Barreiras não-tarifárias às exportações de carne bovina do Rio Grande do Sul sob a ótica do Sistema Integrado Agronegocial (SIAN)

O comércio internacional da carne bovina apresenta-se protegido por medidas restritivas como as barreiras tarifárias e não-tarifárias. A presente pesquisa teve como objetivo geral identificar as barreiras comerciais que afetam as exportações de carne bovina, sob a ótica dos frigoríficos do Rio Grande do Sul. Especificamente foi caracterizado o processo de exportação, identificados os mercados importadores e barreiras não-tarifárias que influenciam as exportações dos frigoríficos. Para subsidiar a análise, foram utilizados os conceitos de competitividade, barreiras comerciais, cadeia agroindustrial e o Modelo Integrado Agronegocial (SIAN). Para identificar e caracterizar as barreiras comerciais, os agentes, a cadeia agroindustrial exportadora de carne bovina, os mecanismos de atuação dos agentes exportadores e fatores de competitividade. Trata-se de uma pesquisa exploratória. Para identificar e classificar as barreiras comerciais foi utilizado um questionário com escala não comparativa de classificação por itens, graduada de sete pontos. Os resultados obtidos demonstraram que os principais compradores da carne bovina gaúcha são Alemanha, Arábia Saudita, Argentina, Canadá, Chile, Coréia do Sul, Espanha, EUA, Hong Kong, Itália, Países Baixos, Porto Rico, Portugal, Reino Unido e Uruguai. Quanto às barreiras não-tarifárias, especificamente as barreiras técnicas são as que mais afetam as exportações, na percepção dos frigoríficos, sendo as principais: requisitos de inspeção, registro do estabelecimento exportador-SIF, inspeção prévia, sanitárias, requisitos de etiquetas, registro do produto, regulamentações técnicas e padronização, requisitos ambientais (ISO 14000), normas e impostos indiretos e trâmites aduaneiros excessivos. As barreiras tarifárias são importantes, porém mereceu menos atenção no contexto deste estudo. O processo de exportação de carne bovina envolve três operações básicas, que são as comerciais, financeiras e burocráticas, além de envolver Órgãos Gestores (Secretaria da Receita Federal, Banco Central, Secretaria de Comércio Exterior), Órgãos Anuentes (Ministério da Agricultura – SIF e outros) e Agentes Especializados (Despachante Aduaneiro, Transportadoras Marítimas e Rodoviárias, Bancos, Corretores de Câmbio, Trading Agent, Embalagens e Seguradoras, entre outros).

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Formulação de massas cerâmicas para porcelanas elétricas utilizando resíduos oriundos de corpos de fusíveis

The power industry generates as waste ceramic bodies of electrical fuses that are discarded after use. The formulation of ceramic bodies for porcelain electrical insulators using waste from the bodies fuse allocation promotes environmentally appropriate, through the reuse of the material. This work evaluated the technical feasibility of using waste for use in electrical porcelains with formulations containing the residue, feldspar and kaolinite. The raw materials were processed through grinding and sieving to 200 mesh. The ceramic material obtained from the proposed formulations with 25%, 30%, 34% and 40% of the residue went through a vibratory mill for grinding and homogenization, and then were sieved at 325 mesh. The samples were shaped in a uniaxial press, with the application of 25 MPa and sintered at 1100° C, 1150°C, 1200°C, 1225°C and 1250°C, at levels of 20 and 45 minutes. Were also developed bodies of evidence with reference formulations obtained without residue, to establish a comparison on physical, mechanical and electrical. The tests were conducted and technology: linear shrinkage, porosity, water absorption, resistance to bending to three points, measuring insulation resistance electrical resistivity of the material, X-ray diffraction and X-ray fluorescence Waste characterizations pointed to the existence of two phases: mullite and quartz phases are of great importance in the microstructure of the ceramic and this fact reveals a possibility for reuse in electrical porcelains. The mullite is an important constituent because it is a phase that makes it possible to increase the mechanical strength in addition to the body allows the use at high temperatures. The use of ceramic bodies residue fuses, proved feasible for application in electrical porcelain and the most significant results were obtained by the formulations with 25% waste and sintering at 1200°C

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Estudos hidroquímicos da água produzida de um determinado campo de petróleo da bacia potiguar

Waste generated during the exploration and production of oil, water stands out due to various factors including the volume generated, the salt content, the presence of oil and chemicals and the water associated with oil is called produced water. The chemical composition of water is complex and depends strongly on the field generator, because it was in contact with the geological formation for thousands of years. This work aims to characterize the hydrochemical water produced in different areas of a field located in the Potiguar Basin. We collected 27 samples from 06 zones (400, 600, 400/600, 400/450/500, 350/400, A) the producing field called S and measured 50 required parameter divided between physical and chemical parameters, cations and anions. In hydrochemical characterization was used as tools of reasons ionic calculations, diagrams and they hydrochemical classification diagram Piper and Stiff diagram and also the statistic that helped in the identification of signature patterns for each production area including the area that supplies water injected this field for secondary oil recovery. The ionic balance error was calculated to assess the quality of the results of the analysis that was considered good, because 89% of the samples were below 5% error. Hydrochemical diagrams classified the waters as sodium chloride, with the exception of samples from Area A, from the injection well, which were classified as sodium bicarbonate. Through descriptive analysis and discriminant analysis was possible to obtain a function that differs chemically production areas, this function had a good hit rate of classification was 85%

Metodologias estatísticas aplicadas a dados de análises químicas da água produzida em um campo maduro de petróleo

Produced water is characterized as one of the most common wastes generated during exploration and production of oil. This work aims to develop methodologies based on comparative statistical processes of hydrogeochemical analysis of production zones in order to minimize types of high-cost interventions to perform identification test fluids - TIF. For the study, 27 samples were collected from five different production zones were measured a total of 50 chemical species. After the chemical analysis was applied the statistical data, using the R Statistical Software, version 2.11.1. Statistical analysis was performed in three steps. In the first stage, the objective was to investigate the behavior of chemical species under study in each area of production through the descriptive graphical analysis. The second step was to identify a function that classify production zones from each sample, using discriminant analysis. In the training stage, the rate of correct classification function of discriminant analysis was 85.19%. The next stage of processing of the data used for Principal Component Analysis, by reducing the number of variables obtained from the linear combination of chemical species, try to improve the discriminant function obtained in the second stage and increase the discrimination power of the data, but the result was not satisfactory. In Profile Analysis curves were obtained for each production area, based on the characteristics of the chemical species present in each zone. With this study it was possible to develop a method using hydrochemistry and statistical analysis that can be used to distinguish the water produced in mature fields of oil, so that it is possible to identify the zone of production that is contributing to the excessive elevation of the water volume.

The Beatles: ensaio sobre a ética do amor

The thesis intends to discuss the ethics by the way of love. So, it uses as a mention the musical work and the set of attitudes of the group that changed the way of thinking across the 20th Century mass-comm, entering a new way of thinking about the World: The Beatles. Analyzing the lyrics and the writing of the songs was searched the comprehension of he intrinsic love message at the Ethics it expresses. At the musical art of The Beatles political messages had been announced in a time that the World sought a Ethic way beyond the several declared war and the Cold War. Taking the Edgar Morin works as a base, O método 6, Ética (2005), it sought to understand the idea who permeates the human relations: the good, the possible, the necessary. Another works used as a cognitive base were Meus demônios (2003), Cultura de massas no Século XX: neurose (2005), Cultura de massas no Século XX (2006), The Beatles Anthology (2000) and Many years from now (2000). Holding the Ethics idea showed by Morin were established imaginary lines that perpass the behavior of the group known in the entire World understood till nowadays as tolerance, comprehension, peace, love and endurance messengers. The Beatles operate during the sixties a musical reborn, which allowed to the people the discussion and the reflexion about the World and the human being new behavior,endurance but acting with tolerance. Permeating the basic study, we find the Beatles way, the group origin, the fast walk till success, the spiritual choice, who guide their behavior and the end of the band. The music used as a masscomp instrument passes by the condition of a simple way of communicating. It deeply action feeds feelings, allows transcendence and is showed as target of human being transformation. The Ethics in music passes by the ideological barriers and becomes to comprehension with a clear synthony for the man, cause the polyphony and the new musical order establish the messages worldwide

O sistema de certificação do etanol brasileiro sob a ótica do princípio constitucional do desenvolvimento sustentável

The gradual inclusion of biofuels is a necessary change that countries must include in their energy mixes. Energy sources still widely used in the world, such as oil and coal, are endowed with a high pollution load to the environment, bringing damages to the water, to the air and to humans as well. In addition, although there are conflicting studies, they are also identified as major causes of the greenhouse effect and the global warming phenomenon. They are, moreover, finite sources of energy, given that its reserves will surely run out. However, even if the introduction of biofuels, such as ethanol, in the energy mix is crucial for the survival of the present and future populations, this insertion cannot settle so disorderly and, thus, one must ensure the quality of these resources and promote transparency in international trade. In this manner, a certification process for ethanol is essential to attest that this biofuel meets the sustainable requirements defined for its production. Hence, this study sought to address the importance of the adoption of certification in the ethanol industry, according to the principle of sustainable development, by analyzing the evolution of its concept, its combination with the fundamental objectives sculptured in the Constitution of 1988, its regulation under Brazilian laws and the need for a balance between economic activities and the mentioned principle. The work also encompassed the criteria used to establish certification standards and their participating actors, combined with a study of ongoing initiatives. Finally, the consequences of the adoption of a certification process for ethanol in Brazil were presented, both in terms of sustainable development and in international trade

Integridade tissular de pacientes com úlceras venosas: um estudo baseado na Classificação dos Resultados de Enfermagem

The venous ulcer is an epidemiological problem of high prevalence, causing disability and dependence. Assess the tissue impairment level of patients with venous lesions, within a nursing referential, is relevant for the implementation of a directed assistance to specific clientele. Thus, this work aims to characterize the health status regarding the integrity the lower limbs skin of patients with venous ulcers, according to the of tissue integrity outcome indicators from the Nursing Outcomes Classification. A cross-sectional study conducted in a university hospital in Natal - Rio Grande do Norte. The sample consisted of 50 participants, selected through consecutive sampling. Data collection occurred through a interview and physical examination form and a operational definitions tool for indicators of the nursing Tissue Integrity outcome directed to patients with venous ulcer, applied from February to June 2012. Data analysis was done by descriptive statistics and nonparametric tests (Spearman, Kruskal-Wallis and Mann-Whitney tests). The project was approved by the Research Ethics Committee with protocol 608/11 and Presentation Certificate to Ethical Consideration No. 0038.0.294.000-11. The results were presented using three scientific articles derivatives of research. It was found that the indicators show moderate impairment, light and not impaired, as the median. The respondents had an average of 59.72 years, 66% female, 50% were retired, 60% with a partner, 44% had arterial hypertension, 26% allergies, 20% diabetes mellitus, 96% were sedentary, 14% drank alcohol and 6% were smokers. There was a statistically significant correlation of low intensity between age and hydration (p=0.032; rs=-0.304) and skin desquamation (p=0.026; rs=-0.316), family income and necrosis (p=0.012; rs=-0.353); Ankle Brachial Index and tissue perfusion (p=0,044; rs=-0,329); Diabetes Mellitus and texture (p=0.015) and tissue perfusion (p=0.026); allergy and texture (p=0.034), physical activity and hydration (p=0.034), smoking and thickness (p=0.018), and alcohol consumption and exudate (p=0.045). We conclude that the patients had light to moderate impairment, indicating a good state of health on the integrity of the skin of the lower limbs, according to the indicators of the outcome of tissue integrity Classification Nursing Outcomes valued in the present study. It is believed that the evaluation of impairment tissue using a self-nursing system and its relation with socioeconomic, clinical and risk factors are unique tools in the care planning and in the wound healing

Validação de instrumentos para avaliação do conhecimento e da habilidade acerca da higienização simples das mãos

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Classificação de imagens de ambientes coralinos: uma abordagem empregando uma combinação de classificadores e máquina de vetor de suporte

The use of the maps obtained from remote sensing orbital images submitted to digital processing became fundamental to optimize conservation and monitoring actions of the coral reefs. However, the accuracy reached in the mapping of submerged areas is limited by variation of the water column that degrades the signal received by the orbital sensor and introduces errors in the final result of the classification. The limited capacity of the traditional methods based on conventional statistical techniques to solve the problems related to the inter-classes took the search of alternative strategies in the area of the Computational Intelligence. In this work an ensemble classifiers was built based on the combination of Support Vector Machines and Minimum Distance Classifier with the objective of classifying remotely sensed images of coral reefs ecosystem. The system is composed by three stages, through which the progressive refinement of the classification process happens. The patterns that received an ambiguous classification in a certain stage of the process were revalued in the subsequent stage. The prediction non ambiguous for all the data happened through the reduction or elimination of the false positive. The images were classified into five bottom-types: deep water; under-water corals; inter-tidal corals; algal and sandy bottom. The highest overall accuracy (89%) was obtained from SVM with polynomial kernel. The accuracy of the classified image was compared through the use of error matrix to the results obtained by the application of other classification methods based on a single classifier (neural network and the k-means algorithm). In the final, the comparison of results achieved demonstrated the potential of the ensemble classifiers as a tool of classification of images from submerged areas subject to the noise caused by atmospheric effects and the water column

Medição da densidade óssea através de ondas eletromagnéticas e classificação por MVS

This work holds the purpose of presenting an auxiliary way of bone density measurement through the attenuation of electromagnetic waves. In order to do so, an arrangement of two microstrip antennas with rectangular configuration has been used, operating in a frequency of 2,49 GHz, and fed by a microstrip line on a substrate of fiberglass with permissiveness of 4.4 and height of 0,9 cm. Simulations were done with silica, bone meal, silica and gypsum blocks samples to prove the variation on the attenuation level of different combinations. Because of their good reproduction of the human beings anomaly aspects, samples of bovine bone were used. They were subjected to weighing, measurement and microwave radiation. The samples had their masses altered after mischaracterization and the process was repeated. The obtained data were inserted in a neural network and its training was proceeded with the best results gathered by correct classification on 100% of the samples. It comes to the conclusion that through only one non-ionizing wave in the 2,49 GHz zone it is possible to evaluate the attenuation level in the bone tissue, and that with the appliance of neural network fed with obtained characteristics in the experiment it is possible to classify a sample as having low or high bone density

Relação entre o consumo de água e a absorção de herbicidas em plantas daninhas e cana-de-açúcar

O objetivo deste trabalho foi avaliar a relação entre o consumo de água pelas plantas de cana-de-açúcar e plantas daninhas e a absorção de herbicidas. O trabalho foi desenvolvido em dois experimentos: no primeiro, mediu-se o consumo de água através da pesagem diária das espécies de plantas daninhas Digitaria horizontalis, Panicum maximum, Ipomoea grandifolia, Ipomoea hederifolia, Brachiaria decumbens, assim como para os cultivares de cana-deaçúcar PO8862, SP80 3280 e RB83 5486; e, no segundo, foram determinadas as concentrações do amicarbazone, imazapic, tebuthiuron e hexazinone no xilema dos três cultivares de cana-deaçúcar e de I. grandifolia por meio da bomba de Schollander e de cromatografia e espectrometria de massas (LC-MS). A taxa de transpiração e, consequentemente, a taxa de consumo de água mostraram-se determinantes da taxa de absorção de herbicidas pelas plantas de diferentes espécies de plantas daninhas e cultivares de cana-de-açúcar. As concentrações de herbicidas na seiva do xilema foram variáveis em função da espécie e do herbicida em contato com o sistema radicular, indicando que a facilidade de absorção pelas raízes pode ser determinante para eficácia e/ou seletividade de herbicidas.

Obtenção de placas cerâmico a partir de formulações de massas triaxiais de resíduos de caulim, chamote de telha e cinza vegetal

The production of red ceramic is an industrial activity that causes an intense impact. The manufacture of its products considerably increases the demand for natural resources, mainly with the extraction of raw material. The ceramic material produced generates waste, such as ash firewood and chamote. The residue from the beneficiation of kaolin is deposited in a poor, degrades the environment and contaminate water sources and soil, constituting in this manner, ecological disasters. The main objective of this work is to develop the formulation of a ceramic product consisting solely of industrial solid wastes, from ceramic tiles, (chamote) residue of kaolin and ash firewood. It is assumed that this product made in the laboratory can be used in coatings, wall and floor. The aim is to facilitate the replacement of the raw material of original composition of a ceramic body, for waste, while the process of production equal to the conventionally used, so that the properties of the product are reproduced. This work is characterized waste as its chemical composition, analysis of particle size, X-ray diffraction and thermal behavior. Several formulations were studied. The mass of waste was prepared by dry process, pressed to 25 MPa, and then burned in muffle type oven to 850, 950, 1050 and 1150 °C. The results showed that it is technically possible to produce porous tiles only with waste. It was found that the formulations of bodies play a key role in the properties of the final product, as well as the sintering temperature and heating rates. RN in the waste of kaolin is estimated at 15,000 t/month, about 3,000 gray t/month and chamote with 10 million pieces/month damaged. The presence of carbonates of calcium and magnesium at 1050 ° C results in an appropriate porosity and mechanical strength. The formulation M3JE, composed of 69% waste of kaolin, 7.7% and 23.3% of chamote of gray, became suitable for porous materials with the strength and absorption within the level of national and international standards

A influência da adição de caulim, quartzo e feldspato potássico na formulação de massas cerâmicas para telhas: Modelo estatístico

The production of roof tiles in the state of Rio Grande do Norte accounts for around 60% of the total of ceramic pieces produced. There is a need for investment to improve quality and productivity, thereby promoting technological innovations. Accordingly, the aim of this study is to determine the effect of kaolin, potassium feldspar and quartz in two standard formulations, as well as the effect of sintering temperature on the technological properties of linear firing shrinkage, water absorption and bending rupture stress, by fitting the statistical model and using multiple linear regression to assess the relationship between technological properties and independent variables. The raw materials were characterized using the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRF), rational analysis (RA), differential thermal analysis (DTA) and granulometric analysis (GA). The test specimens were compacted by uniaxial pressure (25 MPa), dried in a stove at 110 ºC for 24 hours and sinterized at 850 ºC, 950 ºC and 1050 ºC and held isothermal for 30 minutes. The results obtained indicate that the addition of kaolin to two standard formulations (M and R) promoted a reduction in water absorption values and an increase in bending rupture stress values. The sintering temperatures for group M that resulted in the lowest linear firing shrinkage and water absorption values were 850 ºC and 950 ºC, respectively, and the highest bending rupture stress values were reached at a temperature of 950 ºC. In the case of group R, the sintering temperature that obtained the lowest water absorption and linear firing shrinkage values was 850 ºC, and the highest bending rupture stress values were attained at a temperature of 1050 ºC. This work explains the statistical approach used to fit the model that describes the relationship between the technological properties and percentage of kaolin, quartz and feldspar, as well as the models that enable predictions, provided that the lower and upper limits of the percentage of clay minerals, flux and quartz used in this study are respected. Statistica 6 software was used and results were obtained by stepwise forward regression