983 resultados para Communication protocol stack
Resumo:
Although power-line communication (PLC) is not a new technology, its use to support data communication with timing requirements is still the focus of ongoing research. A new infrastructure intended for communication using power lines from a central location to dispersed nodes using inexpensive devices was presented recently. This new infrastructure uses a two-level hierarchical power-line system, together with an IP-based network. Due to the master-slave behaviour of the PLC medium access, together with the inherent dynamic topology of power-line networks, a mechanism to provide end-to-end communication through the two levels of the power-line system must be provided. In this paper we introduce the architecture of the PLC protocol layer that is being implemented for this end.
Resumo:
Controller area network (CAN) is a fieldbus network suitable for small-scale distributed computer controlled systems (DCCS), being appropriate for sending and receiving short real-time messages at speeds up to 1 Mbit/sec. Several studies are available on how to guarantee the real-time requirements of CAN messages, providing preruntime schedulability conditions to guarantee the real-time communication requirements of DCCS traffic. Usually, it is considered that CAN guarantees atomic multicast properties by means of its extensive error detection/signaling mechanisms. However, there are some error situations where messages can be delivered in duplicate or delivered only by a subset of the receivers, leading to inconsistencies in the supported applications. In order to prevent such inconsistencies, a middleware for reliable communication in CAN is proposed, taking advantage of CAN synchronous properties to minimize the runtime overhead. Such middleware comprises a set of atomic multicast and consolidation protocols, upon which the reliable communication properties are guaranteed. The related timing analysis demonstrates that, in spite of the extra stack of protocols, the real-time properties of CAN are preserved since the predictability of message transfer is guaranteed.
Resumo:
In this paper, we focus on large-scale and dense Cyber- Physical Systems, and discuss methods that tightly integrate communication and computing with the underlying physical environment. We present Physical Dynamic Priority Dominance ((PD)2) protocol that exemplifies a key mechanism to devise low time-complexity communication protocols for large-scale networked sensor systems. We show that using this mechanism, one can compute aggregate quantities such as the maximum or minimum of sensor readings in a time-complexity that is equivalent to essentially one message exchange. We also illustrate the use of this mechanism in a more complex task of computing the interpolation of smooth as well as non-smooth sensor data in very low timecomplexity.
Resumo:
This project was developed within the ART-WiSe framework of the IPP-HURRAY group (http://www.hurray.isep.ipp.pt), at the Polytechnic Institute of Porto (http://www.ipp.pt). The ART-WiSe – Architecture for Real-Time communications in Wireless Sensor networks – framework (http://www.hurray.isep.ipp.pt/art-wise) aims at providing new communication architectures and mechanisms to improve the timing performance of Wireless Sensor Networks (WSNs). The architecture is based on a two-tiered protocol structure, relying on existing standard communication protocols, namely IEEE 802.15.4 (Physical and Data Link Layers) and ZigBee (Network and Application Layers) for Tier 1 and IEEE 802.11 for Tier 2, which serves as a high-speed backbone for Tier 1 without energy consumption restrictions. Within this trend, an application test-bed is being developed with the objectives of implementing, assessing and validating the ART-WiSe architecture. Particularly for the ZigBee protocol case; even though there is a strong commercial lobby from the ZigBee Alliance (http://www.zigbee.org), there is neither an open source available to the community for this moment nor publications on its adequateness for larger-scale WSN applications. This project aims at fulfilling these gaps by providing: a deep analysis of the ZigBee Specification, mainly addressing the Network Layer and particularly its routing mechanisms; an identification of the ambiguities and open issues existent in the ZigBee protocol standard; the proposal of solutions to the previously referred problems; an implementation of a subset of the ZigBee Network Layer, namely the association procedure and the tree routing on our technological platform (MICAz motes, TinyOS operating system and nesC programming language) and an experimental evaluation of that routing mechanism for WSNs.
Resumo:
Develop a client-server application for a mobile environment can bring many challenges because of the mobile devices limitations. So, in this paper is discussed what can be the more reliable way to exchange information between a server and an Android mobile application, since it is important for users to have an application that really works in a responsive way and preferably without any errors. In this discussion two data transfer protocols (Socket and HTTP) and three serialization data formats (XML, JSON and Protocol Buffers) were tested using some metrics to evaluate which is the most practical and fast to use.
Resumo:
A Internet, conforme a conhecemos, foi projetada com base na pilha de protocolos TCP/IP, que foi desenvolvida nos anos 60 e 70 utilizando um paradigma centrado nos endereços individuais de cada máquina (denominado host-centric). Este paradigma foi extremamente bem-sucedido em interligar máquinas através de encaminhamento baseado no endereço IP. Estudos recentes demonstram que, parte significativa do tráfego atual da Internet centra-se na transferência de conteúdos, em vez das tradicionais aplicações de rede, conforme foi originalmente concebido. Surgiram então novos modelos de comunicação, entre eles, protocolos de rede ponto-a-ponto, onde cada máquina da rede pode efetuar distribuição de conteúdo (denominadas de redes peer-to-peer), para melhorar a distribuição e a troca de conteúdos na Internet. Por conseguinte, nos últimos anos o paradigma host-centric começou a ser posto em causa e apareceu uma nova abordagem de Redes Centradas na Informação (ICN - information-centric networking). Tendo em conta que a Internet, hoje em dia, basicamente é uma rede de transferência de conteúdos e informações, porque não centrar a sua evolução neste sentido, ao invés de comunicações host-to-host? O paradigma de Rede Centrada no Conteúdo (CCN - Content Centric Networking) simplifica a solução de determinados problemas de segurança relacionados com a arquitetura TCP/IP e é uma das principais propostas da nova abordagem de Redes Centradas na Informação. Um dos principais problemas do modelo TCP/IP é a proteção do conteúdo. Atualmente, para garantirmos a autenticidade e a integridade dos dados partilhados na rede, é necessário garantir a segurança do repositório e do caminho que os dados devem percorrer até ao seu destino final. No entanto, a contínua ineficácia perante os ataques de negação de serviço praticados na Internet, sugere a necessidade de que seja a própria infraestrutura da rede a fornecer mecanismos para os mitigar. Um dos principais pilares do paradigma de comunicação da CCN é focalizar-se no próprio conteúdo e não na sua localização física. Desde o seu aparecimento em 2009 e como consequência da evolução e adaptação a sua designação mudou atualmente para Redes de Conteúdos com Nome (NNC – Named Network Content). Nesta dissertação, efetuaremos um estudo de uma visão geral da arquitetura CCN, apresentando as suas principais características, quais os componentes que a compõem e como os seus mecanismos mitigam os tradicionais problemas de comunicação e de segurança. Serão efetuadas experiências com o CCNx, que é um protótipo composto por um conjunto de funcionalidades e ferramentas, que possibilitam a implementação deste paradigma. O objetivo é analisar criticamente algumas das propostas existentes, determinar oportunidades, desafios e perspectivas para investigação futura.
Resumo:
IEEE International Conference on Communications (IEEE ICC 2015). 8 to 12, Jun, 2015, IEEE ICC 2015 - Communications QoS, Reliability and Modeling, London, United Kingdom.
Resumo:
11th IEEE World Conference on Factory Communication Systems (WFCS 2015). 27 to 29, May, 2015, TII-SS-2: Scheduling and Performance Analysis. Palma de Mallorca, Spain.
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores
Resumo:
In-Band Full-DupleX (IB-FDX) is defined as the ability for nodes to transmit and receive signals simultaneously on the same channel. Conventional digital wireless networks do not implement it, since a node’s own transmission signal causes interference to the signal it is trying to receive. However, recent studies attempt to overcome this obstacle, since it can potentially double the spectral efficiency of current wireless networks. Different mechanisms exist today that are able to reduce a significant part of the Self- Interference (SI), although specially tuned Medium Access Control (MAC) protocols are required to optimize its use. One of IB-FDX’s biggest problems is that the nodes’ interference range is extended, meaning the unusable space for other transmissions and receptions is broader. This dissertation proposes using MultiPacket Reception (MPR) to address this issue and adapts an already existing Single-Carrier with Frequency-Domain Equalization (SC-FDE) receiver to IB-FDX. The performance analysis suggests that MPR and IB-FDX have a strong synergy and are able to achieve higher data rates, when used together. Using analytical models, the optimal transmission patterns and transmission power were identified, which maximize the channel capacity with the minimal energy consumption. This was used to define a new MAC protocol, named Full-duplex Multipacket reception Medium Access Control (FM-MAC). FM-MAC was designed for a single-hop cellular infrastructure, where the Access Point (AP) and the terminals implement both IB-FDX and MPR. It divides the coverage range of the AP into a closer Full-DupleX (FDX) zone and a farther Half-DupleX (HDX) zone and adds a tunable fairness mechanism to avoid terminal starvation. Simulation results show that this protocol provides efficient support for both HDX and FDX terminals, maximizing its capacity when more FDX terminals are used.
Resumo:
Nowadays, data available and used by companies is growing very fast creating the need to use and manage this data in the most efficient way. To this end, data is replicated overmultiple datacenters and use different replication protocols, according to their needs, like more availability or stronger consistency level. The costs associated with full data replication can be very high, and most of the times, full replication is not needed since information can be logically partitioned. Another problem, is that by using datacenters to store and process information clients become heavily dependent on them. We propose a partial replication protocol called ParTree, which replicates data to clients, and organizes clients in a hierarchy, using communication between them to propagate information. This solution addresses some of these problems, namely by supporting partial data replication and offline execution mode. Given the complexity of the protocol, the use of formal verification is crucial to ensure the protocol two correctness properties: causal consistency and preservation of data. The use of TLA+ language and tools to formally specificity and verify the proposed protocol are also described.
Resumo:
BACKGROUND In the year 2020, depression will cause the second highest amount of disability worldwide. One quarter of the population will suffer from depression symptoms at some point in their lives. Mental health services in Western countries are overburdened. Therefore, cost-effective interventions that do not involve mental health services, such as online psychotherapy programs, have been proposed. These programs demonstrate satisfactory outcomes, but the completion rate for patients is low. Health professionals' attitudes towards this type of psychotherapy are more negative than the attitudes of depressed patients themselves. The aim of this study is to describe the profile of depressed patients who would benefit most from online psychotherapy and to identify expectations, experiences, and attitudes about online psychotherapy among both patients and health professionals that can facilitate or hinder its effects. METHODS A parallel qualitative design will be used in a randomised controlled trial on the efficiency of online psychotherapeutic treatment for depression. Through interviews and focus groups, the experiences of treated patients, their reasons for abandoning the program, the expectations of untreated patients, and the attitudes of health professionals will be examined. Questions will be asked about training in new technologies, opinions of online psychotherapy, adjustment to therapy within the daily routine, the virtual and anonymous relationship with the therapist, the process of online communication, information necessary to make progress in therapy, process of working with the program, motivations and attitudes about treatment, expected consequences, normalisation of this type of therapy in primary care, changes in the physician-patient relationship, and resources and risks. A thematic content analysis from the grounded theory for interviews and an analysis of the discursive positions of participants based on the sociological model for focus groups will be performed. DISCUSSION Knowledge of the expectations, experiences, and attitudes of both patients and medical personnel regarding online interventions for depression can facilitate the implementation of this new psychotherapeutic tool. This qualitative investigation will provide thorough knowledge of the perceptions, beliefs, and values of patients and clinicians, which will be very useful for understanding how to implement this intervention method for depression.
Resumo:
BACKGROUND Breast cancer survivors suffer physical impairment after oncology treatment. This impairment reduces quality of life (QoL) and increase the prevalence of handicaps associated to unhealthy lifestyle (for example, decreased aerobic capacity and strength, weight gain, and fatigue). Recent work has shown that exercise adapted to individual characteristics of patients is related to improved overall and disease-free survival. Nowadays, technological support using telerehabilitation systems is a promising strategy with great advantage of a quick and efficient contact with the health professional. It is not known the role of telerehabilitation through therapeutic exercise as a support tool to implement an active lifestyle which has been shown as an effective resource to improve fitness and reduce musculoskeletal disorders of these women. METHODS / DESIGN This study will use a two-arm, assessor blinded, parallel randomized controlled trial design. People will be eligible if: their diagnosis is of stages I, II, or IIIA breast cancer; they are without chronic disease or orthopedic issues that would interfere with ability to participate in a physical activity program; they had access to the Internet and basic knowledge of computer use or living with a relative who has this knowledge; they had completed adjuvant therapy except for hormone therapy and not have a history of cancer recurrence; and they have an interest in improving lifestyle. Participants will be randomized into e-CUIDATE or usual care groups. E-CUIDATE give participants access to a range of contents: planning exercise arranged in series with breathing exercises, mobility, strength, and stretching. All of these exercises will be assigned to women in the telerehabilitation group according to perceived needs. The control group will be asked to maintain their usual routine. Study endpoints will be assessed after 8 weeks (immediate effects) and after 6 months. The primary outcome will be QoL measured by The European Organization for Research and Treatment of Cancer Quality of Life Questionnaire Core 30 version 3.0 and breast module called The European Organization for Research and Treatment of Cancer Breast Cancer-Specific Quality of Life questionnaire. The secondary outcomes: pain (algometry, Visual Analogue Scale, Brief Pain Inventory short form); body composition; physical measurement (abdominal test, handgrip strength, back muscle strength, and multiple sit-to-stand test); cardiorespiratory fitness (International Fitness Scale, 6-minute walk test, International Physical Activity Questionnaire-Short Form); fatigue (Piper Fatigue Scale and Borg Fatigue Scale); anxiety and depression (Hospital Anxiety and Depression Scale); cognitive function (Trail Making Test and Auditory Consonant Trigram); accelerometry; lymphedema; and anthropometric perimeters. DISCUSSION This study investigates the feasibility and effectiveness of a telerehabilitation system during adjuvant treatment of patients with breast cancer. If this treatment option is effective, telehealth systems could offer a choice of supportive care to cancer patients during the survivorship phase. TRIAL REGISTRATION ClinicalTrials.gov Identifier: NCT01801527.
Resumo:
Background: Choosing an adequate measurement instrument depends on the proposed use of the instrument, the concept to be measured, the measurement properties (e.g. internal consistency, reproducibility, content and construct validity, responsiveness, and interpretability), the requirements, the burden for subjects, and costs of the available instruments. As far as measurement properties are concerned, there are no sufficiently specific standards for the evaluation of measurement properties of instruments to measure health status, and also no explicit criteria for what constitutes good measurement properties. In this paper we describe the protocol for the COSMIN study, the objective of which is to develop a checklist that contains COnsensus-based Standards for the selection of health Measurement INstruments, including explicit criteria for satisfying these standards. We will focus on evaluative health related patient-reported outcomes (HR-PROs), i.e. patient-reported health measurement instruments used in a longitudinal design as an outcome measure, excluding health care related PROs, such as satisfaction with care or adherence. The COSMIN standards will be made available in the form of an easily applicable checklist.Method: An international Delphi study will be performed to reach consensus on which and how measurement properties should be assessed, and on criteria for good measurement properties. Two sources of input will be used for the Delphi study: (1) a systematic review of properties, standards and criteria of measurement properties found in systematic reviews of measurement instruments, and (2) an additional literature search of methodological articles presenting a comprehensive checklist of standards and criteria. The Delphi study will consist of four (written) Delphi rounds, with approximately 30 expert panel members with different backgrounds in clinical medicine, biostatistics, psychology, and epidemiology. The final checklist will subsequently be field-tested by assessing the inter-rater reproducibility of the checklist.Discussion: Since the study will mainly be anonymous, problems that are commonly encountered in face-to-face group meetings, such as the dominance of certain persons in the communication process, will be avoided. By performing a Delphi study and involving many experts, the likelihood that the checklist will have sufficient credibility to be accepted and implemented will increase.
Resumo:
BACKGROUND: We devised a randomised controlled trial to evaluate the effectiveness and efficiency of an intervention based on case management care for frequent emergency department users. The aim of the intervention is to reduce such patients' emergency department use, to improve their quality of life, and to reduce costs consequent on frequent use. The intervention consists of a combination of comprehensive case management care and standard emergency care. It uses a clinical case management model that is patient-identified, patient-directed, and developed to provide high intensity services. It provides a continuum of hospital- and community-based patient services, which include clinical assessment, outreach referral, and coordination and communication with other service providers. METHODS/DESIGN: We aim to recruit, during the first year of the study, 250 patients who visit the emergency department of the University Hospital of Lausanne, Switzerland. Eligible patients will have visited the emergency department 5 or more times during the previous 12 months. Randomisation of the participants to the intervention or control groups will be computer generated and concealed. The statistician and each patient will be blinded to the patient's allocation. Participants in the intervention group (N = 125), additionally to standard emergency care, will receive case management from a team, 1 (ambulatory care) to 3 (hospitalization) times during their stay and after 1, 3, and 5 months, at their residence, in the hospital or in the ambulatory care setting. In between the consultations provided, the patients will have the opportunity to contact, at any moment, the case management team. Participants in the control group (N = 125) will receive standard emergency care only. Data will be collected at baseline and 2, 5.5, 9, and 12 months later, including: number of emergency department visits, quality of life (EuroQOL and WHOQOL), health services use, and relevant costs. Data on feelings of discrimination and patient's satisfaction will also be collected at the baseline and 12 months later. DISCUSSION: Our study will help to clarify knowledge gaps regarding the positive outcomes (emergency department visits, quality of life, efficiency, and cost-utility) of an intervention based on case management care. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT01934322.