Dislocation after total hip replacement: there is no such thing as a safe zone for socket placement with the posterior approach

Introduction Malorientation of the socket contributes to instability after hip arthroplasty but the optimal orientation of the cup in relation to the pelvis has not been unequivocally described. Large radiological studies are few and problems occur with film standardisation, measurement methodology used and alternative definitions of describing acetabular orientation. Methods A cohort of 1,578 patients from a single institution is studied where all patient data was collected prospectively. Risk factors for patients undergoing surgery are analysed. Radiological data was compared between a series of non-dislocating hips and dislocating cases matched 2:1 by operation type, age and diagnosis. Results The overall dislocation rate for all 1,578 cases was 3.23% but the rate varied according to the type of surgery performed. The rate in uncomplicated primary cases was 2.4% which increased to 9.3% for second stage implantation for a two stage procedure for infection. There was no significant difference in the variability of the dislocating and non-dislocating groups for either inclination (p = 0.393) or anteversion (p = 0.661). Conclusions A “safe zone” for socket orientation to avoid dislocation could not be defined. The cause of dislocation is multifactorial, re-establishing the anatomic centre of rotation, balancing soft tissues and avoidance of impingement around the hip are important considerations.

Implementation of placement and routing algorithms for computer aided design of printed circuit boards

The Printed Circuit Board (PCB) layout design is one of the most important and time consuming phases during equipment design process in all electronic industries. This paper is concerned with the development and implementation of a computer aided PCB design package. A set of programs which operate on a description of the circuit supplied by the user in the form of a data file and subsequently design the layout of a double-sided PCB has been developed. The algorithms used for the design of the PCB optimise the board area and the length of copper tracks used for the interconnections. The output of the package is the layout drawing of the PCB, drawn on a CALCOMP hard copy plotter and a Tektronix 4012 storage graphics display terminal. The routing density (the board area required for one component) achieved by this package is typically 0.8 sq. inch per IC. The package is implemented on a DEC 1090 system in Pascal and FORTRAN and SIGN(1) graphics package is used for display generation.

Star Camera Calibration Combined with Independent Spacecraft Attitude Determination

A methodology for determining spacecraft attitude and autonomously calibrating star camera, both independent of each other, is presented in this paper. Unlike most of the attitude determination algorithms where attitude of the satellite depend on the camera calibrating parameters (like principal point offset, focal length etc.), the proposed method has the advantage of computing spacecraft attitude independently of camera calibrating parameters except lens distortion. In the proposed method both attitude estimation and star camera calibration is done together independent of each other by directly utilizing the star coordinate in image plane and corresponding star vector in inertial coordinate frame. Satellite attitude, camera principal point offset, focal length (in pixel), lens distortion coefficient are found by a simple two step method. In the first step, all parameters (except lens distortion) are estimated using a closed-form solution based on a distortion free camera model. In the second step lens distortion coefficient is estimated by linear least squares method using the solution of the first step to be used in the camera model that incorporates distortion. These steps are applied in an iterative manner to refine the estimated parameters. The whole procedure is faster enough for onboard implementation.

Who really ate the fruit? A novel approach to camera trapping for quantifying frugivory by ruminants

Tropical forest ruminants disperse several plants; yet, their effectiveness as seed dispersers is not systematically quantified. Information on frequency and extent of frugivory by ruminants is lacking. Techniques such as tree watches or fruit traps adapted from avian frugivore studies are not suitable to study terrestrial frugivores, and conventional camera traps provide little quantitative information. We used a novel time-delay camera-trap technique to assess the effectiveness of ruminants as seed dispersers for Phyllanthus emblica at Mudumalai, southern India. After being triggered by animal movement, cameras were programmed to take pictures every 2 min for the next 6 min, yielding a sequence of four pictures. Actual frugivores were differentiated from mere visitors, who did not consume fruit, by comparing the number of fruit remaining across the time-delay photograph sequence. During a 2-year study using this technique, we found that six terrestrial mammals consumed fallen P. emblica fruit. Additionally, seven mammals and one bird species visited fruiting trees but did not consume fallen fruit. Two ruminants, the Indian chevrotain Moschiola indica and chital Axis axis, were P. emblica's most frequent frugivores and they accounted for over 95% of fruit removal, while murid rodents accounted for less than 1%. Plants like P. emblica that are dispersed mainly by large mammalian frugivores are likely to have limited ability to migrate across fragmented landscapes in response to rapidly changing climates. We hope that more quantitative information on ruminant frugivory will become available with a wider application of our time-delay camera-trap technique.

The influence of the elements of procedural justice and speed camera enforcement on young novice driver self-reported speeding

Road policing is an important tool used to modify road user behaviour. While other theories, such as deterrence theory, are significant in road policing, there may be a role for using procedural justice as a framework to improve outcomes in common police citizen interactions such as traffic law enforcement. This study, using a sample of 237 young novice drivers, considered how the four elements of procedural justice (voice, neutrality, respect and trustworthiness) were perceived in relation to two forms of speed enforcement: point-to-point (or average) speed and mobile speed cameras. Only neutrality was related to both speed camera types suggesting that it may be possible to influence behaviour by emphasising one or more elements, rather than using all components of procedural justice. This study is important as it indicates that including at least some elements of procedural justice in more automated policing encounters can encourage citizen compliance.

Block-based feature detection and matching for mosaicing of camera-captured document images

In this paper, we present a new feature-based approach for mosaicing of camera-captured document images. A novel block-based scheme is employed to ensure that corners can be reliably detected over a wide range of images. 2-D discrete cosine transform is computed for image blocks defined around each of the detected corners and a small subset of the coefficients is used as a feature vector A 2-pass feature matching is performed to establish point correspondences from which the homography relating the input images could be computed. The algorithm is tested on a number of complex document images casually taken from a hand-held camera yielding convincing results.

Carer perspectives of factors affecting placement trajectories of children in out-of-home care

Carers are at the frontline working with children in the care of the child protection system. This paper reports carer's views about key factors influencing the placement trajectories of children and young people living in out-of-home care in Queensland, Australia. The study sample included 21 foster and kinship carers with a minimum two-year experience in the carer role. Study data were from semi-structured telephone interviews in which carers shared their experiences of the factors impacting upon placement stability and placement movement. Carers' responses were analysed thematically. Data analysis yielded an overarching theme regarding placement trajectory: Carer engagement, and its three sub-themes; with the child; with the child protection system; and, with the caring role. Findings suggested that carer engagement and ‘fit’ are complex constructs that play critical influential roles in placement outcomes (stability or movement) for individual children in out-of-home care. It is argued that practice needs to be better grounded in these relational dynamics, and better aligned concerning the power differentials that exist.

Asking the critical questions: An evaluation of social work students' experiences in an international placement

Preparing social work students for the demands of changing social environments and to promote student mobility and interest in overseas employment opportunities have resulted in an increasing demand for international social work placements. The literature describes numerous examples of social work programmes that offer a wide variety of international placements. However, research about the actual benefit of undertaking an overseas placement is scant with limited empirical evidence on the profile of students participating, their experience of the tasks offered, the supervisory practice and the outcomes for students' professional learning and career. This study contributes to the existing body of literature by exploring the relevance of international field placements for students and is unique in that it draws its sample from students who have graduated so provides a distinctive perspective in which to compare their international placement with their other placement/s as well as evaluating what were the benefits and drawbacks for them in terms of their careers, employment opportunities and current professional practice.

The inside story: A survey of social work students' supervision and learning opportunities on placement

Practice learning accounts for half of the content of the bachelor of social work degree course requirements in Northern Ireland in their field education programmes and share a professional and ethical responsibility with practice teachers to provide appropriate learning environments to prepare students as competent and professional practitioners. The accreditation standards for practice learning require the placement to provide students with regular supervision and exposure to a range of learning strategies, but there is little research that actually identifies the types of placements offering this learning and the key activities provided. This paper builds on an Australian study and surveys social work students in two programmes in Northern Ireland about their exposure to a range of learning activities, how frequently they were provided and how it compares to what is required by the Northern Ireland practice standards. The results indicated that, although most students were satisfied with the supervision and support they received during their placement, the frequency of supervision and type of learning activities varied according to different settings, year levels and who provided the learning opportunities.

Making the Most of Field Placement [3rd Ed.]

Overview Learn how to get the most from your placements with the aid of this user-friendly text. Making the Most of Field Placement offers a practice-based approach to teaching and learning during placement experiences. Written for both students and their supervisors, it follows the various stages of a placement from planning through to evaluation. The core practice issues and ideas that it discusses can be used for a wide range of fields including social work, welfare work, disability work, youth work, community work and other human services. Readers can follow through the chapters as a guide as the placement progresses or select specific chapters and exercises to enhance specific stages of the placement. Numerous examples, checklists and exercises provide practical ideas that help students and supervisors to positively engage with each stage of the field placement process.

Field placement and the impact of financial stress on social work and human services students

While significant research has been undertaken exploring the pedagogical benefits of undertaking lengthy social work and human services field placements, there has been very little consideration regarding the potential financial stress involved for students. This study has addressed this knowledge gap. Research was conducted in 2014 using quantitative and qualitative methods with students, academic and professional staff from six Queensland Universities. The findings show a significant relationship between unpaid placements and financial hardship creating considerable stress for students and at times a compromised learning experience whilst on placement. The limited flexibility in the requirements of professional bodies and universities for how placements are undertaken has been identified as a key contributor to financial hardship. Addressing the complexities inherent in this issue requires a collaborative effort from multiple stakeholders and should not be regarded as a problem for students to endure and manage.

Student satisfaction with models of field placement supervision

Field placements provide social work students with the opportunity to integrate their classroom learning with the knowledge and skills used in various human service programs. The supervision structure that has most commonly been used is the intensive one-to-one, clinical teaching model. However, this model is being challenged by significant changes in educational and industry sectors, which have led to an increased use of alternative fieldwork structures and supervision arrangements, including task supervision, group supervision, external supervision, and shared supervisory arrangements. This study focuses on identifying models of supervision and student satisfaction with their learning experiences and the supervision received on placement. The study analysed responses to a questionnaire administered to 263 undergraduate social work students enrolled in three different campuses in Australia after they had completed their first or final field placement. The study identified that just over half of the placements used the traditional one student to one social work supervisor model. A number of “emerging” models were also identified, where two or more social workers were involved in the professional supervision of the student. High levels of dissatisfaction were reported by those students who received external social work supervision. Results suggest that students are more satisfied across all aspects of the placement where there is a strong on-site social work presence.

Student satisfaction with models of field placement supervision

Field placements provide social work students with the opportunity to integrate their classroom learning with the knowledge and skills used in various human service programs. The supervision structure that has most commonly been used is the intensive one-to-one, clinical teaching model. However, this model is being challenged by significant changes in educational and industry sectors, which have led to an increased use of alternative fieldwork structures and supervision arrangements, including task supervision, group supervision, external supervision, and shared supervisory arrangements. This study focuses on identifying models of supervision and student satisfaction with their learning experiences and the supervision received on placement. The study analysed responses to a questionnaire administered to 263 undergraduate social work students enrolled in three different campuses in Australia after they had completed their first or final field placement. The study identified that just over half of the placements used the traditional one student to one social work supervisor model. A number of “emerging” models were also identified, where two or more social workers were involved in the professional supervision of the student. High levels of dissatisfaction were reported by those students who received external social work supervision. Results suggest that students are more satisfied across all aspects of the placement where there is a strong on-site social work presence.

A low temperature Weissenberg camera

Details of the design and operation of a Weissenberg camera suitable for x-ray investigations between -180°c and 200°c are presented. The camera employs a novel arrangement of spur and bevel gears to couple the goniometer spindle to the worm rod which controls the range of oscillation. The entire drive system and the goniometer assembly are mounted on a support which permits the insertion or removal of a cylindrical cassette from the gear-box side without disturbing the cooling assembly and the layer-line screen. The cassette can also be inserted from the opposite side. The specimen can be cooled either directly by a stream of liquid air or by the cold gas from its evaporation. Condensation of moisture at low temperatures is prevented by heating the layer-line tubes internally.