Innovative concepts and technology for railroad-highway grade crossing motorist warning systems. Vol. II: the generation and analysis of alternative concepts. Final report.

Transportation Systems Center, Cambridge, Mass.

Physical and MAC layer techniques for next generation satellite communications

In this thesis, we consider four different scenarios of interest in modern satellite communications. For each scenario, we will propose the use of advanced solutions aimed at increasing the spectral efficiency of the communication links. First, we will investigate the optimization of the current standard for digital video broadcasting. We will increase the symbol rate of the signal and determine the optimal signal bandwidth. We will apply the time packing technique and propose a specifically design constellation. We will then compare some receiver architectures with different performance and complexity. The second scenario still addresses broadcast transmissions, but in a network composed of two satellites. We will compare three alternative transceiver strategies, namely, signals completely overlapped in frequency, frequency division multiplexing, and the Alamouti space-time block code, and, for each technique, we will derive theoretical results on the achievable rates. We will also evaluate the performance of said techniques in three different channel models. The third scenario deals with the application of multiuser detection in multibeam satellite systems. We will analyze a case in which the users are near the edge of the coverage area and, hence, they experience a high level of interference from adjacent cells. Also in this case, three different approaches will be compared. A classical approach in which each beam carries information for a user, a cooperative solution based on time division multiplexing, and the Alamouti scheme. The information theoretical analysis will be followed by the study of practical coded schemes. We will show that the theoretical bounds can be approached by a properly designed code or bit mapping. Finally, we will consider an Earth observation scenario, in which data is generated on the satellite and then transmitted to the ground. We will study two channel models, taking into account one or two transmit antennas, and apply techniques such as time and frequency packing, signal predistortion, multiuser detection and the Alamouti scheme.

Advanced receivers for next generation wireless communication systems

Despite extensive progress on the theoretical aspects of spectral efficient communication systems, hardware impairments, such as phase noise, are the key bottlenecks in next generation wireless communication systems. The presence of non-ideal oscillators at the transceiver introduces time varying phase noise and degrades the performance of the communication system. Significant research literature focuses on joint synchronization and decoding based on joint posterior distribution, which incorporate both the channel and code graph. These joint synchronization and decoding approaches operate on well designed sum-product algorithms, which involves calculating probabilistic messages iteratively passed between the channel statistical information and decoding information. Channel statistical information, generally entails a high computational complexity because its probabilistic model may involve continuous random variables. The detailed knowledge about the channel statistics for these algorithms make them an inadequate choice for real world applications due to power and computational limitations. In this thesis, novel phase estimation strategies are proposed, in which soft decision-directed iterative receivers for a separate A Posteriori Probability (APP)-based synchronization and decoding are proposed. These algorithms do not require any a priori statistical characterization of the phase noise process. The proposed approach relies on a Maximum A Posteriori (MAP)-based algorithm to perform phase noise estimation and does not depend on the considered modulation/coding scheme as it only exploits the APPs of the transmitted symbols. Different variants of APP-based phase estimation are considered. The proposed algorithm has significantly lower computational complexity with respect to joint synchronization/decoding approaches at the cost of slight performance degradation. With the aim to improve the robustness of the iterative receiver, we derive a new system model for an oversampled (more than one sample per symbol interval) phase noise channel. We extend the separate APP-based synchronization and decoding algorithm to a multi-sample receiver, which exploits the received information from the channel by exchanging the information in an iterative fashion to achieve robust convergence. Two algorithms based on sliding block-wise processing with soft ISI cancellation and detection are proposed, based on the use of reliable information from the channel decoder. Dually polarized systems provide a cost-and spatial-effective solution to increase spectral efficiency and are competitive candidates for next generation wireless communication systems. A novel soft decision-directed iterative receiver, for separate APP-based synchronization and decoding, is proposed. This algorithm relies on an Minimum Mean Square Error (MMSE)-based cancellation of the cross polarization interference (XPI) followed by phase estimation on the polarization of interest. This iterative receiver structure is motivated from Master/Slave Phase Estimation (M/S-PE), where M-PE corresponds to the polarization of interest. The operational principle of a M/S-PE block is to improve the phase tracking performance of both polarization branches: more precisely, the M-PE block tracks the co-polar phase and the S-PE block reduces the residual phase error on the cross-polar branch. Two variants of MMSE-based phase estimation are considered; BW and PLP.

Extracting Business Rules through Static Analysis of the Source Code

Красимир Манев, Нели Манева, Хараламби Хараламбиев - Подходът с използване на бизнес правила (БП) беше въведен в края на миналия век, за да се улесни специфицирането на фирмен софтуер и да може той да задоволи по-добре нуждите на съответния бизнес. Днес повечето от целите на подхода са постигнати. Но усилията, в научно-изследователски и практически аспект, за постигане на „’формална основа за обратно извличане на БП от съществуващи системи “продължават. В статията е представен подход за извличане на БП от програмен код, базиран на методи за статичен анализ на кода. Посочени са някои предимства и недостатъци на такъв подход.

Realization of Differentiated Quality of Service for Wideband Code Division Multiple Access Core Network

The development of 3G (the 3rd generation telecommunication) value-added services brings higher requirements of Quality of Service (QoS). Wideband Code Division Multiple Access (WCDMA) is one of three 3G standards, and enhancement of QoS for WCDMA Core Network (CN) becomes more and more important for users and carriers. The dissertation focuses on enhancement of QoS for WCDMA CN. The purpose is to realize the DiffServ (Differentiated Services) model of QoS for WCDMA CN. Based on the parallelism characteristic of Network Processors (NPs), the NP programming model is classified as Pool of Threads (POTs) and Hyper Task Chaining (HTC). In this study, an integrated programming model that combines both of the two models was designed. This model has highly efficient and flexible features, and also solves the problems of sharing conflicts and packet ordering. We used this model as the programming model to realize DiffServ QoS for WCDMA CN. ^ The realization mechanism of the DiffServ model mainly consists of buffer management, packet scheduling and packet classification algorithms based on NPs. First, we proposed an adaptive buffer management algorithm called Packet Adaptive Fair Dropping (PAFD), which takes into consideration of both fairness and throughput, and has smooth service curves. Then, an improved packet scheduling algorithm called Priority-based Weighted Fair Queuing (PWFQ) was introduced to ensure the fairness of packet scheduling and reduce queue time of data packets. At the same time, the delay and jitter are also maintained in a small range. Thirdly, a multi-dimensional packet classification algorithm called Classification Based on Network Processors (CBNPs) was designed. It effectively reduces the memory access and storage space, and provides less time and space complexity. ^ Lastly, an integrated hardware and software system of the DiffServ model of QoS for WCDMA CN was proposed. It was implemented on the NP IXP2400. According to the corresponding experiment results, the proposed system significantly enhanced QoS for WCDMA CN. It extensively improves consistent response time, display distortion and sound image synchronization, and thus increases network efficiency and saves network resource.^

Hourly values of X, Y and Z geomagnetic components recorded at Coimbra Station (IAGA code: COI) and local geomagnetic K indices for 2007 to 2014

This study examines the performance of series of two geomagnetic indices and series synthesized from a semi-empirical model of magnetospheric currents, in explaining the geomagnetic activity observed at Northern Hemipshere's mid-latitude ground-based stations. We analyse data, for the 2007 to 2014 period, from four magnetic observatories (Coimbra, Portugal; Panagyurishte, Bulgary; Novosibirsk, Russia and Boulder, USA), at geomagnetic latitudes between 40° and 50° N. The quiet daily (QD) variation is firstly removed from the time series of the geomagnetic horizontal component (H) using natural orthogonal components (NOC) tools. We compare the resulting series with series of storm-time disturbance (Dst) and ring current (RC) indices and with H series synthesized from the Tsyganenko and Sitnov (2005, doi:10.1029/2004JA010798) (TS05) semi-empirical model of storm-time geomagnetic field. In the analysis, we separate days with low and high local K-index values. Our results show that NOC models are as efficient as standard models of QD variation in preparing raw data to be compared with proxies, but with much less complexity. For the two stations in Europe, we obtain indication that NOC models could be able to separate ionospheric and magnetospheric contributions. Dst and RC series explain the four observatory H-series successfully, with values for the mean of significant correlation coefficients, from 0.5 to 0.6 during low geomagnetic activity (K less than 4) and from 0.6 to 0.7 for geomagnetic active days (K greater than or equal to 4). With regard to the performance of TS05, our results show that the four observatories separate into two groups: Coimbra and Panagyurishte, in one group, for which the magnetospheric/ionospheric ratio in QD variation is smaller, a dominantly QD ionospheric contribution can be removed and TS05 simulations are the best proxy; Boulder and Novosibirsk,in the other group, for which the ionospheric and magnetospheric contributions in QD variation can not be differentiated and correlations with TS05 series can not be made to improve. The main contributor to magnetospheric QD signal are Birkeland currents. The relatively good success of TS05 model in explaining ground-based irregular geomagnetic activity at mid-latitudes makes it an effective tool to classify storms according to their main sources. For Coimbra and Panagyurishte in particular, where ionospheric and magnetospheric daily contributions seem easier to separate, we can aspire to use the TS05 model for ensemble generation in space weather (SW) forecasting and interpretation of past SW events.

A probabilistic approach to the estimation of regional photovoltaic power generation using meteorological data

In Germany the upscaling algorithm is currently the standard approach for evaluating the PV power produced in a region. This method involves spatially interpolating the normalized power of a set of reference PV plants to estimate the power production by another set of unknown plants. As little information on the performances of this method could be found in the literature, the first goal of this thesis is to conduct an analysis of the uncertainty associated to this method. It was found that this method can lead to large errors when the set of reference plants has different characteristics or weather conditions than the set of unknown plants and when the set of reference plants is small. Based on these preliminary findings, an alternative method is proposed for calculating the aggregate power production of a set of PV plants. A probabilistic approach has been chosen by which a power production is calculated at each PV plant from corresponding weather data. The probabilistic approach consists of evaluating the power for each frequently occurring value of the parameters and estimating the most probable value by averaging these power values weighted by their frequency of occurrence. Most frequent parameter sets (e.g. module azimuth and tilt angle) and their frequency of occurrence have been assessed on the basis of a statistical analysis of parameters of approx. 35 000 PV plants. It has been found that the plant parameters are statistically dependent on the size and location of the PV plants. Accordingly, separate statistical values have been assessed for 14 classes of nominal capacity and 95 regions in Germany (two-digit zip-code areas). The performances of the upscaling and probabilistic approaches have been compared on the basis of 15 min power measurements from 715 PV plants provided by the German distribution system operator LEW Verteilnetz. It was found that the error of the probabilistic method is smaller than that of the upscaling method when the number of reference plants is sufficiently large (>100 reference plants in the case study considered in this chapter). When the number of reference plants is limited (<50 reference plants for the considered case study), it was found that the proposed approach provides a noticeable gain in accuracy with respect to the upscaling method.

Détection de vulnérabilités appliquée à la vérification de code intermédiaire de Java Card

La vérification de la résistance aux attaques des implémentations embarquées des vérifieurs de code intermédiaire Java Card est une tâche complexe. Les méthodes actuelles n'étant pas suffisamment efficaces, seule la génération de tests manuelle est possible. Pour automatiser ce processus, nous proposons une méthode appelée VTG (Vulnerability Test Generation, génération de tests de vulnérabilité). En se basant sur une représentation formelle des comportements fonctionnels du système sous test, un ensemble de tests d'intrusions est généré. Cette méthode s'inspire des techniques de mutation et de test à base de modèle. Dans un premier temps, le modèle est muté selon des règles que nous avons définies afin de représenter les potentielles attaques. Les tests sont ensuite extraits à partir des modèles mutants. Deux modèles Event-B ont été proposés. Le premier représente les contraintes structurelles des fichiers d'application Java Card. Le VTG permet en quelques secondes de générer des centaines de tests abstraits. Le second modèle est composé de 66 événements permettant de représenter 61 instructions Java Card. La mutation est effectuée en quelques secondes. L'extraction des tests permet de générer 223 tests en 45 min. Chaque test permet de vérifier une précondition ou une combinaison de préconditions d'une instruction. Cette méthode nous a permis de tester différents mécanismes d'implémentations de vérifieur de code intermédiaire Java Card. Bien que développée pour notre cas d'étude, la méthode proposée est générique et a été appliquée à d'autres cas d'études.

Evolutions of an Online Generation: Education, Industry and IMC

This paper traces the evolutions of a new generation of students who are predominantly the ‘online generation’; explores the emerging impact of this generation on industry; identifies the changing role of education from traditional classroom to an online environment; and explores the contribution related to integrated marketing communications (IMC). Educational requirements from a business perspective must incorporate global business demands; virtual learning environments progress the online generation towards a post-modern learning state. The central proposition of this paper is that the emergence of IMC in evolving industry practices is influenced by student generations who are producing a new paradigm of alignment between education and industry. This is purely a conceptual exploration using limited examples to provide some context and illustrate the questions raised for consideration.