Peer review of teaching practice and resources : exploring new spaces to embrace cultural change

The implementation of systematic peer review as a professional development activity, and as a support for educational design activities is under-utilised in many Australian higher education institutions. This case study reports on the first stages of planning and implementation of an institution-wide project to enhance teaching and learning quality at a remote and regional university, where one of the major strategies for improvement is peer review. Through a systematic process of staff engagement in peer review, within and from outside the organisation, a substantial change in flexible learning is envisaged. A mix of new and different learning spaces are to be used in the project, including blended learning spaces for academic development. This paper describes the research framework that will guide the peer review process and examines the early findings of the design-based research. Leadership, awareness raising and development of a supportive community of inquiry are seen as key components for successful implementation of peer review. In addition, unique contextual elements add to the complexity of designing for transformative change within such a relatively new organization.

Complete genomic sequence of a Rubus yellow net virus isolate and detection of genome-wide pararetrovirus-derived small RNAs

Rubus yellow net virus (RYNV) was cloned and sequenced from a red raspberry (Rubus idaeus L.) plant exhibiting symptoms of mosaic and mottling in the leaves. Its genomic sequence indicates that it is a distinct member of the genus Badnavirus, with 7932. bp and seven ORFs, the first three corresponding in size and location to the ORFs found in the type member Commelina yellow mottle virus. Bioinformatic analysis of the genomic sequence detected several features including nucleic acid binding motifs, multiple zinc finger-like sequences and domains associated with cellular signaling. Subsequent sequencing of the small RNAs (sRNAs) from RYNV-infected R. idaeus leaf tissue was used to determine any RYNV sequences targeted by RNA silencing and identified abundant virus-derived small RNAs (vsRNAs). The majority of the vsRNAs were 22-nt in length. We observed a highly uneven genome-wide distribution of vsRNAs with strong clustering to small defined regions distributed over both strands of the RYNV genome. Together, our data show that sequences of the aphid-transmitted pararetrovirus RYNV are targeted in red raspberry by the interfering RNA pathway, a predominant antiviral defense mechanism in plants. © 2013.

The complete nucleotide sequence of subterranean clover mottle virus

The complete nucleotide sequence of Subterranean clover mottle virus (SCMoV) genomic RNA has been determined. The SCMoV genome is 4,258 nucleotides in length. It shares most nucleotide and amino acid sequence identity with the genome of Lucerne transient streak virus (LTSV). SCMoV RNA encodes four overlapping open reading frames and has a genome organisation similar to that of Cocksfoot mottle virus (CfMV). ORF1 and ORF4 are predicted to encode single proteins. ORF2 is predicted to encode two proteins that are derived from a -1 translational frameshift between two overlapping reading frames (ORF2a and ORF2b). A search of amino acid databases did not find a significant match for ORF1 and the function of this protein remains unclear. ORF2a contains a motif typical of chymotrypsin-like serine proteases and ORF2b has motifs characteristically present in positive-stranded RNA-dependent RNA polymerases. ORF4 is likely to be expressed from a subgenomic RNA and encodes the viral coat protein. The ORF2a/ORF2b overlapping gene expression strategy used by SCMoV and CfMV is similar to that of the poleroviruses and differ from that of other published sobemoviruses. These results suggest that the sobemoviruses could now be divided into two distinct subgroups based on those that express the RNA-dependent RNA polymerase from a single, in-frame polyprotein, and those that express it via a -1 translational frameshifting mechanism.

Improving public spaces for young people : the contribution of participatory research

The objectives of this chapter are to examine the contribution of public spaces to the wellbeing of young people and how participatory action research can be used as a process tool for contextually responsive, collaborative, iterative and multi-method community level practice. The addition of a spatial frame to practice can open up unexpected alliances and opportunities for enhancing the wellbeing of people.

Understanding the implications of digital interactions on the design of public urban spaces

This study investigated the impact of digital networked social interactions on the design of public urban spaces. Urban informatics, social media, ubiquitous computing, and mobile technology offer great potential to urban planning, as tools of communication, community engagement, and placemaking. The study considers the function of public spaces as 'third places,' that is, social places that are familiar, comfortable, social and meaningful for everyday life outside the home and work. Libraries were chosen as the study's focus. The study produced findings and insights at the intersection of urban planning (place), cultural geography and urban sociology (people), and information communication technology (technology) – the triad of urban informatics.

Simulating cooperative systems applications : a new complete architecture

For a decade, embedded driving assistance systems were mainly dedicated to the management of short time events (lane departure, collision avoidance, collision mitigation). Recently a great number of projects have been focused on cooperative embedded devices in order to extend environment perception. Handling an extended perception range is important in order to provide enough information for both path planning and co-pilot algorithms which need to anticipate events. To carry out such applications, simulation has been widely used. Simulation is efficient to estimate the benefits of Cooperative Systems (CS) based on Inter-Vehicular Communications (IVC). This paper presents a new and modular architecture built with the SiVIC simulator and the RTMaps™ multi-sensors prototyping platform. A set of improvements, implemented in SiVIC, are introduced in order to take into account IVC modelling and vehicles’ control. These 2 aspects have been tuned with on-road measurements to improve the realism of the scenarios. The results obtained from a freeway emergency braking scenario are discussed.

Food in the city : urban food movements and the (re)imagining of urban spaces

Ethical food movements are growing in number throughout Australia. Amongst these diverse movements are urban agriculture initiatives, which articulate a multitude of social and environmental values. Yet, despite the long history of production and exchange of food in urban areas, planners (and others) often overlook its significance. To assist in addressing this oversight, we take the case study of Melbourne to examine the ways in which participants in urban agriculture are re-imagining urban spaces and the future of agriculture and food systems in Australia. We demonstrate that urban food advocates' politics and practices both challenge and resist the enclosure of urban spaces. This creates new frontiers that transgress social, political, ecological and economic boundaries and edges. These transgressions or counter-enclosures articulate new visions for secure and just food systems and, in so doing, offer insights to assist planners in ensuring Australian cities support socially just and environmentally responsible food systems.

Digital Literacy and the Spaces of Academic Discourse

Digital literacy poses a particular challenge to the research-led university. Although these universities are often at the forefront of introducing digital literacy initiatives—such as e-learning platforms, technological infrastructure, and digital repositories—these applications of digital literacy tend to be more instrumental or functional than critical or creative. Certainly, this clash of cultures between the instrumental/functional and the critical/analytical is at the heart of debates over the uses of digital literacy in higher education. However, this simple equation of political forces with instrumentality and the corresponding equation of the university with a tradition of reflective thought that brings criticism to bear on instrumentality elide the fact that this conflict is more deeply rooted within the academy. This essay argues that, in fact, much of the resistance to critical uses of digital literacy comes from within the institution of the university itself. That is, the university is bound up in a scriptural economy that prioritises the printed word and that reinforces its power by way of a normative, political, and spatialised academic discourse. It is this print-based scriptural economy—in which this essay must acknowledge its own complicity—that a critical approach to digital literacy threatens to disrupt or lay bare.

Complete and competent engineers : a coaching model to developing holistic graduates

The growing gap between engineering practice and engineering has been identified at the level of certain essential skills needed among practising engineers but not developed through the current education system. Coaching approach to learning and teaching has been proven to be an effective way to develop people in the workplace. A pilot coaching program is proposed to engineering students at Queensland University of Technology to enable holistic growth in order to better integrate them to the work force and society at large. The success measures and insights gained will be published on completion of the program. It is hoped that the outcomes of this study will better inform curriculum design and development in the engineering disciplines towards better transition between engineering education and engineering practice.

Investigating subspace distances in semantic spaces

Semantic space models of word meaning derived from co-occurrence statistics within a corpus of documents, such as the Hyperspace Analogous to Language (HAL) model, have been proposed in the past. While word similarity can be computed using these models, it is not clear how semantic spaces derived from different sets of documents can be compared. In this paper, we focus on this problem, and we revisit the proposal of using semantic subspace distance measurements [1]. In particular, we outline the research questions that still need to be addressed to investigate and validate these distance measures. Then, we describe our plans for future research.

Semantic spaces : measuring the distance between different subspaces

Semantic Space models, which provide a numerical representation of words’ meaning extracted from corpus of documents, have been formalized in terms of Hermitian operators over real valued Hilbert spaces by Bruza et al. [1]. The collapse of a word into a particular meaning has been investigated applying the notion of quantum collapse of superpositional states [2]. While the semantic association between words in a Semantic Space can be computed by means of the Minkowski distance [3] or the cosine of the angle between the vector representation of each pair of words, a new procedure is needed in order to establish relations between two or more Semantic Spaces. We address the question: how can the distance between different Semantic Spaces be computed? By representing each Semantic Space as a subspace of a more general Hilbert space, the relationship between Semantic Spaces can be computed by means of the subspace distance. Such distance needs to take into account the difference in the dimensions between subspaces. The availability of a distance for comparing different Semantic Subspaces would enable to achieve a deeper understanding about the geometry of Semantic Spaces which would possibly translate into better effectiveness in Information Retrieval tasks.

Urban knowledge and innovation spaces : concepts, conditions, and contexts

Innovation is one of the key determinants of growth in the globalised knowledge economy, and ‘urban knowledge and innovation spaces’ form the spatial foci for sustained innovation. This paper aims to explore concepts, conditions and contexts that substantiate the development of these spaces of innovation. The paper seeks to identify the foundational elements of knowledge- based urban development to outline the concept of urban knowledge and innovation spaces, and justify its meaning, unique characteristics and growing influence in the contemporary cities. It rationalises the relevance of the three underlying conditions—namely policy, place, and people— to better understand their contribution in the development of such spaces. This paper sheds light over the varied contexts shaping each urban knowledge and innovation space uniquely. The paper reveals the interplay between design and policies that is required for the creation of spaces of innovation that are economically strong, socially connected, spatially stimulating, and environmentally sustainable.

Contemporary public spaces in urban knowledge precincts : observations from Brisbane, Australia

The advanced era of knowledge-based urban development has led to an unprecedented increase in mobility of people and the subsequent growth in the new typology of agglomerated enclaves of knowledge such as urban knowledge precincts. A new role has been assigned to contemporary public spaces of these precincts to attract and retain the mobile knowledge workforce for long by creating a sense of place for them. This paper sheds light over the place making in the globalised knowledge economy world which develops a sense of permanence spatio-temporally to knowledge workers displaying a set of particular characteristics and simultaneously is process-dependent getting developed by the internal and external flows and contributing substantially in the development of the broader context it stands in relation with. The paper highlights the observations from Australia’s new world city Brisbane to outline the application of urban design as a tool to create and sustain this bipartite place making in urban knowledge precincts, which caters diverse range of social, cultural and democratic needs. It seeks to analyse the modified permeable typology of public spaces that makes it more viable and adaptive as per the changing needs of the contemporary globalised or in other words knowledge society. This research has taken an overall process-based approach reflecting how urban design is an assemblage of the encompassing processes that underlay the resultant place making. It explores how the permeable design typology of these contemporary precincts in Brisbane develops a progressive sense of place that makes them stimulating, effervescent and vibrant.

Harnessing the influence of reactive edges and defects of graphene substrates for achieving complete cycle of room-temperature molecular sensing

Molecular doping and detection are at the forefront of graphene research, a topic of great interest in physical and materials science. Molecules adsorb strongly on graphene, leading to a change in electrical conductivity at room temperature. However, a common impediment for practical applications reported by all studies to date is the excessively slow rate of desorption of important reactive gases such as ammonia and nitrogen dioxide. Annealing at high temperatures, or exposure to strong ultraviolet light under vacuum, is employed to facilitate desorption of these gases. In this article, the molecules adsorbed on graphene nanoflakes and on chemically derived graphene-nanomesh flakes are displaced rapidly at room temperature in air by the use of gaseous polar molecules such as water and ethanol. The mechanism for desorption is proposed to arise from the electrostatic forces exerted by the polar molecules, which decouples the overlap between substrate defect states, molecule states, and graphene states near the Fermi level. Using chemiresistors prepared from water-based dispersions of single-layer graphene on mesoporous alumina membranes, the study further shows that the edges of the graphene flakes (showing p-type responses to NO2 and NH3) and the edges of graphene nanomesh structures (showing n-type responses to NO2 and NH3) have enhanced sensitivity. The measured responses towards gases are comparable to or better than those which have been obtained using devices that are more sophisticated. The higher sensitivity and rapid regeneration of the sensor at room temperature provides a clear advancement towards practical molecule detection using graphene-based materials.