consisting of a total of 36 flights), distributed over all seasons and typically covering latitudes between 35° N and 75° N in the European longitude sector (10° W–20° E), were performed. Here we present an overview of the project, describing the instrumentation, the encountered meteorological situations during the campaigns and the data set available from SPURT. Measurements were obtained for N2O, CH4, CO, CO2, CFC12, H2, SF6, NO, NOy, O3 and H2O. We illustrate the strength of this new data set by showing mean distributions of the mixing ratios of selected trace gases, using a potential temperature-equivalent latitude coordinate system. The observations reveal that the LMS is most stratospheric in character during spring, with the highest mixing ratios of O3 and NOy and the lowest mixing ratios of N2O and SF6. The lowest mixing ratios of NOy and O3 are observed during autumn, together with the highest mixing ratios of N2O and SF6 indicating a strong tropospheric influence. For H2O, however, the maximum concentrations in the LMS are found during summer, suggesting unique (temperature- and convection-controlled) conditions for this molecule during transport across the tropopause. The SPURT data set is presently the most accurate and complete data set for many trace species in the LMS, and its main value is the simultaneous measurement of a suite of trace gases having different lifetimes and physical-chemical histories. It is thus very well suited for studies of atmospheric transport, for model validation, and for investigations of seasonal changes in the UT/LMS, as demonstrated in accompanying and elsewhere published studies.

A refined sampling strategy for intra-tooth stable isotope analysis of mammalian enamel

Serial sampling and stable isotope analysis performed along the growth axis of vertebrate tooth enamel records differences attributed to seasonal variation in diet, climate or animal movement. Because several months are required to obtain mature enamel in large mammals, modifications in the isotopic composition of environmental parameters are not instantaneously recorded, and stable isotope analysis of tooth enamel returns a time-averaged signal attenuated in its amplitude relative to the input signal. For convenience, stable isotope profiles are usually determined on the side of the tooth where enamel is thickest. Here we investigate the possibility of improving the time resolution by targeting the side of the tooth where enamel is thinnest. Observation of developing third molars (M3) in sheep shows that the tooth growth rate is not constant but decreases exponentially, while the angle between the first layer of enamel deposited and the enamel–dentine junction increases as a tooth approaches its maximal length. We also noted differences in thickness and geometry of enamel growth between the mesial side (i.e., the side facing the M2) and the buccal side (i.e., the side facing the cheek) of the M3. Carbon and oxygen isotope variations were measured along the M3 teeth from eight sheep raised under controlled conditions. Intra-tooth variability was systematically larger along the mesial side and the difference in amplitude between the two sides was proportional to the time of exposure to the input signal. Although attenuated, the mesial side records variations in the environmental signal more faithfully than the buccal side. This approach can be adapted to other mammals whose teeth show lateral variation in enamel thickness and could potentially be used as an internal check for diagenesis.

Modelling the rheology of sea ice as a collection of diamond-shaped floes

In polar oceans, seawater freezes to form a layer of sea ice of several metres thickness that can cover up to 8% of the Earth’s surface. The modelled sea ice cover state is described by thickness and orientational distribution of interlocking, anisotropic diamond-shaped ice floes delineated by slip lines, as supported by observation. The purpose of this study is to develop a set of equations describing the mean-field sea ice stresses that result from interactions between the ice floes and the evolution of the ice floe orientation, which are simple enough to be incorporated into a climate model. The sea ice stress caused by a deformation of the ice cover is determined by employing an existing kinematic model of ice floe motion, which enables us to calculate the forces acting on the ice floes due to crushing into and sliding past each other, and then by averaging over all possible floe orientations. We describe the orientational floe distribution with a structure tensor and propose an evolution equation for this tensor that accounts for rigid body rotation of the floes, their apparent re-orientation due to new slip line formation, and change of shape of the floes due to freezing and melting. The form of the evolution equation proposed is motivated by laboratory observations of sea ice failure under controlled conditions. Finally, we present simulations of the evolution of sea ice stress and floe orientation for several imposed flow types. Although evidence to test the simulations against is lacking, the simulations seem physically reasonable.

Development and Evaluation of a Novel pH Indicator Biodegradable Film Based on Cassava Starch

A pH indicator film based on cassava starch plasticized with sucrose and inverted sugar and incorporated with grape and spinach extracts as pH indicator sources (anthocyanin and chlorophyll) has been developed, and its packaging properties have been assessed. A second-order central composite design (2(2)) with three central points and four star points was used to evaluate the mechanical properties (tensile strength, tensile strength at break, and elongation at break percentage), moisture barrier, and microstructure of the films, and its potential as a pH indicator packaging. The films were prepared by the casting technique and conditioned under controlled conditions (75% relative humidity and 23 degrees C), at least 4 days before the analyses. The materials were exposed to different pH solutions (0, 2, 7, 10, and 14) and their color parameters (L*, a*, b*, and haze) were measured by transmittance. Grape and spinach extracts have affected the material characterization. Film properties (mechanical properties and moisture barrier) were strongly influenced by extract concentration presenting lower results than for the control. Films containing a higher concentration of grape extract presented a greater color change at different pH`s suggesting that anthocyanins are more effective as pH indicators than chlorophyll or the mixture of both extracts. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 1069-1079,2011

Comparing performance of instrumental drift correction by linear and quadratic adjusting in inductive electromagnetic data

Electromagnetic induction (EMI) method results are shown for vertical magnetic dipole (VMD) configuration by using the EM38 equipment. Performance in the location of metallic pipes and electrical cables is compared as a function of instrumental drift correction by linear and quadratic adjusting under controlled conditions. Metallic pipes and electrical cables are buried at the IAG/USP shallow geophysical test site in Sao Paulo City. Brazil. Results show that apparent electrical conductivity and magnetic susceptibility data were affected by ambient temperature variation. In order to obtain better contrast between background and metallic targets it was necessary to correct the drift. This correction was accomplished by using linear and quadratic relation between conductivity/susceptibility and temperature intending comparative studies. The correction of temperature drift by using a quadratic relation was effective, showing that all metallic targets were located as well deeper targets were also improved. (C) 2010 Elsevier B.V. All rights reserved.

Use of PCR for detecting Aspergillus flavus in maize treated by gamma radiation process

The aim of this study was to verify the effects of gamma radiation process on the fungal DNA and the application of PCR in the detection of Aspergillus flavus in irradiated maize grains. The samples were inoculated with a toxigenic strain and incubated under controlled conditions of relative humidity, water activity, and temperature for 15 days. After incubation, the samples were treated with gamma radiation with doses of 5 and 10 kGy and individually analyzed. The use of PCR technique showed the presence of DNA bands of Aspergillus flavus in all irradiated samples that showed no fungal growth in agar medium.

Divergence Involving Global Regulatory Gene Mutations in an Escherichia coli Population Evolving under Phosphate Limitation

Many of the important changes in evolution are regulatory in nature. Sequenced bacterial genomes point to flexibility in regulatory circuits but we do not know how regulation is remodeled in evolving bacteria. Here, we study the regulatory changes that emerge in populations evolving under controlled conditions during experimental evolution of Escherichia coli in a phosphate-limited chemostat culture. Genomes were sequenced from five clones with different combinations of phenotypic properties that coexisted in a population after 37 days. Each of the distinct isolates contained a different mutation in 1 of 3 highly pleiotropic regulatory genes (hfq, spoT, or rpoS). The mutations resulted in dissimilar proteomic changes, consistent with the documented effects of hfq, spoT, and rpoS mutations. The different mutations do share a common benefit, however, in that the mutations each redirect cellular resources away from stress responses that are redundant in a constant selection environment. The hfq mutation lowers several individual stress responses as well the small RNA-dependent activation of rpoS translation and hence general stress resistance. The spoT mutation reduces ppGpp levels, decreasing the stringent response as well as rpoS expression. The mutations in and upstream of rpoS resulted in partial or complete loss of general stress resistance. Our observations suggest that the degeneracy at the core of bacterial stress regulation provides alternative solutions to a common evolutionary challenge. These results can explain phenotypic divergence in a constant environment and also how evolutionary jumps and adaptive radiations involve altered gene regulation.

En beskrivning av informationsmiljö därdatumstyrda förhållanden råder : En fallstudie av en myndighet och dess informationsmiljö med rättsakter

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge. The study describes an information environment in an organization in which date-controlled conditions apply and challenges with such an environment.The study also provides a proposal for designing an IT-solution for such an environment. The result that emerged showed that the information environment in terms of the legal documents and the institutions’ (EU and UNECE) websites where they are distributed is challenging for keeping track on dates. The challenges of the websites are that they are limited and complicated in terms of information search. The challenges with the legal documents are that date-controlled conditions apply. In other words, the dates themselves determine which dates and what applies and not. The legal documents are also many, retroactive, refer to each other and contain regulations for different kinds of areas, which makes difficult to find the relevant dates. The design proposal that emerged was made based on the existing IT environment at the Transport Agency. It was proposed that important key concepts are identified, categorized and realized in a database with searchability on the most important common concepts as denominators, and that it the information conforms with E-message. The developed database was based on date, date type, vehicle category, legal document, minor version and other info. A web interface was created in ASP.NET and C # for access to the database, with the message that a webbbased IT-solution should be considered.

Efeitos de variáveis abióticas na composição química de Gelidium Crinale (Gelidiaceae, Rhodophyta) em cultivo unialgal

Os efeitos individuais e interativos dos parâmetros ambientais físicos e químicos, como temperatura, intensidade luminosa, salinidade e concentração de fósforo inorgânico dissolvido na água do mar, na produção de proteínas, carboidratos, acúmulo de fósforo tecidual e taxa de absorção do fósforo inorgânico disponível no meio de cultura em Gelidium crinale (Turner) Lamouroux, foram investigados durante um período de sete dias de cultivo laboratorial, em condições controladas. A ação dos parâmetros abióticos foi analisada de três maneiras diferentes. A primeira avaliação integrou a ação de temperatura, intensidade luminosa e fósforo inorgânico dissolvido, mantendo-se fixa a salinidade em 25 ups, onde se constatou que em todos os componentes químicos algais ocorreram interações de terceira ordem. O incremento de 2,28 a 2,67 % nos teores de proteínas foram obtidos à temperatura de 25 °C e 12 μmol m-2 s-1 de intensidade luminosa, diminuindo com a elevação da intensidade luminosa para 40 μmol m-2 s-1. Para carboidratos, ocorreram interações significativas entre os três parâmetros, com um aumento de 6,85 % sendo registrado a 25 °C de temperatura, 24 μmol m-2 s-1 de intensidade luminosa e 10,0 μM de fósforo inorgânico. O aumento máximo na taxa de fósforo tecidual (0,56 %) ocorreu em talos cultivados nas menores temperatura e intensidade luminosa e na maior concentração de fósforo inorgânico dissolvido. Com relação à intensidade luminosa, foi observada uma correlação negativa entre proteínas e carboidratos. A segunda avaliação estabeleceu a ação independente e sinérgica de temperatura, salinidade e fósforo inorgânico disponível no meio de cultivo, fixando-se a intensidade luminosa em 24 μmol m-2s-1. A maior produção de proteínas ocorreu em cultivos onde a temperatura foi de 25 °C, com uma concentração de 5,0 e 10,0 μM de fósforo inorgânico dissolvido e salinidade entre 15 e 20 ups, cujos valores médios do incremento variaram entre 2,62 a 2,83 % peso seco de alga, resultando em uma interação de terceira ordem altamente significativa. Para carboidratos a elevação de 6,85 % em sua concentração está associada à maior temperatura (25 °C), maior salinidade (25 ups) e maior quantidade de fósforo inorgânico disponível no meio de cultivo (10,0 μM). Contudo, não foi observada uma interação de terceira ordem através da análise estatística. Para esta biomolécula observaram-se interações de segunda ordem altamente significativa (P < 0,005) entre temperatura e diferentes concentrações de fósforo inorgânico e entre temperatura e salinidade (P < 0,000). O acúmulo de fósforo nos talos da alga foi menor durante os cultivos em que a salinidade foi de 25 ups,nas temperaturas de 20 e 25 °C e concentração de fósforo disponível de 2,5 μM, com percentuais entre 0,08 a 0,11 % em peso de cinzas. O maior incremento ocorreu na menor temperatura, associada à baixa salinidade e alta concentração de fósforo inorgânico no meio. O coeficiente de correlação de Pearson revelou correlações positivas, altamente significativas (P < 0,001) entre teor de proteína, temperatura e disponibilidade de fósforo inorgânico no meio de cultivo. Para carboidratos, as correlações foram positivas com os três parâmetros abióticos. Para fósforo tecidual somente com o fósforo inorgânico disponível no cultivo foi que ocorreu uma relação positiva; com os outros dois parâmetros esta correlação foi negativa. Entre os componentes químicos encontrados nas algas, proteínas e carboidratos apresentaram uma relação positiva, porém fósforo tecidual apresentou uma correlação negativa com ambos, embora com proteínas esta relação não tenha sido significativa. A terceira avaliação estudou a ação individual e o sinergismo entre os parâmetros ambientais, temperatura, intensidade luminosa e salinidade, a uma concentração fixa de fósforo inorgânico disponível no meio de cultivo (10,0 μM), sobre a composição química, bem como na taxa de absorção de fósforo inorgânico disponível. Observou-se a ocorrência de interações de terceira ordem em todos as variáveis estudadas. O teor de proteínas apresentou um aumento de 3,72 % durante o período de cultivo, passando de 20,63 % antes do cultivo, para 24,35 % após o término do experimento, principalmente nas condições de 25 °C de temperatura, 12 μmol m-2s-1 de intensidade luminosa e 15 ups de salinidade. Para carboidratos, nas condições de baixa intensidade luminosa (12 μmol m-2s- 1), a uma temperatura de 20 °C e salinidades de 10 e 15 ups, foram registrados valores inferiores à amostra controle, caracterizando um consumo desta biomolécula por parte das algas. Nestas mesmas condições ambientais, foram registrados os maiores teores de fósforo tecidual, variando entre 0,86 a 1,09 % do peso das cinzas. As maiores taxas de absorção do fósforo do meio ocorreram na salinidade de 25 ups e 25 °C de temperatura, diminuindo da intensidade luminosa de 12 μmol m-2s-1 para 40 μmol m-2s-1. As maiores concentrações de fósforo inorgânico residual na água do meio de cultivo ocorreram nas salinidades de 10 e 15 ups, em todas as intensidade luminosas e temperaturas estudadas. Através do coeficiente de correlação de Pearson, observou-se que os teores de proteínas apresentaram uma forte correlação negativa com a intensidade luminosa e positiva com a temperatura e salinidade, embora com esta última não tenha sido significativa. Para carboidratos, as correlações com os parâmetros abióticos foram todas positivas. Correlações negativa e positiva, não significativas, foram observadas entre esta biomolécula e o teor de proteínas e a taxa de absorção de fósforo disponível no meio, respectivamente. Por outro lado, com fósforo tecidual, ocorreu uma correlação negativa, altamente significativa. Este estudo mostra o estado fisiológico de Gelidium crinale e contribui para o estabelecimento das melhores condições de cultivo para produção de proteína, carboidrato e fósforo tecidual e indicação do uso racional de nutrientes, fornecendo informações para a otimização de processos de maricultura, tanto em termos de cultivo bem sucedido de algas, quanto de redução no impacto sobre o ambiente.

Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Avaliação de parâmetros de estresse oxidativo em plantas de cana-de-açúcar tratadas com peróxico de hidrogênio

The genus Saccharum belongs to Poaceae family. Sugarcane has become important monocultures in Brazil due to their products: ethanol and sugar. The production may change between different regions from Brazil. This difference is related to soil, climatic conditions and temperature that promotes oxidative stress that may induce an early flowering. The aim of this work was to identify the effects of oxidative stress. In order to analyse this, sugarcane plants were submitted to oxidative stress using hydrogen peroxide. After this treatment, the oxidative stress were analyzed Then, the plant responses were analyzed under different approaches, using morphophysiological, biochemical and molecular tools. Thus, sugarcane plants were grown under controlled conditions and until two months they were subjected first to a hydroponics condition for 24 hours in order to acclimation. After this period, these plants were submitted to oxidative stresse using 0 mM, 10 mM, 20 mM and 30 mM hydrogen peroxide during 8 hours. The histomorphometric analysis allowed us to verify that both root and leaf tissues had a structural changes as it was observed by the increased in cell volume, lignin accumulation in cell walls. Besides, this observation suggested that there was a change in redox balance. Also, it was analyzed the activity of the SOD, CAT and APX enzymes. It was observed an increase in the SOD activity in roots and it was also observed a lipid peroxidation in leaves and roots. Then, in order to identify proteins that were differently expressed in this conditions it was used the proteomic tool either by bidimensional gel or by direct sequencing using the Q-TOF EZI. The results obtained with this approach identified more than 3.000 proteins with the score ranging from 100-5000 ions. Some of the proteins identified were: light Harvesting; oxygenevolving; Thioredoxin; Ftsh-like protein Pftf precusor; Luminal-binding protein; 2 cys peroxiredoxin e Lipoxygenase. All these proteins are involved in oxidative stress response, photsynthetic pathways, and some were classified hypothetical proteins and/or unknown (30% of total). Thus, our data allows us to propose that this treatment induced an oxidative stress and the plant in response changed its physiological process, it made changes in tissue, changed the redox response in order to survival to this new condition

Profile of cortisol, glycaemia, and blood parameters of American Bullfrog tadpoles Lithobates catesbeianus exposed to density and hypoxia stressors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção e qualidade fisiológica de sementes de soja avaliadas na semeadura de inverno

O cultivo da soja fora da época convencional pode ser uma alternativa de rotação de cultura além de proporcionar sementes de melhor qualidade fisiológica, que podem ser utilizadas na semeadura da próxima safra diminuindo o período de armazenamento. O trabalho de pesquisa teve por objetivo avaliar o comportamento de sete cultivares de soja, em três densidades populacionais, quanto ao porte e altura de inserção da primeira vagem, assim como quanto à produção e qualidade fisiológica das sementes, semeadas no período de inverno, na região de Selvíria-MS. O delineamento experimental foi em blocos casualizados, com quatro repetições, dispostos em esquema fatorial 7 ×3. Os tratamentos constaram de sete cultivares (IAC-16, IAC-Foscarin 31, FT-2, IAC-17, IAC-8, Doko e FT-Cristalina) e três densidades de plantas (300, 400 e 500 mil plantas ha-1). O ciclo da soja foi reduzido no cultivo de inverno, principalmente nos cultivares considerados tardios. O fotoperíodo no cultivo de inverno reduziu o período entre o florescimento e a maturação. O cultivar IAC-8 foi o menos sensível ao fotoperíodo, possuindo maturação em época semelhante aos cultivares tardios, e apresentou as melhores características agronômicas para o cultivo no período de inverno. É aconselhável o aumento de densidade de semeadura quando do uso de cultivares precoces em cultivos de inverno. Não é aconselhável armazenar sementes em condições ambientes, principalmente com valores de germinação próximo ao limite inferior desejável (80%).

Pool of Resistance Mechanisms to Glyphosate in Digitaria insularis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Germinação de sementes de melão-de-são-caetano sob variação de água, luz e temperatura

The purpose of this study was to evaluate germination of Momordica charantia L. seeds under different conditions of: water availability (0.0, -0.2, -0.4, -0.6, -0.8 and -1.0 MPa), temperature (10, 15, 20, 25, 30 and 35 degrees C) and quality of incident light (filter dark, red, green, yellow, red off, blue, orange and without filter). For each variable evaluated, experiments were carried out in a completely randomized design with four replicates kept under controlled conditions (germination chamber). There were higher percentages of germination under conditions of mild water restriction (-0.2 MPa) and temperatures around 25 degrees C, regardless of the quality of light. Temperatures below 20 degrees C and above 30 degrees C reduced germination, although lower temperatures had strongly effects on germination. Water availability lower than -0.2 MPa strongly reduced germination, which was inhibited in the treatments of -0.8 and 1.0 MPa.