A novel concept of unidirectional bridgeless combined boost-buck converter for EV battery chargers

This paper presents a novel concept of unidirectional bridgeless combined boost-buck converter for electric vehicles (EVs) battery chargers. The proposed converter is composed by two power stages: an ac-dc front-end converter used to interface the power grid and the dc-link, and a dc-dc back-end converter used to interface the dc-link and the batteries. The ac-dc converter is a bridgeless boost-type converter and the dc-dc converter is an interleaved buck-type converter. The proposed converter operates with sinusoidal grid current and unitary power factor for all operating power levels. Along the paper is described in detail the proposed converter for EV battery chargers: the circuit topology, the different stages describing the principle of operation, the power control theory, and the current control strategy, for both converters. Along the paper are presented several simulation results for a maximum power of 3.5 kW.

Innovative method for the continuous monitoring of concrete viscoelastic properties since early ages: concept and pilot experiments

The experimental evaluation of viscoelastic properties of concrete is traditionally made upon creep tests that consist in the application of sustained loads either in compression or in tension. This kind of testing demands for specially devised rigs and requires careful monitoring of the evolution of strains, whereas assuring proper load constancy. The characterization of creep behaviour at early ages offers additional challenges due to the strong variations in viscoelastic behaviour of concrete during such stages, demanding for several testing ages to be assessed. The present research work aims to assist in reducing efforts for continuous assessment of viscoelastic properties of concrete at early ages, by application of a dynamic testing technique inspired in methodologies used in polymer science: Dynamic Mechanical Analyses. This paper briefly explains the principles of the proposed methodology and exhibits the first results obtained in a pilot application. The results are promising enough to encourage further developments.

Effect of variables on the thickness of an edible coating applied on frozen fish establishment of the concept of safe dipping time

Glazing is a technique used to retard fish deterioration during storage. This work focuses on the study of distinct variables (fish temperature, coating temperature, dipping time) that affect the thickness of edible coatings (water glazing and 1.5% chitosan) applied on frozen fish. Samples of frozen Atlantic salmon (Salmo salar) at -15, -20, and -25 °C were either glazed with water at 0.5, 1.5 or 2.5 °C or coated with 1.5% chitosan solution at 2.5, 5 or 8 °C, by dipping during 10 to 60 s. For both water and chitosan coatings, lowering the salmon and coating solution temperatures resulted in an increase of coating thickness. At the same conditions, higher thickness values were obtained when using chitosan (max. thickness of 1.41±0.05 mm) compared to water (max. thickness of 0.84±0.03 mm). Freezing temperature and crystallization heat were found to be lower for 1.5% chitosan solution than for water, thus favoring phase change. Salmon temperature profiles allowed determining, for different dipping conditions, whether the salmon temperature was within food safety standards to prevent the growth of pathogenic microorganisms. The concept of safe dipping time is proposed to define how long a frozen product can be dipped into a solution without the temperature raising to a point where it can constitute a hazard.

Emotional aspects of childhood career development: importance and future agenda

Childhood is a central period for career and social-emotional development. However, the literature covering childhood career development and the role of emotions in careers is scarce. In this article, we advocate for the consideration of emotions in childhood career development. Emotional aspects of children’s career exploration, key-figures and interests, as well as of childhood antecedents of lifelong career processes are presented. Relations between childhood emotion, behavior, functioning and learning are also presented. Conclusions center on a call for focused study of the role of emotion in childhood career development and how such an agenda will advance the literature.

Psychological intervention in Portuguese college students: effects of two career self-management seminars

This article describes the evaluation of a psychological intervention—the Career Self-Management Seminar, Version A, for undergraduate students, and Version B for postgraduate students—developed to support Portuguese college students in career exploration, goal setting, design and implementation of action plans, and decision-making. A total of 120 participants from CSMS-A (experimental group, n = 58; control group, n = 62) and 98 from CSMS-B (experimental group, n = 62; control group, n = 36) were assessed by the Career Exploration Survey according to a pretest and posttest plan. Results demonstrate a significant increase in most of the cognitive, behavioral, and affective career exploration dimensions among the CSMS-A and CSMS-B experimental groups.

Um modelo de programação inteira para a otimização da distribuição do serviço docente

Dissertação de mestrado em Engenharia Industrial

Career barriers influencing career success: A focus on academics’ perceptions and experiences

Purpose – Few research has addressed the factors that undermine people’s subjective perceptions of career success. Hence, the purpose of this paper is to further illuminate the issue of career barriers in perceptions of career success for a specific group of professionals: academics. Design/methodology/approach – This study adopts an interpretative-social constructionist methodology. Complementarily, it was employed a phenomenological method in data gathering and analysis – with the use of in-depth interviews and a theme analysis. The research was undertaken with a group of 87 Portuguese academics of both sexes and in different stages of their academic careers. Findings – The findings pinpoint the existence of multi-level barriers encountered by the academics when trying to succeed in their careers. The interviewees mentioned particularly the organizational-professional career barriers pertaining to three general themes: poor collegiality and workplace relationships; the lack of organizational support and employment precariousness; and the career progression standards and expectations. At the individual life cycle level the interviewees referred to the theme of finding balance; at the same time, the gender structure was also a theme mentioned as an important career barrier in career success, particularly by the women interviewed. Research limitations/implications – One of the limitations of this research is related to the impossibility of generalizability of its findings for the general population. Nevertheless, the researcher provides enough detail that grants the reader with the ability to judge of its similarity to other research contexts. Practical implications – This research highlights the role played by distinct career barriers for a specific professional group: academics. This has implications for higher education policy-makers and for human resources managers in higher education institutions. Originality/value – The current study extends the literature on career success by offering detailed anecdotal evidence on how negative work experiences might hinder career success. This research shows that to understand career barriers to success it is useful to consider multi-level factors: organizational-level factors (e.g. poor collegiality and workplace relationships); individual-level factors (e.g. life-cycle factors such as age/career stage); and structural-level factors (e.g. gender).

Study of the of the concept of community buildings and its importance for land use efficiency

Nowadays cities are facing several environmental problems due to the population migration to urban areas, which is causing urban sprawl. This way, it is very important to define solutions to improve Land Use Efficiency (LUE). This article proposes the use of community buildings features as a solution to increase land use efficiency. Community buildings consider the design of shared building spaces to reduce the floor area of buildings. This work tests the performance of some case-study buildings regarding LUE to analyse its possible pros and cons. A quantifiable method is used to assess buildingsâ LUE, which considers the number of occupants, the gross floor area, the functional area, the implantation area and the allotment area. Buildings with higher values for this index have reduced environmental impacts because they use less construction materials, produce less construction and demolition wastes and require less energy for building operation. The results showed that the use of community building features can increase Land Use Efficiency of buildings.

PillCam COLON 2© in Crohn's disease: A new concept of pan-enteric mucosal healing assessment

AIM To evaluate mucosal healing in patients with small bowel plus colonic Crohn's disease (CD) with a single non-invasive examination, by using PillCam COLON 2 (PCC2). METHODS Patients with non-stricturing nonpenetrating small bowel plus colonic CD in sustained corticosteroid-free remission were included. At diagnosis, patients had undergone ileocolonoscopy to identify active CD lesions, such as ulcers and erosions, and small bowel capsule endoscopy to assess the Lewis Score (LS). After = 1 year of follow-up, patients underwent entire gastrointestinal tract evaluation with PCC2. The primary endpoint was assessment of CD mucosal healing, defined as no active colonic CD lesions and LS < 135. RESULTS Twelve patients were included (7 male; mean age: 32 years), and mean follow-up was 38 mo. The majority of patients (83.3%) received immunosuppressive therapy. Three patients (25%) achieved mucosal healing in both the small bowel and the colon, while disease activity was limited to either the small bowel or the colon in 5 patients (42%). It was possible to observe the entire gastrointestinal tract in 10 of the 12 patients (83%) who underwent PCC2. CONCLUSION Only three patients in sustained corticosteroid-free clinical remission achieved mucosal healing in both the small bowel and the colon, highlighting the limitations of clinical assessment when stratifying disease activity, and the need for pan-enteric endoscopy to guide therapeutic modification.

Bioethanol production by Saccharomyces cerevisiae, Pichia stipitis and Zymomonas mobilis from delignified coconut fibre mature and lignin extraction according to biorefinery concept

In search to increase the offer of liquid, clean, renewable and sustainable energy in the world energy matrix, the use of lignocellulosic materials (LCMs) for bioethanol production arises as a valuable alternative. The objective of this work was to analyze and compare the performance of Saccharomyces cerevisiae, Pichia stipitis and Zymomonas mobilis in the production of bioethanol from coconut fibre mature (CFM) using different strategies: simultaneous saccharification and fermentation (SSF) and semi-simultaneous saccharification and fermentation (SSSF). The CFM was pretreated by hydrothermal pretreatment catalyzed with sodium hydroxide (HPCSH). The pretreated CFM was characterized by X-ray diffractometry and SEM, and the lignin recovered in the liquid phase by FTIR and TGA. After the HPCSH pretreatment (2.5% (v/v) sodium hydroxide at 180 °C for 30 min), the cellulose content was 56.44%, while the hemicellulose and lignin were reduced 69.04% and 89.13%, respectively. Following pretreatment, the obtained cellulosic fraction was submitted to SSF and SSSF. Pichia stipitis allowed for the highest ethanol yield 90.18% in SSSF, 91.17% and 91.03% were obtained with Saccharomyces cerevisiae and Zymomonas mobilis, respectively. It may be concluded that the selection of the most efficient microorganism for the obtention of high bioethanol production yields from cellulose pretreated by HPCSH depends on the operational strategy used and this pretreatment is an interesting alternative for add value of coconut fibre mature compounds (lignin, phenolics) being in accordance with the biorefinery concept.

Valorization of eucalyptus wood by glycerol-organosolv pretreatment within the biorefinery concept: an integrated and intensified approach

The efficient utilization of lignocellulosic biomass and the reduction of production cost are mandatory to attain a cost-effective lignocellulose-to-ethanol process. The selection of suitable pretreatment that allows an effective fractionation of biomass and the use of pretreated material at high-solid loadings on saccharification and fermentation (SSF) processes are considered promising strategies for that purpose. Eucalyptus globulus wood was fractionated by organosolv process at 200 C for 69 min using 56% of glycerol-water. A 99% of cellulose remained in pretreated biomass and 65% of lignin was solubilized. Precipitated lignin was characterized for chemical composition and thermal behavior, showing similar features to commercial lignin. In order to produce lignocellulosic ethanol at high-gravity, a full factory design was carried to assess the liquid to solid ratio (3e9 g/g) and enzyme to solid ratio (8e16 FPU/g) on SSF of delignified Eucalyptus. High ethanol concentration (94 g/L) corresponding to 77% of conversion at 16FPU/g and LSR ¼ 3 g/g using an industrial and thermotolerant Saccharomyces cerevisiae strain was successfully produced from pretreated biomass. Process integration of a suitable pretreatment, which allows for whole biomass valorization, with intensified saccharification-fermentation stages was shown to be feasible strategy for the co-production of high ethanol titers, oligosaccharides and lignin paving the way for cost-effective Eucalyptus biorefinery.

Relatório de atividade profissional

Relatório de atividade profissional de mestrado em Ciências – Formação Contínua de Professores (área de especialização em Física e Química)

Employment, turnover and career progress

The severe economic downturn that followed the Global Financial Crisis of 2007 was accompanied by major fluctuations in the labour market. During the Great Recession the rate of job destruction was such that, by 2013, active population was at levels of 1999; employment levels were at an historical minimum; and the unemployment rate soared to 17,5%. This chapter inspects the dynamics behind the aggregate fl uctuations in the labour market and studies the determinants of mobility within (promotions) and between fi rms, and whether these have changed during crisis, using Portuguese (LEED) data. During crisis women became more likely to make between- rm moves with short gaps of unemployment and less likely to find a new job after a long gap or to make a job-to-non-employment transition. More educated workers are less likely to experience between fi rm job mobility, both before and during crisis, and became less likely to make job-to-non-employment transitions during crisis. Young workers are the group that most suffered from crisis: they became less likely to make job-to-job transitions and their hazard of experiencing a transition into unemployment shoot up.

The application of the equivalent annulus width concept in thermal diffusion separations

The equivalent annulus width concept is used to characterize a small commercial thermogravitational hermal diffusion column and its validity checked experimentally by separating batchwise in the column mixtures of n-heptanebenzene with different initial concentrations. The equation of Ruppell and Coull was used to analyse the data in the short separation times range and determine the equivalent annulus width. Good agreement was obtained between the experimental and predicted time-separation curves when using the equivalent annulus width value and on averaged value of the thermal diffusion constant. A new method is presented for the simultaneous determination of the equivalent annulus width and the thermal diffusion constant of a binary mixture from a single set of experimental data.

El valor razonable como concepto vinculado a la pertinencia del valor. Fair value as a concept related to value relevance.

IDENTIFICACIÓN Y CARACTERIZACIÓN DEL PROBLEMA - HIPÓTESIS Según la NIC 39, el valor razonable es la cantidad por la que puede ser intercambiado un activo o cancelado un pasivo entre un comprador y un vendedor interesados y debidamente informados, en condiciones de independencia mutua. La definición del FASB (SFAC 7) es muy similar, y define el valor razonable como el monto mediante el que un activo podría ser enajenado en una transacción entre partes independientes, dispuestas a realizar la operación en situaciones diferentes a la de una liquidación o a la de una venta forzada. Puede apreciarse que esta definición de valor razonable es limitada porque, a excepción de escenarios que se correspondan con mercados perfectos y completos, el concepto puede abarcar valores de entrada, valores de salida y valores en uso, los cuales pueden ser muy diferentes (Beaver, 1987). El valor de entrada es el valor de adquisición o de reemplazo, el valor de salida es el precio al cual un activo puede ser vendido o liquidado, y el valor en uso es el valor incremental de una empresa atribuible a un activo (se correspondería con el valor presente mencionado anteriormente). Dado que el IASB y la FASB se ocupan de la valuación de activos que una empresa posee, y no de activos que serán adquiridos en un futuro, su definición de valor razonable debería ser interpretada desde la perspectiva del vendedor. Por lo tanto, el concepto de valor razonable que manejan el IASB y la FASB se asemeja a un valor de salida, tal como lo propusieron Chambers y Stirling hace bastantes años atrás.Planteado esto, lo que tratará de dilucidar este proyecto de investigación es si este concepto de valor razonable es realmente novedoso o es una simple regresión a los valores corrientes de salida defendidos por los autores de la década del setenta. OBJETIVOS GENERALES Y ESPECÍFICOS General Analizar si el concepto “valor razonable” tal como es definido por la normativa actual se corresponde con una definición novedosa o es una adaptación/modificación/regresión de conceptos ya existentes (valores corrientes de salida). Específicos Revisar la literatura específica desde el punto de vista de la teoría contable y las normas de las que dispone la profesión referidas a los siguientes aspectos: a) Valores corrientes b) Valor razonable MATERIALES Y MÉTODOS El análisis que se llevará a cabo comprenderá dos aspectos. El primero consiste en la revisión de la doctrina contable. Para ello se analizará bibliografía significativa y trabajos de eventos académicos relacionados con el valor razonable. En segundo término se revisará la normativa profesional a nivel nacional e internacional. Después de concluido con los pasos anteriores se analizará la novedad del concepto valor razonable y su semejanza con el valor corriente de salida planteado por los autores de la década del setenta. IMPORTANCIA DEL PROYECTO – IMPACTO Se pretende revisar si el concepto valor razonable planteado por la normativa actual resulta realmente novedoso o es una adaptación de viejos conceptos planteados en la década del setenta del siglo pasado. El proyecto resulta importante porque es un tema no desarrollado en la literatura, ni planteado en congresos. Se estima lograr material de publicación y presentación en eventos académicos. According to the NIC 39, fair value is the quantity for the one that can be exchanged an asset or cancelled a liability between a buyer and a seller interested and due informed, in conditions of mutual independence. The definition of the FASB (SFAC 7) is very similar, and defines fair value as the amount by means of which an assets might be alienated in a transaction between independent parts, ready to realize the operation in situations different from that of a liquidation or to that of a forced sale. This definition of reasonable value is limited because, with the exception of scenes that fit with perfect and complete markets, the concept can include values of entry, values of exit and values in use, which can be very different (Beaver, 1987). The value of entry is the value of acquisition or of replacement, the value of exit is the price to which an asset can be sold or liquidated, and the value in use is the incremental value of a company attributable to an asset. Provided that the IASB and the FASB deal with the appraisal of assets that a company possesses, and not of assets that will be acquired in a future, this definition of fair value should be interpreted from the perspective of the seller. Therefore, the concept of reasonable value that they handle the IASB and the FASB is alike a value of exit, as Chambers and Stirling proposed it enough years ago behind. We will review if the concept of "fair value" is really new or if it is an adaptation of old concepts.