Estudio del amortiguamiento por fricción seca en aislantes antivibratorios de cable

Las vibraciones son un fenómeno que produce efectos negativos a estructuras, maquinaria y personas, y el aislamiento vibratorio es uno de los métodos de control más utilizado para erradicar sus consecuencias.

Valoración financiera de intangibles en las empresas de televisión por cable.

En el plan de Expansión de la empresa Newels, se identificó la necesidad de realizar una investigación enfocada a recopilar información relacionada a las valoraciones técnicas, procesos o herramientas que el personal estratégico y clave de la compañía tiene en consideración para tomar la decisión de invertir en la adquisición de activos intangibles bajo la modalidad de cuotas de mercado como un requerimiento de la gerencia para realizar la ejecución o no de un proyecto de inversión. La investigación se dirigió al proyecto de inversión para la adquisición de una cuota del mercado de televisión por cable en El Salvador, representado por 1,200 clientes suscriptores en el Departamento de La Unión, los cuales pertenecían a la empresa Multichannel. Bajo este contexto, se desarrolló la investigación en forma descriptiva y explicativa, a través de cuestionarios, con lo cual se realizó un análisis del objeto de estudio, que sirvió de base para la elaboración de cálculos matemáticos. Se utilizaron los métodos de valoración financiera (Flujo Neto de Caja Descontado, el Valor Actual Neto, Tasa Interna de Retorno, el Período de Recuperación, entre otros) analizando el valor de la inversión inicial, así como también los costos asociados para mantener y mejorar el servicio de cable prestado a los clientes, y los beneficios económicos esperados, para una proyección de cinco años (2009-2013) considerando una tasa mínima atractiva de retorno dada por la compañía. Con los resultados obtenidos, se logró determinar que el proyecto es rentable por lo cual se recomendó su ejecución.El presente trabajo de investigación, puede ser utilizado como una herramienta técnica para el personal involucrado en la toma de decisiones en cuanto a llevar a cabo proyectos de inversión en este tipo de activos.

Use of Fiber Reinforced Polymer Composite Cable for Post-tensioning Application

Corrosion of steel tendons is a major problem for post-tensioned concrete, especially because corrosion of the steel strands is often hard to detect inside grouted ducts. Non-metallic tendons can serve as an alternative material to steel for post-tensioning applications. Carbon fiber reinforced polymer (CFRP), given its higher strength and elastic modulus, as well as excellent durability and fatigue strength, is the most practical option for post-tensioning applications. The primary objective of this research project was to assess the feasibility of the use of innovative carbon fiber reinforced polymer (CFRP) tendons and to develop guidelines for CFRP in post-tensioned bridge applications, including segmental bridges and pier caps. An experimental investigation and a numerical simulation were conducted to compare the performance of a scaled segmental bridge model, post-tensioned with two types of carbon fiber strands and steel strands. The model was tested at different prestress levels and at different loading configurations. While the study confirms feasibility of both types of carbon fiber strands for segmental bridge applications, and their similar serviceability behavior, strands with higher elastic modulus could improve structural performance and minimize displacements beyond service loads. As the second component of the project, a side-by-side comparison of two types of carbon fiber strands against steel strands was conducted in a scaled pier cap model. Two different strand arrangements were used for post-tensioning, with eight and six strands, respectively representing an over-design and a slight under-design relative to the factored demand. The model was tested under service and factored loads. The investigation confirmed the feasibility of using carbon fiber strands in unbonded post-tensioning of pier caps. Considering both serviceability and overload conditions, the general performance of the pier cap model was deemed acceptable using either type of carbon fiber strands and quite comparable to that of steel strands. In another component of this research, creep stress tests were conducted with carbon fiber composite cable (CFCC). The anchorages for all the specimens were prepared using a commercially available expansive grout. Specimens withstood 95% of the guaranteed capacity provided by the manufacturer for a period of five months, without any sign of rupture.

Dynamics of undeactuated cable-driven parallel robots

This thesis focuses on the dynamics of underactuated cable-driven parallel robots (UACDPRs), including various aspects of robotic theory and practice, such as workspace computation, parameter identification, and trajectory planning. After a brief introduction to CDPRs, UACDPR kinematic and dynamic models are analyzed, under the relevant assumption of inextensible cables. The free oscillatory motion of the end-effector (EE), which is a unique feature of underactuated mechanisms, is studied in detail, from both a kinematic and a dynamic perspective. The free (small) oscillations of the EE around equilibria are proved to be harmonic and the corresponding natural oscillation frequencies are analytically computed. UACDPR workspace computation and analysis are then performed. A new performance index is proposed for the analysis of the influence of actuator errors on cable tensions around equilibrium configurations, and a new type of workspace, called tension-error-insensitive, is defined as the set of poses that a UACDPR EE can statically attain even in presence of actuation errors, while preserving tensions between assigned (positive) bounds. EE free oscillations are then employed to conceive a novel procedure aimed at identifying the EE inertial parameters. This approach does not require the use of force or torque measurements. Moreover, a self-calibration procedure for the experimental determination of UACDPR initial cable lengths is developed, which consequently enables the robot to automatically infer the EE initial pose at machine start-up. Lastly, trajectory planning of UACDPRs is investigated. Two alternative methods are proposed, which aim at (i) reducing EE oscillations even when model parameters are uncertain or (ii) eliminate EE oscillations in case model parameters are perfectly known. EE oscillations are reduced in real-time by dynamically scaling a nominal trajectory and filtering it with an input shaper, whereas they can be eliminated if an off-line trajectory is computed that accounts for the system internal dynamics.

Optimal pose selection for the calibration of an overconstrained Cable-Driven Parallel Robot

In this project an optimal pose selection method for the calibration of an overconstrained Cable-Driven Parallel robot is presented. This manipulator belongs to a subcategory of parallel robots, where the classic rigid "legs" are replaced by cables. Cables are flexible elements that bring advantages and disadvantages to the robot modeling. For this reason, there are many open research issues, and the calibration of geometric parameters is one of them. The identification of the geometry of a robot, in particular, is usually called Kinematic Calibration. Many methods have been proposed in the past years for the solution of the latter problem. Although these methods are based on calibration using different kinematic models, when the robot’s geometry becomes more complex, their robustness and reliability decrease. This fact makes the selection of the calibration poses more complicated. The position and the orientation of the endeffector in the workspace become important in terms of selection. Thus, in general, it is necessary to evaluate the robustness of the chosen calibration method, by means, for example, of a parameter such as the observability index. In fact, it is known from the theory, that the maximization of the above mentioned index identifies the best choice of calibration poses, and consequently, using this pose set may improve the calibration process. The objective of this thesis is to analyze optimization algorithms which aim to calculate an optimal choice of poses both in quantitative and qualitative terms. Quantitatively, because it is of fundamental importance to understand how many poses are needed. Not necessarily a greater number of poses leads to a better result. Qualitatively, because it is useful to understand if the selected combination of poses actually gives additional information in the process of the identification of the parameters.

Direct Kinematics of Underactuated Cable-Driven Parallel Robots: Sensitivity to Redundant Measurements

Underactuated cable-driven parallel robots (UACDPRs) shift a 6-degree-of-freedom end-effector (EE) with fewer than 6 cables. This thesis proposes a new automatic calibration technique that is applicable for under-actuated cable-driven parallel robots. The purpose of this work is to develop a method that uses free motion as an exciting trajectory for the acquisition of calibration data. The key point of this approach is to find a relationship between the unknown parameters to be calibrated (the lengths of the cables) and the parameters that could be measured by sensors (the swivel pulley angles measured by the encoders and roll-and-pitch angles measured by inclinometers on the platform). The equations involved are the geometrical-closure equations and the finite-difference velocity equations, solved using the least-squares algorithm. Simulations are performed on a parallel robot driven by 4 cables for validation. The final purpose of the calibration method is, still, the determination of the platform initial pose. As a consequence of underactuation, the EE is underconstrained and, for assigned cable lengths, the EE pose cannot be obtained by means of forward kinematics only. Hence, a direct-kinematics algorithm for a 4-cable UACDPR using redundant sensor measurements is proposed. The proposed method measures two orientation parameters of the EE besides cable lengths, in order to determine the other four pose variables, namely 3 position coordinates and one additional orientation parameter. Then, we study the performance of the direct-kinematics algorithm through the computation of the sensitivity of the direct-kinematics solution to measurement errors. Furthermore, position and orientation error upper limits are computed for bounded cable lengths errors resulting from the calibration procedure, and roll and pitch angles errors which are due to inclinometer inaccuracies.

Models for reliability estimation of HVDC cable systems

The work carried out in this thesis aims at: - studying – in both simulative and experimental methods – the effect of electrical transients (i.e., Voltage Polarity Reversals VPRs, Temporary OverVoltages TOVs, and Superimposed Switching Impulses SSIs) on the aging phenomena in HVDC extruded cable insulations. Dielectric spectroscopy, conductivity measurements, Fourier Transform Infra-Red FTIR spectroscopy, and space charge measurements show variation in the insulating properties of the aged Cross-Linked Polyethylene XLPE specimens compared to non-aged ones. Scission in XLPE bonds and formation of aging chemical bonds is also noticed in aged insulations due to possible oxidation reactions. The aged materials show more ability to accumulate space charges compared to non-aged ones. An increase in both DC electrical conductivity and imaginary permittivity has been also noticed. - The development of life-based geometric design of HVDC cables in a detailed parametric analysis of all parameters that affect the design. Furthermore, the effect of both electrical and thermal transients on the design is also investigated. - The intrinsic thermal instability in HVDC cables and the effect of insulation characteristics on the thermal stability using a temperature and field iterative loop (using numerical methods – Finite Difference Method FDM). The dielectric loss coefficient is also calculated for DC cables and found to be less than that in AC cables. This emphasizes that the intrinsic thermal instability is critical in HVDC cables. - Fitting electrical conductivity models to the experimental measurements using both models found in the literature and modified models to find the best fit by considering the synergistic effect between field and temperature coefficients of electrical conductivity.

Mechanical design and hybrid control strategies for overconstrained cable-driven parallel robots

Cable-driven parallel robots offer significant advantages in terms of workspace dimensions and payload capability. They are attractive for many industrial tasks to be performed on a large scale, such as handling and manufacturing, without a substantial increase in costs and mechanical complexity with respect to a small-scale application. However, since cables can only sustain tensile stresses, cable tensions must be kept within positive limits during the end-effector motion. This problem can be managed by overconstraining the end-effector and controlling cable tensions. Tension control is typically achieved by mounting a load sensor on all cables, and using specific control algorithms to avoid cable slackness or breakage while the end-effector is controlled in a desired position. These algorithms require multiple cascade control loops and they can be complex and computationally demanding. To simplify the control of overconstrained cable-driven parallel robots, this Thesis proposes suitable mechanical design and hybrid control strategies. It is shown how a convenient design of the cable guidance system allows kinematic modeling to be simplified, without introducing geometric approximations. This guidance system employs swiveling pulleys equipped with position and tension sensors and provides a parallelogram arrangement of cables. Furthermore, a hybrid force/position control in the robot joint space is adopted. According to this strategy, a particular set of cables is chosen to be tension-controlled, whereas the other cables are length-controlled. The force-controlled cables are selected based on the computation of a novel index called force-distribution sensitivity to cable-tension errors. This index aims to evaluate the maximum expected cable-tension error in the length-controlled cables if a unit tension error is committed in the force-controlled cables. In practice, the computation of the force-distribution sensitivity allows determining which cables are best to be force-controlled, to ensure the lowest error in the overall force distribution when a hybrid force/position joint-space strategy is used.

Feedback control of underactuated cable-driven parallel robots

In this work an Underactuated Cable-Driven Parallel Robot (UACDPR) that operates in the three dimensional Euclidean space is considered. The End-Effector has 6 degrees of freedom and is actuated by 4 cables, therefore from a mechanical point of view the robot is defined underconstrained. However, considering only three controlled pose variables, the degree of redundancy for the control theory can be considered one. The aim of this thesis is to design a feedback controller for a point-to-point motion that satisfies the transient requirements, and is capable of reducing oscillations that derive from the reduced number of constraints. A force control is chosen for the positioning of the End-Effector, and error with respect to the reference is computed through data measure of several sensors (load cells, encoders and inclinometers) such as cable lengths, tension and orientation of the platform. In order to express the relation between pose and cable tension, the inverse model is derived from the kinematic and dynamic model of the parallel robot. The intrinsic non-linear nature of UACDPRs systems introduces an additional level of complexity in the development of the controller, as a result the control law is composed by a partial feedback linearization, and damping injection to reduce orientation instability. The fourth cable allows to satisfy a further tension distribution constraint, ensuring positive tension during all the instants of motion. Then simulations with different initial conditions are presented in order to optimize control parameters, and lastly an experimental validation of the model is carried out, the results are analysed and limits of the presented approach are defined.

Analise do desenvolvimento das praticas urbanas de lazer relacionadas a produção cultural no periodo nacional-desenvolvimentista a globalização atraves da Teoria da Ação Comunicativa

Universidade Estadual de Campinas . Faculdade de Educação Física

The natural force density method for the shape finding of taut structures

This work presents, with the aid of the natural approach, an extension of the force density method for the initial shape finding of cable and membrane structures, which leads to the solution of a system of linear equations. This method, here called the natural force density method, preserves the linearity which characterizes the original force density method. At the same time, it overcomes the difficulties that the original procedure presents to cope with irregular triangular finite element meshes. Furthermore, if this method is applied iteratively in the lines prescribed herewith, it leads to a viable initial configuration with a uniform, isotropic plane Cauchy stress state. This means that a minimal surface for the membrane can be achieved through a succession of equilibrated configurations. Several numerical examples illustrate the simplicity and robustness of the method. (C) 2008 Elsevier B.V. All rights reserved.

Electronic scraps - Recovering of valuable materials from parallel wire cables

Every year, the number of discarded electro-electronic products is increasing. For this reason recycling is needed, to avoid wasting non-renewable natural resources. The objective of this work is to study the recycling of materials from parallel wire cable through Unit operations of mineral processing. Parallel wire cables are basically composed of polymer and copper. The following unit operations were tested: grinding, size classification, dense medium separation, electrostatic separation, scrubbing, panning, and elutriation. It was observed that the operations used obtained copper and PVC concentrates with a low degree of cross contamination. It was Concluded that total liberation of the materials was accomplished after grinding to less than 3 mm, using a cage mill. Separation using panning and elutriation presented the best results in terms of recovery and cross contamination. (C) 2007 Elsevier Ltd. All rights reserved.

A review of the Apocreadiidae Skrjabin, 1942 (Trematoda : Digenea) and description of Australian species

The Apocreadiidae is reviewed and is considered to include genera recognised previously within the families Apocreadiidae, Homalometridae, Schistorchiidae, Sphincterostomatidae and Trematobrienidae. Key features of the family are extensive vitelline follicles, eye-spot pigment dispersed in forebody, I-shaped excretory vesicle, no cirrus-sac and genital pore opening immediately anterior to the ventral sucker (usually) or immediately posterior to it (Postporus Manter, 1949). Three subfamilies and 18 genera are recognised within the Apocreadiidae. The Apocreadiinae comprises Homalometron Stafford, 1904 (new syn. Barbulostomum Ramsey, 1965), Callohelmis n. g., Choanodera Manter, 1940, Crassicutis Manter, 1936, Dactylotrema Bravo-Hollis & Manter, 1957, Marsupioacetabulum Yamaguti, 1952, Microcreadium Simer, 1929, Myzotus Manter, 1940, Neoapocreadium Siddiqi & Cable, 1960, Neomegasolena Siddiqi & Cable, 1960, Pancreadium Manter, 1954, Procaudotestis Szidat, 1954 and Trematobrien Dollfus, 1950. The Schistorchiinae comprises Schistorchis Luhe, 1906, Sphincterostoma Yamaguti, 1937, Sphincteristomum Oshmarin, Mamaev & Parukhin, 1961 and Megacreadium Nagaty, 1956. The Postporinae comprises only Postporus. A key to subfamilies and genera of the Apocreadiidae is provided. It is argued that there is no convincing basis for the recognition of the genus Apocreadium Manter, 1937 and all its constituent species are combined with Homalometron. The following new combinations are proposed for species previously recognised within Apocreadium: Homalometron balistis (Manter, 1947), H. caballeroi (Bravo-Hollis, 1953), H. cryptum (Overstreet, 1969), H. longisinosum (Manter, 1937), H. manteri (Overstreet, 1970), H. mexicanum (Manter, 1937) and H. vinodae (Ahmad, 1985). Apocreadium uroproctoferum Sogandares-Bernal, 1959 is found to lack a uroproct and is made a synonym of H. mexicanum. Homalometron verrunculi nom. nov. is proposed to replace the secondarily pre-occupied H. caballeroi Lamothe-Argumedo, 1965. Barbulostomum is made a synonym of Homalometron and H. cupuloris (Ramsey, 1965) n. comb. is proposed. Neochoanodera is made a synonym of Choanodera and Choanodera ghanensis (Fischthal & Thomas, 1970) n. comb. is proposed. Species within the Apocreadiinae and Postporinae are reviewed and the following are recorded or described from Australian fishes: Homalometron wrightae n. sp. from Achlyopa nigra (Macleay), H. synagris (Yamaguti, 1953) n. comb. from Scolopsis monogramma (Cuvier), H. stradbrokensis n. sp. from Gerres subfasciatus Cuvier, Marsupioacetabulum opallioderma n. sp. from G. subfasciatus, Neoapocreadium karwarensis (Hafeezullah, 1970) n. comb. from G. subfasciatus, N. splendens n. sp. from S. monogramma and Callohelmis pichelinae n. g., n. sp. from Hemigymnus melapterus (Bloch), H. fasciatus (Bloch), Stethojulis bandanensis (Bleeker) andChoerodon venustus (De Vis). Callohelmis is recognised by the combination of absence of tegumental spines, caeca terminating midway between the testes and posterior end of body, ventral sucker enclosed in a tegumental pouch, prominent muscles radiating through the body from the ventral sucker, vitelline follicles not extending into the forebody, and a very short excretory vesicle that opens ventrally. New combinations for species previously recognised within Crassicutis are proposed as follows: Neoapocreadium caranxi (Bilqees, 1976) n. comb., N. gerridis (Nahhas & Cable, 1964) n. comb., N. imtiazi (Ahmad, 1984) n. comb. and N. marina (Manter, 1947) n. comb. The host-specificity and zoogeography of the Apocreadiinae are considered.

A review of the Arhythmacanthidae (Acanthocephala) with a description of Heterosentis hirsutus n. sp. from Cnidoglanis macrocephala (Plotosidae) in Australia

Heterosentis hirsutus n. sp. is described from Cnidoglanis macrocephalo (Siluriformes: Plotosidae) from the Swan Estuary, Western Australia. It is distinguished by having 14 longitudinal rows of 6-7 hooks per row on the proboscis, a trunk armed anteriorly and posteriorly (=genital spines) with minute spines and lemnisci that may extend to the poster;or margin of the proboscis receptacle The new species also has prominent fragmented nuclei in its trunk well. New information is given for Heterosentis plotosi Yamoguti, 1935 from Plotosus lineatus (Siluriformes: Plotosidae) and H. poraplagusiarum (Nickol, 1972) Amin, 1985 from Paraplogusia guttata (Pleuronectiformes: Cynoglossidoe), both from Queensland. A key to the species of Heterosentis Van Cleave, 1931 is provided. The Arhythmacanthidae subfamilies are reviewed: there is little utility in the recognition of these taxa because of the small number of genera involved and the validity/ of the characters on which they ore based is in doubt, particularly whether trunk spines are present or absent. Only Acanthocephaloides Meyer, 1932, Breizocanthus Golvon, 1969, Euzetocanthus Golvan & Houin, 1964, Heterosentis, Hypoechinorhynchus Yamaguti, 1939 and Paracanthocepholoides Golvan, 1969 of the Arhythmacanthidae are considered valid. A key to these genera is provided. The monotypic genus Neocanthocepholoides Cable & Quick, 1954 is considered a new synonym of Acanthocephaloides thus creating Acanthocephaloides spinicaudatus (Cable & Quick, 1954) n. comb. Arhythmocanthus Yamaguti, 1935 is maintained as a synonym of Heterosentis because the distinction between two and three hook types is made equivocal when the transition between the opical and subapical hooks is gradual.

Asymmetric dimethylarginine endogenous inhibition of nitric oxide synthase causes differential vasculature effects

Background: Asymmetric dimethylarginine (ADMA), produced during protein metabolism, is an endogenous inhibitor of nitric oxide synthase, but little is known about its direct vasoactive properties in different arterial beds. Material/Methods: Segments of canine coronary, renal, and femoral arteries were pretreated with increasing concentrations of ADMA, and endothelial function was evaluated in organ chambers. Results: In precontracted canine coronary arteries, the highest concentrations of ADMA inhibited endothelium-dependent relaxation mediated by acetylcholine (n=7), but no concentration of ADMA inhibited receptor-independent relaxation mediated by calcium ionophore (n=7) (P<.001). The effect of ADMA on acetylcholine-mediated relaxation was shown to be competitive inhibition of the nitric oxide synthase pathway, because the addition of L-arginine (10(-3) M), but not D-arginine (101 M), reversed the effect produced by 10(-5) M ADMA. Further, ADMA did not alter endothelium-independent relaxation mediated by sodium nitroprusside (10(-9) to 10(-6) M; n=7). Femoral arteries (n=7) and renal arteries (n=7) were more sensitive to ADMA than were coronary arteries, and they demonstrated significant ADMA inhibition to receptor dependent relaxation induced by acetylcholine (P=.03 and P=.01, respectively) and to receptor-independent relaxation induced by calcium ionophore (P=.02 and P=.01, respectively). Conclusions: Endothelium-dependent relaxation mediated by ADMA is more marked in femoral and renal arteries than in coronary arteries. The response in coronary arteries may be overall protective. Considering these different effects in various artery types, the role of ADMA as a confiable and specific cardiovascular risk factor is questioned.