Haemulidae, modelo cariotípico de estase evolutiva

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Estudo da molhabilidade de tecidos 100% poliéster tratados em plasma N2/O2 em função do seu envelhecimento natural

This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)

Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Novo método para estimativa do gradiente de fratura para poços de petróleo

The development of oil wells drilling requires additional cares mainly if the drilling is in offshore ultra deep water with low overburden pressure gradients which cause low fracture gradients and, consequently, difficult the well drilling by the reduction of the operational window. To minimize, in the well planning phases, the difficulties faced by the drilling in those sceneries, indirect models are used to estimate fracture gradient that foresees approximate values for leakoff tests. These models generate curves of geopressures that allow detailed analysis of the pressure behavior for the whole well. Most of these models are based on the Terzaghi equation, just differentiating in the determination of the values of rock tension coefficient. This work proposes an alternative method for prediction of fracture pressure gradient based on a geometric correlation that relates the pressure gradients proportionally for a given depth and extrapolates it for the whole well depth, meaning that theses parameters vary in a fixed proportion. The model is based on the application of analytical proportion segments corresponding to the differential pressure related to the rock tension. The study shows that the proposed analytical proportion segments reaches values of fracture gradient with good agreement with those available for leakoff tests in the field area. The obtained results were compared with twelve different indirect models for fracture pressure gradient prediction based on the compacting effect. For this, a software was developed using Matlab language. The comparison was also made varying the water depth from zero (onshore wellbores) to 1500 meters. The leakoff tests are also used to compare the different methods including the one proposed in this work. The presented work gives good results for error analysis compared to other methods and, due to its simplicity, justify its possible application

Eutrophization process in a system used for rearing the nile tilapia (Oreochromis niloticus), São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Florescimento e frutificação do maracujazeiro-amarelo submetido à iluminação artificial, irrigação e sombreamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Max Stirner, o único e o que lhe é próprio: uma interpretação e(m) algun(s) ensaio(s)

This work has a study object the main thinking work of Johan Kaspar Schmidt well known as Max Stirner (1806-1856) - originally titled (in German), Der Einzige und sein Eigentun, and translated into Portuguese by the Portuguese publisher Antígona in 2004, under the title The Unique and its Ownership. This book was known in 1844 although its publication dated 1845 seen that the censor of that time rejected the publication request in that year - saying that ( ) in concrete passages of that work, not only God, Christ, the church and the religion are usually object of proposal blasphemy, but also because all social order, the state and the government are defined as something that should not exist simultaneously as one justifies the lie, perjury, the murder and suicide and denies the ownership right. After this first attack and rejection by its bearing the unique come to be others target, due practically to all the philosophical political thinkers its time including thinkers like Ludwig Feuerbach and Karl Marx & Friedrich Engels in spite of, on the other hand, having inspired formulations and reformulations of many of those thinkers that were against then in their times, as well as those thinkers that came after then such as Nietzsche himself. Even though this work was be victim of powerful attempts of erasing it of history, it has shown a great repercussion power and that is the main reason that led us to ask the following questions what is its big originality? , how could his author arrive at a so impactant perspective? What is its most legitimate political place? We endeavored in elaborate answers to those questions trough the exegesis of its text, taking in account both the scholarship environment where the author produced his intellectual life set - and the detailed reading of texts linked to discussion in focus, where this reading is always based upon the meaning and senses traced by the texts and its contexts as a precaution against the limits and the traps of the readings which shed light markedly on strict letter of the phrases constructs. Ours conclusions point at to the idea that a work like this , that subverts the characteristic ways of thought of the modernity, completely, continues being a utter odds, without rank in the history of thought and the moderns political practices, finding parallel possibility only, in a very special way, with a certain autharchic perspective of Ancient Greece

Efeitos de geada no desenvolvimento do feijoeiro em sucessão a espécies vegetais e adubação nitrogenada

O objetivo deste trabalho foi verificar o efeito de geada no desenvolvimento do feijoeiro em experimentação de cultivo em sucessão a espécies de cobertura e adubação nitrogenada, em delineamento experimental de blocos ao acaso em esquema de parcelas subdivididas, com quatro repetições. As parcelas foram constituídas pelas espécies Sorghum bicolor tipo guinea, Canavalia brasiliensis, Sorghum bicolor, Crotalaria juncea, Pennisetum glaucum e uma testemunha mantida no limpo, enquanto as subparcelas por doses de nitrogênio em cobertura (0, 25, 50 e 75 kg ha-1 de N), utilizando-se como fonte a uréia. Menores danos e severidade da geada foram constatados em plantas de feijão cultivadas após as espécies Canavalia brasiliensis e Crotalaria juncea, devido à menor quantidade de massa seca residual em relação à das culturas de gramíneas. Produtividades superiores de grãos de feijoeiro após geada foram obtidas na sucessão com Crotalária juncea e C. brasiliensis e com a aplicação de doses entre 44,5 e 52,0 kg ha-1 de N, em cobertura.

A violência no contexto de um serviço de urgência: análise do processo de cuidar na visão das vítimas e profissionais de saúde em Natal/RN

Exploratory descriptive study, with a quantitative approach and prospective data, performed in Pronto Socorro Clóvis Sarinho (PSCS), in Natal/RN, aiming to analyze care given by the nursing and medical staff to victims of violence attended to in an emergency hospital in Natal/RN; to identify care given by the nursing and medical staff as viewed by the victims; to compare data observed during the process of care with the victim s view on the care given by the nursing and medical staff; to identify the existing knowledge on violence and the process of caring for victims and its relation with prejudice; to identify obstacles and perspectives for prevention during the process of caring for victims in the emergency services. The population consisted of 97 physicians, 16 nurses, 75 nursing technicians and assistants and 365 victims of violence, with data collected from April to May 2009. Out of 188 professionals, 52.1% are female; 32% were aged 41 to 50; 99.5% had given care to a victim of violence; 90.4% reported to have given care to patients under custody; among these, 17.3% felt prejudice; 55.3% stated they don t provide different care for assaulted victims and assailants, however 44.7% stated they do; 86.7% feel their workplace is unsafe; 61.7% denied the existence of any obstacle and 38.3% reported the existence of obstacles; among these, 26.1% referred to inadequate facilities; 37.8% believe reinforcing security and professional training are the main solutions. Among the 365 researched violence victims, 82.2% were assaulted; male (69.6%); aged 18 to 24 (24.9%); hailing from the Greater Natal area (89.9%); on 19.7% the event happened on Saturday; during the night (48.8%); victim of physical assault (61.4%); produced by body force (27.7%); 24.4% were injured in the head and neck. 57% had used some drug, among which alcohol was predominant (75.5%). On 621 observations performed during the victim care process, when compared to the report of assaulted victims, there was a statistical difference, at 5% significance level, regarding reception, resistance from the professionals, questioning about the violent event, providing of guidance, interaction with the patient and the understanding of receiving proper care, and care resolution. In comparisons involving the observed and the assailant victims reports, there was a statistical difference regarding the resence of resistance from the professionals, performance of necessary procedures and the nteraction with the patient and the understanding of receiving proper care and 58.1% reported the nursing team was the one that provided the best care. We conclude that professionals had lready given care to assailant patients, acknowledge the importance of knowing how the vent took place and acquired this preparation during their practice. The most often referred bstacles that hinder assistance were: inadequate facilities, material deficit and lack of rofessional preparation. As solutions for these problems, they cited the reinforcement of ecurity and professional training

Comparison of methodologies for degree-day estimation using numerical methods

O desenvolvimento de projetos relacionados ao desempenho de diversas culturas tem recebido aperfeiçoamento cada vez maior, incorporado a modelos matemáticos sendo indispensável à utilização de equações cada vez mais consistentes que possibilitem previsão e maior aproximação do comportamento real, diminuindo o erro na obtenção das estimativas. Entre as operações unitárias que demandam maior estudo estão aquelas relacionadas com o crescimento da cultura, caracterizadas pela temperatura ideal para o acréscimo de matéria seca. Pelo amplo uso dos métodos matemáticos na representação, análise e obtenção de estimativas de graus-dia, juntamente com a grande importância que a cultura da cana-de-açúcar tem para a economia brasileira, foi realizada uma avaliação dos modelos matemáticos comumente usados e dos métodos numéricos de integração na estimativa da disponibilidade de graus-dia para essa cultura, na região de Botucatu, Estado de São Paulo. Os modelos de integração, com discretização de 6 em 6 h, apresentaram resultados satisfatórios na estimativa de graus-dia. As metodologias tradicionais apresentaram desempenhos satisfatórios quanto à estimativa de grausdia com base na curva de temperatura horária para cada dia e para os agrupamentos de três, sete, 15 e 30 dias. Pelo método numérico de integração, a região de Botucatu, Estado de São Paulo, apresentou disponibilidade térmica anual média de 1.070,6 GD para a cultura da cana-de-açúcar.

Desenvolvimento de Modelos no Programa DigSILENT PowerFactoryTM para o Estudo de Estabilidade Transitória em Sistemas Elétricos de Potência com Aerogerador

This work presents a description of models development at DigSILENT PowerFactoryT M program for the transient stability study in power systems with wind turbine. The main goal is to make available means to use a dynamic simulation program in power systems, widely published, and utilize it as a tool that helps in programs results evaluations used for this intent. The process of simulations and analyses results starts after the models setting description phase. The results obtained by the DigSILENT PowerFactoryT M and ATP, program chosen to the validation also international recognized, are compared during this phase. The main tools and guide lines of PowerFactoryT M program use are presented here, directing these elements to the solution of the approached problem. For the simulation it is used a real system which it will be connected a wind farm. Two different technologies of wind turbines were implemented: doublyfed induction generator with frequency converter, connecting the rotor to the stator and to the grid, and synchronous wind generator with frequency converter, interconnecting the generator to the grid. Besides presenting the basic conceptions of dynamic simulation, it is described the implemented control strategies and models of turbine and converters. The stability of the wind turbine interconnected to grid is analyzed in many operational conditions, resultant of diverse kinds of disturbances

Maximização da penetração da geração distribuída através do algoritmo de otimização nuvem de partículas

This work develops a methodology for defining the maximum active power being injected into predefined nodes in the studied distribution networks, considering the possibility of multiple accesses of generating units. The definition of these maximum values is obtained from an optimization study, in which further losses should not exceed those of the base case, i.e., without the presence of distributed generation. The restrictions on the loading of the branches and voltages of the system are respected. To face the problem it is proposed an algorithm, which is based on the numerical method called particle swarm optimization, applied to the study of AC conventional load flow and optimal load flow for maximizing the penetration of distributed generation. Alternatively, the Newton-Raphson method was incorporated to resolution of the load flow. The computer program is performed with the SCILAB software. The proposed algorithm is tested with the data from the IEEE network with 14 nodes and from another network, this one from the Rio Grande do Norte State, at a high voltage (69 kV), with 25 nodes. The algorithm defines allowed values of nominal active power of distributed generation, in percentage terms relative to the demand of the network, from reference values

Desenvolvimento de modelos no programa digSILENT powerfactoryTM para o estudo de estabilidade transitória em sistemas elétricos de potência com aerogerador

This work presents a description of models development at DigSILENT PowerFactoryTM program for the transient stability study in power systems with wind turbine. The main goal is to make available means to use a dynamic simulation program in power systems, widely published, and utilize it as a tool that helps in programs results evaluations used for this intent. The process of simulations and analyses results starts after the models setting description phase. The results obtained by the DigSILENT PowerFactoryTM and ATP, program chosen to the validation also international recognized, are compared during this phase. The main tools and guide lines of PowerFactoryTM program use are presented here, directing these elements to the solution of the approached problem. For the simulation it is used a real system which it will be connected a wind farm. Two different technologies of wind turbines were implemented: doubly-fed induction generator with frequency converter, connecting the rotor to the stator and to the grid, and synchronous wind generator with frequency converter, interconnecting the generator to the grid. Besides presenting the basic conceptions of dynamic simulation, it is described the implemented control strategies and models of turbine and converters. The stability of the wind turbine interconnected to grid is analyzed in many operational conditions, resultant of diverse kinds of disturbances

Desenvolvimento de software para simulação de motores com dispositivos de partida baseada na integração do atp com o toprede

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior