Desempenho de sistema composto por reatores anaeróbios em série seguido de filtro biológico percolador no tratamento de águas residuárias de suinocultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New molecular evidence supports the species status of Kaempfer's Woodpecker (Aves, Picidae)

ABSTRACT: Kaempfer's Woodpecker (Celeus obrieni) is the only species of the genus Celeus endemic to Brazil. The description of this taxon as a subspecies of the Rufous-headed Woodpecker (Celeus spectabilis) was based on a single specimen. While C. obrieni and C. spectabilis are now considered separate species based on morphological and limited molecular evidence, no study has critically tested the reciprocal monophyly and degree of evolutionary independence between these taxa with several specimens. Herein, fragments of the mitochondrial and nuclear DNA of three recently-collected specimens of C. obrieni were analyzed to evaluate the degree of evolutionary differentiation of this taxon with respect to C. spectabilis. The results confirm the reciprocal monophyly between the specimens of C. obrieni and C. spectabilis. The genetic divergence values for the two taxa also support their classification as independent species, given that they are greater than the values recorded among other closely-related but separate species of the same genus. Estimates of the divergence time between C. obrieni and C. spectabilis indicate that cladogenesis occurred in the mid-Pleistocene, during a period of major climatic fluctuations and landscape change, consistent with the hypothesis of a corridor of open bamboo dominated forests and woodland stretching.

Estudo do extrato pirolenhoso Biopirol® no manejo de nematóides em cana-de-açúcar, olerícolas e citros, em diferentes ambientes

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Projeto bambu: introdução de espécies, manejo, caracterização e aplicações

Este trabalho faz parte das exigências relativas a obtenção do título de livre docente na Universidade Estadual Paulista-Unesp. O projeto foi iniciado em 1994 com a introdução de espécies de bambu no campus local da Unesp visando o fornecimento de matéria-prima/colmos conhecida para estudos. Num processo contínuo, o projeto vem se desenvolvendo tecnicamente através de várias atividades ligadas a cadeia produtiva desta planta, envolvendo o acompanhamento do desenvolvimento das espécies, seu manejo, colheita, produção de mudas, tratamento, processamento, caracterização e aplicações. Estabelecido na Faculdade de Engenharia, o projeto naturalmente se aproximou das áreas de design e arquitetura, sendo estabelecida numa relação com estes cursos nos níveis de graduação e pós-graduação, com a participação e formação de alunos. Com aspecto multidisciplinar o projeto também procurou atuar na extensão universitária e na inserção social procurando transferir os conhecimentos adquiridos para a sociedade. Justifico a extensão do trabalho e o grande número de tabelas (deslocadas para os Anexos) e figuras mostrados pois na verdade o projeto procura mostrar a atuação em várias atividades: plantio de espécies, produção, manejo e acompanhamento do desenvolvimento, caracterização, processamento e desenvolvimento de produtos e aplicações, relação com alunos de graduação, pós-graduação e atividades de extensão. Relativamente ao trabalho de campo, foram introduzidas diversas espécies de bambu, sendo mostrados os dados de desenvolvimento, manejo e produção para duas delas, as espécies Dendrocalamus giganteus e Guadua angustifólia, ambas prioritárias, de fácil cultivo e produção de mudas e largamente utilizadas. Relativamente ao trabalho de laboratório, os colmos foram processados...

Vibração de plantas de pimenta (capsicum sp) para produção de frutos e sementes em ambiente protegido

Pós-graduação em Agronomia (Horticultura) - FCA

Substratos artificiais melhoram a qualidade da água em sistema de cultivo multitróficos e multiespaciais?

Pós-graduação em Aquicultura - FCAV

Efeito da diversidade de habitats sobre o desenvolvimento populacional do camarão-da-amazônia

Pós-graduação em Aquicultura - FCAV

Aplicabilidade da metodologia ecodesign à produção de calçados femininos

Pós-graduação em Design - FAAC

Metodologia de curvatura de bambu laminado colado (BLAC) para fabricação de mobiliário: diretrizes para o design

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Multiple Ornamental Uses of Costus stenophyllus Standl. & LO Williams

Costus stenophyllus or bamboo costus, despite its high ornamental potential, is still little known in the cut flower and ornamental plant market. The bamboo costus is a spiral ginger admired for its beautiful stems that are lined with brown colored alternating bands. This costus has rather straight and upright stems. Conical red inflorescences, which resemble the head of a snake, emerge from the base of the plants. The flowers are light yellow and emerge between the red scales on the rather long-lasting, attractive inflorescences. This study was carried out to evaluate the possibility of using these species as a garden plant, cut flower and cut stem. Thus, the characterization was made based on 28 characters of the plant, the leaves, the flower stem, the flowers, as well as season blooming characteristics and flower postharvest longevity.

Caracterização química, física e anatômica do bambu Guadua tagoara para polpação Kraft

Pós-graduação em Engenharia Mecânica - FEG

O canteiro experimental e o ensino

Não disponível

Estudo comparativo de dois tipos de painéis de MDP: com adição de papel impregnado e lâminas de bambu

This work is the production of two types of particle boards reconstructed MDP (Medium Density Particleboard), the first with the addition, in the inner layer of particles of impregnated paper, the ratios of 0%, 1%, 5% and 20 %. In the second type of panel MDP was inserted with blades of bamboo species Dendrocalumus giganteus as coatings and structural reinforcement. The MDP panel, used as a basis for both cases has the composition of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending, tension parallel and perpendicular, and testing of particle sizes of the particles did not exists in standard references. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests showed similar results indicating normative specifications in a positive way, the possibility of production of MDP with the use of waste paper impregnated. As for the panel with bamboo blades, the tests showed a mechanical performance far superior to MDP market, explaining the study and possible implementation of the bamboo for use where the MDP will suffer greater mechanical stress, such as doors, tops and benches tables

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

O potencial transformador das relações públicas comunitárias: um estudo de caso sobre o projeto de extensão Taquara

The present work refers to graduation media with specialization in Public Relations and intends to observe the potential for social transformation present in the work of the Community public relations and critical development of the profession in a community, from the perspective of economics concepts creative. Specifically highlights this practice in the community and region of Bauru from observation and evaluation of the work done by the author for two and a half years in project Taquara extension, along with Project Bamboo, which has bamboo as a focus of study and its extension actions. Encompasses the perceptions of the author on existing work in the third sector challenges and observes the realization of a participatory planning process and creating a communication plan as a contribution to the growth of the project